How to set fnd_client_info.set_org_context in Discoverer report.

Hello,
I created a view for a Discoverer report, it is using a seeded view and we have 2 different org entity. I need to have same view used to pull the data from 2 different entity for this I need to set fnd_client_info.set_org_context to retriev the data.
I dont where to set fnd_client_info.set_org_context in discoverer repror, so as to enable users of both the entity to use this report.
Can anyone help in finding the resolution.
Thanks and Regards
Milind

Here is the link to that forum: Discoverer

Similar Messages

How to set serial no in jasper report

Hi friends,
I am using jasper report in my application. In the table has 4 fields like code,name,address,phone number. If i generate the report i need to display the serial number like1,2,3.... for each record. I don't know how to set. So please help me.

You may use query as
declare @itemcodes nvarchar(2000)
select @itemcodes = ''
select top 200 @itemcodes = @itemcodes +
case when
charindex( 'ItemCode: ' + coalesce(T1.ItemCode,'Service'), @itemcodes) = 0 then
'ItemCode: ' + coalesce(T1.ItemCode,'Service') + ' '
else
end
+ case when T5.IntrSerial is not null then
', ' +
coalesce(T5.IntrSerial, '')
else '' end
FROM dbo.OINV T0
INNER JOIN dbo.INV1 T1 ON T0.DocEntry = T1.DocEntry
LEFT JOIN SRI1 T4 ON T4.BaseType=13 and T4.BaseEntry=T0.Docentry and T4.ItemCode=T1.ItemCode
LEFT JOIN OSRI T5 ON T5.SysSerial=T4.SysSerial and T4.ItemCode=T5.ItemCode
order by T1.itemcode
print @itemcodes
or use stored procedure and inside stored procedure throug cursor fill tmp table and as return make select as you need.

How to set formula field in crystal report

Hello all,
I develope the code in C#.NET and use SAP B1 2004C. I have a problem with crystal report. I have in crystal report one unbound field. This field is string type. I need in my code change value of this field to another text ex. ("test").
I use this code:
FormulaFieldDefinitions crFormula;
            FormulaFieldDefinition crFormulafieldD1;
            crFormula = crReportDocument.DataDefinition.FormulaFields;
            //FormulaFieldDefinition test;
            //bool test = crFormula.IsReadOnly;
            string error = "";
            bool isCorrect = true;
            crFormulafieldD1 = crFormula[1];
            string ahoj = crFormulafieldD1.FormulaName;
            crFormulafieldD1.Text = " ""+OP.ToString()+"" ";
            isCorrect = crFormulafieldD1.Check(ref error);
            // Display the error message if the syntax is incorrect.
            //if (!isCorrect) MessageBox.Show(error);
The value of the field is set, but on the report isnt it. Why not. Can you help me. Send some sample.
Thanks

Hi
I've never tried to change a field of the report directly. Maybe it would solve the problem if you make a parameter field, which you can use in the formula.
You can set then the parameter field:               report.SetParameterValue("NameOfParam", valueOfParam);
Regards,
Martin

How to set printersettings for the crystal report viewer in SAP BI dynamically

Hello
I have set the URL method for my crystal report and with parameter passing as shown below, it was displaying the crystal report viewer by connecting to the SAP BI 4.0 server with this method.
http://cr:port/businessobjects/enterprise115/desktoplaunch/opendoc/openDocument.jsp?sDocName=CRLabelParam&sType=rpt&lsSnPrinted=0&lsSsTestProjectNr=1
This URL will be called from Web application by different users, i would like to set the printer settings differently for different users for this crystal report viewer how shall i need to set the printer options?
shall i need to set the printer settings programatically for each user. Please advise me how do i need to proceed.
Thanks & Regards,
Rajeswari.

There are no BI / CR APIs that would do this for you. The way I see it, you'll have to have your own print button and populate it with the correct printer information for each user as they request the report. Of course, alternatively, use the viewer printer button and get the users to choose the correct printer.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

How to set an application item when report column link is clicked?

I am trying to set the short name of a bread crumb entry when I drill into a detail from an interactive report page.
The master report has a column link with target = detail - "page in this application"
I can pass page items through the URL and they are set on the target page.
How can I set an application item before the target page is called?
Is there a way to set a process before the link is followed?

Kenneth,
I'm not totally sure that I understood the question but, it soounds like you want to set the value of some page items on the page that is opened when you click a link on a column in the master window. Is this right?
If so, you can achieve what you want by creating hidden page item(s) on the target page. In the master page, on which every column provides the link, go into Report Attributes, click on the link column and scroll down to the section labeled "Column Link" Within this section, set the link text to the current column value, e.g. #MASTER_REPORT_COLUMN_NAME_HERE#. Set the target to "Page in this Application" and pick the page number for the target window.
Underneath this you will see a section to set set the value for page items. If you click the flashlight, you can search for the hidden page item that you created above. Use the same value to set it as you did the link text, i.e. #MASTER_REPORT_COLUMN_NAME_HERE#. Do this and let APEX take care of passing the values on the URL.
On the child page, just set whatever control you want to dynamically pick up the value from the hidden field. For example, if you hidden field where named P4_CLEARER_NAME. You could set the title attribute to "Contact Information for &P4_CLEARER_NAME."
You need the preceeding "&" and terminating "." around the name of you hidden page item to do this.
-Joe

How to set the working directory for reports in linux

Hi All,
Can you anyone help me to set the working directory for oracle application server 10g reports? I am using RHEL4 and AS10g. Actually i want to run my reports from my define
working directory. How can I do this?
Thanks in advance
Arif

Hi,
your rep_srv.conf should look like something like
+<?xml version = '1.0' encoding = 'ISO-8859-1'?>+
+<!DOCTYPE server PUBLIC "-//Oracle Corp.//DTD Reports Server Configuration //EN" "file:D:\oracle\FRHome_1/reports/dtd/rwserverconf.dtd">+
+<server version="10.1.2.0.2">+
++
++
+<cache class="oracle.reports.cache.RWCache">+
+<property name="cacheSize" value="50"/>+
++
++
++
+</cache>+
+<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="3" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="90000" jvmOptions="-Xmx512M -Xss512K">+
++
++
++
+</engine>+
+...+
some more definitions
+..+
++
+<pluginParam name="xmlpds" type="file">xmlpds.conf</pluginParam>+
+<pluginParam name="jdbcpds" type="file">jdbcpds.conf</pluginParam>+
+<pluginParam name="textpds" type="file">textpds.conf</pluginParam>+
*<environment id="APP1">*
*+<envVariable name="REPORTS_PATH" value="/application1/reports"/>+*
*+</environment>+*
*+<environment id="APP2">+*
*+<envVariable name="REPORTS_PATH" value="/application2/reports"/>+*
+</environment>+
+</server>+
The environment ids you can choose yourself and you have to put them in there yourself too (here I put two environments for two different applications "1" and "2").
If you call a report from Forms, then you have to code something like
ADD_PARAMETER(p_list,'ENVID',TEXT_PARAMETER,'APP1');
Details depend on how you call your reports, my example is for using a parameter list and calling a report out of application1
Hope that helps.
Volker

How to set up the path for report in 10gAS?

I have a report which can be run in one folder A but not in the other folder B, both folder are included in the forms_path in default.env of AS. How can I set up the path for the report in AS so that the report server knows to look for the report in the folder B?

Hello,
If you don't specify the "full path name" for your reports, the file will be searched in the directories listed in REPORTS_PATH or in the directory specified in the property sourceDir
For more details :
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/envvars/envvar_reports_path.htm
and
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_conf.htm
Regards

How to set up the path for Report Server's output

I've had 9iAS on NT 4 platform with Service Pack 6.
By default, the Report Server's output goes to the
C:\Oracle\806\Bin
How can we change this setting ?
(in 6iserver.conf we don't have a variable for it.)
I'll appreciate any help.
Thanks.
Izabella.

Thanks for reply.
In my \Report60\Server\myrepsvr.ora I have :
cachedir="E:\Oracle\806\REPORT60\server\cache"
but when I call :
http://<host>:<port>/dev60cgi/Rwcgi60.exe?
report=myrep.rdf&destype=file&desformat=pdf
&paramform=no
the created pdf report doesn't go to the specified cashedir, but goes to the
C:\Oracle\806\Bin
How can I handle it ?
I'd like to see the pdf file in the cachedir,
not in Bin.
Izabella.

How to set Command Timeout in Crystal report while calling from C# code

I am using Crystal report XI R2. I am calling SQL server 2005 stored procedure as source in the report. I want the report should timeout from the website if the stored procedure doesn't return resultset after 5 minute. Could you please assist how should I chnage the below code to achieve that.
Code :
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using CrystalDecisions.CrystalReports.Design;
using CrystalDecisions.Shared;
using CrystalDecisions.Web;
using CrystalDecisions.CrystalReports.Engine;
namespace CrystalTest
    public partial class _Default : System.Web.UI.Page
        protected ReportDocument rd;
        protected CrystalReportViewer Crv;
        protected void Page_Load(object sender, EventArgs e)
            rd = new ReportDocument();
            rd.Load(Request.MapPath("FXRate.rpt"));
            SetDBLogonForReport(GetCrvConnectionInfo(), rd);
            ParameterFields crtParamFields;
            ParameterDiscreteValue crtParamDiscreteValue1;
            ParameterField crtParamField1;
            ParameterDiscreteValue crtParamDiscreteValue2;
            ParameterField crtParamField2;
            ParameterDiscreteValue crtParamDiscreteValue3;
            ParameterField crtParamField3;
            ParameterDiscreteValue crtParamDiscreteValue4;
            ParameterField crtParamField4;
            ParameterDiscreteValue crtParamDiscreteValue5;
            ParameterField crtParamField5;
            ParameterDiscreteValue crtParamDiscreteValue6;
            ParameterField crtParamField6;
            crtParamFields = new ParameterFields();
            crtParamDiscreteValue1 = new ParameterDiscreteValue();
            crtParamField1 = new ParameterField();
            crtParamDiscreteValue1.Value = "USD";
            crtParamField1.ParameterFieldName = "@BaseCurrCode";
            crtParamField1.CurrentValues.Add(crtParamDiscreteValue1);
            crtParamFields.Add(crtParamField1);
            crtParamDiscreteValue2 = new ParameterDiscreteValue();
            crtParamField2 = new ParameterField();
            crtParamDiscreteValue2.Value = "EUR";
            crtParamField2.ParameterFieldName = "@CounterCurrCode";
            crtParamField2.CurrentValues.Add(crtParamDiscreteValue2);
            crtParamFields.Add(crtParamField2);
            crtParamDiscreteValue3 = new ParameterDiscreteValue();
            crtParamField3 = new ParameterField();
            crtParamDiscreteValue3.Value = "2008-05-28 00:00:00";
            crtParamField3.ParameterFieldName = "@FromDate";
            crtParamField3.CurrentValues.Add(crtParamDiscreteValue3);
            crtParamFields.Add(crtParamField3);
            crtParamDiscreteValue4 = new ParameterDiscreteValue();
            crtParamField4 = new ParameterField();
            crtParamDiscreteValue4.Value = "2008-05-28 00:00:00";
            crtParamField4.ParameterFieldName = "@ToDate";
            crtParamField4.CurrentValues.Add(crtParamDiscreteValue4);
            crtParamFields.Add(crtParamField4);
            crtParamDiscreteValue5 = new ParameterDiscreteValue();
            crtParamField5 = new ParameterField();
            crtParamDiscreteValue5.Value = "ashok12";
            crtParamField5.ParameterFieldName = "@CurrentUser";
            crtParamField5.CurrentValues.Add(crtParamDiscreteValue5);
            crtParamFields.Add(crtParamField5);
            crtParamDiscreteValue6 = new ParameterDiscreteValue();
            crtParamField6 = new ParameterField();
            crtParamDiscreteValue6.Value = DateTime.Now.ToString("dd MMM yyyy hh:mm");
            crtParamField6.ParameterFieldName = "@ClientTime";
            crtParamField6.CurrentValues.Add(crtParamDiscreteValue6);
            crtParamFields.Add(crtParamField6);
            Crv.ParameterFieldInfo = crtParamFields;
            Crv.DisplayGroupTree = false;
            Crv.BestFitPage = true;
            Crv.ReportSource = rd;
        private void SetDBLogonForReport(ConnectionInfo connectionInfo, ReportDocument reportDocument)
            Tables tables = reportDocument.Database.Tables;
            foreach (CrystalDecisions.CrystalReports.Engine.Table table in tables)
                TableLogOnInfo tableLogonInfo = table.LogOnInfo;
                tableLogonInfo.ConnectionInfo = connectionInfo;
                table.ApplyLogOnInfo(tableLogonInfo);
        public static CrystalDecisions.Shared.ConnectionInfo GetCrvConnectionInfo()
            CrystalDecisions.Shared.ConnectionInfo con = new CrystalDecisions.Shared.ConnectionInfo();
            con.ServerName = System.Configuration.ConfigurationSettings.AppSettings["conServer"].ToString();
            con.DatabaseName = System.Configuration.ConfigurationSettings.AppSettings["conDatabase"].ToString();
            con.UserID = System.Configuration.ConfigurationSettings.AppSettings["sesUser"].ToString();
            con.Password = System.Configuration.ConfigurationSettings.AppSettings["sesPwd"].ToString();
            return con;
        private void Page_Unload(object sender, System.EventArgs e)
            if (rd != null)
                rd.Close();
                rd.Dispose();
            if (Crv != null)
                Crv.HasCrystalLogo = false;
                Crv.Dispose();

Yes it is possible to use datasets. resources listed below. One hting to be aware of; Using datasets larger than about 5,000 records (depending on the report) is not advisable. Performance will potentially be an issue with datasets that are too large.
Crystal Reports Guide To ADO.NET
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/401c4455-a31d-2b10-ae96-fa57af5aec20
Reporting Off ADO.NET Datasets
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2091d0c3-da1d-2b10-22be-a3426b183f75
VS2005_Walkthroughs
http://www.businessobjects.com/global/pdf/dev_zone/VS2005_Walkthroughs.pdf
VB samples:
https://smpdl.sap-ag.de/~sapidp/012002523100006252822008E/net_win_smpl.exe
In the above samples see VBNET_WIN_ADODOTNET
C# samples
https://smpdl.sap-ag.de/~sapidp/012002523100006252722008E/csharp_win_smpl.exe
BTW., notes databse is here:
https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_ossnotes&query=&adv=true
Articles can be searched here;
https://www.sdn.sap.com/irj/sdn/businessobjects-articles
Ludek
Edited by: Ludek Uher on Feb 17, 2009 1:22 PM

How to set page setup in ssrs report level

Hi All,
Can any one suggest pls.
I have a SSRS report which has 50 column data.
When i am exporting it to PDF its giving me 20 pages.How can i make it in 2-3 page max.
Please suggest and also when i am exporting to excel it looks fine but when printing it its giving me two page.How can it fit to 1 page in excel
pls help.

Hi i_pr,
In SQL Server Reporting Services (SSRS), it is designed to use 2 different rules in pagination: Physical pagination and Logical pagination. Physical pagination is used to the print control and the TIFF and PDF rendering extensions. It is controlled by the
PageSize properties.
If we want to use 2-3 pages to display these data, we can modify the PageSize to work around the issue. However, if we print the report, it maybe truncated. Because the limit of print paper. Did you get the extra blank page when you export report to PDF?
If so, please refer to the following thread to reduce the pages.
http://blogs.msdn.com/b/chrisbal/archive/2006/08/10/694892.aspx
In SSRS, if we have no page break in the report, we will get these data in one page when we export the report to Excel. The print layout is relate to paper size. Alternatively, we can adjust the report in Excel to work around the issue.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support

How Complicated is it to move discoverer reports to OBIEE

I need to use the HR Intelligence reports in OBIEE. Can any one tell me how complicated will it be to do that?

Hi Sheryl
Indeed what you likely want is some form of source control. And certainly, splitting the project up and making different folks "captain of their own ship", is one way to roll.
But it sounds like you may have either misunderstood or had the RoboSource control misconfigured. With any source control system, the way it usually works is by storing all the content on the server in the source control database. But for each client connecting to the database, you establish what is called a "Working Folder". And that is usually on each local PC. When you check files out, they are copied to the working folder. So you work locally, but the application handles copying them back and forth to and from the server as you work. That way, you shouldn't be seeing performance issues.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How to set the filter on a report to show the data for the Current Month

Hi all,
I am working on a report, which currently has this filter: Date First Worked is greater than or equal to 10/01/2010. This reports show the data for the current month, so at the beginning of each month we have to remember to change the date on the filter.
Does anyone know what the criteria should say, so that it automatically changes and shows the information for the current month, without us having to go in and change anything?
Any help would be greatly appreciated!
Thanks,
AA

You need to add a session variable to date fir worked assuming that this is a date field.
To do this open up the filter on the field then at then press add Variable then "session" and enter the following CURRENT_MONTH into the Server Variable section.

How to set Excel Options using crystal reports 2008

Hi,
I am trying to figure out CR 8.5 (Crystal report control) Equivalents in Crystal reports 2008 using crystal report viewer in .Net but not able to find the exact replacments.
Properties used in CR 8.5
CRAXDRT.ExportOptions.ExcelUseWorksheetFunctions=True
CRAXDRT.ExportOptions.ExcelUseTabularFormat =True
CRAXDRT.ExportOptions.SetLogOnInfo(1,3,4,5)
Please let me know the replacements for the above mentioned properties in .Net using crystal report viewer (CR 2008)
Thanks in Advance
Regards,
Ramnath

Hello,
The code that has been provided is of Report Designer Component.
RDC has been deprecated in Crystal Reports 2008.
Use the 'ExcelFormatOptions' class. It provides many options regarding exporting in an excel format.
ExcelFormatOptions myExportFormatOptions = new ExcelFormatOptions();
Try exploring the Developer guide for Crystal Reports .NET SDK [here|http://www.sdn.sap.com/irj/boc/sdklibrary#section7]..

How to set relative position in Crystal Reports

Hi
We are using CR XI R2 for designing crystal reports and Oracle 9i as datasource.
we have placed 5 columns in vertical position next to one another in details section.
for ex
Salesrevenue
Company description
SalesSummary
as data fetch is dynamic whenver data in 'Sales revenue' is more it is overlapping on 'Company description' column
and so on with 'Sales summary' too.
I know that Relative postion works only when columns are placed in ROW MANNER i.e
Salesrevenue||Company description||SalesSummary but doesn't work when placed in the above manner.
Please let me know if there is any workround or any other option need to be configured to overcome this issue.
Thanks in Advance,
BSR

Right click the report navigator(left of your report body under design mode), and then choose 'insert a new section below', this will insert a new detail section called 'details b', put the 'Company description' into that section and third one into another new detail section.
This will let you avoid the overlap issue.
Thx, Hao

How to order the Discoverer reports through MENU function sequence

I created 20 Discoverer reports functions in the MENU form, there is a sequence column,
but when the 20 Discoverer reports displayed on OSO, they are not ordered by the sequence number, looks like just randomly listed. How can I make the 20 Discoverer Reports ordered by the sequence number when displayed on OSO?

Hi ram,
There are steps to register in oracle applications so there wont be any login poped up.Below is the link in that viewer and plus acces with e-business suite
http://ascbi.com/thirdparty_documents.htm_
hope it helps you,award points.
By,
KK

How to set fnd_client_info.set_org_context in Discoverer report.

Similar Messages

Maybe you are looking for