How to regenerate COSS table for work order operation planning hours
Hello,
I am looking for a SAP report or a custom solution to update the table COSS table from work order operation hours. Several work orders incorrectly updated in the table COSS with result the cost is incorrect.
For example: In the work order opertions, I have planned 2.5 hrs and in the table COSS it is 1.5.
Much appreciate for your help
Bill
It is quite simple actually.
As soon as your array exceeds SDU (defaults to 2048), sqlnet will fragment the packet. (see: sqlnet more data to client messages in your trace file)
As soon as the packet is bigger than your NICs MTU, the NIC will fragment the packet.
So, depending on the number of bytes for 1 record, high array size make sense or don't make sense.
And ideally SDU should be a multiple of MTU.
So do high arraysizes make sense? Usually not.
Hth
Sybrand Bakker
Senior Oracle DBA
Similar Messages
-
Can you please tell me what is the TABLE for 'Work Order'?
Regards,
Subhasishhi Subhasish Ganguly,
these are the tables of worked order which used in work order make and udates
AFIH, AUFM, PMCOQT, PMFLAGS, AFFL, AFKO, AFPO, AFVC .............
Hope i will help u.
with regard
chetan vishnoi -
FIND table for PM order operations
Hello,
I am looking for the table in which the notification number of pm order operations is stored.
I find table AFVC and AFVV but in this table I don't see notification number.
Thanks for your help.
Best regards,
SebFor PM Order, you can see :
- Notification number in header tabstrip
- Notification number in operations tabstrip (for each operation)
It is not the same number !
I have the following informations : AUFK, AFKO, AFVC.
For example, With IW32, I see operations tabstrip :
Operation Item Notifications Number
10 110000007
20 110000007
30 110000008
In AFVC, I see :
AUFPL VORNR
1000582892 10
1000582892 20
1000582892 30
AUFPL number is the same for all items operations in AFVC !
Thanks for your help. -
Table for process order and planned order in apo
I would like to know the table for stratagy profile for particular process order and planned order.
in /sapapo/rrp3 there is one filed RECEIPT/Reqt.Element ( process order ) for this field which table it is coming and i required particular strategy profile for that process order .
Please help me the table in apo.Hi Venkat,
This value is stored in structure /SAPAPO/RRP_ORDREQ_STR
under the field name EXTRA.
You can check the details of the same in transaction se11
Regards
R. Senthil Mareeswaran. -
1. Defining dependencies between Work order operations and Isolation Operation Steps
Hi All
Will you please let me know how i can define dependencies between Work order operations and
Isolation Operation Steps? Suppoose I want to have WAP--->WCA-->WCD at operation level, is it possible? Can we have the Switching of Status & allowing that perticular operation for releads. e.g. I have operation 1 in Maintenance WO Which needs machine where only operational control panel to be Locked & tagged. No Need to Tag total machine. So once i complete complete the taging for it & once give permits for it, system should permits only that much operation. Not all operation which may have some other permits which needs to be issued.
Regards
MakarandHi All
Will you please let me know how i can define dependencies between Work order operations and
Isolation Operation Steps? Suppoose I want to have WAP--->WCA-->WCD at operation level, is it possible? Can we have the Switching of Status & allowing that perticular operation for releads. e.g. I have operation 1 in Maintenance WO Which needs machine where only operational control panel to be Locked & tagged. No Need to Tag total machine. So once i complete complete the taging for it & once give permits for it, system should permits only that much operation. Not all operation which may have some other permits which needs to be issued.
Regards
Makarand -
How is functional location linked with work order tables
Hi, Experts:
I am working on a BW project to extract Plant Maintenance data from R/3 to BW system. We need to get work order data with related Functional Location data togather. When check the 2 tables AFIH for Work Order header and AUKF for Order master data, I don't see Functional Location field in neither of the 2 tables.
Can anyone please tell me how (by which table/field) Functional Location data in table IFLOT is linked to a Work Order stored in tables AFIH and AUKF?
Many Thanks,
JennyHi, Thyagarajan:
Thanks for the reply! I tried to get the values of ILOAN from table AFIH. And pass the value to the field ILOAN in ITOB. However, no data returned from ITOB. The ILOAN in AFIH has different set of values from the ILOAN in ITOB.
Any suggestions?
Thanks,
Jenny -
How to regenerate a table maintenance view for a table.
A new customer defined field(y_status) was added to the table(ykxrdarea). But the field is not reflected in the view maintenance.busiess adviced me to regenerate the table view maintenance.
Can any one help me how to regenerate the table view maintenance.Go to transaction SE11.Enter the table name and choose utilities from the menu and click on table maintenence generator.You will get the table maintenance dialog.Choose generated objects from the menu and click on change.You will get the change generation elements screen.Enter the reason for regeneration.In your case it is new field/sec.table in structure.hit enter and the table maintenance will be regenerated.If you go back and see the maintenance view now you should see your field.
cheers
Nishanth -
How to restrict the GR for Production Order when Goods Issue is not done
Hi Gurus
How to restrict the GR for Production Order when all the required components for production order are not issued with all required quantity. Even for partial issue system should not allow GR with 101. The user status with RMWA, RMWF & CGFB is not working.
Pls suggest best solution.
Abhijit.Hi,
You can club together the GI nad GR at the time of confirmation..
I.e Backflush for the components and auto GR for the Product.
So that you can stream line the Process.
The best Option would be to use the User Exit:
Enhancement - MBCF0002
Functional Module - EXIT_SAPMM07M_001
Include - ZXMBCU02
Refer below link for further details..
How to stop the goods receipt before issueing the goods for production orde
Regards,
Siva -
How to block material issue to work order
Dear Expert,
How do block material issue to work order when the item have been flag for deletion in MM module and have also been block for procurement and inventory in mm module.
Please helpHi,
Thank you for the prompt reply, what you mean by the Standard SAP? can you provide the reference link? I am facing the problem that the item material have been flag for deletion and been block for procurement and inventory in MM module material master data however it still able to material issue to work order. Any ideal how to block the material issue to work order when the material item have been flag for deletion and block for movement in MM material.
Please help. -
How to find system status for production orders?
How to find system status for production orders?
looked into table AUFK, AFKO and AFVC but none of these tables, carry
system status as part of the fields(STTXT)
I tried to filter in COOIS, but not much help
Able to find system status information in COHV,Is there any other way where
I can find system status information for production orders
Kindly guideHi,
Look into table, JEST, JSTO, AFPO & AFKO. CAUFV filed OBJNR, TJ02T filed ISTAT.
But, it is very difficult to combine the details like Order and System status.
Take the help of your ABAPer to generate Report for you.
Regards,
Siva -
Hello everyone,
In plant maintenance, does anyone know how to setup automatic settlement rule assignment for work orders? We know how to do it for internal orders already but the concept doesn't work for work orders. We are on release 4.6C
Thanks,
Chrishi
while maintaining the settlement profile you can define the default oject categors as CTR and in the equipment master you have to specify the cost center, and if you create maintenance order then settlement rule will be automatically created
if you want some specific cost center as default irrespectiv of equipment then you have to use the customer exit
IWO10027 User exit: Generate user-defined settlement rule
regards
thyagarajan -
Steps For Goods Receipt For Work Order Using Handling Units
Hello MM gurus,
I'm new to HU Management. Can you please share with me the steps for executing a "Goods Receipt For Work Order" using Handling Units?
I created a HU (1000000026), and then using transaction COWBHUWE I tried using that HU to create a goods receipt, but I keep getting the message below:
Handling unit 1000000026 is not provided for goods receipt
Message no. VHURM046
Do you have to assign/plan HUs to Process Orders first? I think the problem is that I'm not understanding the process or the requirements for a goods receipt for work order using HU.Hello Manish Kumar,
I've been doing Handling Units testing in our sandbox environment and I've been trying to Pack a Finished Product for a Process Order using
1-Transaction code HU02 to create the Handling Unit
2-Transaction COWBHUE after creating the HU to enter the production order number and the HU number and propose it, but the it doesn't work. When I propose it, nothing happens.
3.-I also tried COWBPACK, but for some reason, when I go into COWBPACK, key in the Process Order, and then press enter, I get the following message:
You do not have authorization to create handling units for plant BP08
Message no. VHUPD500
Do you know how to solve this issue? -
Table name& field name for production order & operation confirmation
Hi All,
I would like to know the table name and field name for the production order "confirmation" (CNF) and the operation confirmation (CNF).
Thanks and Regards,
PSSHi there,
CORU(R/3 Application development: PP Confirmations )
AFFW Goods movements with errors from confirmatio
AFRC Table of planned changes to conf.: Automatic
AFRD Default values for collective confirmation
AFRH Header information for confirmation pool
AFRP1 Table of planned changes to conf.: Automatic
AFRP2 Table of planned changes for confirmation: B
AFRP3 Table of planned changes for confirmation: C
AFRP4 Table of planned changes to confirmatn: Data
AFRU Order completion confirmations
AFWI Subsequently posted goods movements for conf
TAFWD CORU: Messages that are not interpreted as e
TCORD Table for field-dependent check routines
TCORU Parameters for order confirmations
TCORV Table with Routines for structureing variabl
TCORW Confirmation: Window Control
TPARU Control parallelized confirmation processes
TPRRU Control table for process chain for confirma
TPRRUT Text table for process control of confirmati
TRUGS User status caused by deviation
CO(R/3 Application development: PP Production orders )
AFBP CIM order: Batch print requests
AFFL Work order sequence
AFKO Order header data PP orders
AFPO Order item
AFVC Operation within an order
AFVU DB structure of the user fields of the opera
AFVV DB structure of the quantities/dates/values
FAPW Index of production-/issuing plant for produ
FTIND Missing parts index
ORDCOM Communication control Operation download
T024F Production scheduler
T399X Parameters dependent on order type
T441C Profile - availability check
T441CT Texts for Profile "Display Availability Chec
T490 Transactions PP - orders - order category
T496B CIM order: Assigning document types to refer
T496D CIM: Destination/lists/spool parameters per
T496F CIM order: Form description of the list
T496K CIM order: Entity table of possible table id
T496N CIM order: List descriptions
T496P Print PP documents: Determination of output
T496R Print PP shop papers: Report control
T496T Print PP shop papers: Transaction control
T496V PP Print: Default Value for Printing Online
T496Z CIM order: Table-controlled table access
TC32 Assigning subscreen to processing location
TC34 Allocating operation to object type for the
TC62 Sequence of detail screens when processing h
TCO01 Sequence/operations control in logicstics or
TCO03 CIM order: Texts for TCO01, Description of o
TCO04 Table for controlling the screen sequence gr
TCO05 CUA status depending on panel, trans. type,
TCO06 Exclusive functions for PP orders
TCO09 CIM order: Text IDs of objects in orders
TCO10 Valuation variant for order costing
TCO11 Control table for production orders - availa
TCO12 Control table production orders - stock dete
TCO36 PP orders: Control table for calling up pop-
TCO41 CIM order: Default values for generating ope
TCO43 PP-SFC order profile
TCO43T Description of production scheduler profile
TCO60 Sequence keys for input facility and verific
TCO61 Sequence key for PP orders
TCO62 Defining screen sequences for input facility
TCO63 Sequence of detail screens when maintaining
TCODB Database fields development class CO per ord
TCOF Profile for missing parts info system
TCOFF Profile for Missing Parts Info System: Displ
TCOFFT Texts for Missing Parts Info System: Display
TCOFG Profile for missing parts info system: crite
TCOFGT Texts for Missing Parts Info System: Criteri
TCOFK Texts for functions in milestones/trigger po
TCOFS Profile for Missing Parts Info System: Sort
TCOFST Texts for Missing Parts Info System: Sort Cr
TCOFT Texts for Missing Parts Info System
TCOKO Constants for PP orders
TCOKT Account assignment categories for order
TCOP Field selection profile
TCOPS Field selection profile
TCOPT Description of Profile for Field Selection
TDUMMY Dummy structure of a table for READ with VER
TRUG Reason for variances in completion confirmat
TRUGT Text describing the reason for a variance in
TXPR1 XPRA control - missing parts info system
Regards
Hemant G -
Table for purchase order status
Hello friends,
There's a tab STATUS in purchase order (tcoe ME21N).
I can't find a table which contains theses statuses.
Anybody knows what's the table for purchase orders status ??
Regards,
BahiaHi
PO status is stored in Structure not in the table.
Please use the List displays to get the information like ME2N,ME2L, ME2M, ME2K etc
You can also get the information from the table EKKO, EKPO, EKET,EKBE
Hope it helps
thanks/karthik -
How to create internal table for a structure in BSP
hi ,
I have created a Structure in BSP.I want to create an internal table for that Structure. But in my coding ie.
<% data: begin of itab_1 .
include type zuvendstr.
data:end of itab_1.
data wa_str like line of itab_1.
loop at itab_1 into wa_str. %>
<tr>
<td><%=wa_str-name%> </td>
<%endloop.%>
In this zuvendstr is Structure ,wa_str is workarea and itab_1 is an Internal table.But it is showinng an error that itab_1 is unknown.But we cannot define internal tables for an Structure in Page Attributes.So,please resolve how to create internal table for Structure in BSPSHi,
You can define itab_1 like this (assuming zuvendstr is a structure type):
DATA: itab_1 TYPE TABLE OF zuvendstr.
Regards,
Tanguy
Maybe you are looking for
-
After upgrading to Yosemite I can no longer upload to Facebook
Hi, After I upgraded my macbook pro to Yosemite a couple of days ago I can no longer upload photos to Facebook. After choosing the files and uploading I'm prompted with this message: Sorry, something went wrong. We're working on getting this fixed as
-
How to prevent B radio clients from connecting
How can I enforce only G & A radio clients from being able to connect to my 1131AG Access Points? I know that when a B client connects it automatically brings all the G clients down to B due to the fact that G is backward compatible but does not oper
-
Check writer XML not working.
We are using the oracle provided Check writer XML program for HR Payroll check printing. Check writer XML program is getting error ed out when we attach MICR font set up to the Check writer XML Template in template definition, works fine if we remove
-
Water and Imacs, ATA vs SATA, enclosures
I have a flat panel G4 into which water has leaked from the apartment above me, and now it won't start up. It was turned off at the time, and I've left it a few days to dry out but no luck so I guess that major damage has been done internally. I real
-
I am debating between the 15" and the 17". I record audio and video and stuff. Logic/Final Cut, etc... Do I need the expresscard/34 thing so I can do SATA? Do I use that for an external HD or for the interface? Give me advice. peace.