Material standard price change!

I am trying to do a standard price change for a material using the message type 'materialvaluation_pricechang'
I configured the distribution model view and partner profiles for R/3 and XI.
When I tried to create an IDOC with test tool we19, it got created with status 51 (application doc not posted)
I got the following error. But in config I didn't see the step 'setup sending material prices'. I am working on SAP ECC 5.0.
The error description is as follows.
No Customizing data for valuation area 0013 found
Message no. CKMLSENDPRICE701
Diagnosis
The Customizing data for sending material prices to valuation area 0013 was not found.
System response
No price changes were made
Procedure
Edit the Customizing data for valuation area 0013 under Materials Management -> Valuation and Account Assignment -> Set Up Sending Material Prices
Please suggest.
Thanks,

Please find the code below in bold. I am trying to change the standard price of the material. Hence ls_ckmlcr-vprsv = 'S'. This is why the following lines in the below code never executes
ls_matpr_cr-newpvprs = l_price.
ls_matpr_cr-newpvprs = ls_ckmlcr-pvprs.
And hence the below condition fails.
IF ls_matpr_cr-newpeinh = ls_matpr_cr-peinh AND
 ls_matpr_cr-newstprs = ls_matpr_cr-stprs AND
 ls_matpr_cr-newpvprs = ls_matpr_cr-pvprs.
 l_nochange = 'X'.
 ENDIF.
ls_matpr_cr-newpvprs = ls_matpr_cr-pvprs.
ls_matpr_cr-newpvprs and ls_matpr_cr-pvprs are same in this case and the if condition fails. So no price change document is posted.
Is this a bug? Is there any OSS note available to correct this problem.
IF l_nochange IS INITIAL.
 ls_matpr_cr-newpeinh = ls_price-price_unit.
 IF ls_ckmlcr-vprsv = 'S'.
 ls_matpr_cr-newstprs = l_price.
 ELSE.
 ls_matpr_cr-newpvprs = l_price.
 ENDIF.
 ELSE.
 ls_matpr_cr-newpeinh = ls_ckmlcr-peinh.
 IF ls_ckmlcr-vprsv = 'S'.
 ls_matpr_cr-newstprs = ls_ckmlcr-stprs.
 ELSE.
 ls_matpr_cr-newpvprs = ls_ckmlcr-pvprs.
 ENDIF.
 ENDIF.
 IF ls_matpr_cr-newpeinh = ls_matpr_cr-peinh AND
 ls_matpr_cr-newstprs = ls_matpr_cr-stprs AND
 ls_matpr_cr-newpvprs = ls_matpr_cr-pvprs.
 l_nochange = 'X'.
 ENDIF.
Thanks,

Similar Messages

Report on difference between PO price and Material standard price

Hi,
We need a report on Purchase price difference, which is report showing Open PO price & Material standard price, if there is a price difference
This need to be run every day to avoid buyer changing price at PO level unless there is a valid reason
Similarly difference if any between Schedule agreement price & Material master standard price
Please help

Hi,
There is no standard report available for this.
You need to develop one.
Considering your requirement, it can be achieved with a query as well provided you do not need complex functionality out of the report.
Hope this helps.

Abap function module for material standard price.

Dear Team,
Can anyone tell me the abap function module for getting material standard price respective of date and material code as input.
I have observe table MBEW, where we will get standard price of a material for last change date. Not getting any table where price is coming out wrt of Date for a same material.
Thx in advance
Rgds
sp
kolkata

HI.
FM MSR1_MD_MATPRICE_GETLIST should help.u.
Regd,
AS

Standard Price Change

Hello Sap Gurus,
Is there any way to change the material standard price without using MR21 and generating an account document ?
Thanks,
Alex

If the material is mainatined on price control S and stock is available, then system will generate Accounting enrtry irrespective of transaction code. If the price control is V then Accounting document will not get generated.
Regards
Rakesh Pawaskar

A Function or BAPI to get Material Standard Price?

Hi All,
I need a Function or BAPI to get the Material Standard Price when the following Criteria is given;
1. Material Code
2. Plant
3. Period
4. Year
5. Company Currency (Optional)
I need only the Standard Price and Price Unit. Please give me a example with sample values.
Thanks,
Kishan

Sri:
I need only the Standard Price and Price Unit
there is no specific FM for that.
you need to write small select query in FM than use this custom FM into your program.
Amit.

How to get Material standard price: MBEW-STPRS?

Hi BW experts,
I am wondering what is the best way to extract data for material standard price in Material master data - Accounting view (MBEW-STPRS)?
I checked existing extractors for material master, but I didin't find one which could be used.
Any help and feedback will be awarded.
Thanks and regards.
Sally

Hi Sally,
Check if 0CO_PC_ACT_05 helps here.
http://help.sap.com/saphelp_nw04/helpdata/en/22/1b383fdb800804e10000000a114084/content.htm

Material Standard Price update.

I've been trying to update a material standard price via BAPI_MATERIAL_SAVEDATA or MY_MATERIAL_PRICE_UPDATE, with no success.
I've followed the example code give in the thread /message/9187089#9187089 [original link is broken].
Has anyone gotten this to work?

Sure.
Costing Type (OKKI) : 01 Standard Cost estimate (material), in this Price update: Standard price & Valuation View: Legal valuation.
Valuation variant components:
001: Planned valuation Materials: priority 1. Price frm purchasing info records, 2. Valuation price according to price control in material master 3.Valuation price with user Exit.
007: Production Order Actual: priority 1. Valuation price according to price control in material master.
Edited by: KMadhumati on Aug 12, 2009 9:44 AM

How to set material standard price to zero

Hi,
I am facing a problem relating to standard price of material. The material price control indicator is S. The standard price of that material is 300/-. I need to change 300/- to zero. How can i do that?
Pl. advise. I will assign the points for the answer.
Bye

Is this a purchased part?
does the material have a cost estimate?
The price control is "S" ??

Material std. price change

hii
Can we change the std. price of material...if yes..then pls tell me t.code..?
regards
Rekha sharma

hi rekha,
Are you talking about changing the "Price control" (Price control S to V) or just a standard price amount in a material?
If you want just the amount then use MR21. And then give the new value as the new price.
If you want to change the price control then it has few prerequisites prior change it.
You need to delete all open PO line items, Production Orders and stocks.
Then only you can change the control. And it will give all open orders when you try to change it.
If you delete all then you can use MASS to change it mass level.
Hope this will helpful.
thanks & BR
sandun

Report displaying Material Standard Price and PO Price

Hello Experts
We have materials which are purchased. Price control is maintained as standard price and standard price is maintained using T Code MR21 periodically.
Due to this when PO price is different from standard price maintained in material master (usually PO price is higher than standard price) all price difference are posted to price difference GL at the time of GR.
Now users want to check variations between standard price and PO price for the material receipts.
Can anyone suggest me any report which provides details of standard price and PO price for the material receipts?
Thanks in advance for your help.
Satya Alapati

Nothing std I'm aware of either. You could consider using the messages 06 205/6/7 to get a warning at the time POs are created that price varies significantly from std.
Config help text below:
Set Tolerance Limits for Price Variance
In this step, you define the tolerance limits for price variances.
When processing a purchase order, the system checks whether the effective price of a PO item shows variances compared with the valuation price stored in the material master record. In addition, it checks whether the specified cash discount value is admissible.
Variances are allowed within the framework of tolerance limits. If a variance exceeds a tolerance limit, the system issues a warning or error message.
In the SAP System, the types of variance are represented by the tolerance keys. For each tolerance key, you can define percentage and value-dependent upper and lower limits per company code.
Standard settings
The standard SAP System supplied contains the following tolerance keys:
PE Price variance, Purchasing
Tolerance limit for system message no. 207. This message appears if the specified effective price exceeds the predefined tolerances when compared with the material price.
SE Maximum cash discount deduction, Purchasing
Tolerance limit for system message no. 231. This is a warning message, which appears when the specified cash discount percentage exceeds the predefined tolerances.
Note
You can specify whether the system message appears as a warning or error message using the menu options Environment -> Define Attributes of System Messages.
Activities
Maintain the tolerance limits for each tolerance key per company code.
Regards,
Nick

Material unit price change during GR

Hi All,
We are doing import purchase and we have not done any changes for PO price but there is sudden change in material unit price in MIGO.
Please guide
Thanks and Regards
Pavan

Dear,
Kindly check the currency which are maintained in the PO and GRN currency.
There might be difference in the currency.
Regards
Utsav

Material disadvantage price change 12 month auto r...

Not sure of the original T&C's, can I walk away from the next few months of my contract? Surely a 12 month tie in becomes null and void if a material part of the contract completely changes?

echodale wrote:
I can't find any t&C's that mention it but surely under UK law you can't lock someone in and then change the price
You're not looking hard enough. It's in BT's Residential Standard Terms, paragraph 52:
"If we let you know about a change to the price or the terms and conditions of a service which is to your material disadvantage, you will not have to pay a charge if you decide to end that service early, unless the Tariff Guide says otherwise. However, once we have told you about such a change, using one of the methods detailed in paragraph 50, you must let us know within 10 days that you want to end that service by giving us the written notice set out in paragraph 21. Only the services that are directly affected by the changes we make can be ended without paying an early termination charge for that service and this agreement will continue to apply to any other services that are not affected by those changes." http://www.productsandservices.bt.com/consumerProducts/dynamicmodules/pagecontentfooter/pageContentF...

Material Master Price Change

Dear All,
We have maintained Material Price as zero in the material master .Now we want to change the material price to the actual price .What is the process steps we have to follow.
Thanks,

HI,
Go to MR 21 , here give the plant and executte,
Next screen enter the material and new price.
Now you in material master.
Note: consult the inanacill and aloso also any Open orders.
Regards,
Andraaa

Mass Change Standard Price in Accounting view of material master

Hi anybody,
I am maintaining more than 5000 records material master . Each time change material prices using MR21, but I don't want go MR21. need to develope one abap program for change material standard prices using BAPI or normal ABAP Program. how do I develope?
please give me sample program for that.
Thanks
S.Muthu

Hello Mani
I have already checked all the open items.....
No sale order. No entry in table MSEG.
Only one PO without GR.....So that should not make any difference.
Br
Avinash

BAPI to change the standard price of the material

Hello Friends ,
I am struggling to find a BAPI to change material standard price. I found 2 BAPIs mentioned below. But was not able to make use of them.
1) BAPI_MATVAL_PRICE_CHANGE
2) BAPI_MATERIAL_SAVEDATA
Can any of you help me in finding right BAPI?

BAPI_MATVAL_PRICE_CHANGE
PRICES_CHANGE & PRICES_POST
BAPI_M_REVAL_CREATEPRICECHANGE
BAPI_MATERIAL_SAVEDATA
These are the fm's to save or change material price.

Material standard price change!

Similar Messages

Maybe you are looking for