How to route the L and R signal of a stereo track to different auxes.

Hi there,
I'm wondering if there is an easy way to route the L and R signal of a stereo track to different busses independently?
I used a workaround with split-stereo files but there must be another way of routing the signals.
Any idea?
Thanks Eddie

http://discussions.apple.com/message.jspa?messageID=6430392#6430392

Similar Messages

HT1338 how to route the mails directly to the folders in MS Office

I need to know how to route the messages to folders from In Box once they arrived in MS Office. I tried by applying rules but its not working.

Hi,
we can check the multiline present in receiver determination and specify the condition for both US an UK receiver systems.
Or if you are sure that only two (UK and US) will come , then check the condition for Say UK and check the defualt reciver system in case of failure ,if its US it will go to the default system.
You can also try out the interface determination condition, please check if below links can help.
How to write Conditions in Interface Determination for 2 IDOCs
Single File to multiple IDoc
Reciever idoc adapter Determination error
Regards,
Srini

How to route the file, base on the file name without touching file content?

Hi All,
can you please provide me solution how to route the file based on file name with out touching file content.
Business criteria :
> One source directory having zip files with different file names
> File adapter have to pick the zip files and have to route it to different email addresses based on fist 5 characters of file name.
please provide possible solutions to route the zip files to target.
Regards,
Sreeramulu Konjeti.

You can use Standard context object FILENAME.
in receiver determination Put a condition based on standard context object FileNAME
In the receiver determination, in the condition channel, use the Technical context object 'FileName' for file adapter.
Follow the below path:
Goto Receiver Detrmination --> Condition --> Left Operand f1 Help --> select first option 'Context Object' --> 1 List will be popped up --> Select FileName for File adapter from that list
It will route the file based on filename.
You can use CP for contains pattern (u2248) in condition
FileNAME u2248 ABCFI*

How to sync the album and track info that I entered into a CD using iTunes with the actual disc?

Hello,
I recently recorded some cover songs, and I imported them into iTunes. So, after entering the track info (track names and album art) into each track using "Get Info", I burned them to a CD. I was completely shocked that the track info and album artwork did not get inputted onto the CD. So, I entered the track info, but could not add the album artwork.
How to add the album artwork is not as important a question. But it's one of my 2.75 questions.
My other issue is that the info that I put on the CD using iTunes is only visible within iTunes. Therefore, I cannot get the track names elsewhere.
My 2.5 questions are:
1) How do I get the track and album info to display in Windows Explorer and Windows Media Player (and the touchscreen CD Player in the car)?
2) How do I add digital album artwork to the CD (so that it shows on the touchscreen CD Player in the car - if iPods have the artwork and it shows on the car's screen, a CD should be able to show the artwork on the car's screen, when talking about limitations of the car)
2.5) How do I make that artwork display across everywhere I plug that disc into?
2.75) How do I ensure that when others import my CD, my artwork, track names, and album name also import from the CD?
I have already burnt the CD, so I would prefer a way to tweak the properties of the already burnt CD rather than burning a whole new disc.
Thank you!
-Royce

1) Metadata visibility in Windows Explorer and/or Windows Media Player depends on OS version and file type. The mp3 format has the widest support. As for the touchscreen CD Player in your car who can say? If it can play data discs the results will be better than with audio CD. If it can display CD text then this option should be selected when creating an audio CD.
2) Artwork cannot be attached to the tracks on an audio CD. If your car system supports it all then it will be with data discs. Check the specifications of the system for the media types it can support on a data disc.
2.5) Simply ensure the artwork is embedded in the tag.
I have two scripts that can help with this, CreateFolderArt and EmbedFolderArt.
The scripts have a slightly different purpose.
CreateFolderArt ensures that every album folder ends up with a Folder.jpg image which is the art that iTunes already knows about. Side effects are that if artwork has been updated in iTunes the folder art should be updated also, and if any track from the album doesn't have embedded artwork it gets embedded.
EmbedFolderArt was actually written for someone who already had various artwork images stored in the folders and wanted them added to their tracks, but not if iTunes had already downloaded a better quality image.
2.75) Again, use a data disc format. Note that you should not be giving away copies of copyrighted material.
Audio CDs are finalized, you cannot change any properties of them unless they are on rewritable media in which case you can erase the whole disc and start over.
tt2

How to know the balance and validity of internet data in iPad

How to know the balance and validity of internet data in iPad?

Sir I m using internet in ipad4 with airtel network
They provide me 2gb data with the amount of 255 rupees
And now I inserted the sim in my ipad4
And start the surfing on safari n all
And now I wanted to know how much data is balance.

How to change the name and description of a wim using DISM

With Imagex we could update the name and description of the wim with on easy command:
imagex /info img_file [img_number or
img_name] [new_name] [new_desc]
e.g.
imagex /info Win7Combined.WIM 1 "Win7(x86)" "Windows 7 x86"
Since the ImageX tool is deprecated in Windows 8 and has been replaced with DISM, can someone explain how to update the name and description with one easy command using DISM like we could with Imagex?

It looks like this person had the same issue. Have you seen this
link
It talks about exporting an Index into a new WIM. Which, in a way, would be renaming it. It's really recreating it and you have to give it a name. But it seems to work.
Dustin Estes - MCP | www.dustinestes.com

My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to display the data?

My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to disable the data held on it and ensure that if it is fixed, nobody can use/see my data and access my account?

Hi Gazpan,
Thanks for visiting Apple Support Communities.
I recommend using the steps in this article to back up your iPhone if possible:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
You may also find this advice helpful for your situation:
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5661
If you no longer have your iOS device
If you're using iCloud and Find My iPhone on the device, you can erase the device remotely and remove it from your account by signing in to icloud.com/find, selecting the device, and clicking Erase. When the device has been erased, click Remove from Account.
If you're unable to complete either of the above steps, you should change your Apple ID password. Changing your password won't remove any personal information that is cached on the device, but it will make sure that the new owner can't delete your information from iCloud.
Cheers,
Jeremy

How to change the day and time seen on the calendar

Hi.
I am a bit confused as to how to restrict the day and time shown on a calendar.
The ical help says this:
To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
However, in my preferences pane, i don't have a either a week or day pop up menu that i can see, so i can't seem to restrict these fields. It's really frustrating as calendars are beginning at 1am!!!!
Anybody got any ideas?
Thanks
David Tobin

OK, but what did the help menu mean when it said..
To view the day's, week's, or month's events, click the Day, Week, or Month button at the bottom of the iCal window.
To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
To change which months are shown in the mini-month calendar (in the lower-left corner of the iCal window), click the arrows above the mini-month calendar. To see more than one month, drag the mini-month divider (the horizontal gray bar above the diamond) upward.
To see events that are earlier or later in the day, use the scroll bar on the right side of the main calendar view.
To change the range of time in the main calendar view that is not shaded (representing your "normal" day), choose iCal > Preferences. In the General pane, choose the times you want to appear in white (not shaded) from the "Day starts at" and "Day ends at" pop-up menus. All times outside that range are shaded.
This suggests that you should be able to limit the hours actually shown on the calendar to a set range as opposed to just changing the shaded area.
Have you any idea how to achieve this, as i don't see the popup menu suggested with...
To change the days of the week or the number of hours that appear in the main calendar view, choose iCal > Preferences, and make your choices from the Week and Day pop-up menus in the General pane. For example, you can choose to only see the hours from 9AM to 5PM on Monday through Friday.
I am confused!!
Any other ideas?
David Tobin

How to print the Terms and Condition page ine the sap-script

Hi experts,
                         i got the requirement that how to print the Terms and condition page in the script,i have the three pages, having the same main window, in the last of the main window(all three pages) i have called the hard coded text(i.e so10 text), but when i am displaying the output data get printed in the first page but i am getting the second page heading on the top of the terms and condiions page. In all the three pages i have the same main window, if i make change in any window i will affect all the other main windows. so please suggest me how i need to go.HOW TO GET GRID OF THE TEXT ON THE TOP OF THE SECOND PAGE OF THE TERMS AND CONDITONS.
like this i have called in the MAIN WINDOW
/E : LAST ( IN ALL THREE PAGES)
       INCLUDE ZSD_INVOICE_TERMS TEXT OBJECT TEXT LANGUAGE EN.
IN THE TCODE SO10
NEW PAGE TERMS.
1) TERM MS AND CONDITONS TEXT.................................................
FIRST->NEXT, NEXT->NEXT,,   TERMS--->TERMS.

Hi,
1. Create a new page by Name : LAST
2. Identify the text element which will be the last element in the form in the debug mode.
Mostly Ex: SUM, TOTAL, LAST etc.,
3. the page linking should be
First --> Next
Next --> Next
4. In the Text element identified in the step 3.
Write the following code
/: NEW PAGE LAST
/: INCLUDE the standard text created for the terms and conditions in SO10
Check the syntax for the command but the logic will be the same.
It should resolve your problem.

How to club the downpayment and periodic billing scenario in Sales Order

Hi experts,
Could you please let me know how to club the downpayment and periodic billing scenario in Sales Order.
Requirement is : If you have 10 lacs total amount and out of that 50% should be the downpayment and rest of the amount should be distributed among three equated instalments for 2 months each (periodic billing). This should work with one line item in sales order. Pls provide relevant inputs how to work out this scenario.
Your help would be appreciable.
regards....Diwakaran

Hi Yang,
Workflow is the best approach for any issue related to business objects.
Since you want call FM BAPI_SALESORDER_CHANGE, it will change SO. It means everytime any SO is changed there will an event being triggered.
object type: BUS2032
event: Changed
simple solution:
1. Please create object type (SWO1) and its super type should be BUS2032.
2. Add your own method and attach your custom FM which actually updates the qty & PR)
3. Create Task (PFTC_INS)
in basic data:
- provide object type which you have created
- provide method which you have added
goto triggering events tab
- Choose Object Category as BOR object type
- provide object type (better give BUS2032)
- provide event as CHANGED
Please have look into very nice video blog which helps you to create your workflow.
blog: [Creating your first SAP Business Workflow]
Regards,
Sukhbold Altanbat.

How to change the font and colour of the PL/SQL Editor in forms

Hi All,
I am fed of viewing the small fonts in the PL/SQL Editor. I am feeling stress
in my eyes daily...Please any body help me how to change the color and font
of the PL./SQL editor in oracle forms 6i..Thanks in Advance...

Hi
Thanks for the reply..
But I personally feel that Oracle people should have done this since
any editor should allow us to change the font and colour...any way lets
hope that in the future releases that may happen...
Raghu

How to run the report and show the output in excel file

salam
how to run the report and show the output in excel file,
how to run the report and print the o/p via printer
how to run the report and send the o/p via mail
thank u all

Hi,
There are Parameters DESTTYPE, DESFORMAT and DESNAME. You can set these parameters to get as you want.
1) Output in Excel File
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'FILE');
     ADD_PARAMETER(PL_ID, 'DESFORMAT', TEXT_PARAMETER, 'DELIMITED');
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<file_name>.XLS');2) output to printer
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'PRINTER');
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<printer_name>');3) Email - Have to configure SMTP and all. ( i didn't checked it)
     ADD_PARAMETER(PL_ID, 'DESTYPE', TEXT_PARAMETER, 'MAIL');
     ADD_PARAMETER(PL_ID, 'DESNAME', TEXT_PARAMETER, '<email_id>');Regards,
Manu.
If this answer is helpful or correct, please mark it. Thanks.

I am working in Numbers and can't seem to change the generic value assigned to the legend. Any advice on how to select the legend and save new values?

I am working in Numbers and can't seem to change the generic value assigned to the legend. Any advice on how to select the legend and save new values?

Ntenich,
If your table has a Header and your Legend text is in the header, it will be picked up by the table.
Jerry

How to edit the find-and-replace dialog in Dreamweaver 8

For over 13 years I have been a happy user of Macromedia Dreamweaver 8. And I still see no reason to use any other program for editting PHP.
However, 1 thing has been bugging me for years. In the find-and-replace dialog there is a select "Find in". The options are in a dropdown.
I want this select to be a multiselector (not in functionality, but just so I don't need to click to get the dropdown, but just one click to select).
I read in the help at 'Customizing the appearance of dialog boxes' at point 4
On your disk, find the appropriate HTM file in the Configuration/Objects, Configuration/ Commands, or Configuration/Behaviors folder.
I've been searching but can not find the code for that dialog, althou it should be easy. Also did a search for that 'save' image, because once I find that, I can find this form, but its not in the macromedia folder.
how to edit the find-and-replace dialog in Dreamweaver 8?

It's looks less like an image and more like a form drop list to me.
Yes its a dropdown list. But to find the code for that select I tried to find the htm file that code is on by searching for the save-image which is also on that page (next to the yellow folder). I did a search on all folders in c:/programfiles/macromedia and that image is not in there. If I could find the image name, I could search the code for that and should find that htm (or javascript) which is outputting it, then the select must be near to that.
I also searched the code for the various texts on the page and got many hits, but not from the dialog page. I can't search dll files, so maybe thats where that code is in.

How to make the dblink and what is the use of this

plz any body tell me "how to make the dblink and what is the use of this"
sujit

Do you understand how to make the Slider work using code to read its value? You will need to look into that in order to do this.
What you can do is have the yello rectangle be a movieclip that sits over the red rectangle and use the Slider to control the yellow rectangle's alpha property from 0 to 1. That way the yellow will gradually fade as you slide.
What you will then need to do is figure out how to make the number of dots that appear reduce from 15 to 8 over the same range of the slider. You need to use the fractional value from the slider to decide how many dots either appear or do not appear.
You should not start new postings for the same topics that you arlready have postings for. Doing so in the future might result in them being removed.

How to route the L and R signal of a stereo track to different auxes.

Similar Messages

Maybe you are looking for