How to set report server to process 2 reports concurrently?

Dear Sir,
I'm using Oracle9iAS R2 Enterprise edition.
Can the report server be configured to handle 2 concurrent requests?
Reason being our production system, when one big report is being generated, the small report that comes second will need to wait for the first report to finish.
As a result, the users experience slowness in generating the report because it got queued in the report server.
Any way to configure report server to process reports concurrently?
Please advise.
Thanks.

Thanks.
Would like to check with you the behaviour of report server when I have set the maxEngine to 2.
Assuming:
I run report A, take 5 minutes to complete.
At the same time (before report A finishes) I run report B, take 1 minute to complete.
Before report B finish, I run report C, which will also take 1 minute to complete.
My questions are,
1. Will report C be queued under 1st report engine or 2nd report engine?
2. Will report C be processed as soon as report B is completed while report A is still generating?
Please advise.
Thanks.

Similar Messages

A failure occurred while the server was processing report file

Hi All,
I keep getting this error while opening the report in Infoview, "A failure occurred while the server was processing report file".
I checked Event viewer there i have lot of errors with the same message and the source is "BusinessObject_crproc".
Please advise me what i have to do to resolve the issue.
Environment: BOXI3.1, CR2008, Windows Server 2003
Thanks
Sudharsan.

We got this error message on a report that had 5 subreports, 3 of which were based on stored procedures. The report was running fine in our Dev environment and in the CR developer, but not when we published it to another environment. The problem was caused because the stored procedures had been changed in Dev (so that they ran correctly) but these changes had not been released to the other environment. Once the scripts were run to update the stored procedures the report ran successfully. So it apepars that the problem was because the stored procedure/s the subreports were using were failing, but we only got the RCIRAS0546 error message.

How to set SQL Server Login MUST_CHANGE, CHECK_POLICY, CHECK_EXPIRATION all to OFF with T-SQL

How to set SQL Server Login MUST_CHANGE, CHECK_POLICY, CHECK_EXPIRATION all to OFF with T-SQL. SSMS will not allow me to change policies to OFF. Error: 15128 - The CHECK_POLICY and CHECK_EXPIRATION options cannot be turned OFF when MUST_CHANGE is
on. I am attempting to change these options in a test environment. Thanks, Richard

It appears you have to change the password first(it could the same password but an alter command needs to be done)
check this : http://www.sqldbadiaries.com/2010/11/07/the-check_policy-and-check_expiration-options-cannot-be-turned-off-when-must_change-is-on/
http://sqldbpool.com/2012/10/08/the-check_policy-and-check_expiration-options-cannot-be-turned-off-when-must_change-is-on-microsoft-sql-server-error-15128/
Hope it Helps!!

Oracle Apps Report error "Oracle Reports Server CGI - The Reports Server Engine terminated abnormally."

Hi ,
I have modified layout of one existing custom report.
I have added 3 columns in the report , Now when I execute the report sometimes it gets executed with the newly added columns and sometimes it errors out with below error.
Error: The requested URL was not found, or cannot be served at this time.
Oracle Reports Server CGI - The Reports Server Engine terminated abnormally.
Any pointers in this regards will be appreciated.
Thanks

I found there were some srw.message statement ( used for debugging purpose) were there , when I removed those statements. This error was gone.

Can 10g OAS run 10g Report server and 6i reports together?

Re-posted from the OAS thread: Can 10g OAS run 10g Report server and 6i reports together?
We have need to run 6i and 10g reports from the same physical server running OAS 10g.
Are there issues / conflicts?
There are hundreds of 6i reports called from many applications. Converting completely is a separate project on the books.
The need is to utilize 10g graphs on this urgent project. The graphing in 6i has not gotten along here with RAC and other distributed architecture. Additionally, I believe the 6i graph runtime would have to be installed on each client workstation... again, hundreds.
Thank you.

Hello,
You can install OAS 10g and Reports 6i on the same server as long as they are installed in different ORACLE_HOME ..
Take car to the value of the variable PATH ..
Regards

How to set up the path for Report Server's output

I've had 9iAS on NT 4 platform with Service Pack 6.
By default, the Report Server's output goes to the
C:\Oracle\806\Bin
How can we change this setting ?
(in 6iserver.conf we don't have a variable for it.)
I'll appreciate any help.
Thanks.
Izabella.

Thanks for reply.
In my \Report60\Server\myrepsvr.ora I have :
cachedir="E:\Oracle\806\REPORT60\server\cache"
but when I call :
http://<host>:<port>/dev60cgi/Rwcgi60.exe?
report=myrep.rdf&destype=file&desformat=pdf
&paramform=no
the created pdf report doesn't go to the specified cashedir, but goes to the
C:\Oracle\806\Bin
How can I handle it ?
I'd like to see the pdf file in the cachedir,
not in Bin.
Izabella.

How to set the working directory for reports in linux

Hi All,
Can you anyone help me to set the working directory for oracle application server 10g reports? I am using RHEL4 and AS10g. Actually i want to run my reports from my define
working directory. How can I do this?
Thanks in advance
Arif

Hi,
your rep_srv.conf should look like something like
+<?xml version = '1.0' encoding = 'ISO-8859-1'?>+
+<!DOCTYPE server PUBLIC "-//Oracle Corp.//DTD Reports Server Configuration //EN" "file:D:\oracle\FRHome_1/reports/dtd/rwserverconf.dtd">+
+<server version="10.1.2.0.2">+
++
++
+<cache class="oracle.reports.cache.RWCache">+
+<property name="cacheSize" value="50"/>+
++
++
++
+</cache>+
+<engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="3" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="90000" jvmOptions="-Xmx512M -Xss512K">+
++
++
++
+</engine>+
+...+
some more definitions
+..+
++
+<pluginParam name="xmlpds" type="file">xmlpds.conf</pluginParam>+
+<pluginParam name="jdbcpds" type="file">jdbcpds.conf</pluginParam>+
+<pluginParam name="textpds" type="file">textpds.conf</pluginParam>+
*<environment id="APP1">*
*+<envVariable name="REPORTS_PATH" value="/application1/reports"/>+*
*+</environment>+*
*+<environment id="APP2">+*
*+<envVariable name="REPORTS_PATH" value="/application2/reports"/>+*
+</environment>+
+</server>+
The environment ids you can choose yourself and you have to put them in there yourself too (here I put two environments for two different applications "1" and "2").
If you call a report from Forms, then you have to code something like
ADD_PARAMETER(p_list,'ENVID',TEXT_PARAMETER,'APP1');
Details depend on how you call your reports, my example is for using a parameter list and calling a report out of application1
Hope that helps.
Volker

How to set up the path for report in 10gAS?

I have a report which can be run in one folder A but not in the other folder B, both folder are included in the forms_path in default.env of AS. How can I set up the path for the report in AS so that the report server knows to look for the report in the folder B?

Hello,
If you don't specify the "full path name" for your reports, the file will be searched in the directories listed in REPORTS_PATH or in the directory specified in the property sourceDir
For more details :
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/envvars/envvar_reports_path.htm
and
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_conf.htm
Regards

How to set serial no in jasper report

Hi friends,
I am using jasper report in my application. In the table has 4 fields like code,name,address,phone number. If i generate the report i need to display the serial number like1,2,3.... for each record. I don't know how to set. So please help me.

You may use query as
declare @itemcodes nvarchar(2000)
select @itemcodes = ''
select top 200 @itemcodes = @itemcodes +
case when
charindex( 'ItemCode: ' + coalesce(T1.ItemCode,'Service'), @itemcodes) = 0 then
'ItemCode: ' + coalesce(T1.ItemCode,'Service') + ' '
else
end
+ case when T5.IntrSerial is not null then
', ' +
coalesce(T5.IntrSerial, '')
else '' end
FROM dbo.OINV T0
INNER JOIN dbo.INV1 T1 ON T0.DocEntry = T1.DocEntry
LEFT JOIN SRI1 T4 ON T4.BaseType=13 and T4.BaseEntry=T0.Docentry and T4.ItemCode=T1.ItemCode
LEFT JOIN OSRI T5 ON T5.SysSerial=T4.SysSerial and T4.ItemCode=T5.ItemCode
order by T1.itemcode
print @itemcodes
or use stored procedure and inside stored procedure throug cursor fill tmp table and as return make select as you need.

How to use Crystal Report Server with Crystal Reports for Eclipse

Hi,
is it possible to use Crystal Reports for Eclipse with the Crystal Report Server
like i can do it in Crystal Reports.
For Example open a Report file directly from the server edit and save there.
Thanks
Thomas

Yes, you can use the CR Server product in your Eclipse project. However, you will need to use the RAS SDK in your project instead of the CR4E SDK.
For more information about the RAS SDK, visit the DevLibrary.
http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm
-MJ

How to set formula field in crystal report

Hello all,
I develope the code in C#.NET and use SAP B1 2004C. I have a problem with crystal report. I have in crystal report one unbound field. This field is string type. I need in my code change value of this field to another text ex. ("test").
I use this code:
FormulaFieldDefinitions crFormula;
            FormulaFieldDefinition crFormulafieldD1;
            crFormula = crReportDocument.DataDefinition.FormulaFields;
            //FormulaFieldDefinition test;
            //bool test = crFormula.IsReadOnly;
            string error = "";
            bool isCorrect = true;
            crFormulafieldD1 = crFormula[1];
            string ahoj = crFormulafieldD1.FormulaName;
            crFormulafieldD1.Text = " ""+OP.ToString()+"" ";
            isCorrect = crFormulafieldD1.Check(ref error);
            // Display the error message if the syntax is incorrect.
            //if (!isCorrect) MessageBox.Show(error);
The value of the field is set, but on the report isnt it. Why not. Can you help me. Send some sample.
Thanks

Hi
I've never tried to change a field of the report directly. Maybe it would solve the problem if you make a parameter field, which you can use in the formula.
You can set then the parameter field:               report.SetParameterValue("NameOfParam", valueOfParam);
Regards,
Martin

How to set Excel Options using crystal reports 2008

Hi,
I am trying to figure out CR 8.5 (Crystal report control) Equivalents in Crystal reports 2008 using crystal report viewer in .Net but not able to find the exact replacments.
Properties used in CR 8.5
CRAXDRT.ExportOptions.ExcelUseWorksheetFunctions=True
CRAXDRT.ExportOptions.ExcelUseTabularFormat =True
CRAXDRT.ExportOptions.SetLogOnInfo(1,3,4,5)
Please let me know the replacements for the above mentioned properties in .Net using crystal report viewer (CR 2008)
Thanks in Advance
Regards,
Ramnath

Hello,
The code that has been provided is of Report Designer Component.
RDC has been deprecated in Crystal Reports 2008.
Use the 'ExcelFormatOptions' class. It provides many options regarding exporting in an excel format.
ExcelFormatOptions myExportFormatOptions = new ExcelFormatOptions();
Try exploring the Developer guide for Crystal Reports .NET SDK [here|http://www.sdn.sap.com/irj/boc/sdklibrary#section7]..

Crystal Report Server XI recurring report instance is not viewable

I have scheduled a report to be run every morning, and each instance return status is "success". However, I encountered the following problem when I try to view instances of the report: There is a long time period of waiting (seems to be waiting for some kind of timeout), and then eventually the message: "A request was cancelled. The necessary security privileges could not be verified. This indicates a problem with the security server."
I also noticed that in event viewer (windows server 2003) I see many failure audits to login to the sql database, and the events contain the login used in my data source.
It's interesting to note, that when I run a single instance of the report "Now" there is no problem.
Some info about the report which may be relevant:
The report uses 2 formula fields to auto-parameterize 2 of the 5 parameters used by a subreport. The other 3 subreport parameters are set when scheduling the report.
The subreport uses a call into a stored procedure in a MS SQL server 2005 database to retrieve its records.
The 2 fields which are parameterized are datetime fields (StartTime, EndTime), and the main report is basically just a wrapper to only show the previous day.
JDBC data source to local Sql server instance.
Also, the crystal report server XI install uses the same sql server instance to store CMS data under a separate database.
I'm stumped on this.
Has anybody encountered this problem?
Is there a simpler way to auto-parameterize the report?
Why are the failure audits occurring when I view the instance of the report? Is this because the instance is setup to use RPT output format?
Are there logs I can look into aside from event viewer? I can't find anything that looks relevant under program files, but perhaps I missed something.
The failure audits would make more sense to me if it occurred with the other report instances, but some instances are shown correctly, and some just do this timeout thing.

Hello AV,
please look for the log files here:
drive:install folder\businessobjectsenterprise11\logging
by default c:\program files\business objects\business objects enterprise 11\logging
Please make sure that tracing is switched on for the individual server.
Please find [online docu |http://help.sap.com/businessobject/product_guides/boexir2/en/xir2_crs_install_win_en.pdf]here
Falk

Where can i get the report server name in Reports 10g

Where can i get my report server name in 10G ?

Thanks ..
When i opened the bat file :
i did not find any report server name ...
This is my file :-
@echo off
REM $Header: rwdiag.bat 13-may-2005.03:21:21 sunaraya Exp $
REM
REM rwdiag.bat
REM
REM Copyright (c) 2005, Oracle. All rights reserved.
REM
REM NAME
REM rwdiag.bat - rw diagnostic tool
REM
REM DESCRIPTION
REM Script to run the diagnostic tool used to locate servers / monitor packets on the network
REM
REM NOTES
REM Usage: rwdiag.bat -find <server name> | -findAll [-conf <config file>] [-timeout <timeout in sec>]
REM
REM Usage: rwdiag.bat -monitor [-log <logfile>] [-conf <config file>]
REM
REM MODIFIED (MM/DD/YY)
REM sunaraya 05/13/05 - Added rwrun.jar to the classpath for bug 4361664
REM sunaraya 04/22/05 - Provided execute permission to the script for bug 4323789
REM sunaraya 04/14/05 - sunaraya_bug-4221172
REM sunaraya 04/14/05 - Creation
REM
set ORA_HOME=C:\ORANT
if "%ORA_HOME%"=="" goto ERROR
set CLASSPATH=%ORAHOME%\jlib\zrclient.jar;%ORA_HOME%\reports\jlib\rwrun.jar
%ORA_HOME%\jdk\bin\java -DORACLE_HOME=%ORA_HOME% -classpath %_CLASSPATH% oracle.reports.utility.DiagServerLocator %*
goto END
:ERROR
echo "ORACLE_HOME is not set"
echo.
:END

Crystal Reports Server 2008 - Scheduling Reports Best Practice

What is the best practice for scheduling a report that will be distributed to approximately 30 recipients? I have uploaded a report that has a single parameter for the physician's name. I need to distribute this report on a daily basis to each physician using their name as the parameter. Should I right-click on the single report that is uploaded and schedule the report with the corresponding parameter and physician e-mail address, or should I create 30 reports each with the physician's name. Basically, I need a way to see all of the scheduled jobs for a given report? Is this possible in Crystal Reports Server 2008? Thanks.

The way that I handle all of our scheduled reports is to create the report with parameters to cover all of the necessary variations of the same basic report. For you, that's be a single report with the doctor's name (or other identifier) as a parameter. I then create an Object Package (I use BOE, so I'm not positive if CR Server has them, but I'd guess so...) for each variation (doctor in your case), and copy the report into the package. I then set up the destination and schedule for the package, and set the parameter(s) of the report. Then, schedule the package to run.
The advantage of using object packages is that it separates the schedule and distribution from the actual report, so if (or I should say, when :->) the report changes, you don't have to copy the schedule and destination to the new version of the report, saving time and reducing errors. Just copy the new version into the package, set the parameters, delete the old version, and reschedule the package to run.
HTH,
Carl

How to set report server to process 2 reports concurrently?

Similar Messages

Maybe you are looking for