How to set a dynamic filter to a prompted one?

Hello:
I have a dashboard prompt whose values determine the columns for a constructed dynamic filter column using case statement.
There is another dashboard prompt whose value determine the the values for the dynamic filter column.
I have a need to set this dynamic filter to the operator 'is prompted'. According to the OBIEE documentation, the requirement for 'is prompted' filter is to have the dashboard prompt column match with the filter column.
I currently use a presentation variable for the dashboard prompt column that gives the filter value.
How do I make my dynamic filter to be prompted (for pre-filtering results as a default behavior) and subsequently use the presentation variable (derived from the dashboard prompt) if a user enters the appropriate prompt values?
Here is an example:
Dashboard prompt: Location Type-> (State, District, City) (The case statement on my filter determines the appropriate logical column State or District or City)
Filter Value: Dallas (pv1)
The dynamic filter will generate "City" = '@{pv1}' (Dallas in the above example)
I want this dynamic filter to be set to 'is prompted' for pre-filtering results as a default behavior.
Thanks for reading this far and looking forward to your suggestions.
Regards
Sankar Bala

Please read this carefully, you may find what you are looking for:
Dynamic dashboard prompts and columns used in multifunctional report, full guided navigation
http://108obiee.blogspot.com/2009/08/dynamic-dashboard-prompts-and-columns.html
Or this one:
http://obiee101.blogspot.com/2009/04/obiee-dynamic-prompt-content.html
Regards
Goran
http://108obiee.blogspot.com

Similar Messages

How to set up Dynamic Variants for job which is based on Pay Period

Hi,
We need to set up dynamic variant for payroll interface. This interface is based on Pay periods and that is why we need to use different variant for each month. Letus know how to set up dynamic variant which will take care of Pay Periods

Hi, Thnx for reply.
We are not changing the control records, current period will be some old period in system.
payroll is not processed in SAP,

How to set a dynamic textfield?

How to set a dynamic textfield that can baseon the user input data to resize the textfield height and width? Beside, I would like to copy the MS word table into the Form textfeild with the original design, how to do that? Many thanks!

You need to check two things:
1- Make sure to check the "Allow Multiple Lines" under the object tab.
2- Check the Expand to Fit checkboxes under the layout tab.
Jasmin

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either.

I have an airport express and want to know how to set up two different wireless networks. One with 5GHZ and one with 2.4GHZ so different devices can connect to either. I have an iphone 4 that will not connect to 5ghz.
thank you!

Your AirPort Express is already providing two separate 2.4 GHz and 5 GHz bands, but each band is using the same wireless network name.
This is the default setup for the AirPort Express, which is recommended for most users. The theory here is that devices will automatically connect to the best quality signal based on their capabilities and distance in relation to the AirPort Express.
It is possible to assign a different name to the 5 GHz band, and then "point" devices at that network to connect. Some users swear by this option.....(I am not one of them).... but you might want to give it a try to see how it works for you.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Express
Click Edit in the smaller window that appears
Click the Wireless tab at the top of the next window
Click Wireless Options near the bottom of the next window
Enter a check mark next to 5 GHz Name.....which will automatically add "5 GHz" to the network name....so you can identify it
Click Save, then click Update and wait a full minute for the Express to restart
Now you will need to "point" your 5 GHz capable devices at the 5 GHz network name. 2.4 GHz devices will connect to your "other" network name.

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

Urvergessen wrote:
+You may have already done this, but do you have the first AirPort Express configured to "Allow this network to be extended"?+
Could not find that setting anywhere.
It's in AirPort Utility, AirPort panel, Wireless tab.
When I'm within the range of the base station I connect normally, but further away the connection drops despite the fact that the other Airport is very close and light is green. Interestingly, my PB Pro has signal almost everywhere in the house, but my iPhone and Mac Mini don't. Most likely just a hardware difference?
In AirPort Utility with the second Express, in the AirPort panel, Wireless tab, have you checked "Allow wireless clients"?
The second AP does show an IP address: 10.0.1.3.
With a "Configure IPv4" setting of "Using DHCP", that suggests that the second Express really is connecting to the first Express. In that case I have no other explanation of your your problem.

How to add a dynamic filter in query panel

I want to display the data in recent week, is it possible to add a dynamic filter in query panel?
eg. filter--> actionDate >= CurrentDate - 7
BO version: BOX I 3.1

We are still trying to get this filter to work. Can anybody give us an example of how it should look on the sensor?
The sensor filter that we would like to create should exclude any source IP, any source port to specific destination hosts on all destination ports (icmp has none) from capturing events and storing them in the event store on the sensor.
This is the filter that we have so far on the sensor. Whats the problem with it?
service event-action-rules rules0
filters edit icmp-w-echo-filter-sensor-sensor-0-D
signature-id-range 2100
subsignature-id-range 0-255
attacker-address-range 0.0.0.0-255.255.255.255
victim-address-range a.b.c.x,a.b.c.y
attacker-port-range 0-65535
victim-port-range 0-65535
risk-rating-range 0-100
no actions-to-remove
deny-attacker-percentage 100
filter-item-status Enabled
stop-on-match False
no user-comment
exit
filters move icmp-w-echo-filter-sensor-sensor-0-D begin
exit

Linksys WRT120N Router -- How to set to "Dynamic"?

I am having trouble getting my work computer to connect wireless to my home router. I was told it was because my work computer is set to "dynamic" and my home router is probably set to "static"... how to I set my home router (Linksys WRT120N) to "dynamic"? I'm Dumb Dora when it comes to this so specific step-by-step directions would be appreciated.

CA_Martie,
Have you confirmed the settings on your router?
Ensured DHCP is enabled
Have you configured your wireless network settings on the router?
SSID Name
N or G network (both?)
Security settings?
Can any other devices connect wirelessly?
1 x r7000 Nighthawk 1.0.3.24
3 x WNDR4500 v1 / v2
e4200 Rev 1 f/w 1.0.05
e3000 Rev 1 f/w 1.0.04
QNAP TS-219P-II 4TB
dns323 ext3 4TB
Roku N 1080p
Altigen ip-710 VOIP phone
Other Routers - Asus (just ok), DLink (junk), Netgear (Current Favorite) & ProSafe, wrt54g & G2
wvc54gca - Dumped this as it only support TKIP encryption & 54mbps

How to set up dynamic dns?

Hi everybody,
could anybody help me to set up Dynamic DNS in the Airport Extreme? I am using Airport Utility 5.5.3
I also have dlink dns service active
Thank You
Manolo Fernández

The following is the basic setup for DDNS on the AirPort using AirPort Utility v5x:
AirPort Utility > Select the base station > Manual Setup >AirPort > Base Station tab > Edit ...
Use dynamic global hostname (checked)
Hostname: <enter your DDNS service domain here>
User: <enter your DDNS user account name>
Password: <enter your DDNS user account password>
Click "Done."
AirPort Utility > Select the base station > Manual Setup > Disks > File Sharing tab > Share disks over the Internet with Bonjour (checked)

How to set the default value in dashboard prompt?

Hi there,
In my Dashboard prompt I'm getting values like:
Mar 2010
Apr 2010
May 2010
Jun 2010
How to set the default value to the current month (Jun 2010). I don't want to use "specific value". I want to use the "SQL Result" for populating the default value.
Appreciate your help

hi,
you can create a Repository variable current_month with the expression as
select to_char(trunc(sysdate),'Mon')from dual
and use this in the prompt "Default to" Server variable and use this repository variable.
hope this helps.
cheers,
vineeth

How to set a keyframe with setValueAtTime for only one axis?

Hi,
I´d like to set a keyframe for the layer´s scale, anchor point values but separately. Let´s say I want to add the following keyframes to a layer:
time: 0, value: 100, axis: X
time: 0.3, value: 10, axis: Y
time: 1, value: 110, axis: X
If I use setValueAtTime(time ,[x, y]) it always places a keyframe for both axis.
How can I set a keyframe with setValueAtTime for only one axis?
Regards,
Thomas

Dan, thanks for your fast reply. But the problem is a bit difficult to describe for a german like me
I´m try to convert given keyframes from another application. Let me visually show how it handles keyframes that are set on different axis at different times:
X: O---O---O
Y: ---O--O-O
You see when the user sets a keyframe and both axis were modified, both have a keyframe (see the last key). But if only one axis is transformed and the other not, there is only one keyframe. The problem that I try to solve is that AE is only able to set a keyframe for both axis at a given time. So if I set the 3 keyframes of the X axis first, the AE script will set keys on the Y axis simultaneously. That´s bad because it adds keyframe to the other axis where there is no value "cache". So if I would set all keyframes it would look like this:
X: O--•O-•-O
Y: •--O•-O-O
The small dots indicate those "forced" in-between keys.
So is there a "native" scripting way to separate the dimensions (like the position prop) for other props and add independent keyframes?

How to set a dynamic email destinator ...

Hi.
I've completed my mail scenario, adding an attachment as a CVS file.
Now i have two doubts. In my payload i have two fields. FILE and EMAIL.
I would like to use the email as the receiver of the email (message protocol : XIALL) and the FILE as the name of the attachment FILE.
I've done something similar but with file adapter, using 'Variable Substitution' but in Receiver mail adapter i haven't this option.
Any idea of how to do that?
Regards.

Hi ,
In the file adapter you can give the inputs for mail adapter destination . But if you want to give it dynamically check out the URL.
End of the doc.
http://help.sap.com/saphelp_nw04/helpdata/en/6b/4493404f673028e10000000a1550b0/content.htm
Regards
Vijaya

How to set the right filter mode?

Hi All,
I have a few applications deployed in Tomcat 5.5.9 for which i need to control access.
I have created a policy to which I have added a rule of type URL Policy Agent and added a few users as subjects.
Now that the policy is in place, I tried to change the filter.mode property in AMAgent.properties file to all the possible options and I have noticed the following:
filter.mode=NONE              Allows all users without authentication
filter.mode=SSO_ONLY          Allows all users after authentication against DS
filter.mode=URL_POLICY          Disallows authentic users also (HTTP 403 error)
filter.mode=J2EE_POLICY          Allows all users after authentication against DS
filter.mode=ALL                      Disallows authentic users also (HTTP 403 error)
In my case all the observations except the J2EE_POLICY option work as required.
I conclude this as a part of my understanding gained through the following:
http://docs.sun.com/source/816-6884-10/chapter3.html#wp21908
I have failed to understand why the J2EE_POLICY option allows users which are not included as subjects in the realm as authentic.
I have also tried setting the com.sun.am.policy.agents.do_sso_only=false property but dint get things working as needed.
Any help in this regard would be appreciated.
Regards,
Saiesh Nayak,
Persistent Systems.

J2ee_policy allows users which are not included as subjects in the realm because the policy agent actually doesn't validate the URL policies configured in AM, it just validate j2ee declarative security from your web application.
So, as I suspect, if you don't have security constraints in your webapp, you won't enforce security.
With URL_POLICY option, you will enable url policy evaluations as you configure it in Access Manager. So, in this case and in the ALL option case, check that the url policy is correctly configured, mainly the rule.
You can enable debug.level=message instead of debug.level=error in AMAgent.properties in order to see what's happening. When you enable message level debug, the agent will create some debug log files, please take a look on the amFilter and amWebPolicy log files.
Hope it helps.

How to set a dynamic variant for date in select-options in the upper field

Hi Variant experts Good Evening!
I have the following problem while setting up a dynamic varinat .
Ex: select-options: dat for sy-datum.
I am able to save the lower limit as a dynamic value but not able to save the upper values as dynamic in the select-options. Could any of you please help me in this.
Regards
Ravi.

i hope dynamic variant concept is not there,
but u can use the fn module DYPRO_GET_VALUES and
DYNPRO_SET_VALUES
DYNPRO_GET_VALUES gets the values in the screen,
DYNPRO_SET VALUES sets the values.
first get the values, compare and set the values as u want

How to set colspan dynamically in fo tables.

Hi,
I have an xml file which basically contains html tables. These table rows have attribute called colspan. I am converting this xml file to PDF using Apache FOP. For that I am using xsl. I am able to render everything correctly but I need to capture the colspan value and set the same value to fo table like this -
*<fo:table-cell padding="6pt" border="1pt solid blue" background-color="silver"* *{color:#0000ff}number-columns-spanned{color}="{color:#ff0000}3{color}"*>
Here, in place of the red 3 I want to have an xsl function which can fetch the html table's colspan value and set it here.
Any Ideas????
Thanx.

I got this working, thnx for your concerns.
Sanjeev.

How to set a dynamic validation message in javascript

Hi,
I am using the "validate" event on a field, along with the "script message" field, to make a validation and send a message to the user if the test fails.
- Is it possible to define parameters in this message, for example "field &1 is invalid" where we replace &1 by the name of a field?
- Is it possible to send 2 different messages (I guess it's like using a message &1)?
- What is the best practice according to your experience?
Notes:
- I am aware of the xfa.host.messageBox, but I'd like to keep Adobe logic for validations (am I wrong? why?)
- I also saw the possibility of binding a field from the context, to the message field, but I found that it was not very clean to do this way (if even possible)
Thx !

According to the tests I did since yesterday, it is very difficult to use the "validation script message" (in the "value" tab of a "text input" field, within a dynamic table), for sending a dynamic message.
I abandon, and prefer to use use
xfa.host.messageBox( "dynamic message text" )
For information, I could change the message during "validate" event, with a rather complex algorithm.
Unfortunately, when a table row is just added (dynamically, with a button), though the message has been changed, it displays the original value. When I change the field again, the changed validation message is taken into account. I don't know why.
Edited by: Sandra Rossi on Jul 24, 2009 9:01 AM : it's only to say that since then, this was the only solution! Question closed

How to set a dynamic filter to a prompted one?

Similar Messages

Maybe you are looking for