How to send images using Tuxedo 6.5

What would be the best way to send images( bmp, jpeg, gif) using Tuxedo 6.5? Ideally,
I would like to keep the image with the data, ie., have the image as a field in
the FML32 buffer. I can't see anyway of doing this... Create a new buffer type??
Thanks
Rich

Rich,
How about storing the binary image in an FML field of type CARRAY?
Be aware of the performance impact of very large buffers - >75% of MSGMNB (I
think) and they're transferred by file i/o -
Regards,
Peter.
Rich Wojcik wrote:
What would be the best way to send images( bmp, jpeg, gif) using Tuxedo 6.5? Ideally,
I would like to keep the image with the data, ie., have the image as a field in
the FML32 buffer. I can't see anyway of doing this... Create a new buffer type??
Thanks
Rich

Similar Messages

How to send images using SOAP adapter

hi All,
I want to send images using the SOAP adapter . ( Sender and Receiver )
Can anybody help out with this requirement
Regards,
Loveena

Hi,
Following links may help U
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/29/5bd93f130f9215e10000000a155106/frameset.htm
to know the basics about soap adapter u cn check out this link
/people/padmankumar.sahoo/blog/2005/02/15/an-overview-of-soap
to get in detail about the attachments chk out this link
hi i am unable to attach an attachment in File to mail scenario
Regards
Pullarao

How to send images through PI using SOAP adapter

hi,
Can anybody tell me how to send images through PI using SOAP adapter.
Regards ,
Loveena

Hi Loveena,
only as attachments of a SOAP message.
Regards,
Udo

How to send image file through mail without any attachment

Plz tell me how to send image file through mail without any attachment ( i mean not converting that image into pdf or any format ) i want to send that text or image through mail .

Hi Sandeep,
I think you can setup the type of email in Shared office Settings in transaction S016.
There is an option called <Preset document classes>
You choose this pushbutton to branch to the maintenance screen for the document classes that are directly displayed to users in the Business Workplace for selection when they use the Create function. The name under which the documents are displayed can also be maintained.
http://help.sap.com/saphelp_nw70/helpdata/en/6c/69c30f418d11d1896e0000e8322d00/content.htm
Haven't tried it though.
Regards,
Siddhesh

How to send image as a part of body with java mail

How to send image (.GIF) file in mail body & not as an attachement using java mail API

You need to create a multipart/related message.
You'll probably find examples in this forum.

How can send mails using hotmail/rediffmail domain name?

I have used the below code to send a mail using javamail API?Even when I am sending my application does not have notified any of error/exceptions,But the message is not reached to I have given receipient's address in the to field.
import javax.mail.*;
import javax.mail.internet.*;
import javax.activation.*;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.*;
public class Sendmail1 extends HttpServlet {
private String smtpHost;
// Initialize the servlet with the hostname of the SMTP server
// we'll be using the send the messages
public void init(ServletConfig config)
throws ServletException {
super.init(config);
smtpHost = config.getInitParameter("smtpHost");
//smtpHost = "sbm5501";
smtpHost = "www.rediffmail.com";
public void doGet(HttpServletRequest request,HttpServletResponse response)
throws ServletException, java.io.IOException {
String from = request.getParameter("from");
String to "[email protected]";
String cc = "[email protected]";
String bcc ="[email protected]";
String smtp ="www.rediffmail.com";
String subject = "hai";
String text = "Hai how r u";
PrintWriter writer = response.getWriter();
if (subject == null)
subject = "Null";
if (text == null)
text = "No message";
String status;
try {
// Create the JavaMail session
java.util.Properties properties = System.getProperties();
if (smtp == null)
smtp = "www.rediffmail.com";
properties.put("mail.smtp.host", smtp);
Session session = Session.getInstance(properties, null);
//to connect
//Transport transport =session.getTransport("smtp");
//transport.connect(smtpHost,user,password);
// Construct the message
MimeMessage message = new MimeMessage(session);
// Set the from address
Address fromAddress = new InternetAddress(from);
message.setFrom(fromAddress);
// Parse and set the recipient addresses
Address[] toAddresses = InternetAddress.parse(to);
message.setRecipients(Message.RecipientType.TO,toAddresses);
Address[] ccAddresses = InternetAddress.parse(cc);
message.setRecipients(Message.RecipientType.CC,ccAddresses);
Address[] bccAddresses = InternetAddress.parse(to);
message.setRecipients(Message.RecipientType.BCC,bccAddresses);
// Set the subject and text
message.setSubject(subject);
message.setText(text);
Transport.send(message);
//status = "<h1>Congratulations,</h1><h2>Your message was sent.</h2>";
} catch (AddressException e)
status = "There was an error parsing the addresses. " + e;
} catch (SendFailedException e)
status = "<h1>Sorry,</h1><h2>There was an error sending the message.</h2>" + e;
} catch (MessagingException e)
status = "There was an unexpected error. " + e;
// Output a status message
response.setContentType("text/html");
writer.println("<title>sendForm</title><body bgcolor= ><b><h3><font color=green><CENTER>CALIBERINFO.COM</CENTER></h3>Your message was sent to recepient(s).<br><font color=red>"+"\n"+to);
writer.println("<br><br><a href=e:/mail/javamail/mail.html>back to compose</a>");
writer.close();
Please any one help me out from this probs.
Awaiting for yours reply,
or give me a reply to: [email protected]
Regards,
@maheshkumar.k

Hi,
how can send mails using hotmail/rediffmail domain name?In your java application,you specified www.rediffmail.com as your
smtp server.But that is the address of that website.Try will a smtp
server instead.For a list of free smtp servers,please visit http://www.thebestfree.net/free/freesmtp.htm
Hope this helps.
Good Luck.
Gayam.Srinivasa Reddy
Developer Technical Support
Sun Microsystems
http://www.sun.com/developers/support/

Hello, i am new to the mac and i need to learn how to re image using an external hard drive

Hello, i am new, like baby fresh new,...lol, to the mac and i need to learn how to re-image using an external hard drive.

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

How to send attachments using java application and outlook

Hi ,
I created an application in java which is as
on the Conference Tab i can schedule a conference and with the send command on page it map all the scheduled data to outlook(with all conference details) and using outlook send option the mails are send to appropriate user.
but now i want to modify this application such as when i use the send command from my jsp page it should attach the file that is in .vcs or .ics format for auto updation of user calender.
can any one know how to send attachment using java application .

Last time I checked, SMS was a service between carriers and doing SMS yourself was really tricky. Some services existed to let you do it but as I recall they wanted non-trivial money.
However, most phone carriers provide an email-to-SMS bridge of some kind.
So the easiest thing is just to send an email.
That's sending from a non-phone to a phone. There's a J2ME library to send/receive SMS from/to a phone.
However, this is from memory, and a little out of date, so I could be entirely wrong. Hope it helps anyway.

Some recipients receive my images attached to emails, some find they are embedded and difficult to impossible to separate. Just found out that if I remove my attached signature, the problem goes away. How to send images signature reliably?

Some recipients receive my images attached to emails, some find they are embedded and difficult to impossible to separate. Just found out that if I remove my attached signature, the problem goes away. How to send images plus signature reliably?

When you attach things, make sure to check the box that says [√] Send Windows-Friendly attachments

How to resize image using java imageio

Hello ,
I want to know how to resize image using java imageio.
I dont want to use java awt because i am writing a web application.
help is very much needed
thank you.

Just use an AffineTransform !
Its much easier

How to get image using Http and how to save in Smulator

Hi guys,
Am working in black berry bold. i dont know how to get image using htp connection and one more thing i need to save this image in side simulator directory............. what are the specific API i should...
Guide me.........

If you want the input image size you need to pass it in as parameters.
A discussion thread on this topic is:
http://forums.adobe.com/thread/29948
-- Daniel R. <[email protected]> http://danielr.neophi.com/

How to send attachments using HTTP Binding Adapter?

How to send attachments using HTTP Binding Adapter in Jdeveloper?
Requirement: I need to send attachments to a system which can communicate with the middleware using https only.
Kindly suggest..
Edited by: Richa Juneja on Jan 28, 2013 4:03 AM

Hi,
Following links may help U
/people/siva.maranani/blog/2005/09/03/invoke-webservices-using-sapxi
http://help.sap.com/saphelp_nw04/helpdata/en/3c/b4a6490a08cd41a8c91759c3d2f401/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/29/5bd93f130f9215e10000000a155106/frameset.htm
to know the basics about soap adapter u cn check out this link
/people/padmankumar.sahoo/blog/2005/02/15/an-overview-of-soap
to get in detail about the attachments chk out this link
hi i am unable to attach an attachment in File to mail scenario
Regards
Pullarao

How to upload image using JSP

hi,
i am confronting a problem how to upload image from local PC to web server . I am using Tomcat 4.0
please help me by sending code
thanks

Hi,
Here is the solution for uploading images and displaying images. I am using struts with JSP, so this code has a Action and ActionForm class. You can put the same code in Java Beans or Servlet class to run it. This code has two JSP files - one for Upload (upload.jsp)and other for Image(image.jsp) display. It has a Servlet also to display the image. Here is the code file wise.
Upload.jsp **********************************************************
<%@ taglib uri="/WEB-INF/struts-logic.tld" prefix="logic" %>
<%@ taglib uri="/WEB-INF/struts-template.tld" prefix="template" %>
<%@ taglib uri="/WEB-INF/struts-bean.tld" prefix="bean" %>
<%@ taglib uri="/WEB-INF/struts-html.tld" prefix="html" %>
<html:html>
<head>
<title>New Page 1</title>
</head>
<body>
<html:form action="uploadAction.do" enctype="multipart/form-data" method="POST">
<p>File to upload
<html:file property="fileUpload" size="20"/></p>
<p><html:submit value="Upload" property="upload"/></p>
<p> </p>
<p><html:img src="image.jsp"/></p>
<p> </p>
</html:form>
</body>
</html:html>
Image.jsp*****************************************************************
<jsp:useBean id="upload" class="uploadtest.uploadActionForm" scope="session">
</jsp:useBean>
<%
     byte[] rgb=(byte[])session.getAttribute("byte");
     request.setAttribute("byArr", rgb);
%>

Image is<p>
<jsp:forward page="/showimage" />
Struts Action Class - UploadAction.java **************************************************
import javax.servlet.http.*;
import java.io.*;
import org.apache.struts.upload.FormFile;
import org.apache.struts.action.*;
public class uploadAction extends Action {
public ActionForward execute(ActionMapping actionMapping, ActionForm actionForm, HttpServletRequest httpServletRequest, HttpServletResponse httpServletResponse) {
uploadActionForm upload = (uploadActionForm) actionForm;
try {
int size=upload.getFileUpload().getFileSize();
//if (image != null) {
byte[] byteArr = new byte[size];
//Create an input stream to read the uploaded file.
ByteArrayInputStream bytein = new ByteArrayInputStream(upload.getFileUpload().getFileData());
// Load the input stream into the byte Array.
bytein.read(byteArr);
// Close the input stream.
bytein.close();
// Load the byte[] into the content field.
upload.setContent(byteArr);
HttpSession ses=httpServletRequest.getSession();
ses.setAttribute("byte",byteArr);
return actionMapping.findForward("success");
} catch (Exception ex) {
ex.printStackTrace();
return actionMapping.findForward("success");
Struts ActionForm class ---uploadActionForm.java***************************************************
package uploadtest;
import org.apache.struts.action.*;
import org.apache.struts.upload.*;
import javax.servlet.http.*;
public class uploadActionForm extends ActionForm {
private FormFile fileUpload;
private byte[] content;
public FormFile getFileUpload() {
return fileUpload;
public void setFileUpload(FormFile fileUpload) {
this.fileUpload = fileUpload;
public byte[] getContent()
return content;
public void setContent(byte[] theFile)
this.content = theFile;
public ActionErrors validate(ActionMapping actionMapping, HttpServletRequest httpServletRequest) {
/**@todo: finish this method, this is just the skeleton.*/
return null;
public void reset(ActionMapping actionMapping, HttpServletRequest httpServletRequest) {
Servlet to display image --- ShowImage.java ********************************************************
import java.io.*;
import java.util.*;
public class ShowImage extends HttpServlet {
//Initialize global variables
protected void service(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
byte[] rgb = (byte[]) request.getAttribute("byArr");
if (rgb != null)
response.setContentType("image/gif");
OutputStream stream = response.getOutputStream();
stream.write(rgb);
else
response.setContentType("text");
response.getWriter().write("attribute byArr not found");
This code will enable to to upload and display the image. If you know Struts, then you can write the Struts-Config.xml file by yourself. Other wise write to me, I will send you that. If you want to save the image in database, then you have to keep it as BLOB datatype is database. For database you need to send the byte array in the uploadAction.java file to database. Database will keep the image as binary.
Thanks
Amit

How to send data using serial Communication

I want to make serial communication using RXTXcomm.jar file.I was written the code.From this I got the list of serial ports avilable on pc but then after when I was tring to send command to machine which is attached to port it didn't gave any reply.
Tell me that how to send command to port?

This is how I do it:// open port, get ownership
SerialPort serialPort= (SerialPort)portId.open(APPLICATIONNAME, timeout);
// no framing and no threshold
serialPort.disableReceiveFraming();
serialPort.disableReceiveThreshold();
// communication speed, parity, stopbits and databits
serialPort.setSerialPortParams(BAUDRATE, SerialPort.DATABITS_8,
SerialPort.STOPBITS_1, SerialPort.PARITY_NONE);
// no handshaking or other flow control
serialPort.setFlowControlMode(SerialPort.FLOWCONTROL_NONE);
// timer on any read of the serial port
serialPort.enableReceiveTimeout(TIMEOUT);
// open streams for reading and writing
InputStream is= serialPort.getInputStream();
OutputStream os= serialPort.getOutputStream();... then you use the 'os' stream for writing and the 'is' stream for reading.
kind regards,
Jos

How to send XML using UTL_HTTP

I am trying to workout how to send XML data to a webserver using UTL_HTTP but am not getting any reply
I need to submit the following XML document to a server "http://api.fastsms.co.uk/api/xmlapi.php" Their instructions are "The XML Document should be posted unencoded, with a UTF-8 character set as parameter 'xml'"
If I submit the following XML on their test form
<?xml version="1.0"?>
<apirequest version="1">
<user>
<username>**USER**</username>
<password>**PASSWORD**</password>
</user>
<application>
<name>Example Application</name>
<version>1.0</version>
</application>
<inboundcheck lastid="10711399"/>
</apirequest>
I get an XML response back with the messages in my inbox.
This is the code I am trying to use to accomplish the same from PL/SQL : I know a response is coming back as there is header information - just no content. What am I doing wrong ?
l_xml VARCHAR2(5000);
req utl_http.req;
resp utl_http.resp;
header_name VARCHAR2(256); -- Response header name
header_value VARCHAR2(1024); -- Response header value
response_text VARCHAR2(4000); -- Response body
l_url VARCHAR2(100);
BEGIN
l_xml := 'xml=<?xml version="1.0"?>';
l_xml := '<apirequest version="1">';
l_xml := '<user>';
l_xml := '<username>**USER**</username>';
l_xml := '<password>**PASSWORD**</password>';
l_xml := '</user>';
l_xml := '<application>';
l_xml := '<name>Example Application</name>';
l_xml := '<version>1.0</version>';
l_xml := '</application>';
l_xml := '<inboundcheck lastid="10711399"/>';
l_xml := '</apirequest>';
-- Open HTTP connection
l_url := 'http://api.fastsms.co.uk/api/xmlapi.php';
req := utl_http.begin_request(l_url,'POST',utl_http.HTTP_VERSION_1_1);
-- Set headers for type and length
utl_http.set_header(req,'Content-Type','application/x-www-form-urlencoded');
utl_http.set_header(req,'Content-Length',to_char(length(l_xml)));
-- Write parameter
utl_http.write_text(req,l_xml);
-- Read response file
resp := utl_http.get_response(req);
-- Print out the response headers
FOR i IN 1 .. utl_http.get_header_count(resp) LOOP
    utl_http.get_header(resp,i,header_name,header_value);
    logging_pkg.info(header_name || ': ' || header_value);
END LOOP;
-- Print out the response body
BEGIN
    LOOP
      utl_http.read_text(resp,response_text);
      logging_pkg.info(response_text);
    END LOOP;
EXCEPTION
    WHEN utl_http.end_of_body THEN
      logging_pkg.info('End of body');
END;
-- close http connection
utl_http.end_response(resp);
EXCEPTION
    WHEN utl_http.end_of_body THEN
      utl_http.end_response(resp);
END;
Cheers,
Brent

Hi Billy
Yikes - how embarassing ! Thanks for pointing out my beginners mistake there. I've fixed my code - and also implemented the substitutions of parameters like you suggested - I like that approach.
Unfortunately the end result is no better - the line
utl_http.read_text(resp,response_text);
Still returns nothing back
The headers that are coming back are
Date: Thu, 04 Jul 2013 08:31:56 GMT
Server: Apache/2.2.16 (Ubuntu)
X-Powered-By: PHP/5.3.3-1ubuntu9.3
Expires: Thu, 19 Nov 1981 08:52:00 GMT
Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0
Pragma: no-cache
Vary: Accept-Encoding
Content-Length: 0
Content-Type: text/html; charset=UTF-8
Connection: close
I guess I will need to try chasing it with the fastsms vendor so see if they can check my incoming request and see if there are any glaring problems. I know the xml is correct as I am now logging the xml string just before I send it and when I take that string and put it in their test form it works perfectly - something else in the puzzle is missing. I've had no experience using utl_http before - perhaps it's no possible to read the xml repsonse using this ?
Anyway, thanks for your help Billy.
ps - How do you paste your code into your message to get that formatting ?
Cheers,
Brent

How to send images using Tuxedo 6.5

Similar Messages

Maybe you are looking for