How to set autocommit false in Oracle Weblogic console?

Hi All,
While invoking the oracle Ebiz custom package from Oracle SOA 11g BPEL we are getting below error:-
java.sql.SQLSyntaxErrorException: ORA-02089: COMMIT is not allowed in a subordinate session.
Wondering if there is some properties through which we can set the autocommit false on the Oracle Weblogic Console.
Highly appreciate any pointers for the same.
Thanks in advance.

Yes I did set global transaction (XA) up in the db adapter. True, there are couple of commits in the API and from outside BPEL that works fine, the error i am getting when trying to access the API through BPEL. I am calling this only API from the BPEL.
Do you think there needs to setup explicit "autoCommit=false" somewhere in the weblogic console?

Similar Messages

How set autocommit=false with container transactions?

Hi all!
A'm using EJB's with transaction attribute=Container.
This is simple scenario:
call Session Bean
begin transaction
call EntityBean1 {
database update 1
call EntityBean2 {
database update 2
end transaction
return from session bean
The problem is:
when update2 fails update1 not rolling back.
A know, that solution of this problem is set AUTOCOMMIT=FALSE in Connection, but how do this with container transactions? Point me exactly to place, where this can be done, if this possible. Or may be no general solution (I.e. Each case demands it's own approach.)?
(I can't directly call method of Connection object because of transaction managed by container)
Tnx a lot.

Hi there,
I have the same problem with Orion and NuSphere MySql.
When I define a container-managed transaction, the autocommit mode is not changed.
I have a session bean for which I set the transaction attribute to REQUIRED and two entity beans for which the transaction attribute is SUPPORTS in the ejbjar.xml file.
The session beans calls the two entity beans and makes some modifications on them like for instance removing them from the database.
When I check whether a transaction can be rolled back, for instance by putting in my code a loop that never ends and then stopping the server, it seems my application is running in autocommit mode. No rollback is done.
This is very strange.
The two entity beans are stored using gemini tables which permit rollbacks. So when I start a transaction inside mySql using sql statements, I can do a rollback without problem.
Any idea of what's going wrong ?
Dimitri.

How to set the header variables in weblogic

Hi,
We have a following set up in our environment.
We have weblogic and on the top of it we have apex listener deployed which redirects Oracle Apex.
My Issue:
How can we set up the header variables in weblogic once the user is authenticated against weblogic server.
We are struck here, not knowing how to set the header variables in weblogic server. Its fairly straight forward for Oracle Access Manager or others..
Thanks
Ramesh P.

maybe you are looking for the routing options
http://docs.oracle.com/cd/E13159_01/osb/docs10gr3/userguide/modelingmessageflow.html#wp1125348

How to change autocommit property in Oracle 8.1.6 server

Can anybody tell me how to change autocommit property in Oracle 8.1.6 server?
Thanks in advance.
Matthew
null

Hi,
SET AUTOCOMMIT OFF
thanks,
Boby Jose Thekkanath,
Consultant,CWO,
NSW-AUS.

How to set lock level in Oracle

Does oracle have the similar way to set the lock level as SQL Server, say I have a statement in SQL server like:
update tablename with (rowlock) set....
How to convert it to an oracle statement

Update statement automatically places a row level lock, so no extra statements (and/or steps) may be necessary.
You could optionally do a SELECT ... FOR UPDATE ...
to explicitly lock the rows you are about to update.

How to set the language of oracle universal installer

Hi all,
I have downloaded oracle9i database release 2 Enterprise/standard/personal edition for windows. so I got the them into 3 different folders as said in the oracle site. I have few questions.
1.i have installed oracle using the universal installer, but my operating system is winxp german version.I want the installer to be in english so that i can easily navigate, how can i set the language. Does the installer automatically detects the OS and chosses the language.
2. I have 2 sql scripts. One with Schema(tables for database with create statements) and other file with data(insert statements).That is Schema.sql, data.sql. How can i use these scripts for querying using the installed database.
3. I am totally confused with SID, how to set it and what does it indicate(functionality).
4. The login for SQL PlUS, i used scott and tiger. Because i think the installer did not installled completely, i could not create my own username/password. What will be the host-string while logging to sqlplus.
Thanks and Regards
Babu.

1.i have installed oracle using the universal installer, but my operating system is winxp german version.I want the installer to be in english so that i can easily navigate, how can i set the language. Does the installer automatically detects the OS and chosses the language.From the control panel, regional setting, make default for English (United States) and English as default language. While installing oracle from OU, choose only english langauge.
2. I have 2 sql scripts. One with Schema(tables for database with create statements) and other file with data(insert statements).That is Schema.sql, data.sql. How can i use these scripts for querying using the installed database.Once you have installed oracle and create database, make sure the following and then run your scripts.
1. Check oracle services are started or not from the windows services. If yes, then do step 2, else, start services first and then do step 2.
2. set oracle_sid=your_database_name
3. sqlplus /nolog -- when you give this command, if you get reply that connected to idel instance, then, your database is not up, in this case, startup your database after step 4. (startup)
4. connect / as sysdba
5. run your script to create schema.
--once schem created. connec to your newly created schema.
6. connect username/password --
7. run the script (insert records)
3. I am totally confused with SID, how to set it and what does it indicate(functionality).ORACLE_SID is nothing bur your oracle database name. You will be asked to provide the database name while installing and creating oracle database.
4. The login for SQL PlUS, i used scott and tiger. Because i think the installer did not installled completely, i could not create my own username/password. What will be the host-string while logging to sqlplus.As long as you want to do it on the database server, then, you dont need tnsname. If you want to access database from other machines, then, you need to create a tnsname to connect.
Jaffar
OCP DBA

How to integrate Active Directory with Oracle Weblogic

hi
is there any Oracle Document that descripes how to integrate the LDAP Active directory with Oracle Weblogic 10.3
Regards
Edited by: qasas on 28-Nov-2009 13:56

weblogic docs (and there identity asserters) - http://one-size-doesnt-fit-all.blogspot.com/2008/12/configuring-wls-with-ms-active.html

How to integrate Java SSO with Oracle Weblogic

Hi,
I am new to Oracle weblogic, but i want to do something like below.
I want to use Oracle weblogic as application server and want to integrate Java SSO into it. I think we can do it using Oracle access manager but since OAM itself is massive drop this plan.
I think we can use OC4j Java SSO into Oracle weblogic, but don't knw whether it is feasible.
Can somebody please guide me solve this problem.
Any suggestion or comment is most appreciated.

weblogic docs (and there identity asserters) - http://one-size-doesnt-fit-all.blogspot.com/2008/12/configuring-wls-with-ms-active.html

How to divide equal load in Oracle Weblogic Cluster Node

Hello Friends..
I install Oracle weblogic 10.3.3.0 and oracle Forms [32 Bit] Version 11.1.1.3.0 (Production) on Two PC, PC-1 and PC-2.
I Create a cluster for load balancing and shifting the load from PC-1 to PC-2. Now I want to know which algorithm is best for equal load balance means i want to transfer equal load on both machine.
If PC-1 have 10 http request then next 10 request transfer to PC-2.
Please guide me.
Thanks,
Sachin

Hi Sachin
You need to have a load balancer or web server in front of your weblogic server cluster.
This is really a tunning excersise, so you need to try several options depending on the load of the enironment, however robin robin (default) should work for you.
You can see more details here:
Load Balancing in a Cluster
Best Regards
Luz

How to set render false for OALink Bean

Hi friends,
is it possible to set render false for OALinkBean.
i am using the following code but it is not working
OALinkBean LinkBean = (OALinkBean)webBean.findChildRecursive("subTabLinkThree");
if(projectType.equals("XYZ"))
LinkBean.setRendered(false);
}

previously i was using this code for hiding the subtablink but this code was not working
OALinkBean LinkBean = (OALinkBean)webBean.findChildRecursive("subTabLinkThree");
LinkBean.setRendered(false);
but now i am using following code and this code is working fine
OASubTabLayoutBean subTab = (OASubTabLayoutBean)webBean.findChildRecursive("subTabLayoutRN");
if(subTab != null)
subTab.hideSubTab(2,true);
}

How to set Spanish, ESN CP1252, , oracle Character Sets WE8MSWIN1252

select * from NLS_DATABASE_PARAMETERS
database characterset is
NLS_CHARACTERSET               AL32UTF8
NLS_NCHAR_CHARACTERSET         AL16UTF16
NLS_LANGUAGE                   AMERICAN
NLS_TERRITORY                  AMERICAselect * from NLS_INSTANCE_PARAMETERS ;
PARAMETER                         VALUE
NLS_LANGUAGE                      SPANISH
NLS_TERRITORY                     SPAINhow to set Spanish, ESN CP1252, , oracle Character Sets WE8MSWIN1252
Please suggest.
Thanks In advance

Is it really ok to convert AL32UTF8 to WE8MSWIN1252?
NLS_CHARACTERSET AL32UTF8
to
NLS_CHARACTERSET WE8MSWIN1252
please suggest

Cannot set node manager password in weblogic console (10.3.3)

Hi,
I've been trying to configure a custom AD authenticator in the weblogic console for 10.3.3 and get Invalid pad byte on the node manager password when it tries to activate my changes. After trying several things suggested in other forums, I went into the weblogic console, under domains->security, changed the node manager user and password, and still get an Invalid pad byte on the password I entered! Any suggestions?
Thanks!
Julia Allen

Well that didn't work :( . I went into config.xml and changed <node-manager-username> and <node-manager-password-encrypted> to clear text, restarted, went into the console and tried to change the node manager username and password in Domains-->Security-->Advanced and still got invalid pad byte on the password I entered when I saved. Interestingly enough when the page came up the value for node-manager-username was the old value... not the one I changed in config.xml before I started the server. I verified that I changed the correct config.xml. When I looked at it after restart, the values had not been changed to encrypted values. And, yes, production mode is false. So I'm guessing a cache problem somewhere? Or a corruption in one of the other security files that I cannot determine?
One thing I did try was to reset the admin password following steps I found in other places (e.g. renaming ldift/initialized/properties files, running java weblogic.security.utils.AdminAccount) but nothing. Still the same problem. Also note that the server starts just fine... the console just barfs with this invalid pad byte error whenever I try and configure that AD provider or actually try and change the node user name and password.
Any other ideas? Your help is greatly appreciated!
Julia

How To Integrate BPEL Process Into Oracle Weblogic Portal 10.3

Hi All,
I have bpel process which which has db adapters and Human Work Flow. I need to integrate this bpel process [ created using Oracle SOA Suite 10131] with Oralce weblogic portal 10.3
Please let me know how to achieve this.
Thanks,
Irfan Khan

Hi All,
I tried to call my BPEL Process thru JSP.
This is how my JSP looks like:
<%@ page language="java" contentType="text/html; charset=ISO-8859-1"
pageEncoding="ISO-8859-1"%>
<%@ page import = "com.oracle.bpel.client.Locator" %>
<%@ page import = "com.oracle.bpel.client.NormalizedMessage" %>
<%@ page import = "com.oracle.bpel.client.dispatch.IDeliveryService" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>InvokeHelloBPELProcess</title>
</head>
<body>
<%
String name = request.getParameter("name");
if(name == null) name = "HelloBPEL";
String xml = "<name xmlns=\"http://xmlns.oracle.com\">"+name+"</name>";
// Connect to the default BPEL domain using Locator
// Please set the password (bpel is initial password)
Locator locator = new Locator( "default", "welcome1" );
IDeliveryService deliveryService =
(IDeliveryService)locator.lookupService
(IDeliveryService.SERVICE_NAME);
//Construct the normalized messaged and send it to the oracle BPEL PM
NormalizedMessage nm = new NormalizedMessage();
System.out.println(" -=-=-=-=-=-=-= XML: "+ xml);
//attach the payload to the NormalizedMessage
nm.addPart("payload", xml);
//Post the message to the HelloBPEL process
deliveryService.post("HelloBPEL", "initiate", nm);
out.println("The BPEL process HelloBPEL initiated!!!");
%>
</body>
</html>
Now once i invoke this JSP page I am getting the 500 internal server error.
The error message is :
java.lang.Exception: Failed to create "ejb/collaxa/system/DeliveryBean" bean; exception reported is: "javax.naming.NameNotFoundException: While trying to lookup 'ejb.collaxa.system/DeliveryBean' didn't find subcontext 'collaxa'. Resolved 'ejb'; remaining name 'collaxa/system/DeliveryBean'
Here I have some doubts:
1) If xml payload that I am passing is correct?
2) In Locator, do I need to pass 'domain' along with 'password' as my password or it will always be "bpel". i.e.,
a) Locator locator = new Locator( "default", <password> );
OR
b) Locator locator = new Locator( "default", "bpel" );
Please let me know how to solve this error. I doubt that my xml payload constructed is wrong. could you tell me what is the correct xml payload for below BPEL process WSDL file:
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="useWebServiceBpelProcess"
targetNamespace="http://xmlns.oracle.com/useWebServiceBpelProcess"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:client="http://xmlns.oracle.com/useWebServiceBpelProcess"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/">
     
     <types>
          <schema xmlns="http://www.w3.org/2001/XMLSchema">
               <import namespace="http://xmlns.oracle.com/useWebServiceBpelProcess" schemaLocation="useWebServiceBpelProcess.xsd" />
          </schema>
     </types>
     
     <message name="useWebServiceBpelProcessRequestMessage">
          <part name="payload" element="client:useWebServiceBpelProcessProcessRequest"/>
     </message>
     <message name="useWebServiceBpelProcessResponseMessage">
          <part name="payload" element="client:useWebServiceBpelProcessProcessResponse"/>
     </message>
     
     
     <portType name="useWebServiceBpelProcess">
          <operation name="initiate">
               <input message="client:useWebServiceBpelProcessRequestMessage"/>
          </operation>
     </portType>
     
     <portType name="useWebServiceBpelProcessCallback">
          <operation name="onResult">
               <input message="client:useWebServiceBpelProcessResponseMessage"/>
          </operation>
     </portType>
     
     <plnk:partnerLinkType name="useWebServiceBpelProcess">
          <plnk:role name="useWebServiceBpelProcessProvider">
               <plnk:portType name="client:useWebServiceBpelProcess"/>
          </plnk:role>
          <plnk:role name="useWebServiceBpelProcessRequester">
               <plnk:portType name="client:useWebServiceBpelProcessCallback"/>
          </plnk:role>
     </plnk:partnerLinkType>
</definitions>

How to set Transaction isolation level in Weblogic 11g

How do I set the transaction isolation level in Weblogic?
Some references that I found suggest that I have to explicitely state the isolation level in the weblogic-ejb-jar.xml per ejb. If I am using EJB 3.0 why would I need to do that?
Can I set this up as a property in the JDBC datasource setup?
Other application servers like Websphere actually allows for this. Can this be done in Weblogic?
Currently I get the following message if I don't set the isolation level:
Transaction attribute: TX_NOT_SUPPORTED Isolation Level: No Isolation Level Set Tx Timeout: 30000
What seems to be happening is that one update of my transaction is getting rolled back and other consequent calls are failing due to foreign key issues due to the first rollback.
I think the issue is related to the isolation level or the transaction time out being too low.
Any ideas?
BTW: I am using openjpa and using a MS SQLServer. Not sure if that helps the discussion.
Thanks
Edited by: rrivera on Jun 2, 2010 9:18 AM

How do I set the transaction isolation level in Weblogic?
Some references that I found suggest that I have to explicitely state the isolation level in the weblogic-ejb-jar.xml per ejb. If I am using EJB 3.0 why would I need to do that?
Can I set this up as a property in the JDBC datasource setup?
Other application servers like Websphere actually allows for this. Can this be done in Weblogic?
Currently I get the following message if I don't set the isolation level:
Transaction attribute: TX_NOT_SUPPORTED Isolation Level: No Isolation Level Set Tx Timeout: 30000
What seems to be happening is that one update of my transaction is getting rolled back and other consequent calls are failing due to foreign key issues due to the first rollback.
I think the issue is related to the isolation level or the transaction time out being too low.
Any ideas?
BTW: I am using openjpa and using a MS SQLServer. Not sure if that helps the discussion.
Thanks
Edited by: rrivera on Jun 2, 2010 9:18 AM

How to set the environment for Oracle XE-database.

Hi,
I have a:- lsnrctl command not found,
And when I echo oracle host & path I got:-
[oracle@ddcdevws02 etc]$ echo $ORACLE_HOST
[oracle@ddcdevws02 etc]$ echo $PATH
/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/u02/oracle/bin
Now I know that my environment is not set, but could anyone please assist me how I can set the environmernt ??? I mean commands or detailed instruction step as to what needs to be set where & how, I mean the SID, port, Path ???, I am new to Linux as well as database .
When I see the listener process using this:- ps -ef | grep tnslsnr, this is the output:-
[oracle@ddcdevws02 ~]$ ps -ef | grep tnslsnr
oracle 14727 1 0 14:25 ? 00:00:00 /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin/tnslsnr LISTENER -inherit
oracle 22618 21569 0 15:59 pts/2 00:00:00 grep tnslsnr
So does this mean that my Oracle home is "/usr/lib/oracle/xe/app/oracle/product/10.2.0/" ???
Also In the host file under /etc/ directory I have these settings
127.0.0.1 localhost.localdomain localhost
10.201.60.21 ddcdevws02.hddev.healthdialog.com ddcdevws02
I don't know if this is correct or not ? But I doubt I could make any change in the host file, please suggest me.
Thanks
Sam

user8692703 wrote:
I am sorry Ed I reliazed that that was Phirir's suggestion to me, & Yes this is XE-Oracle database .... so the sid name would be "XE" ...?? I am sorry for my stupid questions as I am very new to ths .
I've never worked with XE, but from everything I've seen, that would also be your SID. check the contents of /etc/oratab
And then what other details required after I run this command ". oraenv", can I run this from any directory or some specific location ?
Just like any command, you can run it from anywhere as long as the directory is in your PATH.
But actually, you should be setting this in your profile, so that you just inherit it when you log on to the server. Depending on your OS, that would be either $HOME/.profile or $HOME/.bash_profile. Here are the commands you should have in that file:
export ORACLE_HOME=pathtoyouroraclehomedirectory
export ORACLE_SID=nameofyouroraclesid
export PATH=$ORACLE_HOME/bin:$PATH>
well I have this infor. with me
HTTP port ---> 8080
Port fopr Database ----> 1521
Anythin else required ?

How to set autocommit false in Oracle Weblogic console?

Similar Messages

Maybe you are looking for