How to run a midlet on a real device and other questions!!VERY VERY URGENT

PLEASE I NEED HELP FOR ALL THESE DETAILS
AS SOON AS POSSIBLE
hi
i would like to know the following details regarding
J2ME:
1. What is the size of a KVM(Kilobyte Virtual Machine)?
2. What would be approximately the memory size
of a mobile phone?
3. How do i transfer my midlet application developed
with the help of a J2ME tool kit to a mobile device?
4. Should the device to which i am transferring
be MIDP compliant alone i.e as of now
i can transfer my midlet application only
to an MIDP compliant mobile device?Or rather
what are the in-built features/softwares/specification
a mobile device should have before i transfer
a midlet to a mobile device??
5.Suppose i have written midlets...and put them
in .jad and .jar files(midlet suite has been created).
Now suppose i have to download it to my
mobile phone,how do i do it?
And if other people have to download it to
thier mobile device...i need to put it on the web-site
right?How do actually put my midlet to a web-site?
Are there any steps involved for all that?
6.Will the mobile device have ENOUGH MEMORY
for executing the midlet which i have created
considering the memory constraints of a mobile
device.Also the fact that the KVM also
would take up a lot of space though it is measured
in kilobytes
thanx in advance

2. What would be approximately the memory size
of a mobile phone?
This depends on the phone vendors.But the min size should me 128kb.Normally it should be 128 to 512 kb.
3. How do i transfer my midlet application developed
with the help of a J2ME tool kit to a mobile device?
There no provision to do this with j2mewtk.
Once angin this depends on the phone vendors.If the phone supports to download from a site then you can directly download it from that site or you have to connect to pc(you have to install the Java Application Manger) and then you can do it by using a serial cable.
4. Should the device to which i am transferring
be MIDP compliant alone i.e as of now
i can transfer my midlet application only
to an MIDP compliant mobile device?Or rather
what are the in-built features/softwares/specification
a mobile device should have before i transfer
a midlet to a mobile device??
The device must be j2me enable.ie midp/cldc compatble.Then you can download the application on to the device.
5.Suppose i have written midlets...and put them
in .jad and .jar files(midlet suite has been created).
Now suppose i have to download it to my
mobile phone,how do i do it?
And if other people have to download it to
thier mobile device...i need to put it on the web-site
right?How do actually put my midlet to a web-site?
Are there any steps involved for all that?
How to download i already explained in q3.
If you place the .jad and .jar in www.j2me.com/app/
then In your jad you must give the url of the midlet.
Then any one can download your application.
6.Will the mobile device have ENOUGH MEMORY
for executing the midlet which i have created
considering the memory constraints of a mobile
device.Also the fact that the KVM also
would take up a lot of space though it is measured
in kilobytes
Once again This also depends on the phone vendors only.For motorola i85 they support 50kb, NTTDoCoMo phones they support only 10kb size of your application.
All The Best
Gone anything worng plz let me know
koka

Similar Messages

VERY URGENT!!transferring a midlet to a mobile device and other questions

PLEASE HELP!!
hi
i would like to know the following details regarding
J2ME:
1. What is the size of a KVM(Kilobyte Virtual Machine)?
2. What would be approximately the memory size
of a mobile phone?
3. How do i transfer my midlet application developed
with the help of a J2ME tool kit to a mobile device?
4. Should the device to which i am transferring
be MIDP compliant alone i.e as of now
i can transfer my midlet application only
to an MIDP compliant mobile device?Or rather
what are the in-built features/softwares/specification
a mobile device should have before i transfer
a midlet to a mobile device??
5.Suppose i have written midlets...and put them
in .jad and .jar files(midlet suite has been created).
Now suppose i have to download it to my
mobile phone,how do i do it?
And if other people have to download it to
thier mobile device...i need to put it on the web-site
right?How do actually put my midlet to a web-site?
Are there any steps involved for all that?
6.Will the mobile device have ENOUGH MEMORY
for executing the midlet which i have created
considering the memory constraints of a mobile
device.Also the fact that the KVM also
would take up a lot of space though it is measured
in kilobytes

1 and 2 i do not know right now.
You can transfer MIDlets to J2ME compatible devices only ,atleast for now. To do this , you must use a serial cable and download it directly to your cell phone or pager.
The CLDC has been designed to suit applications that run low on memory ( from 160 kb to 512 kb)
good luck

How can I make the playback buttons of YouTube and other plug-ins bigger since they are so tiny?

How can I make the playback buttons of YouTube and other plug-ins bigger since they are so tiny in Firefox? I tried some suggestions that dealt with entering "about:config" in a fresh browser, but to no avail. I also downloaded an add-on called "Theme Font & Size Changer", but that didn't work either. So, I am reaching out here as that was a suggestion that another user here offered.

Ah, yes- that is an ultra high DPI (dots per inch) display. This is a known issue in Flash Player, which Adobe is working on fixing.
In the mean time, you can get some videos to have normal-sized controls by switching Youtube to the HTML5 video player:
In Firefox, go to https://www.youtube.com/html5 and click the "Request the HTML5 player" button.

How I can download mavericks OS from windows device and install it in my macbook air?

from my mistake I formated my device (macbook air 2013) when i am trying to install windows by using boot camp
and now i cant boot my device becuse it doesnt have OS
how I can download mavericks OS from windows device and install it in my mac?

hmmmm no need for windows device. simply hold down Command and R at start up it will install recovery HD and then u can install OS, for that u need a stable and good speed internet. so fist connect your Mac with internet and then start it by holding cmd and r after that it will do all the work.

How to Run a Request Set on specific days and at specific hours

Hi community,
The question is simple, how to rin a Request Set on Specific Days and at Specific hours?
Let me explain the scenario.
E-Business Suite, Release 11.5.9.
We have a request set under Sysadmin user. This Request set is running 24x7, during all year, and we want to restrict the execution from Monday to Friday since 08:00 a.m. to 20:00 p.m. in order to increase the productivity of our system and more over, to avoid the size increase of a table (OE_EXPOSURE_INTERFACE)
The Request Set includes 5 Requests:
10. Workflow Background Process.
20. GUZMAN: Cálculo metodo pago en pedidos.
30. GUZMAN: Exposición de crédito externo.
40. Credit Exposure Import.
50 Initialize Credit Summaries Table.
As you can see three of them are standar Oracle Order Management Processes and two of them are custom Oracle Order Management Processes; and the requests must be executed in that order.
We have just thinking about to create a Custom Manager with a workshift from Monday to Friday since 08:00 a.m. to 20:00 p.m., and include the requests as specialization rules or assigning those request to a Request Type and then include that Request Type as specializated rule, but this does not assure us that the request will be executed in that order.
Any suggestion?
Thanks a lot for your answer in advice.
Luis.

Hi Anchorage,
It could be a solution, but not the exact solution that we want. Let me say why.
With the Request set we have the security that each concurrent request is executed when the prior one finishes; is that to say 20, does not begin till 10 finishes, and 30 does not begin till 20 finishes and so on. The most critical concurrent requests are 40 and 50, cause those are the ones that import an external credit exposure in the OE_EXPORURE_INTERFACE table (40) and are the ones that delete those external credit exposures imported (50). The problem is (and we do not know why) that these actions makes grow the size of the table and each time the 40 and 50 processes takes more minutes to finish. That's why we need to truncate the table in order to avoid the excesive grow of itself.
Making each process independent, with a begining time and hoping and expecting that the following one does not begin till the prior one ends is not an admisible or realizable solution due to the problem with the 40 and 50 processes.
So at the end, we need a request set in order to know that each one began when the prior one ends.
And Due to in order to truncate the table, as I said before, the processes that have a relationship whit it, must be stopped (just the 40 and 50 processes) prior to the truncation.
So as you see, it is difficult, very difficult.
Regards.

How to run zonecfg command-line to add device in postinstall script?

I want to assign a tape drive in non-global zone in postinstall script. I can run zonecfg with a command-file, but don't know how to run zonecfg to add device in a whole command-line.
The command-line fails to run:
# zonecfg -z sun1 add device set match=/dev/rmt/173b
syntax error at 'set'
Commands:
add <resource-type>
(global scope)
add <property-name> <property-value>
(resource scope)
cancel
commit
create [-F] [ -b | -t <template> ]
delete [-F]
end
exit [-F]
export [-f output-file]
help [commands] [syntax] [usage] [<command-name>]
info [<resource-type> [property-name=property-value]*]
remove <resource-type> { <property-name>=<property-value> }
(global scope)
remove <property-name>=<property-value>
(resource scope)
revert [-F]
select <resource-type> { <property-name>=<property-value> }
set <property-name>=<property-value>
verify
Thanks for your help!

Quote the parameters and embed the newlines:
zonecfg -z sun1 'add device
set match=/dev/rmt/0
end'

How to run Net Configuration Assistant on 10g Forms and Reports server

I have a Windows 2000 server with Forms and Reports Services installed from AS 10g v. 9.0.4 (just the Forms and Reports install). According to the OUI, Net Configuration Assistant 9.0.4 is also installed. However I cannot figure out how to run the Net CA. There is no shorcut that I can find. Can anyone help?

Thanks for the reply Frank. I have looked all through the Start menu but see no "Configuration and Migration". I assume it's because I only installed the Forms and Reports option, so I only have Forms Services, Reports Services, and the Universal Installer. No big deal - I've already setup tnsnames manually. I just like to use the Net Assistant when I can.

How to run process chain in day of 20 and 2 every month?

Dear all,
I have to run process chain in day of 20 and 2 every month,but the settting of PC just allow Scheduled start every month once
time.
Please tell me the way of setting process chain.
Thanks.

Hi,
(1) Create an event in the BW system
Define a system event (for example SAP_BW_TRIGGER) with Transaction SM62. Lets says it is "EVENTX". Use this even in the Process chain and execute the process chain as repeative job.
(2) Use the below lines of code in the program for calling a Fucntion which trigeres the event created above . Here in this program you will call the the Below FM if and only id the sy-datum is 20 th or 2nd of the month ( as mentioned by our friend suggested).
call function 'BP_EVENT_RAISE'
exporting
eventid = EVENTX
exceptions
bad_eventid = 1
eventid_does_not_exist = 2
eventid_missing = 3
raise_failed = 4
others = 5.
endfunction.
Regards,
Anil Kumar Sharma .P

How do I get rid of 97] in Cookies and other website data

When I open Preferences/Privacy and select "Details" under "Cookies and other website data" the first entry which pops up is
97] plug-ins
If I highlight this entry and click remove, It is removed for perhaps 10 seconds, and then re-appears in the list.
1- What is this?
2- How do I get rid of it?
This is clearly a prvacy issue, or Apple would not be listing it in this listing with the associated warning.

Linc Davis wrote:
Log out, then log back in while holding down the shift key after you enter your login password. Keep holding until the desktop appears. That will prevent third-party add-ons from loading. Try again to delete that item.
If you still can't delete it, and you still want to, proceed as follows.
Back up all data if you haven’t already done so. Before proceeding, you must be sure you can restore your system to the state it’s in now. If you skip this step, no one but you will be responsible for the consequences.
Quit Safari if it’s running.
Step 1
Select /Applications/Safari in the Finder and open the Info window. There’s a checkbox in that window labeled “Open in 32-bit mode.” If that box is checked, uncheck it. Close the window.
Hold down the option key and select Go > Library from the Finder menu bar (Lion) or open the Library subfolder of your home folder (pre-Lion). Delete the following items from the Library folder (some may not exist):
Caches/com.apple.Safari
Caches/Metadata/Safari
Saved Application State/com.apple.Safari.savedState
Leave the Finder window open. Try Safari again.
Step 2
If it still doesn’t work right, quit, go back to the Finder, and move the following file to the Desktop:
Safari/Bookmarks.plist
Then delete the following items (some may not exist):
Cookies/Cookies.binarycookies
Cookies/Cookies.plist
Preferences/com.apple.Safari.LSSharedFileList.plist
Preferences/com.apple.Safari.plist
Preferences/com.apple.Safari.RSS.plist
PubSub/Database
Safari
Try again. This time Safari should perform normally, but your settings will be lost. Select File > Import Bookmarks from the Safari menu bar. Import from the bookmarks file you moved to the Desktop. Recreate the rest of your Safari settings. You can then delete the old bookmarks file.
Note: This step will remove your Safari Extensions, if any, and their settings. If you choose to restore them, do so one at a time, testing after each to make sure you haven’t restored the problem.
If you don’t like the results of step 2, you can undo it completely by quitting Safari and restoring the items you deleted in that step from your backup, overwriting any that were created in their place. You don’t need to restore the files you deleted in step 1.
Ok... completed step1 with no change.
went on to "part of "step 2...
I kept the Bookmarks.plist, but then deleted the assortment of safari related Caches and Cookies
Cookies/Cookies.binarycookies
Cookies/Cookies.plist
(I found several entries in Cache, but forgot to write down which ones I deleted ... sorry.)
did not delete any of the preferences or the last two entries in your list above.
Tried again and "the perp" was still there. "Remove all" on the Details tab did not change things...
However, there were now only 2 entries -- the 97] AND my bank's entry (Chase)!
Going back to the main privacy tab and clicking "Remove all Website Data" this time DID remove the last two entries.
=====
Now when I open the details tab, (I run my own webserver as my home page) Safari showed ONLY the cache entry for my server, no cookies.
However, I then noticed something quite intersting.
I left the details tab open and pulled to the side (the joy of having a 27 inch iMac) and naviaged to Apple.com
and then to support and then logged in to here.
As I was doing this. the Details window first showed, "Apple.com" .. Cache, Cookies, Local Storage
but then virtually immediately poped up entries:
doubleclick.net ... Cache
edgekey.net ... Cache
google.com ... Cookies
Very interesting, both from the point of view that "details" was showing me what was happening in "real time."
And the fact that, even with zero external ads, the web site, Apple.com, was inserting entries in the cache for doubleclick.net and edgekey.net. I can "almost" understand the "google.com" cookie, ecept for the fact that the search engine selected in the tool bar is "bing."... as I said "interesting."
With this new "insight" on the Details screen, It may be possible to determine WHERE this 97] actually came from. However, I would still like an explanation of what it actually is.... since the "]" (right square bracket) character is evidently a "special character" for search engines -- google, Yaho and Bing all treat it the same way -- they ignor it.... even when the entire 3 character string is quoted -- "97]" -- the pages returned all are for entries with only 97 in them.

I'm a school tech coordinator. Many computers and many iPads. How many Apple IDs can I have per device, and how many devices can have the same Apple ID? To make my life easier, I'd like 200 devices to all use the same Apple ID.

I'm a school tech coordinator. I have many computers and many iPads. I apologize if there is a some place that has all the rules governing the use of Apple IDs. I looked, and I even tried to get the answers from multiple Apple rep's. I couldn't find the answers.
How many Apple IDs can I have per device?
I want to use the same computer to sync and backup many iOS devices. The iOS devices would be associated with different Apple IDs.
I may load apps under a school Apple ID and have users load their own apps under thier own ID.
How many devices can have the same Apple ID?
Can I use the same Apple ID on all the computers in a lab?
Can I use the same Apple ID on all iPads for a particular grade level?
Are the rules different for iOS devices and computers?
I know that there are limits on "authorize" and "de-authorize" and how frequently those things can be done.
Recently I heard that for the life of an iOS device, it can only be associated with five Apple IDs. That is not good for a school giving iPads to students in a 1:1
To make my life easier, I'd like 200 devices to all use the same Apple ID.

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html
It would be best to address your questions there, especially since this is a public forum, and over there you could post more private issues with this set-up. Not to mention, getting more official answers.

How to read the BDB log ... and other questions

I am using a bdb database interface in the application openldap. When the bdb database there is established it creates, in addition to the data storage diles, a log file (log.0000000001). "file log.0000000001" reports that to be a binary file. How does one read that log?
I have asked this question on the openldap forum and was advised it can be read using tools provided by Oracle to support Berkeley DB, and was furhter advised to go the the Oracle Berkeley DB site. Well, I have done that ... looked around for evidence of any such "tools", but have found nothing.
Also, was advised there (in the openldap forum) that having that log file in the same directory with the data files is not a good idea, that it should be on a different spindle for performance purposes. I have looked at the BDB reference manual on line here but find no configuration options to move that log file to a different location.
Help? Thanks.

Hi Robert,
The information about setting log directories can be found here:
http://www.oracle.com/technology/documentation/berkeley-db/db/api_c/env_set_lg_dir.html
General information about log files that you may want to read about:
http://www.oracle.com/technology/documentation/berkeley-db/db/gsg_txn/C/index.html
You can use db_printlog to display the log files:
http://www.oracle.com/technology/documentation/berkeley-db/db/utility/db_printlog.html
The above link will also point you to a place to review the output. The db_printlog utility should be installed as part of your distribution.
Ron

How can I access BBC iPlayer, Itv Player, 4OD and other television on demand services in he UK on my new AppleTV?

How can I access BBC i player, ITV player, 4OD and other on demand catch-up services in the UK using my new Apple TV?

You can't directly, you can watch them via AirPlay from your iOS device or Mac Computer though.
If you have any suggestions that you think might enhance the Apple TV you can send Apple your feedback here

How to create a text area with spell check and other functions similar to word?

I want to allow users the ability to copy and paste their content on to the site. The problem is giving them the option to use spell check and other word like features to my site. My goal is to develop some thing similar to how we post our question in this forums.

Some old and some new.
http://www.webdesignbooth.com/15-really-useful-web-based-html-editors/
You realize you'll need to use server-side scripts and a database for this. Instead of re-inventing the wheel, you might just want to install WordPress, Drupal or Joomla on your site.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

How To: Use FCPX to create iPhone Portrait Movies (and other non-standard formats)

Goal: Use Final Cut Pro X 10.0.7 to produce a 640x1136 video (iPhone 5 Portrait). You can use these same steps to produce virtually any dimensions you want. My example is for the iPhone 5, in Portrait mode.
This information is available in various places, but you have to realy work to find it, so I thought I'd post a step-by-step guide here.
By the way, you might think you could just create a FCPX Project with your desired dimensions, but you can't (at least with 10.0.7). Projects only support certainly dimensions. But there are other ways, as the rest of this post describes:
1) Create an initial movie with the desired dimensions, to serve as a template. We'll call it "Template.mov". The only thing that matters is the dimensions. It can be in any codec FCPX understands, and virtually any length.
I'm using a 2 second video shot on my iPhone for the template. You could also create a blank image (.png, whatever) with the proper dimensions, copy and paste it into a new Quick Time Pro 7 window, and Export it using custom settings. There's lots of different ways to do this.
2) Drop Template.mov into a FCPX event.
3) Select Template.mov in the Event browser, and select File->Duplicate (or command-D). You probably could just edit "Template.mov", but it's a good idea to save it for reuse.
3) Change the name of the copied video. I'm using "iPhone Video".
4) Right-click "iPhone Video" and select "Open in Timeline".
5) If you made the Template video from a still image, you may need to change the duration (ctrl+D). You don't have to make it very long, but it needs to be longer than 1 frame. A few seconds should be enough.
6) Use this timeline like you'd use a project's timeline. Drop in new content, trim, transition, etc. There may be things you can't do in it, but I haven't found any yet. I'm guessing Chapters may not work, but I haven't tried them.
7) Note that when you drop new content into the timeline, it may size funny. That's because the default setting for "Spacial Conform" is "Fit". Simply select the newly-dropped content, and in the Video settings inspector, scroll down to "Spacial Conform" and change it. You could use "Fill", which fills the frame vertically, or "None", which uses the source's original height. Then crop/transform/whatever to get what you want.
8) When you're ready to render, select "iPhone Video" in the Event browser, then use the "Share" button. You want to use the "Export File" destination, which you may have to add. Pick your codec, and let 'er rip.
9) When the rendering is done, you should have a video in your desired dimensions.
That's all there is to it. Hope this helps someone.
Dan
PS: Don't ask why someone would want to create an iPod video using FCPX. The point is that you may need to create a video with non-standard dimensions at some point in time, and this is how to do it.
PPS: Most of this information came from http://library.creativecow.net/articles/payton_t/FCPX_Custom-Resolution-Timeline s/video-tutorial. I just wrote it down, while I tried to do what the video suggested.

Instructions for using QuickTime Pro 7 to create a template video with unusual dimensions.
I suspect that anyone savy enough to be using FCPX has probably already figured out how to do this, either using my technique or another, so there probably isn't a real need for me to post this. For that matter, I may be the only person who cares about this at all. However, while I was trying to learn how to do all of this, I would have really appreciated having all the information in one place, so here goes.
If you want to create a video with unusual dimensions (like 640x1136) using my steps above, you'll need a "template" video first. Here's an easy way to create one, using any image editor, and QuickTime Pro 7.
1) Open QuickTime Pro 7 (QTP for short).
2) From the menu, select File->New Player. You'll get a window with just the bottom portion of the player, i.e. the playback controls.
3) Using an image editor, create a still image in the desired dimensions. You can use any image editor. It doesn't matter what the image contains (although it will end up showing as a thumbnail in FCPX).
4) Copy the image to the clipboard.
5) Switch back to QTP, and paste the image into the new player. Don't worry that there isn't a video window showing - just paste it into the window that has only playback controls. As soon as you do, the video window appears.
6) Advance to the end of the movie (the short, 1-frame movie), then hold down Command+V (paste) and keep holding it down to paste multiple images in. Watch the time advance. You could, if you want, just hold down Command+V until you get the length you want. But if you want a long video, there's an easier way:
7) When you reach a few seconds (or whatever duration your patience allows), select all (Command+A) and copy (Command+C). Then hold down Command+V to keep pasting in the longer clips. Wait until you reach a longer duration, then repeat the process. So, for example, 1 second, then 10 seconds, then 1 minute, then 10 minutes, then 1 hour. Or whatever you want.
8) Save the video however you want. I usually use File->Export with H.264, with Quality set to "Least". Just make sure you don't let it change the dimensions. If you resized the player window, depending on which "save" or "export" method you've chosen, it might default to the resized dimensions, so double check that to make sure.
That's it. You now have a template video you can use with my previous post(s).
Dan

Labview Real-Time and CompactRIO questions

Hi
everyone! We have new troubles about CompactRio and Real Time module:
-We want to
translate into real-time module a VI we have done with Labview 8 .2. In order
to do that we have discovered an option placed in Project Explorer (Tools->Real-Time
module->Communication Wizard) that seems to translate automatically into Real-Time
language. Is it true?
- If it was
true we would want to do a transmitter VI in CompactRio (RT target) and a receiver VI in the Host. But the
Communication Wizard creates a VI in the Host and a VI in the RT target (in
Real Time language) for each VI we enter to translate ( so we obtain 4 VI’s in
the same project , two of them as transmitter, and two of them as receiver)
-We have
tried to deploy some VI’s to the CompactRio and we get always an error.
CompactRio’s configuration is allright and it is well recognized by MAX. Why
does the error appear, and how can we work it out?
We
need to configure the Serial Port placed in CompactRio in order to adjust some
features, such us bauds value. MAX recognized the CompactRio’s Serial Port, but
all the opctions to configure them are disabled.
I hope you
can answer these questions. Thank you.
Ander

Hi again,
Still didn't find the problem on my side. Here's a picture of my code. If I put the code surrended in red at place (1), I don't get the error, but if I put the code at place (2), I get the error. Why oh why....?
I get the error when I close the browser or click Back button of the browser or Stop the application with the red dot or stop the application with the Quit button on my front panel.
This morning I found a post on this forum about getting an error using Property node and Remote panel (http://forums.ni.com/ni/board/message?board.id=170&message.id=252705). I did what they suggest: wire the property output to an indicator and it works (disable "Enable automatic error handling dialod" didn't work... I don't know why)... until I put extra code in my VI.
I really need help please!
Thank you
Stephanie
Attachments:
MemoryManager line 437 error.JPG ‏228 KB

How to run a midlet on a real device and other questions!!VERY VERY URGENT

Similar Messages

Maybe you are looking for