How to remote logon to other client while developing ALE

hi,
     Iam just learning cross applications. i  have generated RFC..but how to check whether the connection is created??tell me how do remote logon.
thanks in advance.

Hi,
In RFC destination scrren (SM59), you will find  two buttons.
1. for test connection
2. for remote logon.
click any of them
Reddy

Similar Messages

  • How to delivery customizing to other client after installing SEM 6.0

    After i installed add-on component SEM 6.0 in client 000, i need to copy the delivery customizing to other existing client (for example 100).   Although i have checked note 337623, I still don't understand exactly what should i do?
    Any advise or any guide documents?
    Thank you .

    Hello,
    After you've installed SEM add-on in client 000 - it is available 'cross-client' in your system.
    E.g.:
    You have 3 standard clients (000, 001, 066) and client 100 (a copy from 000). You install add-on (any) it's standard delivery is immediately available in your system. The only thing you'd probably do (concerning BW) is maintain 'client' value in table RSADMINA:
    ta 'SE16' --> table 'RSADMINA' --> field 'BWMANDT' (Unique client in BW).
    BR
    P.S.
    Check SAP Note  [522569 - BW: Working in several clients (especially APO 4.x/SCM 4.x)|https://service.sap.com/sap/support/notes/522569]

  • How to connect back a disconnected client on an rmi server

    I am making a client -server rmi game .
    if a client get disconnected (throwing a remote exception on the server) how can I
    have some other client or same client continue from the the same point as it got disconnected.
    it obvioulsy requires state preservation but how?

    well actually I am making a game.
    if a player logs out during the game , when the server
    tries to pass it information it gets a remoteexception at the server.
    What I need is that any other player could replace this loggged out player and should get the latest state of the game ie latest score (while other players coud play as much as they can without him) , latest turn etc.
    The game is coded in an object which contains the lates turn and score etc, but how do I give it out to a new player joining in the middle of the game?
    Also if the server keeps thrwoing remoteexceptions ,
    it might hang or might haveto be shut down to be restarted.

  • Remote logon from client 001

    Hi Guys,
    Is it possible to remote logon from client 001 to other systems?
    to be moer clear, I have a SCM system client 001 and create a RFC destination to R/3 say client 600. Will it be possible to remote logon from SM59 to R/3?
    It is not happening for me. it is neither giving any error nor opening the logon screen. Or even logon. What am I missing?
    Points guaranteed.
    --Ragu

    Hi Ragu,
    It is possible to remote login from client 001 to other system clients.
    While you configuring make sure that the user must be having S_RFC autorisation object.
    In SM59 specify IP Adress insted of host name and check authontication test.
    If it is sucess user id password is correct and make sure that you have given Dialog/service user in SM59 logon& security tab.
    Thanks,
    Suraj

  • How do I make a RMI client running in Bea find a remote, non Bea, RMI server?

    On my stand alone test system I run a RMI server in one JVM,
    registry.exe and a RMI client in its own JVM. The client uses
    java.rmi.Naming.lookup() to find the RMI server, and this works fine.
    If I run the same RMI client class within Bea the naming lookup fails! I
    guess this is due to Bea using it own RMI registry rather than the
    registry.exe I started separately(?)
    QUESTION: How do I make a RMI client running in Bea find a remote,
    non-Bea, RMI server?
    Of course, in the final environment the server will run on a system
    remote from Bea.
    The RMI client calls are done from a servlet, not from a EJB.
    The doumentation about using RMI with Bea is focused on running the RMI
    server within Bea. This might be the "normal" thing to do, but in our
    case Bea is the client, not the server. Do I still need to use
    weblogic.rmi.*....? If so, where?
    Grateful for any tip.
    Göran Hagnell

    On my stand alone test system I run a RMI server in one JVM,
    registry.exe and a RMI client in its own JVM. The client uses
    java.rmi.Naming.lookup() to find the RMI server, and this works fine.
    If I run the same RMI client class within Bea the naming lookup fails! I
    guess this is due to Bea using it own RMI registry rather than the
    registry.exe I started separately(?)
    QUESTION: How do I make a RMI client running in Bea find a remote,
    non-Bea, RMI server?
    Of course, in the final environment the server will run on a system
    remote from Bea.
    The RMI client calls are done from a servlet, not from a EJB.
    The doumentation about using RMI with Bea is focused on running the RMI
    server within Bea. This might be the "normal" thing to do, but in our
    case Bea is the client, not the server. Do I still need to use
    weblogic.rmi.*....? If so, where?
    Grateful for any tip.
    Göran Hagnell

  • How to transport Minor changes in BPC 7.0 to other client

    Hi,
    I am very new to BPC and got an ticket to do a minor change in script logic. We are in BPC 7.0.
    I am not sure how I can transport this minor change from Dev to other client.
    My question is:
    1. Do we need to make system offline while making changes to Script logic in BPC Admin or it is required only at the time of collecting transport request in BI using tcode: UJBPCTR?
    It would be kind enough if any one could let me know What are all the activities we need to consider/take care before transporting objects from BPC DEV to BPC QUALITY
    Thanks in Advance.
    Regards, Trine

    You only need to take it offline when executing UJBPCTR and when importing in the target system.  The system willl collect all of the appset and transport it, but will do a delta calculation on the target system to determine if any structure changes are required.  The script logic data should simply be overwritten.
    Cheers,
    Rich Heilman

  • How to Transport OMT3R changes to other Clients.

    Hello All
    I have done the changes to MM01 Screen sequence using transaction OMT3R.
    But while saving it did not ask for transport request.
    Transport option is grayed out and not able to know include it to any transports.
    Can any one tell me how to inlcude this changes into a Transport Request and move it to other clients?
    Thanks & Regards
    Madhu K

    Hi Madhu,
    the values of tcode OMT3R ('Maintain Order of Main and Additional Screens') are saved in database table T133D ('Sequence Control forLogical Screens').
    If these values are missing on the target system, note 108059 ('Transport of Customizing settings made in OMT3') applies. Please proceed as described there to transport table T133D, too.
    Regards,
    Mauro

  • My performance is very slow when I run graphs. How do I increase the speed at which I can do other things while the data is being updated and displayed on the graphs?

    I am doing an an aquisition and displaying the data on graphs. When I run the program it is slow. I think because I have the number of scans to read associated with my scan rate. It takes the number of seconds I want to display on the chart times the scan rate and feeds that into the number of samples to read at a time from the AI read. The problem is that it stalls until the data points are aquired and displayed so I cannot click or change values on the front panel until the updates occur on the graph. What can I do to be able to help this?

    On Fri, 15 Aug 2003 11:55:03 -0500 (CDT), HAL wrote:
    >My performance is very slow when I run graphs. How do I increase the
    >speed at which I can do other things while the data is being updated
    >and displayed on the graphs?
    >
    >I am doing an an aquisition and displaying the data on graphs. When I
    >run the program it is slow. I think because I have the number of
    >scans to read associated with my scan rate. It takes the number of
    >seconds I want to display on the chart times the scan rate and feeds
    >that into the number of samples to read at a time from the AI read.
    >The problem is that it stalls until the data points are aquired and
    >displayed so I cannot click or change values on the front panel until
    >the updates occur on the graph. What can I do to be a
    ble to help
    >this?
    It may also be your graphics card. LabVIEW can max the CPU and you
    screen may not be refreshing very fast.
    --Ray
    "There are very few problems that cannot be solved by
    orders ending with 'or die.' " -Alistair J.R Young

  • Safari is slow to open and close. It also slows down other apps while running. Should I reload safari and if so, how do I do so?

    Safari is slow to open and close. It also slows down other apps while it is running. How can I resolve this issue?

    From the Safari menu bar, select
    Safari ▹ Preferences ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
    If you wish, you may be able to salvage the malfunctioning extension by uninstalling and reinstalling it. That will revert its settings to the defaults.
    If there's no improvement, continue as follows.
    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
    and confirm. Test.

  • How to copy Partner Procedure from Downstream Template to all other clients

    Hello,
    My problem is SAP std Partner procedures (e.g. OTR) is not available in our freshly installed IS Oil Client. I found out SAP note no. "100151 - TD Partner procedures in IS-Oil bulk shipment" which is identical to my problem. However the said note does not contain how to copy Partner Procedure-OTR from Downstream Template to all other clients.
    Can any one guide me in this area?
    Thanks & Regards,
    Aniruddha

    Hello Aniruddha,
    Partner determination configuration must be transported by creating a
    manual transport.
    Please refer to note 69385 and also notes listed in the "Related Notes" section for more details.
    Best Regards,
    Soumya

  • How to send the transport request from one client to other client?

    Hello Friends,
    I have generated one transport request in one of the client in Development server.Now as it is  customizing request so unless and until i transport it to other client within the same server, Changes will not be visible in other clients.So how to transport this customizing request from one client to other client within the same server.
    Thanking you guys in advance.
    Regards,
    Jitendra

    Hi Jitendra,
    Release your Transport Request via SE10, then go to STMS & import the request first to your quality server, then to your production server.
    Apologies for the incorrect inputs, please use SCC1 as advised by other forum members
    Hope the above clarifies your query.
    Regards,
    Vivek
    Edited by: Vivek on Mar 16, 2009 1:05 PM

  • How come the volume of other programs are lowered while one FaceTime? I exchange media with friends and colleagues and I can barely hear anything. There should be a way we can manually control the volume of different programs

    How come the volume of other programs are lowered while one FaceTime? I exchange media with friends and colleagues and I can barely hear anything. There should be a way we can manually control the volume of different programs

    I own the movies and I want them to stay in my iTunes library basically forever.
    But in both cases the file name no longer shows in the movie list, so I don't know how to re-download it from the Cloud.
    iTunes prefs > Store > Show iTunes in the Cloud purchases.
    This will show all your iTunes purchases in your library with a cloud icon down arrow. Click the icon to redownload or click on Play to stream without downloading.
    Also see this , -> Download past purchases
    and techncially, you don't "own" the movie, You simply have a license to use it.
    Yet the first thing iTunes does when you hit the delete key is tell you that it will remove the movie forever from all devices and the library.
    Actually, no it does not tell you that.
    FYI: You should keep copies of all yoru iTnue spurahses as the labels/movie studios/copyright owners can pull their product at anytime and it won't be available to redownload.
    Suggestions here -> http://www.apple.com/feedback/

  • How to stop hanging up or calling other numbers while in a call.

    My wife has the Droid 2 and she has been having continuous problems with the phone hanging up on her calls or dialing her voice mail while in a call.  I have had several calls hang up on me as well.  I have checked how she holds the phone to make sure the proximity sensor is working and everything appears fine.  She has even tried pressing the power/lock button as soon as she enters a call with no improvement.  Has anyone else seen this problem and what can be done to fix it?

    When speaking on the droid devices once the phone is placed to your ear the screen should go black and once you pull the phone away from your face it should light back up giving options to either make a call or hang up or other options.  If  you are still able to call while the phone is in use and the device is up to your face, try to do a battery pull by removing the battery while phone is powered on and let the battery stay out for about 10 to 15 seconds then replace the battery and see if there is still an issue with the device calling other people while the phone is in use. The next option if you are still having the issue to do a factory reset but make sure the SD card is removed before performing the factory reset here is the link for instructions on the factory reset http://search.vzw.com/?do=viewdoc&id=31308&p=null
    Hope this Helps

  • I lost my Iphone 5 today in Johor Bahru. Not install Find my Phone/Icloud/Offline. How to prevent others access my email and data ? Or how to remote lost mode/locking phone ?

    I lost my Iphone 5 today in Johor Bahru. Not install Find my Phone/Icloud/Offline. How to prevent others access my email and data ? Or how to remote lost mode/locking phone ?

    suyantosdf wrote:
    I lost my Iphone 5 today in Johor Bahru. Not install Find my Phone/Icloud/Offline. How to prevent others access my email and data ? Or how to remote lost mode/locking phone ?
    If you didn't enable find my iphone in icloud settings on your phone, then you can't do a lost mode or lock your phone.
    I would assume you had a passcode on your phone to lock it.  If you didn't then start changing your passwords.
    Report the lost to your phone carrier - local authorities.

  • How to Transfer Users fom CUA to Other Clients

    Hello Experts,
    Can anybody tell me the process to transfer Users From CUA to Other Client's?
    Pls let me know if  there is any Function Module to Transfer the Users from CUA to Other Client's or any other procedure to do this?
    Thanks in Advance.........

    Hi,
    you can find information about this in 'Transferring Users from New Systems': 
    http://sas00706.saspf.svc:1080/SAP_ERP_ECC_60_DE_neu/En/8c/b1b13bb3acd607e10000000a11402f/content.htm and in the SAP documentation 'Setting Up Central User Administration'.
    Regards Wolfrad

Maybe you are looking for