How to see the values of subtotal

Hi Gurus,
I have a small doubt regarding pricing procedure. In pricing procedure we have a column called Condition subtotal, it stores the value in the table and we can call this value whenever we required.
My question is here where we can see the subtotal value and how. I tried to view this value in table but it is a structure that is the reason i could not view it.
Please respond to this thread.
Thanks in advance.
Venkat.

Hi:
What you can do is to used subtotals on to the pricing procedure. If you uses subtotals 1 to 6 this will be store on table VBAP on field KZWI1 to KZWI6. You can also used other subtotals D to M is you want to used formulas.
Best Regards,
Federico

Similar Messages

How and where can i see the values of 0CURRENCY

Hi gurus,
How and where can i see the values of 0CURRENCY, for example if the key value is VEB how can i see it that means "Bolivares" , some days ago i had a similar doubt with 0UNIT, and some friend helped me , saying: go to the Transaction CUNI , and it works, but now my doubt is with 0CURRENCY, thanks guys !

Table TCURC will give you the long and short text for the currency keys. You can also display in a query by adding 0CURRENCY to the drilldown and displaying key and text.
Regards,
Kerry

Unable to see the values in detail block

Hello,
I have a master detail block, when I query the form, I am unable to see the values for a particular field(Column), all other columns appear properly in the details block, Upon checking the same table(s) in SQL ( by using the JOIN defined in the where clause of the relationship in Forms) , it shows the relevant records for all fields. So what could be wrong with the Form, please advise.
Thanks
FM

IQ wrote:
I have just checked the field its a non-database field which is being used as a LOV column to display a value derived from LOV. How do I make this populate at Query time, as obviously this works when the Form is in a insert mode but not for Query mode. How to make it work for Query ? As it for LOV column and non-database filed, ignore my first suggestion.
Does your non-database filed has associate any column ?
For example, you have SUPPLIER_ID (database column) and SUPPLIER_NAME (non-database column). SUPPLIER_NAME has LOV column. And when selecting supplier name from LOV value also assign at supplier_id.
Now to show supplier name when querying, you have to write POST-CHANGE trigger at supplier_id. like
SELECT ASSC_CODE INTO :MST_SUPPLIER.ACC_CODE
FROM ACC_SUB_SUB_CONTROL
WHERE ASSC_ID=:MST_SUPPLIER.SUPP_ASSC_ID;Hope this helps

How to get the value from databank

Hi,
How to get the value from databank? and how to set the same value to visual script object?
thanks,
ra

Hi,
You can use GetDatabankValue(HeaderName, Value) to get the value from databank and SetDataBankValue(HeaderName, Value) to set the value to databank.
You can refer to the API Reference to see list of associated functions and techniques we can use with related to Data Bank.
This is the for OFT but if you are using Open Script then you have direct access for getting the databank value but when it comes to setting a value you have to use File operation and write you own methods to do the set operation.
Thanks
Edited by: Openscript User 100 on Nov 13, 2009 7:01 AM

How to get the values and attributes of Longlived processes by using ProcessID.

Hi Experts,
For every process we creates, LC ES2 creates processID.
we know that if you creates a long lived process, all the values which are in proces will be stored some where in DB.
Here my requirement is by using processID I need to get all/some values/variables stored in database.
I am not able to get values using processID. Here I don't have clue on how to get the values.
Please tell me how to get the same by using Process Management. Link/guide would be helpful
Thanks
Praveen.

Searchable means you can put a filter criteria on it (e.g. where amount > 50000)
Visible means you can add have this column returned as an output (and therefore you can add it as column in listview and see it in Task Details).
These two attributes were provided so that queries could be done against the process variables, but the exact contents of the variables are not allowed to be seen.

How to Get the value in a new created view.

Hi Experts,
I have create a view along with the fields: Street No. , Street name, apt no,
how should i capture these values . in a current situation i entering the value but when i check in the debugging mode : in a collection_wrapper (context node class) i am not able the see the value which i have entered. please help me out. it is very urgent.
Rohit

Hi Ashish,
Thanks for replying. i have already create the context node and in the using the request from field method ,i am getting the value in my work area but how to store the value in the custom fields of that particular order as well as store the value in the crmd_customer_i table...
Regards,
Rohit

How to display the value of a column in a chart at the top of each column

How to display the value of each column in a chart at the top of each column?

Like this?
Done using chart Inspector.
For details, see Chapter 7, Creating Charts from Numerical Data in the Numbers '09 User Guide. The guide may be downloaded via the Help menu in Numbers.
Regards,
Barry

How to get the value field of the return parameters for an action step in teststand sequence file programatically using c#

                Sequence mySequence = myEngine.NewSequence();
                mySequence.Name = "myAction";
                //Create new step of type Action and set Name
                Step mystep = myEngine.NewStep(AdapterKeyNames.DotNetAdapterKeyname, StepTypes.StepType_Action);
                mystep.Name = "GetStringObject";
                //Obtain the code module from the step
                DotNetModule myModule = mystep.Module as DotNetModule;
                //Set properties of the module
                myModule.SetAssembly(DotNetModuleAssemblyLocations.DotNetModule_AssemblyLocation_File, @"C:\Documents and Settings\My Documents\Visual Studio 2005\Projects\HelperClass\HelperClass\bin\Debug\HelperClass.dll");
                myModule.ClassName = "Class1";
                myModule.MemberType = DotNetModuleMemberTypes.DotNetMember_GetProperty;
                myModule.MemberName = "StringObject";
                mySequence.InsertStep(mystep, 0, StepGroups.StepGroup_Setup);
                mySequence.Locals.NewSubProperty("StringObject", PropertyValueTypes.PropValType_Reference, false, "", 0);
                DotNetParameterDirections reference = mySequence.Locals as DotNetParameterDirections;
                mySequence.Locals.GetPropertyObject("StringObject", 0);
                myModule.ClassReference = "Locals.StringObject";
                myModule.LoadPrototypeFromMetadataToken(385875969, 0);
After this I am not able to proceed.herewith attached documents contain screenshot of teststand file marked red is to be solved. How to define the value field of the return parameters?
Attachments:
HelperClass.cs ‏1 KB
ex1.gif ‏2305 KB

Please see my answer to your question on page two of the following forum thread:
Programmatically generating DotNet Steps in TestStand
Manooch H.
National Instruments

How to see the result

hi every body...
i want to get the result of any table..
for ex: select * from dept;
the o/p should be like(10~Accounts~new york)
for this i wrote this code.... it run sucessfully;
my prob is how to see the Result..
declare
tn varchar2(35);
sqlstmt varchar2(2000);
rc sys_refcursor;
begin
tn := '&tn';
sqlstmt := 'select * from '||tn;
open rc for sqlstmt;
end;
post u r comments,Hints and suggestion...

post u r comments,Hints and suggestion...
SQL> var rc refcursor
SQL> begin
2     open :rc for 'select * from &tn';
3 end;
4 /
Enter value for tn: emp
old   2:    open :rc for 'select * from &tn';
new   2:    open :rc for 'select * from emp';
PL/SQL procedure successfully completed.
SQL> print rc
     EMPNO ENAME      JOB              MGR HIREDATE         SAL       COMM     DEPTNO
      7369 SPENCER    CLERK           7902 17-DEC-80        800                    20
      7499 VERREYNNE SALESMAN        7698 20-FEB-81       1600        300         30
      7521 VAN WIJK   SALESMAN        7698 22-FEB-81       1250        500         30
      7566 MAINGUY    MANAGER         7839 02-APR-81       2975                    20
      7654 KISHORE    SALESMAN        7698 28-SEP-81       1250       1400         30
      7698 BARRY      MANAGER         7839 01-MAY-81       2850                    30
      7782 BOEHMER    MANAGER         7839 09-JUN-81       2695                    10
      7788 PADFIELD   ANALYST         7566 09-DEC-82       3000                    20
      7839 SCHNEIDER PRESIDENT            17-NOV-81       5500                    10
      7844 GASPAROTTO SALESMAN        7698 08-SEP-81       1500          0         30
      7876 CAVE       CLERK           7788 12-JAN-83       1100                    20
      7900 CLARKE     CLERK           7698 03-DEC-81        950                    30
      7902 JAFFAR     ANALYST         7566 03-DEC-81       3000                    20
      7934 ROBERTSON CLERK           7782 23-JAN-82       1430                    10
       109 JOMAR                                                                   30
      8800 VISWARAYAR INTERN          7934 03-OCT-82          0                    10
16 rows selected.
SQL> Cheers, APC
Blog : http://radiofreetooting.blogspot.com/

How to see the content of an attachment in sxmb_moni

Hi all,
Does someone know how to see the actual content of an attachment in sxmb_moni?
If I look under Inbound Message (CENTRAL)/Payloads, I would see one node for MainDocument and another node with the name of the attachment.
When I click on the attachment name, a word document shows with one line in it. That line is just the name of the attachment and nothing else.
How can I see the actual content of that attachment?
Thank you. Points will be awarded to helpful answers.
Regards,
-Michelle

I checked my coding again in debug mode. I cannot find anything wrong.
I duplicate here my coding again.
   DATA lo_attachment TYPE REF TO if_ai_attachment.
lo_attachment = lo_attachment_protocol->get_attachment_from_binary(
                      data = iv_attachment_content
                      type = iv_attachment_mime_type
                      name = iv_attachment_name
* set the attachment
DATA lt_attachments TYPE prx_attach.
APPEND lo_attachment TO lt_attachments.
lo_attachment_protocol->set_attachments( lt_attachments ).
The local variable LT_ATTACHMENTS has field payload-resource with the following expected values --
KIND : B
TYPE : application/msword
BINDATA : 00530068006F00740073005F0073007700630076002E0064006F00630020002000
The BINDATA correctly contains the dummy data I assigned.
I must have missed something. Can someone help?
Best regards,
-Michelle

How to change the value of the Selection field in the ROOSFIELD table for o

Hi there
I have a standard data source 0CRM_SALES_ACT_1 for which one of the standard field has the status A(Hidden).
In the field selection filed of the table ROOSFIELD and I want to change it to P(Visible) for one of the field in the Data source.
How it can be done. Any suggestion will be greatly appreciated.
kind regards
Sarah

Hi,
Keerthi
Good Question..Even am also new to this issue.
But let me try to find the solution.
Before lookinto this issue. i need clarification on this.
1. You want to see the value in the text box as a color one or you want to change the disable from true to false?
If that is the case, then following one is my suggestion.
In proceesRequest method
1. get the handle for the messageTextInput Bean and based on that set the disable property to false
for example:
OAMessageTextInputBean t1 = (OAMessageTextInputBean )webBean.findChildRecurrsive("ItemId");
t1.setDiabled(false);
In ProcessFormRequest method
1. get the handle for the messageTextInput Bean and based on that set the style class or css property to "OraFieldText"
for example:
OAMessageTextInputBean t1 = (OAMessageTextInputBean )webBean.findChildRecurrsive("ItemId");
t1.setCss(OraFieldText);
(Or)
If it will not work then directly set the cssClass Property to OraFieldText.
I hope it will work....am not sure about this.
Regards
Santhosh kumar.k

How to see the source of the attribute in a workflow

Here is an workflow function which is defined as follows
Item Type :HR
Internal Name: HR_MAINTAIN_MAIN_ADDR_JSP_FCT
Function Name: HR_WORKFLOW_SERVICE.BLOCK
Node Attributes :
Name: HrActivity Type: value: JSP
Name: HrActivityTypeVAlue Value:HR_MAIN_ADDR_TOP_SS
I do not find that HR_MAIN_ADDR_TOP_SS is mapped to any OAF page
What is HR_MAIN_ADDR_TOP_SS?
How to see the source code of HR_MAIN_ADDR_TOP_SS. Is there any SQL query to get the source of this.

http://hostname:8027/OA_HTML/OA.jsp?_rc=HR_MAIN_ADDR_ACT_TYPE_TOP_SS&_ri=800&OAFunc=XXCHR_ESS_PER_INFO&_ti=1902574799&retainAM=Y&addBreadCrumb=N&oapc=11&oas=zgiSEq6kVqEuZNnwZ5lP5g..
what is HR_MAIN_ADDR_ACT_TYPE_TOP_SS in the above URL

How to determine the value of -D__SUNPRO_CC?

Could any body tell me how to determine the value of -D__SUNPRO_CC? Iam now using Sun Studio 9.
Thanks in advance.

The C++ Users Guide describes all the predefined macros set by the compiler.
The __SUNPRO_CC macro is a 3-digit hex number. The first digit is the C++ compiler major version number, which is 5 for all releases from WorkShop 5 in 1998 through the current release, Sun Studio 10. The second digit is the minor version number, increasing by 1 for each release in the major release series. The 3rd digit is a place holder for the very rare (none since 1994) cases when we have a micro version number. It is zero in current releases.
The current compiler release is C++ 5.7, so __SUNPRO_CC is set to 0x570.
You can see the macro setting by running
CC -dryrun -c foo.cc
and look for the -D__SUNPRO_CC =0xNNN on the ccfe command line.

How to check the value in Table CDPOS

Mostly I can't see the following fields value in the table CDPOS,
(1) CDPOS-VALUE_NEW
(2) CDPOS-VALUE_OLD
In fact, it should have values, so how to check the values, is there any special method needed?
Thanks and best regards.

Ferry Lianto,
Thank you very much for your expertise.
It's helpful to get some contents via FM:CHANGEDOCUMENT_READ_POSITIONS, the problem is, to some kind of DELETION operation, the log in table CDPOS is very simple, I still don't know which contents were deleted even though I found records in table CDPOS.
Is there any other suggestions?
Thanks and best regards.

How to set the value in SelectOneChoice

Hi,
I need an help....
can anyone please tell me how to set the value in SelectOneChoice.
I want to set the value at index 3
i am trying selectOneChoice1.setvalue(new Integer(3)); but it is throwing an NullPointerException.
Thanks,
Neha

Hi,
is it ADF bound? If so then you set the default value to the list binding in the PageDef file. The value of the component must be bound to a method expression, which is why you see an exception. However, I think we need more information
Frank

How to see the values of subtotal

Similar Messages

Maybe you are looking for