How to send pursuit to the LMS closing with the X of the Internet navigator to explorer?
I have a course published in captivate that this mounted in a LMS. When I close the course with button X (to close/to leave) of the bar of reproduction of captivate the shipment of data is effective (tracking ok). The problem is that following the version of the Internet navigator to explorer, many users directly close the session with the vane (x) of the navigator and not using the button of the bar of navigation of captivate, in this case how profit that acts the same as that button x of the bar of navigation of captivate, that is to say that when closing with the X of the navigator also records the data of pursuit in the LMS.
Thanks for the aid (they excuse if the message is not absolutely clear, but I do not dominate to much the English).
Joan Lisboa
Gerd,
I think a filter event for 'Panel close?' is more appropriate because you have the possibility to cancel the event or continue the event.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!
Similar Messages
-
How to send changes in the Database Table Periodically using Change Pointe
Hi,
How to send changes in the Database Table to the external system Periodically using Change Pointers.
Thanks & Regards,
Gopi.That depends on what table you are referring to.
-
Ready to print. Now, how to send this to the printer?
Hello Again,
The little program is 5.5 x 8 inch pages (letter size paper folded in half). They must to
print it in 4 pieces of paper letter size, put them together and then fold them in half, (staple it).
I am using 1/4 inches in bleed and I would like to have crops marks. Must to be PDF!
I have no idea how to send this to the printer. Any help?
Thanks a lot!!
JesusFirst, ask your printer.
Second, printers generally want unimposed PDF. IOW, export regular pages and let your printer arrange them the way they want it.
But definitely ask them first. And make sure you mention the bleed.
Ken Benson -
How to send messages to the specified user through sap
how to send messages to the specified user through sap
Hi Santosh,
try:
CALL FUNCTION 'TH_POPUP'
EXPORTING
CLIENT = SY-MANDT
USER = BNAME "User you want
MESSAGE = MSG "text you want
EXCEPTIONS
USER_NOT_FOUND = 1.
Regards, Dieter -
I was on the apple support site and typed my question in the small box at the bottom but couldn't figure out how to send it. The person at the other end couldn't read what I typed. I have a new OS10.8.4 and can't find "empty cache" when I'm ready to close Safari. How do I do this? Thanks
https://discussions.apple.com/thread/4448839
-
GWIA not sending mail to the internet
Let me start out saying that i have no experience with Novell products. I am a person starting a local business and in need for a email server. I have chosen GroupWise 8 for many different reasons. I have Windows Server 2003. GroupWise 8 has been deployed successfully. I am able to receive emails from the internet, but not send emails to the internet. I ether get a error 450 or 550 error. Thats all on the GWIA. I have made a route.cfg. I have no idea if I have the correct IP address of the domain I'm trying to send email to(E.G gmail.com) How could I find out the IP Address of a email domain so I could put in the route.cfg file? I tried doing the ping but no luck. I have everything setup correcly on the domain register side. So, could some please describe what those error codes above mean and how this problem could be fix. Any kind of help will be appreciated. Once again, i have not experience with GroupWise or Novell Products. I'm trying to train myself!
Originally Posted by konecnya
You have a lot mixed in there
- DNS timing out could be a part of the problem. You might want to review
what your DNS servers are, you might have one that is lame or dead and
should be removed
- remove your resolve.cfg for now
- When talking of MX records, try to keep it clear about which domain you
are talking about. For your problem we are only worried about you being
able to resolve the MX records of domains you are trying to send to.
- If both MX records for your domain point to the same host name, then
you'd be just as well off with just one entry.
- If you have a successful DNS resolution, then it is possible that you
are blocked sending out on the SMTP port. From a command line,
telnet gmail-smtp-in.l.google.com 25
if you are blocked, you will get a "Connect failed"
if you are not blocked, you should get either a connection refused, or it
will report something like
220 gmail-smtp-in.l.google.com Ready
if so, type EHLO to get a bit more, then type QUIT to disconnect.
Let us know what works and we'll take if from there.
Andy Konecny
Knowledge Partner (voluntary SysOp)
KonecnyConsulting.ca in Toronto
Andy's Profile: View Profile: konecnya - Novell Forums
Thanks for that! So I did what you told me with the Commend Prompt, and it came back as "Connect Failed". So I'm guessing that this is a ISP problem now? Am I correct? -
How do I connect to the internet with my new IPAD ?
How do I connect to the internet with myt new Ipad
See here for connecting to the Internet:
http://support.apple.com/kb/HT1695
If you have any problems there is troubleshooting advice here: http://www.apple.com/support/ipad/wifi/ -
How do i connect to the internet with my ipad?
how do i connect to the internet with my ipad?
Did you turn WiFi on in the Settings App? If WiFi is turned on, your iPad should be able to see any WiFi networks that you can connect to and you should be able to tap on one of those, enter a password if needed and then tap the join button.
I get the feeling that you know this and the problem needs further explanation so ... Can you explain in more detail? -
How do i connect to the internet with apple tv
how do i connect to the internet with apple tv
Ethernet cable from your router, or configure wifi in Settings.
-
i have the 1st iPad. Can it be updated to iOS 6.0.1? If not how to fix-when on the internet sometimes it will just stop and go to the apps screen.
svargaswp wrote:
i have the 1st iPad. Can it be updated to iOS 6.0.1? ...
No.
iOS 5.1.1 is the lastest for the iPad 1.
svargaswp wrote:
... how to fix-when on the internet sometimes it will just stop and go to the apps screen.
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Note:
Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..
If necessary...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414 -
I want to uninstall Acrobat reader. I got support in the community to access my HD and to send to trash the internet plugs in for PDF viewer, but when I try to download a PDF from internet a black screen appears and preview doesn't open
Back up all data.
Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
How can I print while the internet is disconnect​ed?
I have Pro 8600.
How can I print while the internet is disconnected for some reason?
My internet router is unstable recently.
thanks.Hi,
Your printer has these:
USB 2.0-compliant high speed
USB 2.0 high-speed host port
Wireless 802.11b/g/n*
Wired 802.3 network (Ethernet)
You can use USB or Ethernet connection to print. I always define USB as second printer and I can print direct.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
How to stream music from the Internet on airport express
How to stream music from the Internet on airport express
HACKINT0SH wrote:
Well... do you see the airplay button?
I tought Airplay is limited to stream music from Itunes to airport express.http://support.apple.com/kb/HT4437?viewlocale=nl_NL
I also want to upgrade my hifi setup with the airport. But with macbook of late 2009 (OSx Lion) I wonder it would be possible to stream music form internet.
On this forum, I could not find any guarantee that it might work with OSx ML.
What do you think? -
How does Imac connect to the internet?
How does Imac connects to the internet?
Through your ISP (internet service provider); once you set up an account with them, you can decide to connect via ethernet cable to their modem, or, if you have a router (which is connected to their modem, you can connect wirelessly.
Is that what you were wondering about or did I misunderstand your question? -
How can I turn off the Internet of providers
hello,
i heb a nokia x6
and How can I turn off the Internet of providers?
I only use my wifi
DeDragonMan
Solved!
Go to Solution.1. Call the Operator'e helpline to deactivate it ..
2. Go to Menu-->Settings-->Connectivity-->Destinations-->Internet ... select the Access Point ... Options-->Delete ..
Maybe you are looking for
-
How do I convert an existing account into a kids account?
I'm trying to set up family sharing. I wish my Son (11) to be able to apply to me for purchases, as a "kid." The account thinks he is an "Adult" and does not offer this opportunity. HOW do I get his iCloud account converted from an "Adult" account
-
My ipad2 was recently stolen. I have since purchased an iphone4. Is there a way to retreive the apps that I had on my ipad for use on my iphone or on a new ipad if purchased? Thx. Adam
-
Hello, I am deadly new in this, so I hope this is an easy to answer question ... I want to install an EJB application which runs on JBoss. Since JBoss don't need an application.xml file I wrote one and built an .ear file to deploy it into OC4J. Our a
-
Java docs for com.sap.aii.mappingtool.*
Hi , I was looking for the javadocs for com.sap.aii.mappingtool.* . Can anyonle let me knwo where can i find the docs for this . Thanks Nikhil
-
Accessing COM servers. Possible?
Does LabVIEW provide a block or set of blocks for loading COM servers and calling methods in the COM server? I'm writing the server code which LabVIEW will eventually need to interact with and I can either package my code as a COM server, or maybe in