How to set sectionindextitlefortableview without reloading tableview

Hi,
i want to set sectionindextitlefortableview to nil in some case.I mean at first i will display that indexing then in some case i will have to remove that indexing with out reloading the table...Please help me out....

Have you tried reloadSectionIndexTitles?
\- Ray

Similar Messages

  • How to set RVS4000 without browser

    How can change some of the settings of RVS4000 (port forwarding or virtual server for example) without browser under linux. I would like to set new virtual server automatically, when I (some of the process) see that the current server is down. For example port 80 is forwarded to 192.168.1.2, and how to set on 192.168.1.3 on linux box without  X ?

    Magic
    I don't think it can be done for an initial setup. You would ultimately have to setup telnet to the box and then it would probably be doable. However, this would be rather difficult. Seems easier to boot to X (kde/ whatever you like) and setup the router that way using firefox. I do believe there are other ports open but I must confess my ignorance of linux on this topic.
    Bottom line. Telnet/SSH (for security of course) is not enabled and it is designed to be managed via the web interface.
    Bill

  • How to set up without reformatting disk?

    Hi There, When I try to run Boo Camp Assistant on my Macbook 10.5.6 It tells me that it "The disk cannot be partitioned because some files could not be moved...use Disk utility to formate as a single Mac OS extended (Journaled) Volume, restore your information to the disk and try Boot Camp Assistant again" I'm nervous about doing that. Is there any safer work around? Thank you, Joanna.

    Hi,
    if you trust iDefrag http://www.coriolis-systems.com/iDefrag.php enough, you might wanna buy.
    But the backup/restore approach is usually cheaper and IMHO more trusty.
    Regards
    Stefan

  • How to display the search result without reloading the whole page

    HI,
    I have separate fragments for Search Box to enter keyword and Search Result to display the result. Also I have different sections within the page to put these fragments. So how could I display the results without reloading the whole page.
    Also if I have next button in my search result area, how could I display the search results in next page without reloading all other sections present in our page. Please let me know if any service or idoc function present such that result could be shown in search result section without reloading whole page.
    Please let me know how to restrict page reload for every action within a page.
    Thanks,
    Ramesh
    Edited by: Ramesh_Est on May 27, 2010 3:14 AM
    Edited by: Ramesh_Est on May 27, 2010 8:39 PM

    This is default behaviour of the template of your space. You can create a new page template and than you can create a region for the search results.
    Or you can create a custom taskflow were you use the webcenter taskflows to search for the space.
    Take a look at this white paper:
    Extending webcenter spaces: http://www.oracle.com/technology/products/webcenter/pdf/owcs_r11_extend_spaces_wp.pdf
    and this one:
    Customizing site templates: http://www.oracle.com/technology/products/webcenter/pdf/owcs_ps1_site_template_wp.pdf
    Edited by: Yannick.O on 13-Apr-2010 02:32

  • How to set up Group Policy without any server installed

    How to set up Group Policy on Win8 without any server installed?
    I have set up 50 users on LAN and want to push softwares via one common point. From google I found to deploy Software using Group Policy. But then Group Policy occurs in Servers and I don't have any server set up.

    Hello,
    a Domain requires at least one Windows server OS machine which has Active Directory installed.
    As previous already mentioned from SenneVL this also requires that computers are added to the domain and that you create user accounts in Active Directory users and computers which stores the account information in the Active directory database.
    In your case with single computers each machine has its own database(SAM) which stores passwords etc. this is different in a domain.
    Each computer has a local policy which will be overwritten from centrally managed policies from the domain.
    "The common point would be my PC (Admin PC) ."
    This machine can not be used for your needs with software installation for 50 computers.
    "How To Use the Group Policy Editor to Manage Local Computer Policy."
    This is about the local machine and you cannot manage them for other computers from your Admin PC.
    "DOMAIN part: By default Microsoft takes everyone on Workgroup. Is that not a default DOMAIN? or should I make one lets say "ABC" on every PC ?"
    NO, this is NOT a domain.
    http://windows.microsoft.com/en-us/windows7/what-is-the-difference-between-a-domain-a-workgroup-and-a-homegroup
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://blogs.msmvps.com/MWeber
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Twitter:  

  • Without to change the setting.how to set the decimal place to 7 for an UDF.

    Without to change the setting, how to set the decimal place to 7 for an UDF?

    Hi
    Once you create a UDF it will automatically be binded to the data source of data type that you gave at the time of creating UDF.
    So i think you can not set the decimal places without changing the setting in display parameters.
    i am not sure whether it will work or not one thing you can try is that create it as a alphanumeric data type and convert your decimal value to sting and then assign it to UDF,While retrieving for any manipulation you convert it as decimal.
    Hope it helps you
    Regards
    Vishnu

  • How to get Value of tree node without Reload Page

    hi,
    i worked with apex 4.2 and i created Tree and tabular form to retrieve the date according the value of tree select node the code of tree something like this
    select case when connect_by_isleaf = 1 then 0
    when level = 1 then 1
    else -1
    end as status,
    level,
    "ENAME" as title,
    null as icon,
    "EMPNO" as value,
    null as tooltip,
    'f?p=36648:34:5234984107903::::P40_SELECTED_NODE:'||empno as link
    from "DEPT"."EMP"
    start with "MGR" is null
    connect by prior "EMPNO" = "MGR"
    order siblings by "ENAME
    and i put Selected Node Page Item: P40_SELECTED_NODE . the tree worked good and retrieve the data into tabular form according to tree node value
    my Question :
    1- i want to retrieve the data without submit the page where each time i select value from tree make page reload to update the tabular form with new value ,there is any way to pass the value of tree node to P40_SELECTED_NODE item and refresh tabular form without page reload .
    2- i want when selected from tree run page process according to value of tree node i tray to create Dynamic action with *(jquery selector : div.tree li>a)* but the Value of node incorrect.
    Regards
    Ahmed;

    look at this link
    Re: How to get Value of tree node without Reload Page ..!

  • How to set air port extremem 802.11n without cd?

    How to set air port extremem 802.11n without cd?

    What computer do you have?  What operating system is it using?

  • HT1226 how to add security key to airport extreme that was set up without? a key?

    How can I add a security to my airport extreme that was set up without one?

    ArmlockU wrote:
    Will have to have re-set up my airport express or will the extreme just work with the express? I have the express locked down and I thought about unlocking the express? What would I do to set this up? Any help I would greatly appreciate it!!!
    You should set up the Extreme as your main router and eventually the Express to stream music or to extend the wireless.
    After the Extreme is set up and running, just set the Express e.g. to "Join a wireless network".
    Alternatively reset the Express to factory default (see manual) and configure it from the scratch to your needs.
    Lupunus

  • HT2534 My iTunes does not offer the "none" in the payment type option.  Any suggestions as to how to set up account without a credit card?

    I was following article http://support.apple.com/kb/HT2534  -- it instructs me to select 'none' for payment type.
    I (my teen) do not have a credit card.  I want to download free apps and use gift cards to purchase music.
    Any suggestions as to how to set up account without credit card?
    Thank you,

    Did you follow, exactly, the instructions on the HT2534 page when creating the account ? I've just tried it on my Mac's iTunes and the instructions still work e.g. find a free app in the store, click on its free 'price' button, and on the popup click on 'create apple id' - when you get to the payment details screen you should see the 'none' option.
    Creating an account with 'none' : http://support.apple.com/kb/HT2534

  • HT2534 I followed the instructions on how to set up an Apple ID without using a creditcard or iTunes card many times on several devices, but I still do not get the NONE option on the billing page. Please help??

    I followed the instructions on how to set up an Apple ID without using a creditcard or iTunes card many times on several devices, but I still do not get the NONE option on the billing page. Please help??

    Follow the steps on this page when creating a new account http://support.apple.com/kb/HT2534
    e.g. if using a computer's iTunes : https://discussions.apple.com/message/24321860
    If you've already created an account and are being prompted to review it when trying to see it then you could see if this post by mountaingoatgirl lets you do so without needing to enter credit card details : https://discussions.apple.com/message/24303054

  • I don't know how to set up closingFirefox to have all open tabs next time when I open it, without calling RESTORE PREVIOUS SESSION

    Question
    I don't know how to set up closingFirefox to have all open tabs next time when I open it, without calling RESTORE PREVIOUS SESSION

    Tools > Options > General
    :At the top '''When Firefox starts:''' Show my windows and tabs from last time
    You can still bring up your home page later.

  • How to send information from HTML page to JSP without reloading HTML page?

    Hello,
    Is it possible to send information(row number selected by user) from HTML page to JSP without reloading HTML page?
    Thanks.
    Oleg.

    Yes, you can do this with framesets and a hidden frame.
    You need a bit of JavaScritp in the "visible" frame that
    sets the location of the hidden frame to the JSP.
    Add the user's choice as a parameter to the JSP URL.

  • Once and for all: How to set up and use SSH

    Yes, I know ssh has been discussed on and off, but never in its entirety; and yes, there are step by step instructions on the www, but at one point or another they skip a crucial instruction that would be necessary for unix-dummies (e.g. how to save and close the nano-editor in Terminal). So, please pardon my question:
    There are several points I'd like to ask for ssh-connecting two macs on a local network:
    1) In terminal-file-"connect to server" you can ask for an ssh connection to be set up. For this to work, do I need to create private and public keys first? If so, how? Please point me to a reliable and step-by-step instruction site.
    There are some free ssh-utilities out there, but their documentation is just not helpful enough for a UNIX-dummy.
    2) Apparently I managed to connect via ssh once (from the terminal, see point 1) to a local server (allowing remote connection set to ON at the server). But then, when I connected to that server from the client's finder and tried to get into my user account on that server it told me that no secure connection could be established. What's wrong here? Do I have to continue working from within the terminal to use this connection? That would be difficult for an average MacUser.
    3) What is the security advantage of an SSH connection on a local wireless network (Airport Base Station) over WPA2, if at all?
    4) And how to set up an ssh-connection over the internet cloud to safely build a remote control/desktop sharing connection, e.g., a friend's Mac when she has a problem?
    Thanks for your consideration.

    First I'm not sure what your goals are.
    1) In terminal-file-"connect to server" you can ask for an ssh connection to be set up. For this to work, do I need to create private and public keys first?
    If you have ssh keys, you can do this without passwords. If you have not exchanged keys with the remote system, you will be asked for the password of the user you are attempting to login as.
    If so, how? Please point me to a reliable and step-by-step instruction site. There are some free ssh-utilities out there, but their documentation is just not helpful enough for a UNIX-dummy.
    Log into the remote system. This could be via ssh.
    On the remote system, run the following command to generate an ssh key for that remote system:
    ssh-keygen -t rsa
    Generating public/private rsa key pair.
    Enter file in which to save the key (/Users/username/.ssh/id_rsa): <<take default>>
    Created directory '/Users/username/.ssh'.
    Enter passphrase (empty for no passphrase): <<enter nothing>>
    Enter same passphrase again: <<enter nothing again>>
    Your identification has been saved in /Users/username/.ssh/id_rsa.
    Your public key has been saved in /Users/username/.ssh/id_rsa.pub.
    The key fingerprint is:
    aa:bb:cc:dd:ee:ff:gg:hh:ii:jj:kk:ll:mm:nn:oo:pp [email protected]
    This will generate an ssh key for the remote system. This could be any system that support ssh, such as a Unix system, or another Mac.
    Copy the id_rsa.pub file from the remote system to your Mac. When I say "your Mac" I mean the one that you want to make the ssh connection from. The id_rsa.pub is found in the remote system's ~username/.ssh/ directory.
    Append the copied id_rsa.pub to your Mac's ~himbear/.ssh/authorized_keys2 file
    cat id_rsa.pub >>~himbear/.ssh/authorized_keys2
    Now when you ssh to that specific remote system, it will NOT ask for a password. The first time you ssh to any system, ssh will ask if the system is really the system you thing it is. But once you say "yes", it will not ask that question again.
    Repeat for every remote system you wish to log into using an ssh key.
    2) Apparently I managed to connect via ssh once (from the terminal, see point 1) to a local server (allowing remote connection set to ON at the server). But then, when I connected to that server from the client's finder and tried to get into my user account on that server it told me that no secure connection could be established. What's wrong here? Do I have to continue working from within the terminal to use this connection? That would be difficult for an average MacUser.
    MacUser. A flash from the past, as in the MacUser magazine.
    ssh is not used by default when you make connections. If you want an ssh connection, you have to establish it intentionally.
    ssh can be used to pre-establish a tunnel (or tunnels) that other services can use. Once an ssh tunnel is establish, connections to local host's tunnel port will be connected to the specified remote port. For example:
    ssh -L 5901:localhost:5900 [email protected]
    will establish a tunnel that VNC can use. The VNC client would connect to localhost display 1 or port 5901.
    ssh allows multiple -L tunnels to be specified on the ssh command line.
    3) What is the security advantage of an SSH connection on a local wireless network (Airport Base Station) over WPA2, if at all?
    Inside you home. Not much. Unless of course you do not trust the other members of your family. That is to say, others having your WPA2 password, and are thus on the inside, and can sniff you packets.
    4) And how to set up an ssh-connection over the internet cloud to safely build a remote control/desktop sharing connection, e.g., a friend's Mac when she has a problem?
    If you are using the Mac OS X Leopard built-in *Screen Sharing* and you are connecting to another Mac's built-in Leopard System Preferences -> Sharing -> Remote Management (Tiger's Apple Remote Desktop), then in the *Screen Sharing* preferences, is an "Encrypt all network data" option.
    If you wish to set this option in advance, you can launch *Screen Sharing* by double clicking on System -> Library -> CoreServices -> Screen Sharing.app
    You can *Screen Sharing* connections over the net using iChat. This is one of the easiest ways to take control of their system. Of course they need to cooperate. I use a Free AOL Instant Messager (AIM) account for my iChat connections. And as a side benefit you can text, audio chat and/or video chat with the person at the other end.
    If you are NOT using the build-in Mac OS X *Screen Sharing* and/or you are NOT using the build-in remote Mac OS X remote management server, then this is a situation where an ssh tunnel would be a very good idea.
    However, setting up an ssh tunnel between 2 systems across the internet gets complex.
    In this case you might want to consider using something like LogMeIn.com which will deal with all those nasty home routers without needing to to do nasty router configurations, and it will be a secure connection. LogMeIn.com will not be as fast as a *Screen Sharing* connection or a VNC connection, but it will be secure and easy to establish. Again, this is only if you can not to Mac to Mac *Screen Sharing* using built-in Mac OS X remote desktop.
    Now if you want to roll your own ssh tunnels for VNC, then I'm just going to outline the things you need to do.
    If the remote system is behind a home router, you need to configure that remote home router to "Port Forward" port 22 on the Internet side to port 22 on the target Mac. Bonus points if the internet side using a high number port to discourge net bots from knocking on your door. Use the ssh -p 12345 option to connect to the high numbered port that is forwarded to port 22 of the destination Mac.
    On the remote Mac you need to run a VNC server. If this is a Mac, then Leopard System Preferences -> Sharing -> Remote Management (Tiger's Apple Remote Desktop). If it is not a Mac, then for Windows, TightVNC, UltraVNC, RealVNC are possible options. Linux has a built-in vncserver, or you can install x11vnc which has the advantage of displaying the desktop screen.
    Once you can access the remote system, you use an ssh command like the following:
    ssh -p 12345 -L 5901:localhost:5900 remote.system.address
    You can get the remote system's address by having the remote system surf over to http://whatismyip.com. Then they can tell you the IP address.
    If you are going to be doing this a lot, you can get a free no-ip.com or dyndns.org dynamic DNS name for the remote system, and the remote system can run a dynamic DNS client (available from no-ip.com or dyndns.org) which will keep the dynamic DNS name updated as the remote person's ISP change's their IP address.
    Finally, now that you have an ssh tunnel for VNC traffic, you have your VNC client connect to
    Address: localhost
    Port: 5901
    Depending on your VNC client you may need to specify Display 1 instead of Port 5901. Or if you do not get a Display or Port option you specify localhost:5901

  • How to set up roaming profile on Macs using AD like in windows

    I can bind the workstations to the domain fine.. But can someone direct me to instructions of how to set up the roaming profiles ?
    What steps do I need on the server ? This is what I've done so far.
    I already have OU's for the departments and the users have a shared folder inside their department folder.... \\server\shared_folder\user
    I have done the usual things with AD as far as the profile settings on the windows server.
    Am currently running Mac OS 10.5 and above
    My windows AD runs on windows server 2008
    All my windows workstation are able to use roaming profile without a problem.
    So far i have tried the so many avenues including..
    Make sure the Mac systems are joined to the domain controller and an ADS user can log on successfully. Use "Directory Utility" under "Utilities" menu to join the system to the domain.
    Backup all the contents from /Users to the storage or somewhere locally.
    Configure automount - Go to "Utilities" -> "Directory Utility" - Select the domain and click "Show advanced options" - Click "Mounts" tab and add automount as mentioned below. Remote NFS URL: nfs://server_name/share_name/path/to/profile/directory Mount location: /Users Additional mount parameters: -P,-T Apply the settings and this will mount the remote shared folder or we can name it as Roaming Profile Space - under /Users directory
    Enable roaming profile - Go to "Utilities" -> "Directory Utility" - Select the domain and click "Show advanced options" - Click "Services" -> Select "Active Directory" and click "Show advanced option" - Click "User experience" tab and select the option "Create mobile account at login".
    Reboot the system and log in as any ADS user. The Roaming shared folder will be mounted and the user profile will be created on the shared folder
    Can anyone kindly assist me

    Hi Guys, anyone with the Soln...or Tips..Am waiting

Maybe you are looking for