How to set module to be on top of another module

hello guys!! i'm just newbie in flex, and cant figured out
how to manage loaded modules to set who's on top of each other. if
i load one module then loads another one, the last module loaded is
the one on top what i want to happen is when i click on the first
module it should be brought on top. how can i do these?

here is my code inside a function that loads the module, this
is being called from a menuBar event
var moduleLdr:ModuleLoader = new ModuleLoader();
moduleLdr.id = event.item.@label;
moduleLdr.url = event.item.@data;
this.addChild(moduleLdr);

Similar Messages

How to set a menu as a top or root one

Hello to all,
I am using Encore CS5.1
1)The problem.
I would like to set the first menu in the sequence as the "Root menu" (or "Top menu" depending on the remote control).
Unfortunately in the DVD I have made each time I click on the key "Top menu" the DVD comes back to a submenu.
2)The details
Let's look at the following flowchart.
I would like to transform the menu "Nicole_et_JP" (yellow circle) as the "Top menu". The problem is that when I click on the "Top menu" key on my remote control the DVD player goes to "C_etait_nous_menu" (red circle).
Maybe the numbers B2 (for the first one) and B1 (for the second one) are related to the problem.
3)The question
I have not found out the answer in the help. So could you help me to learn how to set a given menu as a root (or top) one.
Any help appreciated, thank you.
Jean-Paul

I don't know where I got this note, but it illustrates why I stay confused about remotes:
DVDs have a title or top menu, which will take the user to the menu specified for title remote. Timelines have a menu property, which takes you to the menu specified for the timeline (menu remote). The two should not be confused.
Go to the Flowchart and select the Disc icon. Then look at the Properties panel. Set the title remote as you wish - where will the user go when they push the top menu button.
So, logically, I suspect that you do not have the "title remote" set correctly.
But it may also turn out that the buttons are not doing what the Adobe help file says. (I suspect that is where I got the above verbiage. But I can't find it now.) And I have not gotten around to testing this. It is one of those things that can only be tested using real remotes and not computer player.
Maybe the numbers B2 (for the first one) and B1 (for the second one) are related to the problem.
The B1 and B2 show the default button for the menu.

How to set column value to blank based on another column's condition in validation settings in sharepoint 2010?

I need to set a field to be blank when another field is blank:
when [Return Date] is blank [when item has not been returned]
[Received by] should be set to blank
I tried this:
=IF(ISBLANK([Return Date]),ISBLANK([Received by]),TRUE)
But it failed.
Is this possible through list validation settings?

Hi
you cannot reference another column in a formula that creates a default value for a column.
PF below link for the same.
http://ricardoramirezblog.wordpress.com/2013/05/02/calculated-field-formulas-for-default-value/
Regards,
Rajendra Singh
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful
http://sharepointundefind.wordpress.com/

How to set a date variable to "top of the next hour"?

hi
i have a idler script that i want to continually run. at the moment it idles for an hour, then runs the "on idle" handler.
what i would prefer is to set this to the "top of the next hour", for any hour. e.g. if its 4:35, it would set it to 5:00. is there a simple, standard way of doing this, or will i need to do some maths to get to the result?
regards
jingo_man

Hello
Using idle handler, you'd need to calculate the seconds to the next hour.
Something like the below.
Cheers,
H
--CODE
on idle
-- code for idle handler here
set t to (current date)'s time -- current time
set d to (t div 3600 + 1) * 3600 - t -- seconds to the next hour
return d -- wait until then
end idle
--END OF CODE

How to set client within SQL statement without using another pl/sql stmt.

I have a following select statement
SELECT SUM (w.prior_forecasted_costs + w.prior_committed_costs)
FROM xxsuf.job_cost_summary_table w,
apps.pa_periods p,
pa.pa_resources bz,
pa.pa_resource_list_members cz,
pa.pa_tasks dz
WHERE w.project_id = z.project_id
AND w.task_id = dz.task_id
AND dz.task_number '98000'
AND w.resource_list_member_id = cz.resource_list_member_id
AND cz.resource_id = bz.resource_id
AND NOT EXISTS (SELECT NULL
FROM pa.pa_tasks zz
WHERE zz.parent_task_id = dz.task_id)
AND w.resource_list_member_id != 1000
AND p.period_name = w.pa_period
AND p.current_pa_period_flag = 'Y'
Above select statement uses pa_periods view which only works when I set my client using "exec DBMS_Application_Info.set_client_info(83);" in Toad or SQL*Plus session.
I was wondering how can I achieve it within select statement. so that I don't have to use another PL/SQL statement to set my client. Is there anyway to set client with my org id within above select statement ?
Please advise.
--Rakesh

You can simply create a function which calls dbms_application_info and use that in your sql statement as in
SQL> create or replace function set_client_info (i_info varchar2)
   return varchar2
as
begin
   dbms_application_info.set_client_info (i_info);
   return i_info;
end set_client_info;
Function created.
SQL> create or replace view v_emp
as
select * from emp where empno = to_number(sys_context('userenv','client_info'))
View created.
SQL> select ename from v_emp where set_client_info(7788) is not null
ENAME
SCOTT
1 row selected.
SQL> select ename from v_emp where set_client_info(7900) is not null
ENAME
JAMES
1 row selected.

How can I put one "shape" on top of another in pages?

Hi all:
I'm trying to do something pretty simple. I made some shapes using the "shapes" tool in the toolbar. I want to put one shape on top of (or in front of) another but it gives me the masking tool instead. I tried putting a shap in the background but that didn't work either. it tends to snap the shape I move to it right back to where it was when I tried to move it. How can I do this?
Thanks!

I really don't understand what you are doing.
I inserted two shapes with their default settings and I got what you see.
I unchecked the box "Object causes wrap" but it's usefull when there are text objects in the page.
Yvan KOENIG (VALLAURIS, France) samedi 7 avril 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

How do I put a div on top of another?

I have one div tag for my header, and one for my body. Now I want to put buttons over them, how do I do it?
Any way that I can find leaves the buttons floating out in space, not anchored to the header. So they move around when the window is resized.
Help!

And do not use AP divs to try to do that.
For the underlying div (assuming you have a background image) your CSS should be:
.underlyingDiv {
background-image: url("/images/myimage.jpg");
.divThatSitsOnTop {
margin: (some margin code that places the div where you want it);
Your html will be:
<div class="underlyingDiv">
<div class="divThatSitsOnTop">This sits on top
</div>
</div>
Now, I have used "Classes" here, not "IDs." Anything that occurs only once in a given web page may be an ID and not a class. Anything that is used several times in a web page must be a Class. Classes are defined in CSS with a dot before them, IDs with a hash (#).

How to set up triangle business in purchase order and intrastat

Hi all,
my question is, how to set up the supplier when they
instructs another supplier in an different country with delivery.
I can change the UID in the Goods Receipt but intrastat ignores this.
thank you
Gerhard
Edited by: Rui Pereira on Jan 19, 2009 4:53 PM

Hi Gerhard,
Sorry for very very late reply.
But I want to know if you are raising PO on supplier A then why you required track of supplier B.
Now just see,
If you want to pay any extra charges for supplier B then you can make this transaction by using Landed Cost functionality. In that in Broker field you put supplier B . so that supplier B's account also get hitted.
But I want to know why you want to consider tracking of supplier B. Supplier A can purchase material from anywhere. You have to make A/P Invoice on supllier A only.
Plz revert back if it not solves your problem.
Thanks
Yatindra

How to set up for user's request to go through a specific module that i selected

I am testing if it is possible all requests from users should go through a module
that i made or not.
For example, all most web server is setted all requests should go through the
log module for writing log when users request a certain page.
Like this, how to set up the configuration all request should go through a certain
module.
Would you tell me the answer please.

Power on the Time Capsule for a few minutes, then hold in the reset button firmly with a ball point pen or something similar for 10 seconds and release. Allow a full minute for the Time Capsule to restart to a slow, blinking amber light.
Connect an Ethernet cable from one of the LAN <--> Ethernet ports on the back of the Uverse router to the WAN "O" port on the Time Capsule
On your Mac, open up Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Other WiFi Devices tab
Click on the Time Capsule
The setup utility will open up automatically and take a minute to analyze the connections then suggest a setup on a screen that looks like this:
Type in a simple name that you want to use for the Wireless Network Name
Type in a name that you want to use for the Time Capsule device
Type in a password
Verify the password
Click Next
The utility will set everything up for you in a minute or two. When you see the message of Setup Complete on the screen, click Done
You can now log onto the wireless network that you created by selecting the name and entering the password
Post back on your progress and we will next get backups going again

How to set error message inside the loop...module pool

Dear all,
     Am creating Table Control without wizard. In that i am looping the values, that is, Once if i entered 5 digit values means, 12345-08... the values should be stored in z-table like this 12345,12346,12347,12348 . That is 5-8 it as to update in z table. for this i createdloop at itab and inside that i written a code to count the value and all. and also its clearly updating the value in ztable too. now i want to know, if once again i entered the same value means, like 12345-08.. it as to show error messge.I dont know how to set the condition with error message inside the single loop .... Its all comes under module pool program.
Thanks,
Santhosh.R

If i understood your doubt, here goes the answer.
LOOP AT itab INTO wa_itab. " This is your loop
l_tabix = sy-tabix. "l_tabix receives the line of the loop
READ TABLE itab WITH KEY itab = wa_itab. "itab is the same tab of your loop
IF sy-subrc EQ 0 AND l_tabix NE sy-tabix.    "Here the sy tabix have the value of the read table.
*     Here you do your error treatment.
ENDIF.
ENDLOOP.
Explanation: When you are looping your internal table, you use a READ TABLE to see the already recorded registers. If the read table finds one register (sy-subrc EQ 0) and the this register is not the one of the current line (l_tabix NE sy-tabix). It means you have a duplicated register.
Maybe there is someway easier to do this, but this is what i thought now.
I hope this was your doubt hehe.
Thales Schmidt

How to set different icons for different windows which is seen in the top left corner?

Hi
How to set different icons for different windows which is seen in the top left corner? I know when building exe there is a option to edit icons or add icons and that icon is default for all the windows in the project. But i want different icons for different windows which is possible in VB.
Is there any way to set icon by calling any dlls.
Thanks & Regards
Samuel J
[email protected]

Hi Sam,
no problem. See the attachment.
Mike
Attachments:
TestIcon_LV85.zip ‏44 KB

How to set optional for table structure in functiona module

hi experts,
as i have small doubt regarding
while publishing web service by using rfc where i am unable to set optional for table structure i am able to put optional for import parameters may i know how to set optional for table structure ....
reagrds prabhanjan

Ignoring the TABLES/CHANGING/EXPORTING argument...
while publishing web service by using rfc where i am unable to set optional for table structure i am able to put optional for import parameters may i know how to set optional for table structure
Why not? There's no issue with marking a TABLES interface parameter with 'Optional' and publishing the function module or function group as a web service...

How to set default currency and Country in R12 financial modules

Hi all,
How to set default currency and Country in R12 financial modules (AR,AP,GL,FA,CE) becuase I found some default settings are shown "USD" & "United States" such as create AR Customer, the Country is shown the default "United States"....
Can anybody advise ?
Thanks & Regards,

Hi,
Change the below profile for the user to a territory different than the US :
In System Administrator, navigate to Profiles -> System.
Select Site, Application, and Responsibility.
Profile options:
Default Country
HZ: Reference Territory
ICX: Territory
Regards,
Raju.

How we set up multiple websites on OSX Server

BACKGROUND
After fiddling and futzing around for weeks (actually since last year) I've finally figured out how to set up multiple websites (virtual sites) using one port and one IP address. While there seems to be lots of discussion on this topic, it seems that the basic assumption is that one knows everything about websites, DNS and all that stuff, which I do not.
When our network was originally established the engineer set up a wiki and also configured webmail, so we had two sites, one secured for mail and the other open for Calendar and the wiki. We were not hosting any websites locally because our school website is hosted by a company in New England.
This year I wanted to set up websites for teachers and students. As great as the wiki is, there are some things it just can't do as well as a website. So I figured if I set up the sites teachers could link back and forth from one to the other. In addition kids could now start to use a real website instead of the cobbled together file mess I had when we ran a Windows network. Also iWeb is a much more accessible tool than FrontPage.
SERVER SIDE:
Snow Leopard Server - 10.6.4
There are two - actually three pieces if you want your iWeb clients to connect to the server: Server Side Web Services, DNS and, in my case, FTP.
================================================ SERVER SIDE - WEB SERVICES
If you haven't turned on Web services, you'll need to open Server Admin and do that. If you don't know how to set up web services - just reply and I'll step you through that as well.
Once web services are set up and turned on, you'll see it listed under your server’s name in the Server Admin sidebar. Click on "Web" and then click on the "Sites" tab at the top of page. This is where you list all your sites.
Click the plus button and enter the fully qualified name of your site, for example: "students.myschool.org". Don't use the defaults here (no name) - that's what got me in trouble before. BE SPECIFIC!
You'll be looking at the "General" tab (the other tabs, "Options", "Realms", etc. we'll deal with in a second).
On the "General Tab", the default IP address ("any") and port (80) is just fine. We'll run everything over port 80. (Apache figures all the virtual site stuff out - you don't need your rocket science degree for that.)
"Web Folder:" is important because this is how you'll "segment" your websites. While I would NEVER do this again, we have a solid state hard drive for the OS and a RAID array for our data files. IF you have that, make sure you do NOT use the default "Web Folder" because it will store all your files on your solid state drive. There may not be enough room, over time, on that drive. I've not experienced it yet, but it's my understanding that if the drive fills up, the server shuts down.
I store my web sites on a folder on the RAID array.
Everything else on that tab can be left as the default. (Just make sure that you have an "index.html" or "index.php" file in your web folder root, but iWeb will take care of that for you.)
I would put in your email address in the "Administrator Email:" field.
Under "Options" you really don't have to put anything. I've tested making websites with iWeb and it doesn't appear that anything needs to be checked.
Nothing needs to be entered in "Realms" as well from what I see working w/ iWeb.
The defaults in "Logging" are fine.
You can leave "Security" alone, but we do have a (self-issued) certificate listed for our webmail site.
"Aliases" is important. Under "Web Server Aliases" you enter how you want the site to respond to when users type in a URL in their web browsers.
When our web server was initially set up the engineer set up "wiki.myschool.org" on port 80 and "mail.myschool.org" on port 443. In the aliases section was nothing but a "*" (the wildcard character). That means, from what I can figure out, that the webserver will respond to these sites regardless of what is typed in the URL. (Well, something like that - point is, if you create OTHER websites, you'll NEVER get to them because the wildcard character in the "Aliases" section, in effect, grabs those web requests and redirects them to the sites that are already there.
In my case I deleted both of those wild card characters. For my "wiki.myschool.org" site, I entered "mail.myschool.org". That means if you type EITHER "wiki." or "mail.", go to the site that’s stored in the “Web Folder” we set up when those sites were created.
For "mail.myschool.org" I just DELETED the wildcard character. I wanted that site (since it was secured) only to respond to "mail." - nothing else. (You're not going to that secured site for any other reason than to get your mail.)
"Proxy" can be left blank. Have no idea what that does. As time permits I'll do some research and figure out what it's used for.
"Web Services" is if you want to provide any MORE services to this particular site. Most likely you'll want to uncheck all the boxes. For our "wiki." site, we have checked "Wikis", "Blogs", and "Calendar". For our "mail." site we have those checked PLUS "Mail".
I would create a separate "Web Folder" for each of your sites. I don't know if that's a requirement but for housekeeping purposes, I would keep the sites separated. And I SUSPECT that it's "best practice" to separate your wiki from your other websites.
SERVER SIDE - DNS
OK...now you have to make your site reachable and the only way to do that is to set up DNS so that folks don't need to type in the IP address of your web server. You need to set up DNS inside your network and, if you want folks in the outside world to reach your website, you'll need to set up an external DNS as well. I'm going to cover INTERNAL DNS - if you don't know how to set up EXTERNAL DNS - reply or email me and I'll post those instructions.
Most likely you have already created Zones for you network...all you really need to do is create "Aliases" so that when you type "students.myschool.org" your web browser will know that site resides on IP address XXX.XXX.XXX.XXX.
If you've set up Zones then you already have a "Machine" setting that translates your server’s name to an IP address and vice versa.
All you need to do is create an "Alias" (CNAME) record for, in this case, "students". You’ll see the choices for types of records when you click the "Add Record" button.
There are only two fields to configure for a record: "Alias Name" - in this case "students" and "Destination" - in this case "servername.myschool.org". (You've already entered a machine record that says "servername" = 192.168.1.x.)
That's it for Internal DNS.
SERVER SIDE - FTP
Now you have to get iWeb to communicate with the webserver.
There are only three ways iWeb will communicate with webservers: MobileMe, Local Folder and FTP Server.
Local Folder is really only practical if you want to host a website on a laptop (I was blown away initially when I found out that all Macs had a built-in web server - how neat is that?). I think there are some very cool things teachers could do with configuration, and, of course, you wouldn't need to set up any web services on the web server, but that's for another discussion. You need to set up FTP services on the web server.
Turn on and enable FTP on your webserver.
You can leave the defaults for "General", "Messages" and "Logging". "Advanced" is the only thing you want to set. I set "Authenticated Users See:" to "Home Folder Only". I set the "FTP Root" to the same root folder in which I plan to store my web sites (/VOLUMES/RAID Array/WebServer/Documents). This setting sets that folder only to be accessible via FTP.
I would suggest returning to your DNS settings and adding one more "Alias". Set "ftp." to point to your webserver. Why? So folks can edit their sites from home (see below).
CAVEAT: If you are running FTP on other servers, make sure that the settings here do not conflict with the settings on the other servers. For example, I'm running FTP on my file server so that my scanners can communicate with it. However, I configure my FTP settings by machine name and NOT "ftp.myschool.org".
================================================
CLIENT SIDE - CONFIGURING iWEB
Now you have to configure iWeb so that it will communicate with your server.
Click on the "Site" icon so that "Site Publishing Settings" appears.
Publishing:
"Publish to:" = "FTP Server"
You can set the "Site name:" and "Contact email:" to whatever you want. But see below!
FTP Server Settings:
"Server address"=ftp.myschool.org (you could also enter in servername.myschool.org or the IP address. However, if you want folks to be able to work on the site from home, you will need to configure external DNS for that. If you use the IP address, you're out of luck for remote access to the site. (You can do it but it's beyond the scope of this discussion.)
"Username" & "Password" should be your user's network login credentials.
"Directory/Path" - this is important. Remember, you set your "FTP Root" to be "/VOLUMES/RAID Array/WebServer/Documents". If you leave this field blank then the website will be dumped into this folder. If you are only setting up one site, that may be OK. However I wanted to set up a "students" site folder, a "faculty" site folder and a separate site for our literary magazine.
THEREFORE: I have, in my ..../Documents folder (on the server), a "students" folder, a "faculty" folder, and a "litmag" folder.
SO...in my "Directory/Path:" field, I have "/faculty". That means the full path to this website is "ftp root/faculty" or "/VOLUMES/RAID Array/WebServer/Documents/faculty" (You don't need a trailing "/" character. iWeb will automatically append the folder for you user depending on what you entered in "Site Name:" in the "Publishing" area.
Website URL:
This is the root website depending on whether it is "students" or "faculty". Since iWeb will append the site name to this root website, I accomplished what I hoped to accomplish in this post (http://discussions.apple.com/message.jspa?messageID=12288561#12288561).
Faculty sites will be @ http://faculty.myschool.org/username. Students @ http://students.myschool.org/username. PERFECT!
iWeb is such a GREAT tool - NOW the kids can start using it!
I want to reiterate that this works for our school but it should work for you as well. There may be better ways to do this but it works for us.
Hope this has been helpful and you won't have to spend weeks trying to figure this all out by yourself!

OK...here's how we did it.
To get access to the website you created from outside your network there are a couple of steps.
First, you have to have a STATIC IP address from your ISP. If you have a T1 circuit, no problem...you usually get a couple of static IPs you can use. However, if you have a cable modem circuit, most likely you have a dynamic IP address which changes when you connect to the internet. Usually a static IP will cost a bit more because the ISP has to go through a couple of steps to set it up for you. But once you have the address, you now have a way for folks outside your network to connect with you.
(I’m also assuming that you use a router of some sort through which traffic flows out to the internet and that you aren’t using connection sharing or something like that.)
The next thing you need to do is have your new static IP address associated with the server on which you are hosting your website. You've probably already done that if your website works inside your network. However, you've associated a private ip (192.168.x.x, etc.) to your web server. That doesn't mean anything to folks on the outside because private IP addresses are just that - private - folks can't access them. (I won't get into VPN because that's a whole other topic.)
The way you associate your new static IP address to your web server is through some sort of dns application from your ISP. For example, we use TierraNet to manage our external DNS information. They have a web interface control panel that is very similar to the DNS interface for XServer. You can create CNAME records (aliases - other ways that folks can access your servers).
Basically you create an "A" (CNAME) record with a fully qualified domain name (e.g. webserver.myschool.org) and point it to your public IP address (XXX.XXX.XXX.XXX) which you just got from your ISP. It's going to take a while (24-48 hours) for this change to take effect. BTW, you can create as many “A” records as you want. For example mail.myschool.com and wiki.myschool.com could point to the same place.
You want to make sure that the fully qualified domain name you enter in the external dns utility matches the name you used when you created your internal dns records on your XServer.
OK...so now folks can get to your domain - but, remember, you have a private network IP scheme between them and you. You now have to tell your router that when web traffic arrives, allow it inside the network and direct it to your web server.
Let's say your public IP address is 205.100.112.50 and your web server is 192.168.0.5.
You have to create, in your router’s "Security Zone" (router companies call them different things) a couple of rules. Usually the first rule is: "Let everything inside the network get out to the web." You've probably already done that if folks inside the network can reach the internet.
You then have to tell the router to allow web traffic (port 80) into your network AND redirect that traffic to 192.168.0.5.
We use AdTran routers and they have a web interface which allows you to write "rules" affecting public and private traffic. Public is folks outside the network, private is folks inside.
AdTran calls them "Security Zones" and you modify those zones with policies.
So my "Policy" would say, in the above example, redirect traffic from my public IP (205.100.112.50) -> to my web server -> (192.168.0.5).
THEN you have to modify this policy with what AdTran calls "Traffic Selectors". You've said, OK, you can get in, but WHAT can get in?
The "Traffic Selector" is written to say: "Permit" "TCP" traffic from 205.100.112.50 only through Port 80. (That's the port that web traffic goes over. If you wanted a secure website, you'd add another traffic selector that opens port 443, for example.)
I'll tell you I'm no genius when it comes to this. I called AdTran and had them configure my router for me. I told them what I wanted done, they remoted into the router and configured it. But then I could go to the web interface and see what they did and then added rules later on when I wanted, for example, to get access to the network via Apple Remote Desktop or VPN into the network on my iPad.
I'd bet that your router has a maintenance agreement that includes this service and if it doesn't it should have.
I did find that I still had issues when I tried to set this up originally and it had to do with the ORDER of the policies. I can’t remember exactly what the issue was, but, effectively one of the policies highjacked traffic before the policy that I wanted got triggered. Simply moving them around in the list fixed that issue. So if you have this set up but still can’t access the site, check the order of your rules.
I don’t know if that helps or not, but I try to think about this stuff conceptually and then get someone to help me with the details. I work with this stuff so infrequently that I forgot how I did something 6 months or a year ago. I’m in the process of creating a wiki for the school which documents all this stuff, but that’s a major undertaking.
Cheers,
John

How to set Parameters in RRW3_GET_QUERY_VIEW_DATA

Hello All,
I am trying to use RRW3_GET_QUERY_VIEW_DATA function module for executing a query. Currently i am stuck big time figuring out how to set the parameters in I_T_PARAMETER.
I my case i need to run a query with the following key,value pairs
1. 0I_FY_OP = 001.2004
2. ZHWORKCT = ABC
Can some one throw more light into how to set the above parameters into I_T_PARAMETER??
Thanks a lot,
Naveen

Hello Prathibha,
Thanks for the quick respone. I did go though the weblog and am trying to find my way through the documentation. I was wondering if the BW gurus could point me to some useful tips or examples.
Thanks a lot,
Naveen

How to set module to be on top of another module

Similar Messages

Maybe you are looking for