How to restrict f4 help values in select options of Employee Search

Hi,
I am using HRASR_EMPLOYEE_SEARCH for employee search and created a new query ,infoset , usergroup which is responsible to fetch the selection criteria and result.I have one field in the search criteria as Cost Center which is connected to P0001-KOSTL.f4 help for that field fetches all the values(Local cost center,starts with M and Global Cost Center,starts with G)
I want to filter out the f4 values in WDA so that it can fetch values only starts with G
Thanks
Bala Duvvuri

Hi Bala,
Do you mean to say that when the user gets the OVS popup he should be able to use wildcard characters like G* in there? If thats your requirement then thats quite possible. You can do this within the phase 2 of the OVS. You first read the values that were entered by the user in the restriction screen by saying something like:
assign ovs_callback_object->query_parameters->* to <ls_query_params>.
You then fetch the desired attribute into a local variable like:
lv_matnr = <ls_query_params>-matnr.
Then you can say like:
REPLACE ALL OCCURRENCES OF '*' IN lv_matnr WITH '%' .
SELECT <your fields> FROM <table> INTO TABLE lt_select_list WHERE MATNR LIKE lv_matnr.
Hope that this is clear for you now. You can also try go through this [full example|http://****************/Tutorials/WebDynproABAP/OVS/page1.htm] where they have explained the same concept using step-by-step screenshots.
Regards,
Uday

Similar Messages

Restrict F4 help values for select option

Hi All,
How to restrict the F4 help for select option in Webdynpro for ABAP based on some input.
Regards,
Karthick S

Hi Karthick,
Use OVS help. It will take your inputs for search and give you corresponding search value list.
Refer my blog, it will be helpful.
[OVS Help in WDA|/people/shruti.rathour/blog/2008/05/05/ovs-help-in-web-dynpro-abap]
Thanks.

Hard coding f4 help values in select options

hi ,
i have requirement to hardcode certain values in the select-options in the selection-screen as F4 help . how to do it please help me out.

Hello,
Plz try this code below:
DATA:
      v_fname        TYPE fieldname,
      v_dynfield     TYPE dynfnam,
      v_fname01      TYPE fieldname,
      v_dynfield01   TYPE dynfnam.
CONSTANTS:
c_fname01    TYPE fieldname VALUE 'S_LOKKT-LOW',
c_fname02    TYPE fieldname VALUE 'S_LOKKT-HIGH',
c_dynfield01 TYPE dynfnam   VALUE 'S_LOKKT-LOW',
c_dynfield02 TYPE dynfnam   VALUE 'S_LOKKT-HIGH'.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_lokkt-low.
v_fname    = c_fname01.
v_dynfield = c_dynfield01.
PERFORM f_get_help
USING v_fname
             v_dynfield.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_lokkt-high.
v_fname01    = c_fname02.
v_dynfield01 = c_dynfield02.
PERFORM f_get_help
USING v_fname01
             v_dynfield01.
FORM f_get_help USING fp_v_fname    TYPE fieldname
                      fp_v_dynfield TYPE dynfnam.
TYPES:
BEGIN OF ty_f4_tab,
data type char2,
END OF ty_f4_tab.
DATA:
l_it_return TYPE STANDARD TABLE OF ddshretval,
l_wa_return TYPE ddshretval,
l_it_f4_tab TYPE STANDARD TABLE OF ty_f4_tab,
l_wa_f4_tab TYPE ty_f4_tab,
l_v_program TYPE sy-repid,
l_v_dynnr   TYPE sy-dynnr.
CONSTANTS: c_s    TYPE char1 VALUE 'S'.
* Populate the hardcoded values here
l_wa_f4_tab-data = 'AA'.
APPEND l_wa_f4_tab TO l_it_f4_tab.
l_wa_f4_tab-data = 'AB'.
APPEND l_wa_f4_tab TO l_it_f4_tab.
l_wa_f4_tab-data = 'AC'.
APPEND l_wa_f4_tab TO l_it_f4_tab.
l_wa_f4_tab-data = 'AD'.
APPEND l_wa_f4_tab TO l_it_f4_tab.
l_v_program = sy-repid.
l_v_dynnr   = sy-dynnr.
*Function module used to display F4 help in the selection-screen
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = fp_v_fname
      dynpprog        = l_v_program
      dynpnr          = l_v_dynnr
      dynprofield     = fp_v_dynfield
      value_org       = c_s
    TABLES
      value_tab       = l_it_f4_tab
      return_tab      = l_it_return
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc NE 0.
    CLEAR l_it_f4_tab.
ELSE.
    READ TABLE l_it_return INTO l_wa_return INDEX 1.
    IF sy-subrc = 0.
      fp_v_fname = l_wa_return-fieldval.
    ENDIF.
ENDIF.
ENDFORM.
Hope this is clear.
BR,
Suhas
Edited by: Suhas Saha on Dec 18, 2008 2:18 PM

How to get the values of Select-options from the screen.

The value of parameter can be obtained by function module 'DYNP_VALUES_READ' but How to get the values of Select-options from the screen? I want the F4 help values of select-options B depending on the values in Select-option A.So I want to read the Select-option A's value.

Hi,
Refer this following code..this will solve your problem...
"Following code reads value entered in s_po select options and willprovide search
"help for s_item depending upon s_po value.
REPORT TEST.
TABLES : ekpo.
DATA: BEGIN OF itab OCCURS 0,
ebelp LIKE ekpo-ebelp,
END OF itab.
SELECT-OPTIONS   s_po FOR ekpo-ebeln.
SELECT-OPTIONS s_item FOR ekpo-ebelp.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_item-low.
DATA:
dyn_field TYPE dynpread,
temp_fields TYPE TABLE OF dynpread,
zlv_dynpro TYPE syst-repid.
zlv_dynpro = syst-repid.
CALL FUNCTION 'DYNP_VALUES_READ'
    EXPORTING
      dyname     = zlv_dynpro
      dynumb     = syst-dynnr
      request    = 'A'
    TABLES
      dynpfields = temp_fields
    EXCEPTIONS
      OTHERS     = 0.
LOOP AT temp_fields INTO dyn_field.
    IF dyn_field-fieldname EQ 'S_PO-LOW'.
        SELECT * INTO CORRESPONDING fields OF TABLE itab FROM ekpo
        WHERE ebeln EQ dyn_field-fieldvalue.
        EXIT.
    ENDIF.
ENDLOOP.

Search help icon for select option

hello all...
can some one let me know , how to attach F4 help icon to select option..??
in select option im referrin to a data element, this data element has a domain which has value range.
if i press F4 on the select option, im gettin the values in the search help but the icon is not appearing..
any suggestions...
regards..
vishal

Hi,
Select TABLE-FIELD GOTO>Search help>For field.
If you have Search help you can assign here or else you need to create search help through SE11.
Or programatically you can code like below.
See below code........
selection-screen: begin of block B1 with frame title text-001.
select-options: s_pernr for zfdmr_records-pernr,
selection-screen end of block B1.
data: begin of t_itab occurs 0,
      pernr like zfdmr_records-pernr,
      end of t_itab.
DATA: t_return like ddshretval occurs 0 with header line.
*at selection-screen on value-request for s_pernr-low.
perform get_values changing s_pernr-low.
*at selection-screen on value-request for s_pernr-high.
perform get_values changing s_pernr-high.
*&      Form get_values
      text
     -->P_S_PERNR_LOW text
FORM get_values CHANGING    P_S_PERNR.
refresh t_itab.
clear t_return.
select pernr from zfdmr_records into table t_itab.
delete adjacent duplicates from t_itab.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
DDIC_STRUCTURE         = ' '
      RETFIELD               = 'PERNR'
PVALKEY                = ' '
     DYNPPROG               = sy-cprog
     DYNPNR                 = sy-dynnr
     DYNPROFIELD            = 'ZFDMR_RECORDS-PERNR'
STEPL                  = 0
WINDOW_TITLE           =
VALUE                  = ' '
     VALUE_ORG              = 'S'
     MULTIPLE_CHOICE        = ' '
     DISPLAY                = 'F'
CALLBACK_PROGRAM       = ' '
CALLBACK_FORM          = ' '
    TABLES
      VALUE_TAB              = t_itab
FIELD_TAB              =
     RETURN_TAB             = t_return
DYNPFLD_MAPPING        =
EXCEPTIONS
PARAMETER_ERROR        = 1
NO_VALUES_FOUND        = 2
OTHERS                 = 3
IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE t_return INDEX 1.
p_s_pernr = t_return-fieldval.
ENDFORM.                    " get_values
Thanks.
If this helps you award points and close the thread.
Message was edited by: Deepak333 k
Message was edited by: Deepak333 k

How to set a default value in Select one choice.

Hi
I'm using ADF BC, in that how to set a default value in select one choice.
pls. help on this.
regards

set the default value on the underlying EO or VO attribute
john

How to restrict the duplicate values in lov column of VO based Adv Table

Hi Gurus,
I want to restrict the duplicate values at lov which is a colunm in an Adv Table.
If user enters duplicate values then first it should show an error msg that Duplicate values have been entered.
After the duplicate values have been removed, then the user can save all the values in the table.
My Adv Table is based on a VO.
The link how to restrict the duplicate values at form level
talks about Adv Table based on a EoVO, which doesnot work in my case.
My Approach,
I am iterating through RowSetIterator and committing through PROCEDURE.
I am able to avoid duplicate entry through a function checkRespId. (given below)
Below code is for iterating and committing.
public void saveline(String reqid,String userid)
System.out.println("RequestId/saveline"+reqid);
System.out.println("UserId/saveline"+userid);
OAViewObject vo = (OAViewObject)getRespLineVO1();
RespLineVORowImpl row = null;
int fetchedRowCount = vo.getFetchedRowCount();
RowSetIterator deleteIter = vo.createRowSetIterator("deleteIter");
if (fetchedRowCount > 0)
deleteIter.setRangeStart(0);
deleteIter.setRangeSize(fetchedRowCount);
for (int i = 0; i < fetchedRowCount; i++)
System.out.println("Inside the for LOOP");
row = (RespLineVORowImpl)deleteIter.getRowAtRangeIndex(i);
String respoidid = row.getAttribute("ResponsibilityId")+"";
String respname = row.getAttribute("ResponsibilityName")+"";
String stdate = row.getAttribute("StartDate")+"";
String enddate = row.getAttribute("EndDate")+"";
String linestatus ="A";
if(userid!=null)
if(!(respoidid.equals("null")) && respoidid!=null)
String checkingrespid=null;
checkingrespid = checkRespId(userid,respoidid);+contains no if not duplicate and yes if its duplicate+
System.out.println("checkingrespid for Resp with ID :"+respoidid+"exists or not "+checkingrespid);
if(checkingrespid.equals("No"))
String message, result = null;
Connection txn = getOADBTransaction().getJdbcConnection();
try
calling PROC ...
catch(Exception e)
message = "Error in Inserting into line" + e;
throw new OAException(message, OAException.ERROR);
else
throw new OAException("You have entered duplicate no. of values", OAException.ERROR);
else
System.out.println("respoidid is null");
break;
deleteIter.closeRowSetIterator();
public String checkRespId(String userid,String respoidid)
String createRow="No";
OAViewObject vo = (OAViewObject)findViewObject("CheckRespVO1");
if (vo != null)
vo.setWhereClauseParams(null);
vo.setWhereClauseParam(0, userid);
vo.setWhereClauseParam(1, respoidid);
vo.executeQuery();
System.out.println("ROW COUNT IS "+vo.getRowCount());
if(vo.getRowCount()>0)
createRow="Yes";
else
createRow="No";
return createRow;
Problem:
I remove the duplicate entries and click on save and get this error.
Unable to perform transaction on the record. \nCause: The record contains stale data. The record has been modified by another user.
\nAction: Cancel the transaction and re-query the record to get the new data.
Thanks,
Sombit

Hi Anil,
I am trying out your code but stuck in inserting the rows
using your code in URL: http://oracleanil.blogspot.com/2010/09/oaf-passing-table-type-object-to-oracle.html
I am always getting the same exception i.e COde blast in when I run.
My modified code is:
String[] as = null;
Number[] vNumber = null;
Number[] vNumberrespid = null;
Number reqidnumber = null;
reqidnumber = new Number(Integer.parseInt(reqid));
Connection txn = getOADBTransaction().getJdbcConnection();
String mCreateSearchRequestStatement = null;
OAViewObject vo = (OAViewObject)findViewObject("RespLineVO1");
int j = vo.getFetchedRowCount();
try
System.out.println("abouce try");
vo.reset();
if (vo.getFetchedRowCount() > 0)
System.out.println(String.valueOf("Fetched row count ").concat(String.valueOf(vo.getFetchedRowCount())));
int i = 0;
as = new String[j];
vNumber = new Number[j];
vNumberrespid = new Number[j];
while (vo.hasNext())
vo.next();
System.out.println(String.valueOf("Inisde the do while loop").concat(String.valueOf(i)));
vNumber[i] = (reqidnumber);
vNumberrespid = ((Number)vo.getCurrentRow().getAttribute("ResponsibilityId"));
as[i] = String.valueOf(vo.getCurrentRow().getAttribute("ResponsibilityName")).concat(String.valueOf(""));
System.out.println("Request ID "+reqidnumber[i]);//getting null even there is some value selected
System.out.println("ResponsibilityId "+vNumberrespid[i]);//getting null even there is some value selected
System.out.println("Resp Name "+as[i] );//getting null even there is some value selected
i++;
CallableStatement cs = txn.prepareCall("{call XX_PassTableType.XX_PassTableType_prc(:1, :2,:3)}");
ARRAY array = new ARRAY(new ArrayDescriptor("APPS.JTF_NUMBER_TABLE", txn), txn, vNumber);
ARRAY arraynew = new ARRAY(new ArrayDescriptor("APPS.JTF_NUMBER_TABLE", txn), txn, vNumberrespid);
ARRAY array1 = new ARRAY(new ArrayDescriptor("APPS.JTF_VARCHAR2_TABLE_100", txn), txn, as);
cs.setArray(1, array);
cs.setArray(2, arraynew);
cs.setArray(3, array1);
cs.registerOutParameter(3, 2003, "JTF_VARCHAR2_TABLE_100");
cs.execute();
ARRAY error = null;
error = (ARRAY)cs.getArray(2);
if ((error != null) && (error.length() > 0))
System.out.println(String.valueOf("Error is ").concat(String.valueOf(error.getArray())));
String[] retError = new String[j];
retError = (String[])error.getArray();
System.out.println(String.valueOf("Error in saving data").concat(String.valueOf(retError[0])));
cs.close();
catch (Exception exception)
throw new OAException("code blast", OAException.ERROR);
Thanks,
Sombit

How to provide F4 help in a selection screen

Hi..
   How to provide F4 help in a selection screen for a particular field using
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'.
Thanks in Advance.
Regards
Raj Kumar

AT SELECTION SCREEN
at selection-screen on value-request for s_contr-low.
Get contract (low value)
perform get_contract changing s_contr-low.
form get_contract changing p_contr .
types: begin of ty_ycontract,
           ycontract type xchcontract-ycontract,
           lifnr     type xchcontract-lifnr,
           ycontdate type xchcontract-ycontdate,
           ycont_end_dt type xchcontract-ycont_end_dt ,
         end of ty_ycontract.
data: ds_returntab   type ddshretval,
        dt_returntab   type table of ddshretval,
        dl_fieldname     type dfies-fieldname.
data: dt_ycontract type table of ty_ycontract.
select ycontract lifnr ycontdate ycont_end_dt
    from xchcontract
    into table dt_ycontract.
if sy-subrc = 0.
    clear dl_fieldname.
    dl_fieldname = 'YCONTRACT'.
    call function 'F4IF_INT_TABLE_VALUE_REQUEST'
      exporting
        retfield        = dl_fieldname
        value_org       = 'S'
      tables
        value_tab       = dt_ycontract
        return_tab      = dt_returntab
      exceptions
        parameter_error = 1
        no_values_found = 2
        others          = 3.
    if sy-subrc = 0.
      clear ds_returntab.
      read table dt_returntab into ds_returntab index 1.
      if sy-subrc = 0.
        p_contr = ds_returntab-fieldval.
      endif.
    endif.
endif.
endform.

How to restrict the particular value in BEx?

HI,
I have added particular dimension in query prompt. While refreshing i got more value in particular dimension. How to restrict the the value in bobj or bex?
Here i attached the screen shot. Please find the attachment.

Hi Mani,
Please make sure of your requirement. If you are using only one single query for multiple reports then i strongly recommend the below criteria or else it better to restrict the value in the BEx itself if you have no other reports on the same BEx query.
If you are trying to restrict a report to a default prompt value then use equal to in query filter prompt or you can also restrict them to list of values i.e multiple values.Please follow as per the screens below. I am mentioning two ways.
Method:1
Step 1: Click on Prompt Options(Blue Questionmark Symbol)
Step: 2 : Click on the Values after you check the prompt properties options as shown below.
Step 3: Search for values if they are keys by checking the "Search in keys" or else not required.
Method 2: Here is another Easy way is Just give the input in the value box as shown below.
Let me know if you need any further help.
Regards,
Naveen

How to pass a default value in selection screen of logical database pnpce

Dear All,
Can any one tell me how to pass a default value in selection screen of logical database pnpce .
Regards
Rakesh Singh

Hi Rakesh,
Go to SE36 (logical database Builder).First enter PNPCE in Logical Database and press documentation,here you will get the details of exactly what is PNPCE and how it works.After that select selections in subojects in se36 only and enter display ,there you have the include from where you acn get the idea.
Regards,
Rahul

How to Captured Value into Select-Options Range Table Without "Enter"

Hi,
I defined a set of Select-Options in the Web Dynpro. I found that the value for the Select-Options will not be captured whenever I manually type in the value instead of choosing it from F4 Help Drop Down.
However, this problem can be resolved if I manually type in the value for Select-Options in the Selection Field and I press "Enter". Without pressing "Enter" value will not be captured.
Any solution for this issue? Please help.

Hi Kris,
My problem is only when the user key in the value themselves rather than choosing it from Select-Options drop down value. Most of the time user will know what value to key in and will skip the step to choose from the Drop Down List. Thus, if this happen, the value keyed in by the user will not be able to capture into the range table.
I am using this logic to capture the value for selection item:
wd_this->m_helper->get_selection_screen_items(
    IMPORTING et_selection_screen_items = lt_sel_item ).
* Values From Selection Screen
LOOP AT lt_sel_item ASSIGNING <fs_sel_item>.
    CASE <fs_sel_item>-m_id.
      WHEN `PERNR`.
        ASSIGN <fs_sel_item>-mt_range_table->* TO <fs_pernr>.
      WHEN `BUKRS`.
        ASSIGN <fs_sel_item>-mt_range_table->* TO <fs_bukrs>.
      WHEN `STAT2`.
        ASSIGN <fs_sel_item>-mt_range_table->* TO <fs_stat2>.
      WHEN `WERKS`.
        ASSIGN <fs_sel_item>-mt_range_table->* TO <fs_werks>.
      WHEN `BTRTL`.
        ASSIGN <fs_sel_item>-mt_range_table->* TO <fs_btrtl>.
      WHEN `PERSG`.
        ASSIGN <fs_sel_item>-mt_range_table->* TO <fs_persg>.
      WHEN `PERSK`.
        ASSIGN <fs_sel_item>-mt_range_table->* TO <fs_persk>.
      WHEN `ABKRS`.
        ASSIGN <fs_sel_item>-mt_range_table->* TO <fs_abkrs>.
      WHEN `BEGDA`.
        ASSIGN <fs_sel_item>-m_value->* TO <fs_begda>.
    ENDCASE.
ENDLOOP.
E.g. User key in the BUKRS without using the Drop Down Value provided by the Select-Options. For this case, <fs_bukrs> table will be initial as no value is captured.
Edited by: Girish Nabar on Apr 21, 2011 8:55 AM

How to assign list of default value for select-option variable???

Hi every one
This is Deepak,
I want to know how to assign list of default value to select-option variable ? please any body tel me solution
for example
select-option matnr for mara-matnr default ..............and here i want to give more than 1 values that will be default value and use can choose any one at the time of input .
Thank you in advance
Deepak

Hi.
Check the following sample code.
REPORT ztn_test.
" It is example for list populating.
TABLES:knvp.
data: BEGIN OF itab OCCURS 10,
kunnr like knvp-kunnr,
END OF itab.
data: wa_itab like itab.
TYPE-POOLS: vrm.
DATA: name TYPE vrm_id,
list TYPE vrm_values,
value LIKE LINE OF list.
PARAMETERS: s_kunnr(20) type c as LISTBOX VISIBLE LENGTH 40 .
AT SELECTION-SCREEN OUTPUT.
SELECT kunnr from knvp into CORRESPONDING FIELDS OF TABLE itab WHERE parvw = 'SP'. " SP for ur requirement
" I have used loop to populate some values from table
loop at itab into wa_itab.
name = 'S_KUNNR'.
value-key = sy-tabix.
value-text = wa_itab-kunnr.
append value to list.
clear wa_itab.
endloop.
" If u want individaully assign the values change the code as
name = 'S_KUNNR'." Select option name
value-key = 1." Index
value-text = 'VAL1'.
append value to list.
name = 'S_KUNNR'." Select option name
value-key = 2." Index
value-text = 'VAL2'.
append value to list.
CALL FUNCTION 'VRM_SET_VALUES'
EXPORTING id = name
values = list.
Edited by: tahir naqqash on Feb 21, 2009 4:38 PM

How to pass values to select options of custom transactions?

I have to call custom transaction-ZMM_POST from my custom report.
I have to pass values to select options(Not to parameters) of ZMM_POST from my report only.
Please tell me how to pass values to select options of custom transactions?

Have you tried this?
DATA: T_RSPARAMS TYPE STANDARD TABLE OF RSPARAMS WITH HEADER LINE.
T_RSPARAMS-SELNAME = "S_BUKRS".
T_RSPARAMS-KIND = "S".
T_RSPARAMS-SIGN = "I".
T_RSPARAMS-OPTION = "BT".
T_RSPARAMS-LOW = "100".
T_RSPARAMS-HIGH = "300"
APPEND T_RSPARAMS.
SUBMIT Z_DUMMY WITH SELECTION-TABLE T_RSPARAMS.
Greetings,
Blag.

How to set default value in select option for ABAP query

Hi experts,
What is the way to set up default values for select-options in ABAP query.
e.g.
I have one field 'Year' in my ABAP query selection screen.
I want value of current year to be appeared here whenever user execute report
Thanks in Advance
-Harkamal

Hi Harkamal,
execute your Query via SQ01. On Selection-Screen
goto save Variant. Mark your field
as selection variable an press Button election variable.
Take variable from TVARV and use it.
Than save the Variant.
Look at TVARV if the 'Year' is updated to the actualYear!
regards, Dieter

Getting values from select option

Hi,
I have a requirement where the user is going to pass values in select-option in low and high. lets say s_bwart(movement types).
now i have to fetch this bwart values into an internal table.
my internal table will be having only one field that is bwart. so how do i populate my internal table with those values. could any body help me in this.
Thanks in advance
neha

Hi, when using SELECT-OPTIONS, use can pretty much do any kind of selection he wants, including ranges, and excluding values, so the best way to handle it is to select from the data base when the user executes the report. for example.
data: begin of ibwart occurs 0,
      bwart type mseg-bwart,
      end of ibwart.
select-options: s_Bwart for mseg-bwart.
start-of-selection.
select bwart into table ibwart
           from <b>T156</b>
                 where bwart in s_bwart.
Regards,
Rich Heilman

How to restrict f4 help values in select options of Employee Search

Similar Messages

Maybe you are looking for