How to reprint a receipt

hi all
i bought some sound  cancelling headphones for the apple store in Sydney last year and i have lost the receipt, i live in the uk and need proof that i bought them from apple so i can send them back to get sorted. I have since then lost the receipt and i didn't get an email confirmation, is there any way to get one or from that store?
thanks dan 

Yes, I have tried to figure out what happen using the transaction analysis in the business process tab.
But I got....
Transaction  Reprint order
Reprint order not allowed by an active status
Error Message
E: BS 002  "Reprint order" is not allowed
I got no information which active status blocked the reprint process.
I have also looked into the setting of each active status
REL: RMND is not maintained in the transaction control
MSPT: RMND is set to no influence on business transaction
PCNF: RMND is not maintained in the transaction control
PRC: RMND is set to no influence on business transaction
BCRQ: RMND is set to no influence on business transaction
GMPS: RMND is set to no influence on business transaction
SETC: RMND is set to no influence on business transaction
Seems that...no active status has a setting which block reprinting the order.

Similar Messages

  • I have a business and I use iCal for all my appointments, how can I print receipts from my MacBook to a receipt printer? I want my clients to have a receipt of the services that they have paid for, can anyone HELP ME PLEASE?

    I have a business and I use iCal for all my appointments, how can I print receipts from my MacBook to a receipt printer?
    I want my clients to have a receipt of the services that they have paid for, can anyone HELP ME PLEASE?

    Well...I went to the modem (Westell, WireSpeed), found the NAT settings, once again, I'm WAY over my head, I am assuming this is a TCP connection (as opposed to a UDP) and per Lorex my mobile devices will use port 1025.  So I gave it a "global port range" of 1-10 and I indicated that the "base host port" was 80, 1025, & 9000 (ports 1,2,3).  When I selected the 'enable' it asked for a "host devise" my choices are my IPhone, IMac and the IP address for the dvr, so I choose the dvr.  I still cannot connect and canyouseeme still can NOT find these open ports.  This is taking up my whole day! I don't know how people figure this stuff out.

  • How to add a receipt number in the following Query for PO Report

    Hi Guys,
    I need a help regarding following query.
    Its a PO report for 11.5.10.2
    select distinct pv.segment1 supplier_number,
    pv.vendor_name supplier_name,
    pha.segment1 po_number,
    pha.revision_num revision_num,
    pha.authorization_status po_status,
    to_char(pha.creation_date, 'DD/MM/YYYY') creation_date,
    pha.currency_code currency_code,
    pla.sum_amount_ordered sum_amount_ordered,
    pda.sum_quantity_ordered sum_quantity_ordered,
    pda.sum_amount_received sum_amount_received,
    pda.sum_quantity_received sum_quantity_received,
    (pla.sum_amount_ordered - pda.sum_amount_received) sum_accrued, --AVI
    ( pda.sum_quantity_ordered - pda.sum_quantity_received) quantity_accrued, --AVi
    to_char(rsl.date_receipt, 'DD/MM/YYYY') date_receipt,
    -- rsl.receipt_num receipt_number,
    ppa.segment1 project_code, ppa.project_status_code, --10.0.0.4
    aia.invoice_num invoice_num,
    aia.invoice_date invoice_date, --AVI 
    aia.creation_date invoice_creation_date, --AVI 
    aia.amount invoice_amount_allocated_to_po, --AVI
    pla.purchase_basis,
    pla.category_id,
    -- pda.item_description,
    haou.name organisation, --10.0.0.3
    pda.sum_quantity_billed sum_quantity_billed , --10.0.0.3
    gcc1.CONCATENATED_SEGMENTS,
    gcc2.CONCATENATED_SEGMENTS
    from po_headers_all pha,
    po_vendors pv,
    pa_projects_all ppa,
    hr_all_organization_units haou,
    (select po_header_id,
    sum(quantity * unit_price) sum_amount_ordered,
    org_id,
    purchase_basis,
    category_id
    -- pla.item_description,
    from po_lines_all
    group by po_header_id, org_id
    , purchase_basis,
    category_id
    -- pla.item_description
    ) pla,
    (select pla.po_header_id,
    pda.project_id,
    sum(pda.quantity_ordered) sum_quantity_ordered,
    sum(pda.quantity_delivered * pla.unit_price) sum_amount_received,
    sum(pda.quantity_delivered) sum_quantity_received,
    sum(pda.quantity_billed) sum_quantity_billed, --10.0.0.3
    accrual_account_id
    from po_distributions_all pda, po_lines_all pla
    where pla.po_line_id = pda.po_line_id
    group by pla.po_header_id, pda.project_id,accrual_account_id
    ) pda,
    (select po_header_id, charge_account_id,
    -- rsh.receipt_num,
    min(rsl.creation_date) date_receipt
    from rcv_shipment_lines rsl
    where rsh.SHIPMENT_HEADER_ID=rsl.SHIPMENT_HEADER_ID
    group by po_header_id,charge_account_id
    ) rsl,
    (select distinct aia.invoice_num, pda.po_header_id , aia.invoice_date --10.0.0.3
    , aia.creation_date , sum(aida.amount) amount
    from po_distributions_all pda,
    ap_invoice_distributions_all aida,
    ap_invoices_all aia
    where pda.po_distribution_id = aida.po_distribution_id(+)
    and aia.invoice_id(+) = aida.invoice_id
    Group by
    aia.invoice_num, pda.po_header_id , aia.invoice_date --10.0.0.3
    , aia.creation_date) aia,
    (select haou2.organization_id, haou2.name
    from fnd_flex_value_sets ffvs,
    fnd_flex_value_norm_hierarchy ffvnh,
    fnd_flex_values_vl ffvv,
    hr_all_organization_units haou1,
    FND_FLEX_VALUE_CHILDREN_V ffvcv,
    hr_all_organization_units haou2
    where ffvs.FLEX_VALUE_SET_NAME = 'CAP_CODE_BU'
    and ffvs.FLEX_VALUE_SET_ID = ffvnh.flex_value_set_id
    and ffvnh.parent_flex_value like 'PO%'
    and ffvv.FLEX_VALUE_SET_ID = ffvnh.flex_value_set_id
    and ffvv.FLEX_VALUE between ffvnh.child_flex_value_low and ffvnh.child_flex_value_high
    and substr(haou1.name, 1, Instr(haou1.name, '-')) =
    substr(ffvv.DESCRIPTION, 1, Instr(ffvv.DESCRIPTION, '-'))
    and haou1.organization_id = fnd_global.org_id
    and ffvcv.parent_flex_value = ffvnh.parent_flex_value
    and ffvcv.flex_value_set_id = ffvs.flex_value_set_id
    and substr(haou2.name, 1, Instr(haou2.name, '-')) =
    substr(ffvcv.DESCRIPTION, 1, Instr(ffvcv.DESCRIPTION, '-'))
    union --10.0.0.1
    select f.organization_id, f.name --10.0.0.1
    from hr_all_organization_units f --10.0.0.1
    where f.organization_id = fnd_global.ORG_ID --10.0.0.1
    ) bu
    , po_line_locations_all plla --10.0.0.4
    , gl_code_combinations_kfv gcc1
    ,gl_code_combinations_kfv gcc2
    where pv.vendor_id = pha.vendor_id
    and pla.po_header_id = pha.po_header_id
    and pda.po_header_id = pha.po_header_id
    and pha.po_header_id = rsl.po_header_id(+)
    and pda.project_id = ppa.project_id(+)
    and pha.po_header_id = aia.po_header_id(+)
    and aia.po_header_id = pha.po_header_id
    and pla.org_id = haou.organization_id
    and pha.authorization_status in ('APPROVED', 'OPEN')
    and plla.po_header_id = pha.po_header_id --10.0.0.4
    and plla.closed_code in ('APPROVED', 'OPEN', 'CLOSED FOR INVOICE', 'CLOSED FOR RECEIVING', 'CANCELLED') --10.0.0.4
    and bu.organization_id = haou.organization_id
    AND gcc1.code_combination_id = pda.accrual_account_id
    AND gcc2.code_combination_id =rsl.CHARGE_ACCOUNT_ID
    In the following query I have commented receipt_num using the table rcv_transaction_headers.
    If I uncomment it the query results huge number of unexpected report.
    How can I add receipt number to the following query?
    Should I use rcv_transactions. If yes, what would be the join conditions.
    Kindly help as its urgent.
    Thanks in advance.
    Regards
    Avijit

    Sandeep is correct. I don't have time to tell you the correct query, but mine is something like this based on Sandeep's information:
    SELECT rsh.receipt_num
    FROM   rcv_transactions      rcvt,
           po_lines_all          pla,
           rcv_shipment_headers  rsh
    WHERE  rcvt.shipment_header_id   = rsh.shipment_header_id
    AND    rcvt.PO_LINE_ID          = pla.PO_LINE_ID
    AND    pla.item_id              = (select distinct inventory_item_id
    from mtl_system_items
    where segment1 = '1216107-2')

  • How to close goods receipt PO

    Hi All,
    We are using SAP 8.8
    how to close Goods Receipt PO that has been pulled to A/P Invoice with a partial amount of freight ?
    i.e.
    Our GRPO has freight 5000.
    On pressing COPY FROM button in A/P invoice we selected that GRPO
    On Pressing Customize button
    Items in the GRPO appear
    We selected all items and press next
    Freight appears
    We edited freight amount from 5000 to 3000 and pulled GRPO into invoice and saved.
    After this OUR GRPO and freight remains
    Guidance in this is really needed as we want to tally stock
    Thanks
    Malhaar

    Hi Malhaar......
    Does it happen all the time like this reversal of entry?
    Like how you tested in demo this kind of scenario I would suggest you to do this excercise too.
    So that you get knowledge about that and Today you are asking this doubt but after doing this excercise you will come to know the exact effect and next time you can suggest this to others if he has same problem and will become expert in SAP
    All the Best
    Regards,
    Rahul

  • How to reprint a check after reversing partial line items in F110

    Hi,
       I have run the payment process by using F110, for one vendor. The proposal and payment made for 2 open items. After the cheque print, we have realised that we need to make payment for one line item only. First I have voided the cheque, then thru FBRA, I have reversed one payment doument out 2, the one we need not pay now. Please guide me how to reprint the cheque for the let out payment line item?
    EX: 
    Vendor Lines:
    1. Open Item 1 - INR 2000
    2. Open Item 2 - INR 3000
    After payment process both the lines are take for proposal and later completed the payment run also.
    Both the Open Items are picked for payment and lines are cleared. A cheque has been printed for INR 5000.00
    By using FBRA I have reveresed 2nd line item.
    Vendor lines:
    1. Open Item 2 - INR 3000
    2.Cleared Item 1 - INR 2000
    I have not cancelled the payment ID and second line. Now please guide me how to take print out of cheque for the cleared        ( Paid) line Item for IN 2000.

    Hi,
    It is a lot more convenient if you delete your current proposal and rerun F110 for desired line items only.
    Regards,

  • How to reprint Mass POs

    Hi Guys
    I have one question
    How to reprint Mass POs more than 100 Purchase orders
    Thanks in advance
    SAP MM

    Hello,
    You can mass print all your 100 Purchase orders using transcation ME9F
    Go to transaction ME9F, enter the purchase order as much as possible with the help of multiple selection Tab. You have 'Set Filter' with the help of selection criteria like purchasing orgainsation, purchasing group, document type etc. Once done you can choose, Select all option in the application toolbar and click the print option.
    With this all selected PO will be printed.
    Note: Please check the processing status before executing the print
    BR,
    Tushar

  • How to post goods receipts from intra company two step scenario.

    Hi Guys,
    Intra company scenario between two plants of same company code.
    My process is as follow
    1. Created STO
    2. Created delivery doc through VL10B
    3. Did the PGI
    Once I post the PGI doc material status is goods in transit, from this stage I want to create goods receipts at receiving plant.
    Can any one suggest how to create goods receipts from material in transit position....
    Thanks and Regards
    Chandra Sekhar Alokam

    Dear Chandra Sekhar Alokam,
             You can follow std process to do GR using MIGO wrt: Outbound delivery document created in VL10B.
    in Intracompany STO-
    Go through the SAP Help, -
    [Cross-Company STO|http://help.sap.com/saphelp_47x200/helpdata/en/4d/2b90dc43ad11d189410000e829fbbd/frameset.htm]
                                              Movement Type - 645 ( one step) & 643(two step)
    Regards,
    Reazuddin MD

  • How to make good receipt?

    how to make good receipt for material?

    Hi,
    Create it with <b>MB01</b> Transaction
    Have a look at this one
    http://help.sap.com/saphelp_erp2005/helpdata/en/eb/13750743c411d1896f0000e8322d00/frameset.htm

  • How to set return receipt

    how to use return receipt with Firefox e-mail

    Firefox doesn't do email. That is a question for support at your web-mail provider.

  • How to reprint a posted GR document

    hello guys:
    During execute GR by MIGO, normally we tick the Print option to let the document printed after posting. But in same cases, the user forgets to choose the option, then of cource no document is printed.
    The question is: in such case, how to reprint the posted GR document? I can not find a standard transaction to do so.
    Regards.
    Andy

    Hi Andy,
    The only way I know of doing this is to go to the Messages screen for the first item on the document via MB02, and manually add the output type details to the document.
    You will need to look at a document that printed successfully to get the appropriate output type, medium, partner, and communication method.
    Regards,
    Monika

  • How to Verifying Store Receipts for Mac

    I don't know how to verifying store receipts for mac.
    When and Where to check verifying store receipts?
    This is my code.  Is it correct ?  and Where to check receipts?  and how to verifying store receipts? 
    Please help me.
    1 .
    if (   [SKPaymentQueue canMakePayments] )
    2. SKProductsRequest *request =  [[SKProductsRequest alloc] initWithProductIdentifiers:[NSSet setWithObject:@"com.mac.point500"]];
       request.delegate=self;
       [request start];
    3.
    -(void)productsRequest:(SKProductsRequest *)request didReceiveResponse:(SKProductsResponse *)response{
       SKProduct *product = [response.products objectAtIndex:0];
       NSLog(@"Title : %@", product.localizedTitle);
       NSLog(@"Description : %@", product.localizedDescription);
       NSLog(@"Price : %@", product.price);
      [[SKPaymentQueue defaultQueue] addTransactionObserver:self];
       SKPayment *payment = [SKPayment paymentWithProduct:product];
       [[SKPaymentQueue defaultQueue] addPayment:payment];
    4.
    - (void)paymentQueue:(SKPaymentQueue *)queue updatedTransactions:(NSArray *)transactions{
              for(SKPaymentTransaction *transaction in transactions){
                        switch(transaction.transactionState)
                case SKPaymentTransactionStatePurchasing:
                           break;
                case SKPaymentTransactionStatePurchased:
                      [self purchasedTransaction:transaction];
                                                 break;
                case SKPaymentTransactionStateFailed:
                      [self failedTransaction:transaction];
                                                 break;
                case SKPaymentTransactionStateRestored:
                      [self restoreTransaction:transaction];
                                                 break;
                default:
                                                 break;
    5.
    -(void)purchasedTransaction:(SKPaymentTransaction *)transaction
         m_point +=  500 ; // purchase success.
         [[SKPaymentQueue defaultQueue] finishTransaction:transaction];
    6.
    - (void)paymentQueue:(SKPaymentQueue *)queue removedTransactions:(NSArray *)transactions

    MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro 
    https://discussions.apple.com/community/mac_os?view=discussions
    http://www.apple.com/support/macbookpro

  • Anybody know how to get a receipt of an inapp purchase from your ipad?

    I'm try to get a receipt of an inapp purchase and mobages instructions don't seem to apply for people using iPads. Anybody know how to get a receipt?

    Receipts for any purchase, even in-app purchases or free downloads, are sent automatically to the email address associated with your Apple ID. If you deleted the email or didn't get such a receipt and it's been more than two-three days, then you will have to go to your Purchase History, and that is only possible on a computer, so you'll need to use a friends or perhaps get help at an Apple Store.
    Otherwise you'll have to contact the iTunes Store and ask if they can resend the receipt. Go here:
    http://www.apple.com/support/itunes/contact/
    and follow the instructions to contact them.
    Regards.

  • How i get a receipt for iOS Developer Program renew

    I renew iOS Developer Program on apple website and I got the tax invoice by email. I cannot use tax invoice for clear cash with my company.
    How I get a receipt from Apple?

    Use your credit card bill.

  • How to reprint the HU Labels

    Hi,
    How to reprint the HU Label.
    Thanks & Regards,
    Vallamuthu

    Hi,
    HU03 --> menu Extras --> Output
    Regards,
    Przemysław

  • How to unapply AR Receipt partially

    Hi All,
    how to unapply AR receipt against invoice partially .
    Say Invoice has only one line and invoice amount = 100 Rs ,and this invoice has receipt for 100 Rs.
    Now i want to unapply this receipt for amount say Rs.50( Partially ).
    I can very well do this from Front end by just going to Receipt and update the amount field.
    I tried of using api AR_RECEIPT_API_PUB.unapply ...but this API is fully unapplying the amount.but i want partial unapply.
    Thanks in Advance
    Surfraz

    bit tricky..
    Create 2 line with your API, the one line is what tha amount you want to apply and keep other line with total payment amount - amount in Line
    Once 2 line get create, apply one line with you invoice of 100 Rs, this way
    you can find
    Orginal Invoice amt =100
    Invoice amount =50(as you clear 50 )
    Unapplied =50
    Applied =50
    This is very common way , dependes ON HOW business is done.
    When ever there is integtaion with POS such kind of activity is very common.
    1)spliting the amount
    2)amount with different payment media
    3)One amount applying with Multiple invoice
    4)amount with multiple media with Multiple invoice for multiple customer
    like wise...

Maybe you are looking for