How to reserve the material ( Make to Stock) for selective customers?

Dear Friends,
I want to reserve the material which is a Make to Stock for selective customers i.e if the customer base is 100 I want to reserve the certain quantity for 3 customers.
It is a Make to Stock.
Thanks in advance.
Regards,
Shrikant

Dear Friend
First you have to create sales orders for these three customers
There are three ways of doing this
1. T code MB1B use movement type 412 E and input your sales order no
Stocks will be reserved for this order
Your item category should be marked E in special stock indicator
This is the perfect way of doiung it
Suppose if the order gets cancelled stocks can be moved back to unrestricted using T code MB1B use movement type 411 E
2.Create sales order and then delivery and save dont do picking and PGI
Stocks will be reserved for this delivery
3.In t code OVZ9 if you have ticked include sales requirements then for whatever sales orders created stocks will be reserved for them
But this is soft way of handling as thro backorder processing the stocks can be allocated to other orders
Regards
Raja

Similar Messages

How to change the "Photography Plan" to "Complete - For New Customers Plan"?

I've subscribed to "Photography plan" only yesterday but actually changed my mind and would like to go for the "Complete - For new customers" plan. How is it possible to switch?

You need to contact support to check if it can be done. I have send you a personal message, please & respond.
You can contact our support team directly at Contact Customer Care to cancel your membership. If you are not seeing an option to speak with a member of our support team then please utilize a different web browser.
Regards
Rajshree

How to find the material received in warehouse for work order through table

Dear All ,
I am creating alerting system We have requrirement that if the notification or work order is pending for 10 days then alert to be sent to planner and 20 days to his senior and 30n days to his senior
We have created FM for this every day program will run and check open work orders and notification pending for some days
Now my question in the FM I want to add fields for material receipt
Idea is say for refuebsihment order pending material is received in warehouse now when this is received alert to be send in the work order planner that material is arrived
From which tables I can track this and how to know for the alerting system that material is arrived in warehouse so alert to be send
please reply
Regards
pratap
Edited by: Pratap bhikai Ingole on Jun 5, 2010 9:20 AM

Hi ,
With reference to your second point , if your looking for some alret then whenever you have goods receipt or goods issue of stock material you can have a mail triggerred through workflow .. in our project what we did was , we had a user status ALMR - All Material received and this is SET by a Z programme which checks whether all stock materials or non stock materials against the order have been received and sets the user status and this programme is run as a batch job with 30min frequency ....
regrds
pushpa

How to alter the materialized view defintion with -- For update clause

My db version is 9.2.0.3
My orginal materialized view difination does not have "for update " clause.
how can i alter the mview defination to inclused and exclude the "for update" clause.
I dont want to drop and recreate the mview with for update clause. But I what to change the existing definition.
Please suggest.
Thanks
Naveen.

I already have the view definition in place. I want to change the exising defination, by adding the "for update " clause. Is it possible with any " alter mview ... " syntax.
Below is my existing syntax. I don't what to drop and recreate. Just want to alter the existing definition , with for update clause.
create materialized view test
pctfree 0
tablespace DATA storage (pctincrease 0)
build immediate refresh start with sysdate next (trunc(sysdate+1) +1/24)
with primary key
disable query rewrite
as select * from test@isource;
Please suggest!
Thanks
Naveen
Edited by: user12096071 on Apr 8, 2010 2:56 PM

How to see the material document for Blocked stock

Hello Experts
I having some blocked stock in plant X , How to see the material document for this stock.
Thanks in Advance
Prashanth.v
Edited by: prashanth.venkategowda on Aug 11, 2010 7:38 PM

which material documents do you want to see?
Material documents can be found and displayed in MB51 transaction.
in MMBE you can put the cursor onto your stock line and then choose from menu Environment > material documents and SAP will list all relevant material documents.
block stock status is not a selection criteria, material number, plant storage location, batch number are selection criterias.
if you want only documents to block stock, then you need to select by movement type, e.g. 343 and 344 are movements that change status from unrestricted to blocked or vica versa.

Required reference document to issue the material from project stock

Hi All,
we have procure the project stock material with Acct. assignment Grp as "Q", now the material is laying in project stock.
the things is we can issue the warehouse material with reference to Project Reservation similarly my client wanted to use some SAP document for records purpose to issue the material from project stock.
i have checked this functionality in SAP which is not available except straight way issuing the material from project stock using MB1A( 221 Q).
please help me out to resolve this requirent.
manoj singh
we can

Hi,
Did you implement PS module in your system? How were your project stocks reserved?
Cheers,
HT

How to put configurable material in finished stock???

Hi
How to put configurable material in finished stock?? wt is transaction code??or is there any different process for that?????????//

Hi
In Variant Configuration Scenario stock will be maintained for the material variants not for the K-mat directly. Certain Material Variants will be Produced and Kept in stock before a sales order will be raised by customer for the K-mat
Material Variant Creation Steps (Material variants are the stockable items in VC Scenario)
1) Create a MV with Material type FERT and Stg 10 or 40 (Classification view not essential)
2) Assign the K-mat material to this MV in Basic data - 2 view in Cross Plant CM field and click on Configure variant tab to select the fixed char value combination for this MV. Do the same steps in MRP-III view
Regards
Brahmaji
Edited by: Brahmaji Devarapalli on May 13, 2009 7:32 PM

How to do the hard allocation of stocks to a cuatomer/group.

Hi All,
We are live on ECC 6.0 (IS Retail)
Business wants to allocate some stocks of certain material to a particular customer/customers group (customer chain) so that when customer places an order for the article it will always be available.
The material is also purchased by other customers on an as and when basis. The reserved element of stock is not available to other customers. When the customer for whom it is reserved places an order the stock should be automatically confirmed for that sales order
We have configured the product allocation process, but the limitation of this process are:
u2022Product allocation just specifies a maximum number for an object.This
must be maintained at client level i.e if you just want to maintain for
one chain code (group of customers), you still have to maintain for all
chain codes in all the sales areas for the object (irrespective of
whether you want to or not, at least using the masking character)
u2022Unless the maximum level is reached, orders will still be confirmed on
first-come-first serve basis. i.e there is no hard allocation; if there
is shortage, other customers can take the article though you might have
specified a "maximum number" for customerXXX and customerXXX might not
get the article. As said earlier, the check is "if the customer has
exceeded his quota!"
u2022Our requirement is for a kind of "hard allocation" which is almost
impossible to achieve using Product allocation.
We have configured consignment fill up process also, but the limitation is the fill up is for a particular customer,we cannot do it for customer chain (group of customers)
Please share any ideas to overcome the above issues to achieve the hard stock allocation.

Thanks for your reply Mauryan,
Could you please explain the process a bit (Product allocation with Back order processing). Below is my business process.
There are 5 major customers and I want to allocate stock for one particular customer. for example, total unrestricted stock is 1000 cases, from that I want to allocate 300 cases to customer A and I should be able to invoice 300 cases to this customer as an when the order comes, no other customer is allowed to consume that allocated stock, even after the customer order quantity for other 4 customers are more than 700.
Thanks & Regards,
Niyas

CIN: How to check the material document posted without excise invoice

Hi Guru,
Please advise how to check the material document posted without excise invoice.
I have tried tcode J1I7 but it seems start to collect the excise invoice first and then material document.
But my case is to find the material document WITHOUT excise invoice for internal tracking purpose.
At the moment we start from tcode MB51 to get the list of material document and check in J_1IEXCHDR / J_1IEXCDTL
Best regards,
Pakorn

Hi,
Try creating a Query in Tcode SQVI by combining tables MKPF and J_1IEXCHDR/J_1IEXCDTL for your requirement.
Check these threads how to create Query.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6018c1ae-8c44-2d10-6ea9-c3fad2c82880?QuickLink=index&…
http://ptgmedia.pearsoncmg.com/images/9780672329029/samplechapter/0672329026_CH03.pdf
Regards
Binoy

How to maintain the material master data in plant

Hi all,
while creating BOM I am getting an error "no material master data in plant' can some one help me how to maintain the material master data in plant
Regards,
Balu

Check the material available in MARC table in SE11 transaction against your plant.If it is not available please maintain through MM01 transaction.

How to Block the material

Hi friends,
How to block the material ,
what are the implecations if we block a material?
Regards
Krishna

Hi,
The best way is to keep the materail status with deleted or blocked for puchase / sales and need to maintain in the materail master.
You cannot delete the material from material master until archiving but you can block that material for any procurement
Goto Basic data 1
X-plant matl status -
01 Blocked for procment/whse
02 Blocked for task list/BOM
10 Blocked for MRP
Select any one.
Valid from -
Here you enter valid date from which the material should be blocked.
So from this your material will be blocked for any PR/PO/any transactions related to Procurement
BR,
Krishna

How to create the material using outbound IDOC

Hi all,
how to create the material using outbound IDOC.

Hi..
follow the steps...
1) create a partner profile for material
2) create a material
3) go to transaction BD10 , give material no and then execute.
4) go to transaction WE02 to chk the status.
if you want to send Outbound idoc automatically once the material is cretaed then use change pointers concept.
please get back to me if you need any assisstance further.
Regards,
Lokeswari.

How to maintain alternative material in a BOM for a component.

how to maintain alternative material in a BOM for a component.if stock for existing bom component is less then it should consider other alternative material in the same BOM

HI,
You can maintain alternate material for BOM Component by specifying Alternate Item group as below;
Go to CS03/CS02--> Items-> Select Component and go to details->Basic Data Tab--> General Data
Pls. find more details about Alternate Item group maintainance as below:
Alternative item: group
Consolidation of alternative items within a BOM. Every material in the assembly can be included in the alternative item group.
Use
As soon as you enter an alternative item group, you see an additional dialog box with the following data: ranking order, strategy, usage probability.
You can maintain alternative items in the following situations:
Alternative positions with specific usage probability
These alternative items are incorporated with a specific usage probability. Enter the usage probability for each alternative item in the group, so that:
dependent requirements are determined in requirements planning
dependent requirements are changed to a reservation in the production order
Alternative positions as information
You can enter an alternative item for information purposes. This item would then, for example, only be taken into account in situations involving missing parts.
As there should be neither dependent requirements nor a reservation for this item, enter no usage probability.
Procedure
Enter the same character string to denote the alternative items of an alternative item group.
Enter the same strategy for all alternative items in the alternative item group.
Dependencies
Alternative items are valuated in the following way:
Dependent requirements determination
Requirements planning determines the dependent requirements according to the usage probabilities that have been entered.
If the usage probability is 0%, then no procurement is planned for the item. For information purposes, however, dependent requirements with 0 as quantity are created.
Withdrawal posting
You can control the withdrawal posting for the resevation in the production order in the following way:
Withdrawal according to usage probability (manual change is possible)
Withdrawal if there is 100% availability
(Check ranking order and strategy)
Example: See Strategy for alternative position
Further you can also maintain alternate material if you want to stop using this material at certain time as below:
In material master of the material ,
Go to MRP-4 View----> Under Discongtinued parts specify
Discontinuation Indicator
Eff-out.
Follow-up matl
So system will automatically consider follow up material in BOM as per the settings you have maintained for the material to be replaced.
Hope this helps.
Regards,
Tejas

How to find the number of fetched lines from select statement

Hi Experts,
Can you tell me how to find the number of fetched lines from select statements..
and one more thing is can you tell me how to check the written select statement or written statement is correct or not????
Thanks in advance
santosh

Hi,
Look for the system field SY_TABIX. That will contain the number of records which have been put into an internal table through a select statement.
For ex:
data: itab type mara occurs 0 with header line.
Select * from mara into table itab.
Write: Sy-tabix.
This will give you the number of entries that has been selected.
I am not sure what you mean by the second question. If you can let me know what you need then we might have a solution.
Hope this helps,
Sudhi
Message was edited by:
Sudhindra Chandrashekar

How to find the number of idocs generated for a customer on the basis of his purchase order in a day ?

How to find the number of idocs generated for a customer on the basis of his purchase order in a day ?

Dear Friends,
I am absolutely agree with your answer .
But my question is,
Lets say.....
One customer sending X number of purchase orders in a day , so how many IDocs generated on that specific day for that specific customer .
So, Question is , How can we find the no of sales orders(IDocs) generated for the customers on the specific day ?
Hope you all understood my requirement .
Thanks & Regards,
Aditya

How to reserve the material ( Make to Stock) for selective customers?

Similar Messages

Maybe you are looking for