How to register External Adaptor Engine in SAP PI 7.0 to select ADE in IB?

Hi,
   I am Sreeramulu Konjeti, I installed PI 7.0 as standard alone system.But Adapter engine is not working, thats why i installed Adapter Engine separately...even I registered Adapter Engine in SLD...But i am un able to see that Adaptor Engine in Integration Directory.....please tell me what are the required steps to do if i want to see external adapter engine in Integration Builder.
Thanks & Regards
Sreeramulu Konjeti.

Did you followed this....
Importing Software Component Versions
[http://help.sap.com/saphelp_nw04/Helpdata/EN/32/306c15d227ca458216529d7a0472ff/frameset.htm]
If you did this I think you just need to add new object from Integration builder

Similar Messages

  • How to register External Adaptor Engine in SAP PI 7.0?

    Hi,
       I am Sreeramulu Konjeti, I installed PI 7.0 as standard alone system.But Adapter engine is not working, thats why i installed Adapter Engine separately...even I registered Adapter Engine in SLD...But i am un able to see that Adaptor Engine in Integration Directory.....please tell me what are the required steps to do if i want to see external adapter engine in Integration Builder.
    Thanks & Regards
    Sreeramulu Konjeti

    Hi,
    Check out the blog mentioned by prateek if my solution does not do the trick atleast his will surely do. https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/9874. [original link is broken] [original link is broken] [original link is broken]
    Rgds
    joel

  • How to register as a developer in SAP

    hi
    how to register as a developer in SAP,
    i got to make soe chages to the extract structure for that i need the access key.
    any one can please give me the required information.
    regards
    sampath.

    Hi,
    you need to goto the service marketplace http://www.service.sap.com
    There you can register as a developer in your system (you need the installation no. of your system for that -->system->status) and you get access key for sap objects if necessary.
    kind regards
    Siggi

  • How to Register as a Developer on SAP NetWeaver ABAP 7.02 Trial Version

    Hi Everyone,
    I was following a tutorial on ABAP and this centred on "Hello World" application. I got a message that I haven't been registered as a Developer on the system and that I need some code from OSS. I have tried checking here for any clues but it seemed none existed. Can't SAP be a bit more simplified like MS? It really requires lots of effort to get the right help and even at that, helps are not easily come by. I really which someone would point me in the right direction this time.
    Thank you.

    plz can u answer me to solve my problem... i download SAP Netweaver 7.02 and install it ...... when log on to SAP i can not make any think ..... SAP tell me You are not registered as a developer ... please register in the online service system (OSS). in the OSS you will receive an access key.
    i log on by
    DDIC and BCUSER
    and i have the same problem
    PLZ tell me how can registered my self as a developer on sap to get access key ..?

  • How to import external Transport request into  sap system

    Hi Gurus,
    I  have Transport request in the cofiles and data  files into one sap system
    how to import  those files into  another  sap system (those are different sap systems)
    could u tel anyone  any settings is required  and how to import Those Transport request.
    Any help is appreciated.
    Thanks in Advance

    Hi Siva,
    After copied the datafile  and cofile in the target system go to Tcode STMS> select the target system import queue,there you go to menu extras>other request-->add, give the request no and excute it.
    It will put the request in the que then you can import it to the target system.
    Thanks,
    Satyabrat

  • How to register external system in the solution manager SMSY ?

    Hi,
    I want to monitoring 1 of the external system in the customer landscape. i have done installing saposcol and sapagent in this server.
    but the i can't register this server in SMSY (Logical system) because always asking me to put installation number in the this system.
    since this system is not sap system so i can't put installation number because not space to key in the installation number.
    please advise ?
    Best Regards
    Fernand

    Hi,
    Check this link: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c006f999-da37-2a10-d0aa-8df9c7ed2d52
    Thanks
    Sunny

  • How to Access External PostgreSQL Database from SAP On Linux?

    Hi all!
    I have Linux-Orale11-ERP6.0. I need connect to an external database PostgreSQL on Linux. I installed the driver ODBC on Linux-Oracle11-ERP6.0 and command isql-v<alias> connect to PostgreSQL:
    root@sap etc# isql -v <alias>
    Connected!
    sql-statement
    help tablename
    quit
    SQL>
    How do I now configure the Oracle DB Link?

    I installed DG4ODBS.
    Configured initH2P.ora, listener.ora and tnsnames.ora.
    /oracle/DEV/112_64/hs/admin/initH2P.ora:
    # This is a sample agent init file that contains the HS parameters that are
    # needed for the Database Gateway for ODBC
    # HS init parameters
    HS_FDS_CONNECT_INFO = H2P
    HS_FDS_TRACE_LEVEL = OFF
    #HS_FDS_SHAREABLE_NAME = /usr/pgsql-9.0/lib/psqlodbc.so
    # ODBC specific environment variables
    #set ODBCINI=/etc/odbc.ini
    # Environment variables required for the non-Oracle system
    #set <envvar>=<value>
    /oracle/DEV/112_64/network/admin/listener.ora
    # Filename......: listener.ora
    # Created.......: created by SAP AG, R/3 Rel. >= 6.10
    # Name..........:
    # Date..........:
    # @(#) $Id: //bc/701-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/LISTENER.ORA#1 $
    ADMIN_RESTRICTIONS_LISTENER = on
    LISTENER =
      (ADDRESS_LIST =
            (ADDRESS =
              (PROTOCOL = IPC)
              (KEY = DEV.WORLD)
            (ADDRESS=
              (PROTOCOL = IPC)
              (KEY = DEV)
            (ADDRESS =
              (COMMUNITY = SAP.WORLD)
              (PROTOCOL = TCP)
              (HOST = sap-dev)
              (PORT = 1527)
    STARTUP_WAIT_TIME_LISTENER = 0
    CONNECT_TIMEOUT_LISTENER = 10
    TRACE_LEVEL_LISTENER = SUPPORT
    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (SID_NAME = DEV)
          (ORACLE_HOME = /oracle/DEV/112_64)
    #########I inserted###########
        (SID_DESC =
          (SID_NAME = H2P)
          (ORACLE_HOME = /oracle/DEV/112_64)
          (PROGRAM=dg4odbc)
    /oracle/DEV/112_64/network/admin/tnsnames.ora
    # Filename......: tnsnames.ora
    # Created.......: created by SAP AG, R/3 Rel. >= 6.10
    # Name..........:
    # Date..........:
    # @(#) $Id: //bc/701-1_REL/src/ins/SAPINST/impl/tpls/ora/ind/TNSNAMES.ORA#1 $
    DEV.WORLD=
      (DESCRIPTION =
        (ADDRESS_LIST =
            (ADDRESS =
              (COMMUNITY = SAP.WORLD)
              (PROTOCOL = TCP)
              (HOST = sap-dev)
              (PORT = 1527)
        (CONNECT_DATA =
           (SID = DEV)
           (GLOBAL_NAME = DEV.WORLD)
    #########I inserted###########
    H2P.WORLD  =
      (DESCRIPTION=
         (ADDRESS=
           (PROTOCOL=tcp)
           (HOST=77.120.107.XXX)
           (PORT=5432)
         (CONNECT_DATA=(SID=H2P))
         (HS=OK)
    And when I run: tnsping H2P,  I get an error:
    [root@sap admin]# tnsping H2P
    TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 29-AUG-2011 15:37:00
    Copyright (c) 1997, 2010, Oracle.  All rights reserved.
    Used parameter files:
    /usr/sap/DEV/SYS/profile/oracle/sqlnet.ora
    TNS-03505: Failed to resolve name
    Although:
    [root@sap admin]# tnsping DEV
    TNS Ping Utility for Linux: Version 11.2.0.2.0 - Production on 29-AUG-2011 16:38:07
    Copyright (c) 1997, 2010, Oracle.  All rights reserved.
    Used parameter files:
    /usr/sap/DEV/SYS/profile/oracle/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP) (HOST = sap-dev) (PORT = 1527))) (CONNECT_DATA = (SID = DEV) (GLOBAL_NAME = DEV.WORLD)))
    OK (10 msec)
    what am I doing wrong?

  • How to use External GSSAPI implementation? (SAP's gsskrb5.dll)

    Hi all,
    This is a request for help and/or tips (or any information that might bring me closer to a solution).
    Java has a standards compliant implementation of Kerberos for the GSS (Generic Security Services) API. However, Windows is not standards compliant out of the box, and requires a Registry setting to work ("allowtgtsessionkey"). That Registry setting degrades security.
    Instead of Java's default Kerberos implementation, I am looking into using an Open Source implementation of GSSAPI that talks to Windows in the way Windows expects, through Windows SSPI (Security Support Provider Interface). That implementation is called gsskrb5.dll and is a native Windows library: ftp://ftp.sap.com/pub/ietf-work/gssapi/gsskrb5/
    Does anyone have any tips on how I need to go about getting Java to use the external GSSAPI implementation (gsskrb5.dll) instead of its own internal one?
    So far, I have concluded the following:
    * I create a mechanism like this: Oid mechanism = new Oid("1.2.840.113554.1.2.2"); //specifies Kerberos, and is what gsskrb5.dll's author says is the correct Oid.
    * I call org.ietf.jgss.GSSManager.getInstance().createCredentials() with the above mechanism, but that fails for different reasons.
    * I beleive there is a problem with gsskrb5.dll not being used at all.
    * Just loading gsskrb5.dll with System.load() or System.loadLibrary() is not enough.
    * I think I need to either use one of the following, or create an alternative implementation that wraps gsskrb5.dll:
    ** sun.security.jgss.SunProvider
    ** sun.security.jgss.wrapper.SunNativeProvider
    It would be nice if I don't have to implement a JNI wrapper for gsskrb5.dll (even using JNA which seems good enough). If there is any way I can just "plug in" the correct configuration if Sun's classes are prepared for using an external implementation, would make me happy :))
    What do you guys think??
    Hugo Josefson
    +46 706 902 228
    www.jayway.com/opensource
    Founders of &Ouml;redev and Qi4J

    Hi Maurizio,
    i do it in this way:
    CONSTANTS: CMD_LS(50)   VALUE 'ls -al /transfer/sap'.
      DATA: BEGIN OF ITAB_LS OCCURS 0,
              LINE(200),
            END   OF ITAB_LS.
      CALL 'SYSTEM'
        ID 'COMMAND' FIELD CMD_LS
        ID 'TAB'     FIELD ITAB_LS-SYS.
    How do you write the file, via an UNIX-COMMAND than try the above call
    with your command.
    Another way is to write the file via OPEN DATASET ..., TRANSFER ... TO ..., CLOSE DATASET.
    If you mean this i can give you an example.
    Hope it helps.
    Regards, Dieter

  • How to find the J2EE Engine in SAP BI server

    Hi all,
    Can anyone explain how to search J2EE Engine installed in SAP BI Server, Where to check to conform that J2EE is installed..
    Thnaks in advance

    Hi Harish,
    Please have a look at the [help file|http://help.sap.com/saphelp_nw70/helpdata/en/43/e35b3315bb2d57e10000000a422035/content.htm] for info on BI Java.
    Regards,
    Raghu

  • How to register External table into Oracle APPS?

    hi
    can we register the External table in Oracle apps like SQL Loader?
    So if yes, please share the steps.
    Thx

    781261 wrote:
    okk..
    But i mean , we create Executable with Method type SQL Loader, to register in Oracle APPS.
    SO like what would be Executable Method for External Table?
    or can we call the External table in Procedure?
    ThanxI don't know oracle APPS (and this isn't the APPS forum), but an external table is just like another table. It's created once and then used by queries to fetch data. You would reference it in your applications just the same as you would any other table.

  • How to add external URL link to SAP object (Purchase Order, Invoice, etc)

    Hello,
    Is there any function module /BAPI that allows me to add an external URL link to a existing Purchase Order
    or Invoice document in R3 system?
    I tried to debug the system but have not found no suitable function module for it.
    I also analyzed the ABAP code of the small GUI window that allows to add a external URL link to
    a Purchase Order, and found the function module SO_OBJECT_INSERT. However I could not debug
    it (seems to be created with BOR objects) so I've no example for it.
    Please help!
    Regards,
    Manuel Dias

    CONSTANTS:
        c_http(36)    TYPE c VALUE '/BpHttpApis/slaphapi?ibmperson/(uid=',
        c_listxml(12) TYPE c VALUE ').list/byxml',
        c_value(5)    TYPE c VALUE 'value',
        c_cn(2)       TYPE c VALUE 'cn',
        c_mail(4)     TYPE c VALUE 'mail',
        c_em_num(19)  TYPE c VALUE 'managerserialnumber',
        c_em_cou(18)  TYPE c VALUE 'managercountrycode'.
      DATA  client          TYPE REF TO if_http_client.
      DATA  url             TYPE string.
      DATA  xbuffer         TYPE xstring.
      DATA  l_value         TYPE zchar2000.
      DATA  l_value_string  TYPE string.
      DATA  content         TYPE string .
      DATA  rows            TYPE STANDARD TABLE OF string.
      DATA  wa_rows         TYPE string .
      DATA  conv            TYPE REF TO cl_abap_conv_in_ce.
      DATA  ixml            TYPE REF TO if_ixml.
      DATA  streamfactory   TYPE REF TO if_ixml_stream_factory.
      DATA  parser          TYPE REF TO if_ixml_parser.
      DATA  istream         TYPE REF TO if_ixml_istream.
      DATA  document        TYPE REF TO if_ixml_document.
      DATA  node            TYPE REF TO if_ixml_node.
      DATA  xmldata         TYPE string.
      DATA  iterator        TYPE REF TO if_ixml_node_iterator.
      DATA  nodemap         TYPE REF TO if_ixml_named_node_map.
      DATA  attr            TYPE REF TO if_ixml_node.
      DATA  name            TYPE string.
      DATA  prefix          TYPE string.
      DATA  value           TYPE string.
      DATA  indent          TYPE i.
      DATA  count           TYPE i.
      DATA  index           TYPE i.
      url = 'http://bluepages.ibm.com'.
      CLEAR: l_value_string, l_value.
    ***Create the HTTP client
      CALL METHOD cl_http_client=>create_by_url
        EXPORTING
          url    = url
        IMPORTING
          client = client
        EXCEPTIONS
          OTHERS = 1.
      IF sy-subrc <> 0.
    Create the HTTP client failure, sy-subrc =
        MESSAGE i005(zm) WITH text-026 sy-subrc.
        EXIT.
      ENDIF.
      CONCATENATE c_http
                  p_accnt
                  p_couty
                  c_listxml
                  INTO l_value.
      l_value_string = l_value.
    ***Get employee information
      CALL METHOD client->request->set_header_field
        EXPORTING
          name  = '~request_uri'
          value = l_value_string.
      client->send( ).
      client->receive( ).
    ***Load to xstring
      CLEAR xbuffer .
      xbuffer = client->response->get_data( ).
      conv = cl_abap_conv_in_ce=>create( input = xbuffer ).
      conv->read( IMPORTING data = content ).
    create the ixml main factory
      ixml = cl_ixml=>create( ).
    create a stream factory
      streamfactory = ixml->create_stream_factory( ).
      xmldata = content.
    create a input stream
      istream  = streamfactory->create_istream_string( string = xmldata )
    create a ixml document
      document = ixml->create_document( ).
    create a xml parser
      parser  = ixml->create_parser( document       = document
                                     stream_factory = streamfactory
                                     istream        = istream ).
    parse the xml document into DOM tree
      IF parser->parse( ) <> 0.
    parse the xml document into DOM tree failure
        MESSAGE i005(zm) WITH text-027.
        EXIT.
      ELSE.
        node ?= document.
        IF node IS INITIAL.
    To be done
        ENDIF.
    create a node iterator
        iterator  = node->create_iterator( ).
    get current node
        node = iterator->get_next( ).
    loop over all nodes
        WHILE NOT node IS INITIAL.
          indent = node->get_height( ) * 2.
          indent = indent + 20.
          CASE node->get_type( ).
            WHEN if_ixml_node=>co_node_element.
          element node
              name    = node->get_name( ).
              nodemap = node->get_attributes( ).
              IF NOT nodemap IS INITIAL.
            attributes
                count = nodemap->get_length( ).
                DO count TIMES.
                  index  = sy-index - 1.
                  attr   = nodemap->get_item( index ).
                  name   = attr->get_name( ).
                  prefix = attr->get_namespace_prefix( ).
                  value  = attr->get_value( ).
                ENDDO.
              ENDIF.
            WHEN if_ixml_node=>co_node_text.
    User name
              IF name  = c_value AND
                 value = c_cn.
          text node
                value  = node->get_value( ).
                p_name = value.
              ENDIF.
    User email
              IF name  = c_value AND
                 value = c_mail.
          text node
                value  = node->get_value( ).
                p_email = value.
              ENDIF.
    Employ serial number
              IF name  = c_value AND
                 value = c_em_num.
          text node
                value  = node->get_value( ).
                p_em_num = value.
              ENDIF.
    Employ country code
              IF name = c_value AND
                 value = c_em_cou.
          text node
                value  = node->get_value( ).
                p_em_cou = value.
              ENDIF.
          ENDCASE.
      advance to next node
          node = iterator->get_next( ).
        ENDWHILE.
      ENDIF.

  • Indexing portal content by external search engine

    Hi All,
    I have a question about how to enable external search engine to index portal content.
    as I searched in sap help [Indexing Portal Content|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/46/9d1405fa743ef0e10000000a1553f7/frameset.htm]
    To enable public search engines, such as Google, to index portal content, provide the search engine with the following URL:
    irj/servlet/prt/portal/prtroot/com.sap.portal.utilities.tools.portalspider.SpiderWebInterface?
    How should I provide this above url to external search engine?
    Many thanks for all reply.
    Cheers,
    Kanok-on K.
    P.S. We use the default KM.

    Hi...
    Did you get any solution? Is it working now?
    I need same Information.... Please share if you have solved the issue.... and your site is indexed by search engine.
    Thanks,
    PradeeP

  • How to upload external bank statments.

    Hi,
    How to upload external bank statments in SAP B1 2005 B.and also procedure to do  BRS. please guide me.
    regds,
    sampath.

    Hi Sampath,
    You may check these threads to see if they can have any helps:
    Re: Bank Reconciliation Statement (BRS)
    bank reconciliation
    Thanks,
    Gordon

  • Rwb adaptor engine twice

    in my system RWB--> component monitoring two adaptor engines are there.
    how can i remove adaptor engine.

    Hi,
    Go to your exchange profile (http://hostname:port/exchangeProfile) and search for key hostname.
    Change all your hostnames to FQHNs (for example, change myhost to myhost.mycompany.com).
    Also, add your FQHN to the hosts file on the PI server. Restart the cluster and it should be OK.
    Regards,
    Gökhan

  • How to send External mail in sap HR workflow

    Hi experts,
         Anybody con tell me how  to send External mail in sap HR workflow ?
    Regards,
    Umesh.

    Hello,
    Check the workflow builder. There is a step type of "Send mail". Just put that into your workflow definition, and your workflow will send mail.
    Regards,
    Karri

Maybe you are looking for