How to remove Requirement of SL in Delivery for a particular Sales area

Hi Friends
I have customised supplementary order type, delivery type and billing type. In supplemntary delivry item category, the relevance for picking, storage location required, determine storage location, fields are unchecked. It works well with a particular customr and for a particular sales area, particular materials. In delivery, we have PGI and saved delivery. Delivry did not have picking and it did not ask for any storage location.
But when I am trying to create the same supplementary order type for a different customer and different sales area and scrap material, the delivery has no picking but its asking for storage location to do PGI. Pls tell me what I have to do to remove the requiremnt for storage location in delivery for this particular sales area.
Thanks
sangeeta

Hi Bhaskar
In VL01N, in delivery item, for scrap material, item category is coming as ZSUP. Because the item category for delivery is also maintained as ZSUP. In this Item category, the fields mentioned below are deactivated.
Relevant for picking
SLOC required
Determine SLOC
In material master for scrap, in Sales org2, item category grp is NORM, like all other material.
Thus storage location is not supposed to come in VL01n as a required field.
But in delivery item category determination, i did not find this item category zsup. But when I was making supplementary delivery for other materials, the system did not ask any storage location and supplymentary delivery is duly created. here we delivering from an order not SA.
Thanks
Sangeeta

Similar Messages

How to remove "Ads by Media Player" using Chrome? Online solutions are for Windows

How to remove "Ads by Media Player" using Chrome? Online solutions are for Windows.
Having relentless pop up ads which open new browser windows. Searched all over for a Mac solution and can't seem to find one. Help please!?

http://www.adwaremedic.com/index.php
(Read the whole page to learn about adware!)

Delivery for a particular customer

Is it possible to create delivery for a particular
customer on specific dates we want? How we will do it in SAP if possible? thanks

Hi
Further...if you wish to create deliveries on different future dates, one more alternative is to create a SCHEDULING AGREEMENT with delivery dates and quantities given in the schedule lines. Based on the delivery date, it automatically wil be added in the delivery due list.
Thanks,
Ravi

How I set my Q5 so that reminders (for appointments, etc.) are displayed on my home screen?

How I set my Q5 so that reminders (for appointments, etc.) are displayed on my home screen?
Solved!
Go to Solution.

Swipe down from the top of your homescreen and select Settings>Notifications. Near the bottom you'll see in blue letters Lock Screen Settings. Click that and toggle Lock Screen Notifications to ON. Now whenever you have an appointment in your Calendar, it'll show up that day on your Lock Screen.
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

How to remove Country dropdownbox contents in Delivery Address screen.

Hi Experts,
I am trying to remove contents from Country dropdownbox in Edit Delivery/Shipto address screen in B2B scenario.
Can any one help me to know from where country values are displaying in dropdownbox and how to remove contents from the dropdownbox.
Thank you
Venkat

In Mail, you can also select a popped-up name that you don't want to retain, click the triangle that appears when you move your cursor to the area just after your name, and select "Remove from Previous Recipients List" from the dropdown menu. This choice will not appear if the name is in your Address Book.

How to remove a member from cluster while CQ (cq5.5) instances are running?

Hello,
I have a query:
how to remove a member from cluster while CQ instances are running? And is there any particular log to check that it got removed?
Thanks in advance..

I might be wrong. AFAIK you do not have the option to remove without shutting down and modfying cluster.properties.
However this usecase would be minimal because before going into production you would have verified your architecture.

Replenishment delivery for material with MRP areas and Avl Check

HI We have MRP area at storage location level maintained for materials. Stock exists in the plant in the storage location which is part of the MRP area.
Now when I create STO and try to create delivery for the same, system is giving message 0 stock available and not creating delivery. Material has 02 Avl Chck group.If I deactivate the MRP area in the material master, it allows creation of delivery.
How can I ensure that system creates delivery even though stocks exist in MRP area relevant sloc only in the plant?
Sriram

1) According to SAP when inbound deliveries are used and your delivery item category is set up for mvt type 101, these should be received with transaction VL32N. If you use MIGO/MB0A instead the GR status in the delivery will not be updated. If you then report on open deliveries you'll notice that nothing is received in the course of time. Amazing. Now if you set up the delivery item category without the movement type your inbound will not even be GR relevant. Just one of these things that's nice to be aware of.
Check note 199703.
may b it helps...

One line item delivery for 3rd party sales order

Hello Experts,
We have configured a 3rd party sales order process where the PR gets created. We are using scheduling agreement(PO) and creating Schedule line and doing a GR for partial line items. The stock is recieved as a Sales Order stock.
But when i create a Sales Delivery the delivery document copies all the line items (ieven for the ones which we don't have GR) from the sales order and we have to manually delete the line items from delivery doc.
Is there a way i can restrict the delivery document to only copy the line items from the sales order for which the sales order stock is available? If so how can we do that?
Appreicate your help.
Thanks
Arpita Rani

Hello All,
We have configured a 3rd party sales order process. The schedule line category is configured with account assignment categoory as "M". when we are creating GR the Moving average price of the material is not getting updated.
But if i replace with "E" it is getting updated, but the CO-PA is not getting generated for Profitability segment reporting.--we need profitability segment reportng.
Can some one tell me how we can update the moving average price using acc. asssignment category type "M" at the same time the Profitability segement information is updated.
THanks in advance
Appreciate your help
Arpita Rani

How to know whether a payroll has occured for a particular employee???

hi all,
i have a requirement like i need to pass a outbound file to XI. the record contains demographic as well as payroll data. the interface will runs twice a week there are demographic fieds as well as payroll fields.
payroll occurs bi weekly. as the interface runs twice weekly all the demogrphic data should be filled and payroll data should be space for the week payroll has not occured and it should fill with payroll data for the week payroll has occured .
i am using the FM's CU_READ_RGDI and PYXX_READ_PAYROLL_RESUL for getting payroll data.
my question is i need to run these FM's in my program only when the payroll has run how can i distinguish that paroll has occured for a pariticular employee?
is there any FM for that pls help??

Hello Shiva,
You can check the payroll status infotype(pa0003) for the particular employee (Field Accounted to).The last day of payroll is shown here.If your exists then you can continue with FM CU_RGDIR and PYXX_READ_PAYROLL_RESULT for getting the payroll results.
Reward points if useful.
Regards,
Manoj.

How , When and What is the significance of Business Partner's Sales Area Data?

Dear All,
What is the Sales Area data of busines partner , What is the significance of the same?
When it gets modified or extended?
How to maintain its configuration? How maintain its data!!
Hence i want to understand almost all about sales Area data of business partner.
Regards,
Dhruvin
Moderated: Please use the search before posting.
Message was edited by: Andrei Vishnevsky

Hello Dhruvin,
I think you shall have a look on the current help about this issue as it is a Complex ssue meaning "extense" and also one of the basic Points on the customizing and deployment of a CRM System:
Organizational Management in SAP CRM - SAP Library
Basically the Sales Area Data identifies your BP in your Sales Organization.
You define your sales organization so its fits your business requirements and real structure. f
Having this information properly defined helps to link data between SD and CRM so you can have for example: - The proper price for a customer when creating and Oportunity/ Sales Order.
- To restrict the access of the information of an employee.
Hope these hints help..
Regards

How to do a full load in DAC for a particular Module?

Hi,
We have one Execution plan loading all the BI Analytics module as of now.
1)Financials,
2)Procurement and Spend,
3)Supply Chain and Order Management and
4)EAM
Issue is if i go to Tools-->ETL Management-->Reset Data Sources in DAC, it refreshes dates for all the Tables in the warehouse. ( and hence full load for all the Modules happens when i start the execution plan)
I dont want full load for other modules, just want to do full load for a particular Module lets say EAM Module ( and also want to make sure that this particular full load doesnt create issues with the data for other modules)
Let me know how to achieve this.
Any help in this regard would be highly appreciated.
Thanks
Ashish

I can get a list of all the Facts and dimensions for a particular module from BI Apps Content guide... and then i can go and make refresh dates as Null for those Tables.
Now should i run the execution plan for one particular module or an Execution plan containing all the modules?
Cause i got this from someone..
"The Data models for the different modules have many common dimensions, so a reload of one module could leave the facts in another in an invalid state as the dimension keys would be moved.
Therefore it should not be expected that you can reload a module in isolation.
However, you can selectively do a reload of any table by resetting it's refresh date in the DAC console.
Then the DAC will determine the dependent objects that will also need a full load in order to maintain data consistency."
Thanks
Ashish

How to populate data in TargetCube from SourceCube for a particular product/currency dimension selected in form1.

Hi,
Need help regarding Business rule scenario "How to populate data in "Target Form (plantype2)" from "Source Form(plantype1)" for a particular product/currency dimension combination selected in form1"
Scenario 1) : I have data for Product(Computer)/Currency(USD) dimension combination in Source Form
When i open Target Form and then select a Product(Computer)/Currency(USD) combination and then right click on form to invoke a Business rule to get data for this same product/currency combination from Source Form.
Scenario 2) : If there isnt any data in Source Form for product(Computer)/Currency(USD) combination, then the data for product(computer)/Currency(Default Currency) to be populated into Target Form.
The members in Currency Dimension (Shared Dimension) are USD & Default Currency.
Can anyone please help.
Thanks,
Rajkumar

Adding to what Celvin Kattookaran has said
You can either write a Business Rule / Calculation script with @XREF function and also you can check condition if there is data in USD then populate USD else "Default currency"
If you want that data in source to be available in target, then you can use @XWRITE in a rule from source cube to push the data to Target.
Amarnath
ORACLE | Essbase

How to identify the project in CMOD used for a particular data source

Hi
I had a Business Content Data source which is enhanced with ZZ fields and user exit is written in CMOD.
How can i find in which project used to write the code for that particular data source.....
When i check CMOD i can find nearly 10 to 20 different projects
Thanks

Hi,
One simple way is goto CMOD and give project names with Z* or Y*. First findout the naming convensions following in your project and see.
Then gibe projects one by one and select COMPONENTS option and click on Display, if you find the following Function Exits means it is our DataSource project
EXIT_SAPLRSAP_001
EXIT_SAPLRSAP_002
EXIT_SAPLRSAP_003
EXIT_SAPLRSAP_004
Thanks
Reddy

How can we use same material code for two different sales area

Hello friendsu2026
Hope you all doing well
I am facing a problem and I will be thankful to all of you, for your suggestions
Issue:
I have a *material created in 3000/10/19 for domestic purpose *,now our company has decided to export it for that we have created a new sales are 3000/13/20 for export,we cannot create the salesa are as 3000/13/19 due to some company issues,
Is there any way how I can use the material already in 3000/10/19 into new sales area 3000/13/20.
Will common distribution channel and division concept will be applicable here
As the material is same,and we donu2019t want to go for any more new material code. *
Thanks
Siddharth Sharma

Hi Sharma,
when a material is used in domestic and exports.....i hope it should be seggreagated based on dist chnl.......but not division.
because material is Division specific. it can be there in only one division. like mother child relation.
that is the reason why...... it is maintained inside BASIC DATA...... but not in input screen while creating material master.[unlike dist chnl]
because a material can be in multiple dist chnl....but not multiple division.
I feel only alternative is creating new material if you are already decided to devide the sales by division for domestic and foriegn.
Purpose of common dist chnl/div is to maintain pricing/condition in one common whenever you change master data.......
hope this gives you the clarity
regards
Satya.SCM

How to force business to create Manual Invoice for a particular OM Trx Type

Hi Guru's,
How do i force business to create Manual Invoice for a particular OM Trx Type?For some order types,we dont want auto invoice to creae invoice automatically.business wanted to create manually.How do we achieve it.
Rgds,AP

Hello,
I think you should create new source ( type manual ) and transaction type ( I think you can use this you use in autoinvoice) in AR. After that you can create manual invoice.
Regards,
Luko

How to remove Requirement of SL in Delivery for a particular Sales area

Similar Messages

Maybe you are looking for