How to set material standard price to zero
Hi,
I am facing a problem relating to standard price of material. The material price control indicator is S. The standard price of that material is 300/-. I need to change 300/- to zero. How can i do that?
Pl. advise. I will assign the points for the answer.
Bye
Is this a purchased part?
does the material have a cost estimate?
The price control is "S" ??
Similar Messages
-
How to get Material standard price: MBEW-STPRS?
Hi BW experts,
I am wondering what is the best way to extract data for <u>material standard price</u> in Material master data - Accounting view (<b>MBEW-STPRS</b>)?
I checked existing extractors for material master, but I didin't find one which could be used.
Any help and feedback will be awarded.
Thanks and regards.
SallyHi Sally,
Check if 0CO_PC_ACT_05 helps here.
http://help.sap.com/saphelp_nw04/helpdata/en/22/1b383fdb800804e10000000a114084/content.htm -
How to set 'Material Master' tab as default in standard transaction CG54?
Hi All
I am having a requirement to call the transaction CG54 from a custom program. On calling the transaction, I need to put some default values to the input fields and the default tab selected should be 'Material Master'. I am able to default input fields using BDC Transaction call. Can anybody guide me how to set Material Master tab as the default tab selected?
Thanks in advance
Rinzy Deena MathewsHi All
Solved the issue by myself.
Initialization of tab in transaction CG54 is based on the values in the standard table TCGSGP - EHS: Search parameter (reproduction from SET/GET memory).
Calling of the transaction CG54, with default values and parameters can be done with the help of following standard function module:
*-- Types
TYPES : BEGIN OF t_obj_tab.
INCLUDE STRUCTURE rcgapplobj.
TYPES : END OF t_obj_tab.
TYPES : tt_obj_tab TYPE t_obj_tab OCCURS 20.
TYPES: BEGIN OF t_zplm02,
sbgvid TYPE zppr_de_sbgvid,
END OF t_zplm02.
*-- Internal Tables
DATA: li_obj_tab TYPE tt_obj_tab WITH HEADER LINE,
li_report LIKE rcgstdrecn OCCURS 20 WITH HEADER LINE,
li_variant LIKE rcgstdrecn OCCURS 20 WITH HEADER LINE,
li_subid_tab TYPE espre_subid_rep_tab_type WITH HEADER LINE,
li_report_m LIKE rcgstdrecn OCCURS 20 WITH HEADER LINE,
li_variant_m LIKE rcgstdrecn OCCURS 20 WITH HEADER LINE,
li_subid_tab_m TYPE espre_subid_rep_tab_type WITH HEADER LINE,
li_zplm02 TYPE STANDARD TABLE OF t_zplm02.
*-- Structures
DATA: ls_addinf TYPE rcgaddinf,
ls_rcgradmsel TYPE rcgradmsel,
lw_zplm02 TYPE t_zplm02.
*-- Variables
DATA: lv_trtype TYPE rcgdialctr-trtype VALUE 'D',
lv_actype TYPE rcgdialctr-actype VALUE 'D',
lv_viewappl TYPE tcgl3-repappl VALUE 'MATMASTER',
lv_sel_valdat TYPE rcgradmsel-valdat,
lv_sel_langu TYPE rcgradmsel-langu,
lv_ucomm TYPE syucomm,
lw_gen TYPE char10,
lv_flag TYPE esp1_boolean,
lv_werks TYPE werks_d,
lv_bsbgvid TYPE zppr_de_bsbgvid.
*-- Parameters
ls_addinf-aennr = sy-datum.
ls_addinf-valdat = sy-datum.
ls_rcgradmsel-sbgvid = iw_gen.
ls_rcgradmsel-matnr = p_matnr.
ls_rcgradmsel-namcat = 'MATNR'.
ls_rcgradmsel-reprefflg = abap_true.
ls_rcgradmsel-numcat = 'NUM'.
*-- Application Object
li_obj_tab-repappl = 'MATMASTER'.
li_obj_tab-objectkey = p_matnr.
APPEND li_obj_tab.
*-- Evaluate selection screen and fill keytab
CALL FUNCTION 'C1G0_KEYTAB_FILL_FROM_RADMSEL'
EXPORTING
i_radmsel = ls_rcgradmsel
i_valdat = ls_addinf-valdat
i_actype = lv_actype
i_flg_popup_no_param = abap_true
IMPORTING
e_flg_cancel = lv_flag
TABLES
i_applobj_tab = li_obj_tab
e_keytab_report = li_report
e_keytab_variant = li_variant
e_subid_refreport_tab = li_subid_tab
EXCEPTIONS
OTHERS = 1.
*-- Initilize Report Header Buffer
CALL FUNCTION 'C1AP_ESTDH_BUF_INIT'
EXPORTING
i_aennr = ls_addinf-aennr
i_valdat = ls_addinf-valdat.
*-- Parameters
ls_addinf-aennr = sy-datum.
ls_addinf-valdat = sy-datum.
ls_rcgradmsel-sbgvid = iw_gen.
ls_rcgradmsel-matnr = p_matnr.
ls_rcgradmsel-namcat = 'MATNR'.
ls_rcgradmsel-reprefflg = abap_true.
ls_rcgradmsel-numcat = 'NUM'.
*-- Application Object
li_obj_tab-repappl = 'MATMASTER'.
li_obj_tab-objectkey = p_matnr.
APPEND li_obj_tab.
*-- Initial report block tree of information
CALL FUNCTION 'C1G2_ENTRY_INQUIERY'
EXPORTING
i_trtype = lv_trtype
i_actype = lv_actype
i_addinf = ls_addinf
i_viewappl = lv_viewappl
i_sel_valdat = lv_sel_valdat
i_sel_langu = lv_sel_langu
i_rcgradmsel = ls_rcgradmsel
IMPORTING
e_okcode = lv_ucomm
TABLES
i_keytab_report = li_report
i_keytab_variant = li_variant
i_subid_refreport_tab = li_subid_tab
i_applobj_tab = li_obj_tab.
With Regards
Rinzy Deena Mathews. -
How to enable the standard price in the accounting -1 view of material mast
Hi,
When i was trying to create a material of material Type: FERT, Iam unable to enter the price of the material in the accounting -1 view-> standard price.
The field has been disabled.
So please tell me how to enable the standard price.
Regards,
Rudra Prakash. Shi
go to OMS2 double click FERT
in valuation check which price control is allowed
it should be std. price
go to OMSR check MBEW-STPRS note field group
in OMS9 for this group and material combination check whether that field is maintained as display
Vishal... -
Report on difference between PO price and Material standard price
Hi,
We need a report on Purchase price difference, which is report showing Open PO price & Material standard price, if there is a price difference
This need to be run every day to avoid buyer changing price at PO level unless there is a valid reason
Similarly difference if any between Schedule agreement price & Material master standard price
Please helpHi,
There is no standard report available for this.
You need to develop one.
Considering your requirement, it can be achieved with a query as well provided you do not need complex functionality out of the report.
Hope this helps. -
A Function or BAPI to get Material Standard Price?
Hi All,
I need a Function or BAPI to get the Material Standard Price when the following Criteria is given;
1. Material Code
2. Plant
3. Period
4. Year
5. Company Currency (Optional)
I need only the Standard Price and Price Unit. Please give me a example with sample values.
Thanks,
KishanSri:
I need only the Standard Price and Price Unit
there is no specific FM for that.
you need to write small select query in FM than use this custom FM into your program.
Amit. -
Abap function module for material standard price.
Dear Team,
Can anyone tell me the abap function module for getting material standard price respective of date and material code as input.
I have observe table MBEW, where we will get standard price of a material for last change date. Not getting any table where price is coming out wrt of Date for a same material.
Thx in advance
Rgds
sp
kolkataHI.
FM MSR1_MD_MATPRICE_GETLIST should help.u.
Regd,
AS -
How to set Material Ledger as Productive
In CKM9 ---> I am getting message as --> Material Ledger Not Yet Productive
how to set Material Ledger as Productive
Please helpIMG->Controlling->Product Cost Controlling->Actual Costing/Material Ledger-> Activate Valuation Areas for Material Ledger
In this step, you activate the material ledger for valuation areas - Before activating material ledger, check the additional currencies defined in the Co Cd. -
Material Standard Price update.
I've been trying to update a material standard price via BAPI_MATERIAL_SAVEDATA or MY_MATERIAL_PRICE_UPDATE, with no success.
I've followed the example code give in the thread /message/9187089#9187089 [original link is broken].
Has anyone gotten this to work?Sure.
Costing Type (OKKI) : 01 Standard Cost estimate (material), in this Price update: Standard price & Valuation View: Legal valuation.
Valuation variant components:
001: Planned valuation Materials: priority 1. Price frm purchasing info records, 2. Valuation price according to price control in material master 3.Valuation price with user Exit.
007: Production Order Actual: priority 1. Valuation price according to price control in material master.
Edited by: KMadhumati on Aug 12, 2009 9:44 AM -
Report displaying Material Standard Price and PO Price
Hello Experts
We have materials which are purchased. Price control is maintained as standard price and standard price is maintained using T Code MR21 periodically.
Due to this when PO price is different from standard price maintained in material master (usually PO price is higher than standard price) all price difference are posted to price difference GL at the time of GR.
Now users want to check variations between standard price and PO price for the material receipts.
Can anyone suggest me any report which provides details of standard price and PO price for the material receipts?
Thanks in advance for your help.
Satya AlapatiNothing std I'm aware of either. You could consider using the messages 06 205/6/7 to get a warning at the time POs are created that price varies significantly from std.
Config help text below:
Set Tolerance Limits for Price Variance
In this step, you define the tolerance limits for price variances.
When processing a purchase order, the system checks whether the effective price of a PO item shows variances compared with the valuation price stored in the material master record. In addition, it checks whether the specified cash discount value is admissible.
Variances are allowed within the framework of tolerance limits. If a variance exceeds a tolerance limit, the system issues a warning or error message.
In the SAP System, the types of variance are represented by the tolerance keys. For each tolerance key, you can define percentage and value-dependent upper and lower limits per company code.
Standard settings
The standard SAP System supplied contains the following tolerance keys:
PE Price variance, Purchasing
Tolerance limit for system message no. 207. This message appears if the specified effective price exceeds the predefined tolerances when compared with the material price.
SE Maximum cash discount deduction, Purchasing
Tolerance limit for system message no. 231. This is a warning message, which appears when the specified cash discount percentage exceeds the predefined tolerances.
Note
You can specify whether the system message appears as a warning or error message using the menu options Environment -> Define Attributes of System Messages.
Activities
Maintain the tolerance limits for each tolerance key per company code.
Regards,
Nick -
Material standard price change!
I am trying to do a standard price change for a material using the message type 'materialvaluation_pricechang'
I configured the distribution model view and partner profiles for R/3 and XI.
When I tried to create an IDOC with test tool we19, it got created with status 51 (application doc not posted)
I got the following error. But in config I didn't see the step 'setup sending material prices'. I am working on SAP ECC 5.0.
The error description is as follows.
<b>No Customizing data for valuation area 0013 found
Message no. CKMLSENDPRICE701
Diagnosis
The Customizing data for sending material prices to valuation area 0013 was not found.
System response
No price changes were made
Procedure
Edit the Customizing data for valuation area 0013 under Materials Management -> Valuation and Account Assignment -> Set Up Sending Material Prices</b>
Please suggest.
Thanks,Please find the code below in <b>bold</b>. I am trying to change the standard price of the material. Hence ls_ckmlcr-vprsv = 'S'. This is why the following lines in the below code never executes
<b>ls_matpr_cr-newpvprs = l_price.</b>
<b>ls_matpr_cr-newpvprs = ls_ckmlcr-pvprs.</b>
And hence the below condition fails.
IF ls_matpr_cr-newpeinh = ls_matpr_cr-peinh AND
ls_matpr_cr-newstprs = ls_matpr_cr-stprs AND
<b>ls_matpr_cr-newpvprs = ls_matpr_cr-pvprs.</b>
l_nochange = 'X'.
ENDIF.
<b>ls_matpr_cr-newpvprs = ls_matpr_cr-pvprs.</b>
ls_matpr_cr-newpvprs and ls_matpr_cr-pvprs are same in this case and the if condition fails. So no price change document is posted.
Is this a bug? Is there any OSS note available to correct this problem.
IF l_nochange IS INITIAL.
ls_matpr_cr-newpeinh = ls_price-price_unit.
<b>IF ls_ckmlcr-vprsv = 'S'.</b>
ls_matpr_cr-newstprs = l_price.
ELSE.
<b>ls_matpr_cr-newpvprs = l_price.</b>
ENDIF.
ELSE.
ls_matpr_cr-newpeinh = ls_ckmlcr-peinh.
<b>IF ls_ckmlcr-vprsv = 'S'.</b>
ls_matpr_cr-newstprs = ls_ckmlcr-stprs.
ELSE.
<b>ls_matpr_cr-newpvprs = ls_ckmlcr-pvprs.</b>
ENDIF.
ENDIF.
IF ls_matpr_cr-newpeinh = ls_matpr_cr-peinh AND
ls_matpr_cr-newstprs = ls_matpr_cr-stprs AND
<b>ls_matpr_cr-newpvprs = ls_matpr_cr-pvprs.</b>
l_nochange = 'X'.
ENDIF.
Thanks, -
Hi All,
we have created one customzied screen, in this screen we are entering material no. based on this we are getting stock details for this material.
here requriement is once i double click on material , this materail has to show in ME51N item level.
through set parameter id we are able to link to MM02 & MM03 but set parameter id is working for me51n ,please tell me how to display material in ME51N.
Thanks in advance.Hi,
Please check the below link. It might help you.
http://www.slps.org/slps_processes/2/Master%20Document%20Link/purchasing/PurchasingDocsP001_P019/PUR-006%20Create%20A%20Purchase%20Requisition%20(FO)%20-%20ME51N.pdf
with regards,
Mamta -
How to set naming standard that sets max number of words in column name?
Hi all,
Is it possible to set naming standard that sets max number of words in colum (or table) name?
I was looking video (1:08min)
http://download.oracle.com/otn_hosted_doc/sqldev/UserDefinedDesignRules/UserDefinedDesignRules.html
And here you can see how rule is triggered.
"...Name has 2 words; Max permitted - 1".
Thanks a lotHi,
you need to create glossary and set it in naming standards for your design.
This document is still valid - http://www.oracle.com/technetwork/developer-tools/datamodeler/datamodelernamingstandards-167685.pdf
Naming standard settings are located :
- DM 3.x - "Preferences>Data Modeler>Naming Standard"
- DM 4.0 - Design dialog>Settings>Naming Standard
If you want only check on number of words then glossary can be empty and you can set "Incomplete modifiers" option in that glossary.
Philip -
How to set naming standards for SQL Developer
I am using SQL Developer version 3.0.04.
In the newly integrated and very useful Data Modeler, we can set preferences for the naming standards to be applied when creating logical and relational model objects ( primary keys, foreign keys, et cetera). I would like to know if there is a way to set naming standards for the relational objects we create in SQL Developer on existing tables ( ( primary keys, foreign keys, et cetera).
Any help in setting such preferences would be appreciated.Hi,
If you want to set up a diagram for an existing database, you can use File/Data Modeler/Import/Data Dictionary to import its definitions.
Alternatively you can open a Data Modeler Browser (using View/Data Modeler/Browser), expand the node for Design "Untitled_1",
expand the node for Relational Models, and select Show from the Right-click drop-down menu for "Relational_1" to create a Relational Model diagram.
You can then drag Tables from SQL Developer's Connections tree onto the diagram.
Once you have a Relational Model you can reverse engineer it to an Entity-Relationship model using the << button in the button bar
(or by selecting "Engineer to Logical Model" from the drop-down menu for the Relational Model).
Note that there is now a separate forum for SQL Developer Data Modeler topics: SQL Developer Data Modeler
David -
How to view previous standard price in material master?
Dear expert,
in material master Costing tab 2, i can view the current and future cost estimate price. but i want to view the previous month standard cost estimate price in material master?
For these, is there any configuration setting needed?
Thanks for advanceHi
When you re-release a Std Cost - The Future cost would become the CURRENT cost and the Existing curent cost would become the PREVIOUS cost.... You can then see the Previous cost estimate in material master
br, Ajay M
Maybe you are looking for
-
I have a specific power / charging issue On HP Mini Netbook 210-1077CA. Windows 7 starter ( I think) With the computer OFF ... When I plug in the power it gives a high pitched whine. Red battery light is on, showing it is charging. (computer is off.)
-
Dump in transaction solman_workcenter
We are using solution manager 7 EHp1 when I run transction solman_workcenter sap reply with dump The URL http://FQDN:8097/sap/bc/webdynpro/sap/ags_workcenter/ was not called due to an error. Note The following error text was processed in the system S
-
HP scanjet tma Regulatory model FCLSD - 0508 for scanning of photo nagaives.
Hello, I had hp scanjet tma regulatory model fclsd - 0508 for scanning of photo nagaives. and it Sr No : [Personal Information Removed] Can you give the driver and setup program for this scanner. - Nehal Joshi
-
How do I fix placed RTF files?
I am using CS4 to place several word documents into a book and I am having the usual issues of crashing when trying to place doc files. I am not using any special tables, graphics or fonts, and even if I disable all the import options it usually cras
-
MDM can manage history of files imported or exported ?