How to send message/traffic accross VME bus from NI's VME MXI-2 card So I can monitor messages via vmetro card?

Hi,
How to send message/traffic accross VME bus backplane from NI's VME MXI-2 card?
So that I can monitor messages via vmetro card/BusView?
Thanks
DBhagat

Hi Dbhagat,
The VME-MXI-2 card is a type of VME controller, which is used in conjunction with a PCI-MXI-2 card that will be in an external computer. This computer is then able to send and receive messages to other devices on the VME bus, as well as monitor the information on the bus.
Hope this helps!
john
Applications Engineer

Similar Messages

How to send a Mail purchase order automaticaly from ME22N

How to send a Mail purchase order automaticaly from ME22N

Hi,
First create an entry via NACE with medium = 5 ( External send ) with all other details same as normal print option. Now ensure that vendor master of the po has got the external e-mail id of the vendor. Now go to ME22n in mesages create a message with medium = 5 ( External Send ). Go to communication method, key in Communication strategy.Go to Further date & against Despatch time pick up option 4 viz. Send immeidately while saving an application. Now once you press the save button it will be sent to the address maintained in the vendor master of the vendor of the PO. Please note you require some basic settings from BASIS side as well.
I hope this helps,
You may also refer to the SAP note 191470.
Regards
Raju Chitale

How to send a mail with HTML body from Oracle

Hi Team,
Can somebody guide me how to send a mail with HTML body from oracle.
Here is the piece of code i am trying to send a mail.
procedure SEND_MAIL is
cursor c_1 is select * from table_name;
l_mail_id varchar2(40);
-- ls_mailhost VARCHAR2(64) := Mailhost;
ls_from VARCHAR2(64) := ‘[email protected]’
ls_subject VARCHAR2(200);
ls_to VARCHAR2(64);
l_mail_conn UTL_SMTP.connection;
ls_left_menu_name VARCHAR2(64);
ll_emp_num number(8);
begin
for i in c_1 loop
begin
l_mail_conn := UTL_SMTP.OPEN_CONNECTION('IP');
UTL_SMTP.HELO(l_mail_conn, 'IP');
UTL_SMTP.MAIL(l_mail_conn, LS_FROM);
UTL_SMTP.RCPT(L_mail_conn, LS_TO);
UTL_SMTP.DATA(l_mail_conn,'From: ' ||ls_from || utl_tcp.crlf ||
'To: ' ||ls_to || utl_tcp.crlf ||
'Subject: ' ||ls_subject|| utl_tcp.crlf);
UTL_SMTP.QUIT(l_mail_conn);
exception
when no_data_found then
null;
when others then
RAISE_APPLICATION_ERROR(-20000, 'Failed to send mail due to the following error: ' || sqlerrm);
end;
end loop;
end;
Thnx

Hi Nicolas!
Have you tried to set "Output Format" for "RAW Text" to HTM in SCOT.
If HTM is missing in your dropdown-list, you could check out table SXCONVERT2. Copy the line with category T/format TXT, and change the format from TXT to HTM. The existing function
SX_OBJECT_CONVERT__T.TXT does not need to be changed. Now you should be able to choose HTM in SCOT. You will probably need som HTML-tags in your text to make it look good.
Hope this helps!
Regards
Geir

How To send DMS(Documents cv01,cv03n,cv04n) from one sap system to othersap

Hello Experts,
I am working Document management system(CV01,cv02n,cv03n,cv04n)...
I want to send the documents from one SAP system to Other SAP system
Using ALE/Idocs....
Please Help on this any sample programs....or function module....
Thanks
Preethi

Hello,
Please refer to the thread:
How To send DMS(Documents cv01,cv03n,cv04n) from one sap system to othersap
Best Regards, Murugesh AS

How to send print through your phone away from your neighbour hood

how to send print through your phone away from your neighbour hood

Hi there, I'm not exactly sure what your specific question is but it sounds like your inquiring about remote printing i.e. being able to print to a printer that's not on your local network. HP's ePrint solution allows you to do this and here's a link to find out more about the solution https://h30495.www3.hp.com/help/about.
Hope this information is useful and post back if you've more questions. Best of luck.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

How do i get a radio station number from down load the station tomy ipod, how do i get a radio station number from itunes it only plays on the computer i can not down load the station tomy ipod

How do i get a radio station number from itunes it only plays on the computer i can not down load the station number as it does not show one to my ipod

Which iPod?
iPod Manuals
iPod Models

How to send a mail to a person from after completeing bdc .

Hi Xperts,
Please send me a options how to send a mail to a person after completing a bdc or from any report program.
mailed can be a sapuser or other service provider(ex:yahoo,gmail.any thing)
Please Any one i want it now .
Thank You.

FUNCTION RS_SEND_MAIL_FOR_SPOO* Email ITAB structure
DATA: BEGIN OF EMAIL_ITAB OCCURS 10.
        INCLUDE STRUCTURE SOLI.
DATA: END OF EMAIL_ITAB.
DATA: T_EMAIL LIKE SOOS1-RECEXTNAM. "EMail distribution list
CONSTANTS: C_EMAIL_DISTRIBUTION LIKE SOOS1-RECEXTNAM VALUE
           [email protected],[email protected].
Initialization
REFRESH EMAIL_ITAB.
Populate data
EMAIL_ITAB-LINE = Email body text 1.
APPEND EMAIL_ITAB.
EMAIL_ITAB-LINE = Email body text 2.
APPEND EMAIL_ITAB.
T_EMAIL = C_EMAIL_DISTRIBUTION.
--- EMAIL FUNCTION ---------------------------------------------------
REQUIRMENTS:
1) The user running the program needs a valid email address in their
   address portion of tx SU01 under external comms -> SMTP -> internet
   address.
2) A job called SAP_EMAIL is running with the following parameters:
   Program: RSCONN01 Variant: INT   User: XXX
   This program moves mail from the outbox to the mail server using
   RFC destination: SAP_INTERNET_GATEWAY_SERVER
INTERFACE:
1) APPLICATION: Anything
2) EMAILTITLE: EMail subject
3) RECEXTNAM:   EMail distribution lists separated by commas
4) TEXTTAB:     Internal table for lines of the email message
EXCEPTIONS:
Send OK = 0 otherwise there was a problem with the send.
    CALL FUNCTION 'Z_SEND_EMAIL_ITAB'
         EXPORTING
              APPLICATION = 'EMAIL'
              EMAILTITLE = 'Email Subject'
              RECEXTNAM   = T_EMAIL
         TABLES
              TEXTTAB     = EMAIL_ITAB
         EXCEPTIONS
              OTHERS      = 1.
Function Z_SEND_EMAIL_ITAB
""Local interface:
*"       IMPORTING
*"             VALUE(APPLICATION) LIKE SOOD1-OBJNAM
*"             VALUE(EMAILTITLE) LIKE SOOD1-OBJDES
*"             VALUE(RECEXTNAM) LIKE SOOS1-RECEXTNAM
*"       TABLES
*"              TEXTTAB STRUCTURE SOLI
*- local data declaration
DATA: OHD    LIKE SOOD1,
        OID    LIKE SOODK,
        TO_ALL LIKE SONV-FLAG,
        OKEY   LIKE SWOTOBJID-OBJKEY.
DATA: BEGIN OF RECEIVERS OCCURS 0.
          INCLUDE STRUCTURE SOOS1.
DATA: END OF RECEIVERS.
*- fill odh
CLEAR OHD.
OHD-OBJLA    = SY-LANGU.
OHD-OBJNAM   = APPLICATION.
OHD-OBJDES   = EMAILTITLE.
OHD-OBJPRI   = 3.
OHD-OBJSNS   = 'F'.
OHD-OWNNAM   = SY-UNAME.
*- send Email
CONDENSE RECEXTNAM NO-GAPS.
CHECK RECEXTNAM <> SPACE AND RECEXTNAM CS '@'.
*- for every individual recipient send an Email
(see OSS message 0120050409/0000362105/1999)
WHILE RECEXTNAM CS ','.
    PERFORM INIT_REC TABLES RECEIVERS.
    READ TABLE RECEIVERS INDEX 1.
    RECEIVERS-RECEXTNAM = RECEXTNAM+0(SY-FDPOS).
    ADD 1 TO SY-FDPOS.
    SHIFT RECEXTNAM LEFT BY SY-FDPOS PLACES.
    MODIFY RECEIVERS INDEX 1.
    PERFORM SO_OBJECT_SEND_REC
     TABLES TEXTTAB RECEIVERS
      USING OHD.
ENDWHILE.
*- check last recipient in recipient list
IF RECEXTNAM <> SPACE.
    PERFORM INIT_REC TABLES RECEIVERS.
    READ TABLE RECEIVERS INDEX 1.
    RECEIVERS-RECEXTNAM = RECEXTNAM.
    MODIFY RECEIVERS INDEX 1.
    PERFORM SO_OBJECT_SEND_REC
     TABLES TEXTTAB RECEIVERS
      USING OHD.
ENDIF.
ENDFUNCTION.
      FORM SO_OBJECT_SEND_REC                                       *
FORM SO_OBJECT_SEND_REC
TABLES OBJCONT      STRUCTURE SOLI
        RECEIVERS    STRUCTURE SOOS1
USING   OBJECT_HD    STRUCTURE SOOD1.
DATA:   OID     LIKE SOODK,
          TO_ALL LIKE SONV-FLAG,
          OKEY    LIKE SWOTOBJID-OBJKEY.
CALL FUNCTION 'SO_OBJECT_SEND'
       EXPORTING
            EXTERN_ADDRESS             = 'X'
            OBJECT_HD_CHANGE           = OBJECT_HD
            OBJECT_TYPE                = 'RAW'
            OUTBOX_FLAG                = 'X'
            SENDER                     = SY-UNAME
       IMPORTING
            OBJECT_ID_NEW              = OID
            SENT_TO_ALL                = TO_ALL
            OFFICE_OBJECT_KEY          = OKEY
       TABLES
            OBJCONT                    = OBJCONT
            RECEIVERS                  = RECEIVERS
       EXCEPTIONS
            ACTIVE_USER_NOT_EXIST      = 1
            COMMUNICATION_FAILURE      = 2
            COMPONENT_NOT_AVAILABLE    = 3
            FOLDER_NOT_EXIST           = 4
            FOLDER_NO_AUTHORIZATION    = 5
            FORWARDER_NOT_EXIST        = 6
            NOTE_NOT_EXIST             = 7
            OBJECT_NOT_EXIST           = 8
            OBJECT_NOT_SENT            = 9
            OBJECT_NO_AUTHORIZATION    = 10
            OBJECT_TYPE_NOT_EXIST      = 11
            OPERATION_NO_AUTHORIZATION = 12
            OWNER_NOT_EXIST            = 13
            PARAMETER_ERROR            = 14
            SUBSTITUTE_NOT_ACTIVE      = 15
            SUBSTITUTE_NOT_DEFINED     = 16
            SYSTEM_FAILURE             = 17
            TOO_MUCH_RECEIVERS         = 18
            USER_NOT_EXIST             = 19
            X_ERROR                    = 20
            OTHERS                     = 21.
IF SY-SUBRC <> 0.
    RAISE OTHERS.
ENDIF.
ENDFORM.
      FORM INIT_REC                                                 *
FORM INIT_REC TABLES RECEIVERS STRUCTURE SOOS1.
CLEAR RECEIVERS.
REFRESH RECEIVERS.
MOVE SY-DATUM TO RECEIVERS-RCDAT .
MOVE SY-UZEIT TO RECEIVERS-RCTIM.
MOVE '1'       TO RECEIVERS-SNDPRI.
MOVE 'X'       TO RECEIVERS-SNDEX.
MOVE 'U-'      TO RECEIVERS-RECNAM.
MOVE 'U'       TO RECEIVERS-RECESC.
MOVE 'INT'     TO RECEIVERS-SNDART.
MOVE '5'       TO RECEIVERS-SORTCLASS.
APPEND RECEIVERS.
ENDFORM.
2.

How to send e-mail with an attachment from remote database server.???

Hi All,
I have tried the simple mail sending and with the attachment using UTL_SMTP. But the problem is , it is sending the mail with attachment of the file name i give, it takes and creates that file and sends as attachment not from the actual file location. I am trying to attach the file which i stored in remote database server.
The following code I tried. But not worked for attachment
DECLARE
   v_From       VARCHAR2(80) := '[email protected]';
   v_Recipient VARCHAR2(80) := '[email protected]';
   v_Subject    VARCHAR2(80) := 'test subject';
   v_Mail_Host VARCHAR2(30) := 'pop3.somedomain.com';
   v_Mail_Conn utl_smtp.Connection;
   crlf         VARCHAR2(2) := chr(13)||chr(10);
BEGIN
v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host, 25);
utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
utl_smtp.Mail(v_Mail_Conn, v_From);
utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
utl_smtp.Data(v_Mail_Conn,
    'Date: '   || to_char(sysdate, 'Dy, DD Mon YYYY hh24:mi:ss') || crlf ||
    'From: '   || v_From || crlf ||
    'Subject: '|| v_Subject || crlf ||
    'To: '     || v_Recipient || crlf ||
    'MIME-Version: 1.0'|| crlf ||     -- Use MIME mail standard
    'Content-Type: multipart/mixed;'|| crlf ||
    ' boundary="-----SECBOUND"'|| crlf ||
    crlf ||
    '-------SECBOUND'|| crlf ||
    'Content-Type: text/html;'|| crlf ||
    'Content-Transfer_Encoding: 7bit'|| crlf ||
    crlf ||
    'some message text'|| crlf ||     -- Message body
    'more message text'|| crlf ||
    crlf ||
    '-------SECBOUND'|| crlf ||
    'Content-Type: text/html;'|| crlf ||
    ' name="Fund Authorization report"'|| crlf ||
    'Content-Transfer_Encoding: 8bit'|| crlf ||
    'Content-Disposition: attachment;'|| crlf ||
    ' filename="/usr/tmp/Test.html"'|| crlf ||
    crlf ||
    'HTML Attachment'|| crlf ||     -- Content of attachment
    crlf ||
    '-------SECBOUND--'               -- End MIME mail
utl_smtp.Quit(v_mail_conn);
EXCEPTION
WHEN utl_smtp.Transient_Error OR utl_smtp.Permanent_Error then
    raise_application_error(-20000, 'Unable to send mail: '||sqlerrm);
END;How can I attach a file which is stored in database server and send it in a mail.
Please someone help me in this.
Thanks,
Alaka.

Try this code
Regards Salim.
CREATE OR REPLACE TRIGGER EmailOnServerErr AFTER SERVERERROR ON DATABASE
DECLARE
   mail_conn       UTL_SMTP.connection;
   crlf            VARCHAR2(2) := chr(13)||chr(10);
   msg             VARCHAR2(32760);
   sid_name        VARCHAR2(16);
   bdump_dest      VARCHAR2(128);
   smtp_relay      VARCHAR2(32) := 'MyMailRelay';
   recipient_address VARCHAR2(64) := '[email protected]';
   sender_address     VARCHAR2(64) := '[email protected]';
   mail_port       NUMBER := 25;
   log_file_handle UTL_FILE.FILE_TYPE;
   log_file_dir    VARCHAR2(256) := 'ERR_LOG_DIR';
   log_file_name   VARCHAR2(256) := 'OracleErrors.log';
   maxlinesize     NUMBER := 32767;
   session_rec     sys.v_$session%ROWTYPE;
   audit_rec       sys.dba_audit_trail%ROWTYPE;
   auditing        BOOLEAN;
   LinesOfSQL      BINARY_INTEGER;
   offending_sql   DBMS_STANDARD.ora_name_list_t;
   CURSOR bdump_cur IS
      SELECT TRIM(value)
      FROM v$parameter
      WHERE name = 'background_dump_dest'
   CURSOR sid_cur IS
      SELECT TRIM(instance_name)
      FROM v$instance
   CURSOR session_cur IS
      SELECT s.*
      FROM v$session s
      WHERE s.sid = dbms_support.mysid
   CURSOR audit_trail_cur(AUDSID IN NUMBER) IS
      SELECT *
      FROM dba_audit_trail
      WHERE sessionid = AUDSID
BEGIN
   IF (USER = 'SYSTEM' OR USER = 'SYS') THEN
      -- Ignore this error
      NULL;
   ELSIF IS_SERVERERROR (1034) THEN
      -- Ignore this error
      NULL;
   ELSE
      -- get the sid
      OPEN sid_cur;
      FETCH sid_cur INTO sid_name;
      CLOSE sid_cur;
      -- get the location of the alert log
      OPEN bdump_cur;
      FETCH bdump_cur INTO bdump_dest;
      CLOSE bdump_cur;
      -- get the session information
      OPEN session_cur;
      FETCH session_cur INTO session_rec;
      CLOSE session_cur;
      -- get the audit_trail information if it exists
      OPEN audit_trail_cur(session_rec.audsid);
      FETCH audit_trail_cur INTO audit_rec;
      auditing := audit_trail_cur%FOUND;
      CLOSE audit_trail_cur;
      IF session_rec.program = 'MyProgram.exe' THEN
         NULL; -- ignore actions from MyProgram - that's where I do maintenance
      ELSE
         -- compose the message
         msg := 'Subject: Oracle error '||' on '||sid_name||crlf;
         msg := msg||'To: '||recipient_address||crlf;
         msg := msg||'For more information see the alert log file located at:'||crlf;
         msg := msg||bdump_dest||'/alert_'||sid_name||'.log'||crlf;
         msg := msg||'or the error log file: $'||log_file_dir||'/'||log_file_name||crlf;
         msg := msg||'Error Time='||TO_CHAR(SYSDATE,'DD-Mon-YYYY HH24:MI:SS')||crlf;
         msg := msg||DBMS_UTILITY.FORMAT_CALL_STACK||crlf;
         LinesOfSQL := sql_txt(offending_sql);
         msg := msg||'Offending SQL is:'||crlf;
         FOR loop_counter IN offending_sql.FIRST..offending_sql.LAST
         LOOP
            msg := msg||offending_sql(loop_counter);
         END LOOP;
         msg := msg||crlf||'----- PL/SQL Error Stack -----'||crlf;
         msg := msg||DBMS_UTILITY.FORMAT_ERROR_STACK||crlf;
         msg := msg||'V$SESSION.SADDR='   ||session_rec.saddr   ||crlf;
         msg := msg||'V$SESSION.SID='     ||session_rec.sid     ||crlf;
         msg := msg||'V$SESSION.SERIAL#=' ||session_rec.serial# ||crlf;
         msg := msg||'V$SESSION.AUDSID=' ||session_rec.audsid ||crlf;
         msg := msg||'V$SESSION.PADDR='   ||session_rec.paddr   ||crlf;
         msg := msg||'V$SESSION.USER#='   ||session_rec.user#   ||crlf;
         msg := msg||'V$SESSION.USERNAME='||session_rec.username||crlf;
         msg := msg||'V$SESSION.COMMAND=' ||session_rec.command ||crlf;
         msg := msg||'V$SESSION.OWNERID=' ||session_rec.ownerid ||crlf;
         msg := msg||'V$SESSION.TADDR='   ||NVL(session_rec.taddr   ,'Null')||crlf;
         msg := msg||'V$SESSION.LOCKWAIT='||NVL(session_rec.lockwait,'Null')||crlf;
         msg := msg||'V$SESSION.STATUS=' ||NVL(session_rec.status ,'Null')||crlf;
         msg := msg||'V$SESSION.SERVER=' ||NVL(session_rec.server ,'Null')||crlf;
         msg := msg||'V$SESSION.SCHEMA#=' ||session_rec.schema#||crlf;
         msg := msg||'V$SESSION.SCHEMANAME=' ||NVL(session_rec.schemaname,'Null')||crlf;
         msg := msg||'V$SESSION.OSUSER='     ||NVL(session_rec.osuser    ,'Null')||crlf;
         msg := msg||'V$SESSION.PROCESS='    ||NVL(session_rec.process   ,'Null')||crlf;
         msg := msg||'V$SESSION.MACHINE='    ||NVL(session_rec.machine   ,'Null')||crlf;
         msg := msg||'V$SESSION.TERMINAL='   ||NVL(session_rec.terminal ,'Null')||crlf;
         msg := msg||'V$SESSION.PROGRAM='    ||NVL(session_rec.program   ,'Null')||crlf;
         msg := msg||'V$SESSION.TYPE='       ||NVL(session_rec.type      ,'Null')||crlf;
         msg := msg||'V$SESSION.SQL_ADDRESS='    ||session_rec.sql_address ||crlf;
         msg := msg||'V$SESSION.SQL_HASH_VALUE=' ||NVL(TO_CHAR(session_rec.sql_hash_value) ,'Null')||crlf;
         msg := msg||'V$SESSION.PREV_SQL_ADDR=' ||session_rec.prev_sql_addr||crlf;
         msg := msg||'V$SESSION.PREV_HASH_VALUE='||NVL(TO_CHAR(session_rec.prev_hash_value),'Null')||crlf;
         msg := msg||'V$SESSION.MODULE='     ||NVL(session_rec.module              ,'Null')||crlf;
         msg := msg||'V$SESSION.MODULE_HASH='||NVL(TO_CHAR(session_rec.module_hash),'Null')||crlf;
         msg := msg||'V$SESSION.ACTION='     ||NVL(session_rec.action              ,'Null')||crlf;
         msg := msg||'V$SESSION.ACTION_HASH='||NVL(TO_CHAR(session_rec.action_hash),'Null')||crlf;
         msg := msg||'V$SESSION.CLIENT_INFO='||NVL(session_rec.client_info         ,'Null')||crlf;
         msg := msg||'V$SESSION.FIXED_TABLE_SEQUENCE='||NVL(TO_CHAR(session_rec.fixed_table_sequence),'Null')||crlf;
         msg := msg||'V$SESSION.ROW_WAIT_OBJ#=' ||NVL(TO_CHAR(session_rec.row_wait_obj#) ,'Null')||crlf;
         msg := msg||'V$SESSION.ROW_WAIT_FILE#=' ||NVL(TO_CHAR(session_rec.row_wait_file#) ,'Null')||crlf;
         msg := msg||'V$SESSION.ROW_WAIT_BLOCK#='||NVL(TO_CHAR(session_rec.row_wait_block#),'Null')||crlf;
         msg := msg||'V$SESSION.ROW_WAIT_ROW#=' ||NVL(TO_CHAR(session_rec.row_wait_row#) ,'Null')||crlf;
         msg := msg||'V$SESSION.LOGON_TIME='     ||NVL(TO_CHAR(session_rec.logon_time,'DD-Mon-YYYY HH24:MI:SS'),'Null')||crlf;
         msg := msg||'V$SESSION.LAST_CALL_ET='   ||NVL(TO_CHAR(session_rec.last_call_et)   ,'Null')||crlf;
         msg := msg||'V$SESSION.PDML_ENABLED='   ||NVL(session_rec.pdml_enabled   ,'Null')||crlf;
         msg := msg||'V$SESSION.FAILOVER_TYPE=' ||NVL(session_rec.failover_type ,'Null')||crlf;
         msg := msg||'V$SESSION.FAILOVER_METHOD='||NVL(session_rec.failover_method,'Null')||crlf;
         msg := msg||'V$SESSION.FAILED_OVER='    ||NVL(session_rec.failed_over    ,'Null')||crlf;
         msg := msg||'V$SESSION.RESOURCE_CONSUMER_GROUP='||NVL(session_rec.resource_consumer_group,'Null')||crlf;
         msg := msg||'V$SESSION.PDML_STATUS='    ||NVL(session_rec.pdml_status    ,'Null')||crlf;
         msg := msg||'V$SESSION.PDDL_STATUS='    ||NVL(session_rec.pddl_status    ,'Null')||crlf;
         msg := msg||'V$SESSION.PQ_STATUS='      ||NVL(session_rec.pq_status      ,'Null')||crlf;
         IF auditing THEN
            msg := msg||'DBA_AUDIT_TRAIL.OS_USERNAME=' ||NVL(audit_rec.os_username,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.USERNAME='     ||NVL(audit_rec.username   ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.USERHOST='     ||NVL(audit_rec.userhost   ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.TERMINAL='     ||NVL(audit_rec.terminal   ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.TIMESTAMP='    ||TO_CHAR(audit_rec.timestamp,'DD-Mon-YYYY HH24:MI:SS')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.OWNER='        ||NVL(audit_rec.owner      ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.OBJ_NAME='     ||NVL(audit_rec.obj_name   ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.ACTION='       ||audit_rec.action   ||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.ACTION_NAME=' ||NVL(audit_rec.action_name   ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.NEW_OWNER='    ||NVL(audit_rec.new_owner     ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.NEW_NAME='     ||NVL(audit_rec.new_name      ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.OBJ_PRIVILEGE='||NVL(audit_rec.obj_privilege ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.SYS_PRIVILEGE='||NVL(audit_rec.sys_privilege ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.ADMIN_OPTION=' ||NVL(audit_rec.admin_option ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.GRANTEE='      ||NVL(audit_rec.grantee       ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.AUDIT_OPTION=' ||NVL(audit_rec.audit_option ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.SES_ACTIONS=' ||NVL(audit_rec.ses_actions   ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_TIME=' ||NVL(TO_CHAR(audit_rec.logoff_time) ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_LREAD=' ||NVL(TO_CHAR(audit_rec.logoff_lread) ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_PREAD=' ||NVL(TO_CHAR(audit_rec.logoff_pread) ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_LWRITE='||NVL(TO_CHAR(audit_rec.logoff_lwrite),'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.LOGOFF_DLOCK=' ||NVL(audit_rec.logoff_dlock ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.COMMENT_TEXT=' ||NVL(audit_rec.comment_text ,'Null')||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.SESSIONID='    ||audit_rec.sessionid   ||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.ENTRYID='      ||audit_rec.entryid     ||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.STATEMENTID=' ||audit_rec.statementid ||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.RETURNCODE='   ||audit_rec.returncode ||crlf;
            msg := msg||'DBA_AUDIT_TRAIL.PRIV_USED='    ||NVL(audit_rec.priv_used,'Null')||crlf;
         END IF;
         msg := msg||'-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-'||crlf||crlf;
         -- write the message to the error log file
         log_file_handle := UTL_FILE.FOPEN (log_file_dir, log_file_name, 'A',maxlinesize);
         UTL_FILE.PUT_LINE(log_file_handle,msg);
         UTL_FILE.FCLOSE(log_file_handle);
         -- send the message by Email
         mail_conn := UTL_SMTP.open_connection(smtp_relay, mail_port);
         UTL_SMTP.HELO(mail_conn, smtp_relay);
         UTL_SMTP.MAIL(mail_conn, sender_address);
         UTL_SMTP.RCPT(mail_conn, recipient_address);
         UTL_SMTP.DATA(mail_conn, msg);
         UTL_SMTP.QUIT(mail_conn);
      END IF; -- client_program = MyProgram.exe
   END IF;
END;
/

How to send delivery status by idoc format from EWM system?

Hi gurus,
You know we can send GR(posted) from EWM to R3 system, while in our scenario, we also need to send inbound delivery status( including posting, posted) from EWM to Non-SAP system via PI.
Can we implement that by idoc? Do we have to use PPF? How to develop in PPF to send message to PI?
Thanks in advance.

Hi kishore,
Thanks for your reply.
I tried to find how SPPFCADM send idoc in ther relevant method, but you know it's just some object oriented code which is not easy to understand and I couldn't find where send idoc and where can be enhanced.
I found that /SCWM/ERP_MAPOUT is the implementation name for the method of inbound delivery to ERP system, also there is an action "XI Message:lieferinfo:inbound delivery", can it be used to send idoc to PI/XI system?
Thanks.

How to send mail to vendor mail id from Tcode MIGO when GR is created

Hi Experts,
My requirement is to send one mail to vendor when GR is created in Tcode MIGO.
I tried to setup configuration in tcode NACE, creating new message type MAL1. but i am not able to locate Message tab in tcode MIGO, also, When i goto transaction MB02 i can give message type MAL1 in output types then mail is going to scot, but my main problem is as:
Output type MAL1 is not automacially trigerred from transaction MIGO (I need to go to MB02 and add output type in Messages)
Please help me to configure this. Again, i did configuration only in NACE and not any other tcode. So please tell me whether i need to configure in other tcodes specifcally WE20 (if yes, please give me message type and process code for GR) .
Many thanks, please help me. points assured!
Thanking you,
Jogdand M B

Hi,
Via t-code NACE select inventory management, then you can use output type WE01 or MLGR base on transmission medium -- 5 External send. After that you need to maintain the condition record accordingly, then that will be ok! After GR with MIGO, system will generate a email to vendor's mailbox in the vendor master data!
Good luck
Tao

How to send an attachment of a file from a procedure

Hi
How to send an email with an attachment of a file from a procedure

http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_mail.htm#sthref14875
http://asktom.oracle.com/pls/asktom/f?p=100:11:1400170679814652::::P11_QUESTION_ID:1739411218448
http://www.akadia.com/services/java_mail_plsql.html

HT4101 How do I import photos to my iPad from a Nikon s10. When I try, I get the message not enough power

How do I import photos to my iPad from a Nikon s10?

Does the Nikon use a SD card? if so, have you tried to simply pull the photos from the card?
If not, is your camera on when you try to transfer the files?
There may also be some settings on the camera to tweak.

How to send only one (of several) attachment from a receiver email adapter?

Hi all,
I have been working with the SAP XI email adapter for some time and now I encountered the following challenge:
I am receiving a message via email from a partner, call some modules which lead to the generation of 5 attachments in total for the incoming message.
I then map the MainDocument to a CONTRL message and return it to the sender using the dynamic parameters of both the sender and the receiver email cc.
I am filling these parameters inside the message mapping; so far I am not using the mailpackage xsd (the only things out of the ordinary are checked boxes for "use adapter specific parameters", "variable transport" and "keep attachments").
My problem is that the email receiver cc now generates an email with 5 attachments when I need it to add only the CONTRL (aka MainDocument) as attachment to this email.
Do you know if there is a way to tell the receiver cc to only use one attachment (or to remove attachments from the original message, f.ex. inside the message mapping)?
Thanks and cheers!
Stefan

Hi Stefan,
>>>>Do you know if there is a way to tell the receiver cc to only use one attachment (or to remove attachments from the original message, f.ex. inside the message mapping)?
1. It cannot be done in a mapping
2. have a look at mz blog
how simple it is to write an adapter that will do what you need
(just check the delete part of this blog):
/people/michal.krawczyk2/blog/2006/02/23/xi-dynamic-name-in-the-mail-attachment--pseudo-variable-substitution
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

How to send a do not reply response from Ironport

Our business Ironport appliances are set up with several domains.   We have a requirement to send a receipt message responding to certain customers who email an address on only one of the configured domains.    The receipt message needs to come from a [email protected] address and is to confirm that the email has been received.
So far I have a notfiication template configured with the message that we want to send out, and a content filter with a condition that uses Envelope recipient to identify the address that has been emailed, and a notify action that uses the notification template to send the message out.     The problem with this is that when the customer receives the email it comes from the address ironport@hostname.     The only way I can see of changing this is to change the Notifications option under the System Admin/Return Addresses option, however this is a global change that then changes the address for all notification for all domains and for messages from the appliance itself.      If we then have a future requirement to do the same thing for a different domain we're stuck.
Can anyone suggest another way of doing this just for one domain.    I've wondering about custom message filters/text resources but don't know how to work them.
thanks
Chris

Within the Notify action on the Filter itself, you can override the Sender information that would have been populated from the Return Addresses page. If you are using a Content Filter, this is set in the 'Return Path:' field. For Message Filters, you would set it in the 3rd set of quotes, for example:
notify("$EnvelopeSender", "template_name", "[email protected]");
The email address specified here is used as the Envelope Sender, and the From: & Reply-To: headers.
- Jackie

I changed nothing in my email account but can no longer send emails on my talktalk account and get the message, "authentication required." I am running Mavericks on my MacBook Pro. I can receive messages on talktalk. Can send

I changed nothing in my email account, talktalk.net, but can no longer send (server's response, "authentication required) No problem receiving, I am using Mavericks on my MacBookPro. No problem using Cloud, but I want to use my talktalk account as before the problem
I can send and receive using talktalk without any problems using my iPod and iPad.
I would be most grateful for help - in simple form, please, I am an 80 plus female Mac lover!

Hello Hazel139,
I found this in one of the similar post hope it helps you.
Level 6 (14,190 points)
X423424X
This helped meRe: Problem SENDING email Jun 17, 2012 1:40 PM (in response to Casanewton)
The error I see is you did not specify the proper authentication for the smtp server.
In the Mail preferences for the account, smtp popup, select Edit SMTP Server List. A sheet will drop down. Select Advanced tab on that sheet. You should, I assume, set the Authentication to password, and set the proper username and password. That's where the poper would be set if 587 is not the one you should be using. Maybe it is. I only bring it up since I see it trying to use port 587.
If you got this stuff already set correctly then I don't know. Mail has a problem in your setup. Maybe delete the account and recreate it from scratch.
https://discussions.apple.com/message/18670442#18670442

How to send message/traffic accross VME bus from NI's VME MXI-2 card So I can monitor messages via vmetro card?

Similar Messages

Maybe you are looking for