How to set the margin between panel?

i have added four panels to a frame by borderlayout, however, i think that they are too close together...
any method that can be used, such that i can increase the margin between four panels?
thx

thx u ...
however, it just increase the margin between the four
panels, how can i increase the margin
between the panel and the frame?
thx u again..JPanel contentPane = new JPanel(new BorderLayout(4,4));
// next line answers question above
contentPane.setBorder(BorderFactory.createEmptyBorder(4,4,4,4));

Similar Messages

How to set the margin of a jtextfield when using standard lineborder

Hi,
I want to give my jtextfield a custom inset. The problem is that I also use a lineborder which controls the inset, thus when I try to the setMargin method, it doesn't work.
Can anyone tell me how to do this?
Much thanks
Hugo Hendriks

hello,
try to use a compoundborder and add the lineborder and an emptyborder to it. by setting the emptyborders insets you can control the jtextpanes insets.
i hope that one works =)
bye

How to set the margins for the pdf output in BI Publisher

Hi There,
When we view a report in PDF format in BI Publisher, we get pdf output in an iframe.
There are two scroll bars on the right side. When we scroll down the outer scrollbar to the bottom, there is a white space between the bottom border of the pdf report and bottom portion of the window.
We are calling BI report from apex by passing the url of the report. In this case the white space at the bottom is quite evident and seems that lot of space is being wasted.
Can somebody help me, how to remove or minimize this white space.
Thanks
Krishna
Edited by: Yogi on Aug 30, 2010 5:41 PM

Hello,
open your report for editing, so you see the page with your layouts. Then click on the Link "Show as List" on the upper right. In the List of the output formats select "FO Formatted XML". This enables FO Export.
Then execute your report, click on the small menu item at the upper right. The Menu opens, select Export -> FO.
Hope that helps.
Greetimgs,
Sascha

How do I set the margins for a book in ibook author

I am fairly new to Ibooks author and am having trouble figuring out how to set my margins to follow throughout the book. I am making the book in landscape mode and want the hardcopy version to be 11 x 8.5. I need the left margin to be set at 2.5 and no matter what I have done it skews the following pages. I will publish this online but since this is going to be a family history book, I am going to have to export it eventually to PDF and send it to a printer. Does anyone know how to change these settings?

Thank you. I just like the possibilities associated with Ibooks author. But I will do that and maybe later transfer that data to Ibooks.
Thanks again.

How to make the LV front panel controls the current value through the program is set as the default value when the next time you open?

How to make the LV front panel controls the current value through the programis set as the default value when the next time you open?
1110340051

Try this: Re: How to make a VI remember the latest control value?
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice

How can i set the space between two button?

Hello,
I have
<mx:HBox>
<mx:Button label="one" />
<mx:Button label="two" />
</mx:HBox>
how can i set the distance between this two compotents?
Thanks

quote:
Originally posted by:
robinbouc77
Hi,
you can use horizontalGap property on HBox to change the
space between your buttons. I think the default value is 6. You can
also use <mx:Spacer/>, but changing the gap on HBox is
probably the cleanest way ;)
C U
perfect!!! works fine

How do I set the transition between access points would be fine?

Hello everyone,
We have an organization Wirless controller 2504 with 20 aironet access-point (700 series)
Once I defined all the access points I noticed that the transition between them is not working fine...
I mean that clients can not walk around in our organization without having to connect to any access point separately.
How do I set the transition between access points would be fine?
Thanks a lot (:

HI Omri,
which software version you have on WLC ?
Is the site survey done propely ?
Remember: It is the client that decides when to roam and which AP to connect to based on what it perceives the signal to be.
If your site survey design is perfect and still have problems while roaming then:
Disable your lower data rates on the 2.4ghz and or 5ghz radio and your clients will roam better. Try to disable everything below 11mbps. and give that a try.May be old device will work in this case.
Regards
Dont forget to rate helpful posts

How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS

Hi
I have read the article on SDN called "How to Set Up SSO Between IBM WebSphere and SAP EP Using JAAS", which is also the name of my posting.
The reason why I post this is that I've tried to follow the links in the PDF to get the file WebsphereEpSsoLib.zip but I get an error 403, which tells me that the file is not there.
Does anybody know where this file went or can somebody tell me an alternative place to get this file?
Jacob

Please open the associated whitepaper, and you can find the download link to the .ZIP file on page 4.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ibm/how to set up single sign-on between an ibm websphere portal and the sap enterprise portal using jaas.pdf
Hope that works!
Elise

How to create the relationship between ESSBASE 11 and DM in OBIEE11

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok.
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

How to create the relationship between ESSBASE 11 and DM in OBIEE 11G?

Hi Experts,
I have one requirement that there is one property table named 'Store Master' in DW,and it contains a lot of attribute, such as Open Date, Close Date, IS 24 Hour etc.
But another data source is essbase and based on this source, I create all reports.
In ESSBASE, it has one dimension and hierarchy Location, and it has four level, Country(L1),Region (L2),Province(L3),Store(L4)
So I want to know how to create the relationship between Location (ESSBASE) and Store Master (DM).
I try to create one relationship in physical layer between Gen4,Location and Store, then drag the open date and close date into Location Dimension in BMM,then Presentation Layer.
When I drag column 'Open Date' ,'Gen4,Location ' and 'Sales' into reports, it will generate the following error message:
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Dim Region.Store Open Date. (HY000)
However, when I remove the column 'Open Date'. it will be ok
So what I missing the steps? Please help me. Thanks.

>
'2. Now, pull the 'Store' column from relational DB onto the Gen5, Location column from Essbase. This action now creates, two logical sources for your 'Store' column.'
If the length from different data source is not same,such as 1001(DM),L_1001(ESSBASE), can I drag the 'Store' column from relational DB onto the Gen5, Location column from Essbase?
I think it does not work.Right?Hi,
I am not sure if you are talking about the length(as in varchar(128)) of the member value being different in different sources, or the member itself is different in both the sources.
I am still assuming, that you are referring to the members not same in both the sources.If it is, the whole concept of federation is based on conforming dimensions. So, it needs that the same dimension information is present in both the sources and then only, you know we can analyze the numbers based on this dimension. So, either the dimension being different in both sources, or the members not present in both the dimensions might lead to incorrect numbers.
So I select Store Attributes in relation DB and Location in ESSBASE in physical layer, then create the physical join, such as right("Hour Sales"."H_Sales".""."H_Sales"."Gen6,Location",4) = "Authorization".""."EDW"."T_EDW_MDM_STORE"."US_CODE", then drag the OPEN_DATE and CLOSE_DATE in relation DB to Location in ESSBASE in BMM,finially drag them into presentation layer.We create physical layer relationships, to send over the same relation to the underlying database during querying. So, creating a physical relationship between essbase cube and relation database would not help here.
When you set up this federation, BI Server sends individual queries to each source and maps the conforming dimension members internally.
Hope I was clear, and this helps.
Thank you,
Dhar

How to set the parameter

hi i am creating xml publisher and from OAF with parameters
cusname:
runreportdate:
go clear buttons
click go open report in pdf
SELECT hp.party_name CustomerName,
csi.incident_number SRNumber,
to_char(csi.incident_date,'DD-MON-YYYY') SRDate,
to_char(csi.close_date,'DD-MON-YYYY') SRCloseDate,
mtl.description SRItemName,
csi.summary Summary,
csi.problem_code,
csi.incident_address SRAddress,
csi.INCIDENT_COUNTRY SRCountry,
'31-DEC-2008' Reportrundate,
COUNT ( * ) over () cnt,
cis.name,
COUNT(
CASE
    WHEN cis.name='Low'
    THEN 1
END) over () Low,
COUNT(
CASE
    WHEN cis.name='Medium'
    THEN 1
END) over () Medium,
COUNT(
CASE
    WHEN cis.name='High'
    THEN 1
END) over () High1,
to_char(csi.incident_date,'MON-YYYY') SrMonth
FROM hz_parties hp,
hz_cust_accounts hca,
hz_contact_points hc,
cs_incidents_all_b csi,
ar_lookups arl,
cs_incident_severities_b cis,
mtl_system_items_kfv mtl
WHERE hca.cust_account_id   =csi.account_id
AND hp.party_type          IN ('PERSON','ORGANIZATION')
AND hp.status               ='A'
AND hp.party_id             = hca.party_id
AND hca.status              ='A'
AND hp.party_id             =hc.owner_table_id(+)
AND hc.owner_table_name(+) ='HZ_PARTIES'
AND hp.party_id             =hca.cust_account_id
AND hc.contact_point_type(+)='PHONE'
AND hc.primary_flag(+)      ='Y'
AND hc.status(+)            ='A'
AND arl.lookup_type(+)      = 'PHONE_LINE_TYPE'
AND arl.lookup_code(+)      = hc.phone_line_type
AND hp.party_name='Business World'
AND csi.incident_date BETWEEN to_date('01-JAN-2000','DD-MON-YYYY') AND to_date('31-DEC-2008','DD-MON-YYYY')
AND cis.incident_severity_id=csi.incident_severity_id
AND mtl.inventory_item_id=csi.inventory_item_id
GROUP BY hp.party_name,
csi.incident_number,
csi.incident_date,
csi.close_date,
csi.summary,
csi.problem_code,
csi.incident_address,
cis.name,
csi.INCIDENT_COUNTRY,
mtl.description,
to_char(csi.incident_date,'MON-YYYY')
Am code
    public void initQuery(String paramString1, String paramString2)
          SrReportVOImpl vo=getSrReportVO1();
        if ((paramString1 != null) && (!("".equals(paramString1.trim()))) && (paramString2 != null) && (!("".equals(paramString2.trim()))))
          vo.setWhereClauseParams(null);
          vo.setWhereClauseParam(0, paramString1);
          vo.setWhereClauseParam(1, paramString2);
          vo.executeQuery();
    public XMLNode getPrintDataXML()
    //SrReportVOImpl vo=getSrReportVO1();
    OAViewObject vo = (OAViewObject)findViewObject("SrReportVO1");
    //vo.initQuery(s,s1);
    XMLNode xmlNode=(XMLNode) vo.writeXML(4,XMLInterface.XML_OPT_ALL_ROWS);
        return xmlNode;
CO code
      SrAMImpl am=(SrAMImpl)pageContext.getApplicationModule(webBean);
      if(pageContext.getParameter("Go")!=null)
          //am.searchSrDetails(pageContext,webBean);
           String s=pageContext.getParameter("CustomerName");
           String s1=pageContext.getParameter("RunReportDate");
               am.initQuery(s,s1);
             // Get the HttpServletResponse object from the PageContext. The report output is written to HttpServletResponse.
             DataObject sessionDictionary = (DataObject)pageContext.getNamedDataObject("_SessionParameters");
             HttpServletResponse response = (HttpServletResponse)sessionDictionary.selectValue(null,"HttpServletResponse");
             try {
             ServletOutputStream os = response.getOutputStream();
             // Set the Output Report File Name and Content Type
             String contentDisposition ="attachment;filename=ServiceReport.pdf";
             response.setHeader("Content-Disposition",contentDisposition);
             response.setContentType("application/pdf");
                 Serializable param[]={pageContext.getParameter("CustomerName"),pageContext.getParameter("RunReportDate")};
                 System.out.println("hiiii 12");
                 // Get the Data XML Output as the XMLNode
                 XMLNode xmlNode = (XMLNode) am.invokeMethod("getPrintDataXML",param);
                 System.out.println("hiiii 13");
                 System.out.println(xmlNode.toString());
                 System.out.println("hiiii 14");
             // Get the Data XML File as the XMLNode
             ByteArrayOutputStream outputStream = new ByteArrayOutputStream();
             xmlNode.print(outputStream);
             ByteArrayInputStream inputStream = new ByteArrayInputStream(outputStream.toByteArray());
             ByteArrayOutputStream pdfFile = new ByteArrayOutputStream();
             //Generate the PDF Report.
             TemplateHelper.processTemplate(
             ((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getAppsContext(),
             APP_NAME,
             TEMPLATE_CODE,
             ((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getUserLocale().getLanguage(),
             ((OADBTransactionImpl)pageContext.getApplicationModule(webBean).getOADBTransaction()).getUserLocale().getCountry(),
             inputStream,
             TemplateHelper.OUTPUT_TYPE_PDF,
             null,
             pdfFile);
             // Write the PDF Report to the HttpServletResponse object and flush.
             byte[] b = pdfFile.toByteArray();
             response.setContentLength(b.length);
             os.write(b, 0, b.length);
             os.flush();
             os.close();
             pdfFile.flush();
             pdfFile.close();
             catch(Exception e)
             response.setContentType("text/html");
             throw new OAException(e.getMessage(), OAException.ERROR);
             pageContext.setDocumentRendered(false);
               System.out.println("hiiii 13");
      if(pageContext.getParameter("Clear")!=null)
          am.ClearFields(pageContext,webBean);
      }can any one tell me how to set the bind parameters or setting parameter

Hi,
Could not understand your problem exactly. DId you try adding bind variables in the query like below:
AND hp.party_name='Business World'
AND csi.incident_date BETWEEN to_date('01-JAN-2000','DD-MON-YYYY') AND to_date('31-DEC-2008','DD-MON-YYYY')
change to
AND hp.party_name=:1
AND csi.incident_date BETWEEN :2 AND :3
Please note you will need three bind variables. Second and third for SR Dates.
~Amol

How to set the value of a variable in a cluster in LabVIEW from C#?

Hi guys, I'm working on a small c# program, which using the interface provided by LabVIEW. And I know that, using lv.SetControlValue(name, value) can set a variable just on the front panel. But in my case, there're several clusters on the front panel. So it confused me how to set the variables in these clusters. For example there's a cluster named clusterA, and a variable in it named valueA, I've tried something like this:
lv.SetControlValue("clusterA.valueA",1);
but it totally not work. Anyone has some experience about this stuff? Thanks a lot!!
Solved!
Go to Solution.

Hey guys, thanks a lot for all your reply. I just find a simply way to solve this porblem. For example, there a cluster named "ClusterA", and there are only two control values in it, which are: an int value named "IntA" (default value IntA = 10)and a string value named "StringA" (default value StringA = "abc"). In C# if you invoke the method:
var clusterA = (Array) vi.GetControlValue("ClusterA");
you will get an Array looks like: clusterA = {10, "abc"}; Then if you want to change IntA to 123, you just need to do:
clusterA.SetValue(123, 0); // 123 is the value, 0 is the index of IntA in the array clusterA, after this clusterA = {123, "abc"}
After this, you just need to give the array back to LabVIEW by using:
vi.SetControlValue("ClusterA", clusterA);
and now see the panel in you LabVIEW, the IntA is changed.

How to set the extra component to horizontal scrollbar position

How to set the component to position of horizontal scrollbar , that position contain two component horizontal scrollbar and any component (JButton , JLabel ) like that.. Ms-Word scrollbar ,
Like that bellow fig.


{font:'Times New Roman'}{size:12pt}<img src="file:///C:/DOCUME~1/ADMINI~1/LOCALS~1/Temp/msohtml1/04/clip_image002.jpg" alt="" width="485" height="27" />{size}{font}
How to design ?

pradeep.rajadurai wrote:
I want set the JTable as a background of jframe or jinternalframe , how it is possible One way that may work, you can always extract the image from a rendered JTable and then paint the same image into the JPanel that holds your components via it's paintComponent method, then added the JPanel to the app's contentPane.
give me simple pgmIs English your second language? Because if so, please understand that this demand can be taken by some as rude.

How to set the width for a selectManyShuttle component

Hi,
I'm using selectManyShuttle component from Oracle ADF Core and some of the items in the showing list are long, therefore the width of selectManyShuttle expands the page. How to set the width property for selectManyShuttle component? After that does selectManyShuttle provide horizontal scrollbar as well?
Thanks in advance,
lapi
Message was edited by:
[email protected]
Message was edited by:
[email protected]

Solution here:
Re: ADF Faces Scrollable Panel or Scroll Bar inside a component
Regards
Grant

HOW TO SET THE OUR OWN LINE SPACING ?

hai frenz...
i jus wanted to know how to set the our own spacing between the records or lines...
i.e.,
there shub be no spacing between the records when its getting displayed...
for e,g.,
actually my records are in the output screen displaying like this.....
hyundai   100    200
maruthi    100   300
tata         200    200
but i want to be displayed like this...
hyundai   100    200
maruthi    100   300
tata         200    200
how to do that........ reply me....

Hi,
Use SKIP Abap Statement
SKIP 2.
SKIP TO LINE 1.
SET BLANK LINES {ON|OFF}.
Example
REPORT demo_skip NO STANDARD PAGE HEADING.
DATA sum TYPE i.
TOP-OF-PAGE.
SKIP.
ULINE.
START-OF-SELECTION.
DO 10 TIMES.
    WRITE / sy-index.
    sum = sum + sy-index.
ENDDO.
SKIP TO LINE 1.
WRITE: 'Numbers with sum' COLOR COL_HEADING,
          sum               COLOR COL_TOTAL.

How to set the margin between panel?

Similar Messages

Maybe you are looking for