How to set up and test the Basic Authentication for HTTP protocol

Hi,
I tried configuring the password based Basic Authentication for sending xml document using ebMS - HTTP protocol. I set username and password while configuring the transport server for both trading partners. I want to know, is that sufficient for basic authenticaton. When I open the URI http://localhost:7778/b2b/transportServlet, it is not asking any authentication (username/password). Please note that I have not used SSL certificate. Anyone please help me out to configure Basic authentication.

Hi Ramesh,
Thanks for ur response. Could you please tell me where to set the Additional Transport header : authtype-basic#realm=myRealm(in which property file). In enqueue code, I could see the following attributes
queue
msgID
replyToMsgID
from
to
eventName
doctypeName
doctypeRevision
msgType
payload
attachment
subscriber
Is it possible to set username/password in the enqueue attributes?
Do i need to add username/password and Transport header in the input XML and defined that elements in xsd?

Similar Messages

How do I set up and use the TV tuner for an ENVY 23 TouchSmart?

How do I set up and use the TV tuner for an ENVY 23 TouchSmart?

Hello LindaLamb:
First thing is connect your coex TV Anti cable to your computer the end connector looks like a bolt. Then open up Windows Media Center go down the list to live tv and follow and fill in your information with wizard . If your computer doesn't have an built in TV Tunner then you will need to purchase an USB TV tunner. http://www.bing.com/shopping/search?q=usb+tv+tunner&qpvt=usb+tv+tunner&FORM=HURE . frrw

How to dump block and identify the bytes stored for each column

SQL> select header_file, header_block
2 from dba_segments
3 where segment_name = 'APARTMENTS';
HEADER_FIL HEADER_BLO
4 1692
1 row selected.
SQL> alter system dump datafile 4 block 1693;
Statement processed.
How can I see the dump block and identify the bytes stored for each column?
tab 0, row 0, @0x73b
tl: 125 fb: H-FL lb: 0x1 cc: 4
col 0: [25]
52 65 64 77 6f 6f 64 20 53 68 6f 72 65 73 20 41 70 61 72 74 6d 65 6e 74 73
col 1: [20] 00 54 00 01 02 08 00 00 00 01 00 00 00 01 00 00 00 00 1b 8d
col 2: [53]
00 54 00 01 02 0c 00 00 00 01 00 00 00 01 00 00 00 00 1b 8e 00 21 09 00 00
00 00 00 00 11 00 00 00 00 00 01 45 6d 65 72 67 65 6e 63 79 20 44 65 74 61
69 6c 73
col 3: [20] 00 54 00 01 01 08 00 00 00 01 00 00 00 01 00 00 00 00 1b 8f

SQL> select header_file, header_block
2 from dba_segments
3 where segment_name = 'APARTMENTS';
HEADER_FIL HEADER_BLO
4 1692
1 row selected.
SQL> alter system dump datafile 4 block 1693;
Statement processed.
How can I see the dump block and identify the bytes stored for each column?
tab 0, row 0, @0x73b
tl: 125 fb: H-FL lb: 0x1 cc: 4
col 0: [25]
52 65 64 77 6f 6f 64 20 53 68 6f 72 65 73 20 41 70 61 72 74 6d 65 6e 74 73
col 1: [20] 00 54 00 01 02 08 00 00 00 01 00 00 00 01 00 00 00 00 1b 8d
col 2: [53]
00 54 00 01 02 0c 00 00 00 01 00 00 00 01 00 00 00 00 1b 8e 00 21 09 00 00
00 00 00 00 11 00 00 00 00 00 01 45 6d 65 72 67 65 6e 63 79 20 44 65 74 61
69 6c 73
col 3: [20] 00 54 00 01 01 08 00 00 00 01 00 00 00 01 00 00 00 00 1b 8f

How To: Identifying and locating the correct driver for your device

I have a Toshiba L50-A and recently had a problem with my Brother mfc-J220 printer, could not print anything. I first tried to download the drivers for my Brother printer device but didn't work. I was told it was because there was a missing driver in my Toshiba laptop related to printers?, but cannot see where I might be able to download these. Another person mentioned I should re format my Toshiba back to factory set and I would be able to recover these drivers?
Help! :-) could someone give me a "heads up " with this please?
Thanks

Which Satellite L50-A? There is a label on the bottom.
All-in-One / Multi-Function MFC-J220
Tell us more about what happened. "Didn't work" doesn't tell us anything.
-Jerry

HT1843 I'm using manual proxy setting for my wifi network, how can i save my manual proxy setting , in maual HTTP Proxy i have give server,port username and password details but it asking again and again pop window( Authentication for HTTPS proxy) how can

give me soluiton.

Hi,
My thought is to check the current IP of the server, as your smb.conf has the line interfaces = 192.168.1.109 which means samba will only listen on that interface for requests. If the IP of the server has changed, that would explain why samba isn't working.

Sender SOAP bypassing the basic authentication

Hi All,
I'm doing a SOAP to RFC scenario. Inorder to remove the basic authentication for SOAP i'm using the
WSDL url like
http://host:port/XISOAPAdapter/MessageServlet?channel=service:channel&sap-client&sap-user=username&sap-password=password
but even after trying it this way its asking for the authentication.
I would like to know, if i've to append the username and password with the url while creating the webservice from the ID or is it just that after creating the webservice i've to apeend it when trying to access it.
We are using pi7.0 here . So is there any change while passing the username and password .
I knw tht this can be accomplished by editing the sda file , but thats not wat we want .
Any kind of suggestion will be helpful.
Thanks & Regards,
Rahul.

Hi,
This may help you
Check these words in this Blog
Prompt for Login credentials
When the above asp is executed in browser it prompts for User name/Password. We need to give valid username/password for XI. Until the recent patches by Microsoft there was a provision for providing login credentials directly in JavaScript (HTTP Connection).But for security risks this has been disabled in recent fixes. The Credentials need not be re-entered as long as session is not closed.
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1442 [original link is broken]
Regards
Seshagiri

How set UserName and Password for HTTP Basic Authentication for a servlet

Hi..
How set UserName and Password for HTTP Basic Authentication for a servlet in JBoss server?
Using Tomcat i can do it .(By setting roles in web.xml, and user credintails in tomcat-user.xml).
But i dont know how do it in JBOSS..
I am using Netbeans and Eclipse IDEs.. Can we do it by using them also!?
Thank u

Hi Raj,
You can do this by creating a Login screen for the users and check the authentication of each user in PAI i.e. PROCESS AFTER INPUT.
Store the user information in a database table and check the username and password when the user enters it.
You can display password as *** also. For this double click on input box designed for password and goto Display tab. Select Invisible in the list and check it.
CASE sy-ucomm.
    WHEN 'BACK'.
      LEAVE PROGRAM.
    WHEN <fcode for submit>.
      SELECT SINGLE uname pwd
       FROM <DB table>
       INTO (user, pass)
       WHERE username = user AND
               password = passwd.
      IF sy-subrc = 0.
<Go to next screen for further processing>
      ELSE.
<Display Error message and exit>
      ENDIF.
ENDCASE.
Regards,
Amit
Message was edited by:
        Amit Kumar

How to set-up and use FAMILY Sharing

Can someone please explain to me in detail how to set-up and use FAMILY Sharing, none of the information I have so far found in the documentation helps at all, in fact it puts you in a constant loop giving the same information over and over again
We have quite a few devices from ipads, iphones and ipods and I need to set-up Family Sharing.
We have our main Apple ID which is linked to our Payment method, I have now got my son a new iPad, I have created his Apple ID and set-up a link via FAMILY Sharing to our main Apple ID.
From what I read we should be able to share our purchased Apps between family members.
So I figured I would be able to get the Apps now via iTunes that are part of the FAMILY Sharing, however when I go into ITunes (latest version downloaded yesterday) I can only see the Home sharing menu item not FAMILY Sharing, so I cannot work out in Itunes how to get Apps that are FAMILY shared. So ok I will try and get Apps directly via the Ipad using the App Store. To test it is working I look for a known paid for App, I then go to download it and it is now asking me to pay for it again.
Can someone please explain to me in detail how FAMILY Sharing is supposed to work and how I get it to work please.
Thanks for your help
Greg

Hey GregWr,
Thanks for the question. The following resources provides some of the best information regarding Family Sharing. Included, you’ll find information on making sure the accounts are set to "Share my purchases”, as well as information on downloading Family Member purchases from the iTunes Purchased section. Please note that some applications are not shareable.
Sharing purchased content with Family Sharing - Apple Support
http://support.apple.com/en-us/HT201085
Which purchased content can I share using Family Sharing - Apple Support
http://support.apple.com/en-us/HT203046
If you don't see your family's shared content - Apple Support
http://support.apple.com/en-us/HT201454
Thanks,
Matt M.

How do I find and use the "Spotlight Effect" in PS6?

How do I find and use the "Spotlight Effect" in PS6? I was using it yesterday and now I can find it ... help!

Hi,
I'll start with the most basic qusetion if you have Spot selected from the dropdown in the Lighting Effects Properties.
There are also some presets under Presets including a Default Setting.

How to set a cookie in the browser from an html page called via an Iview

How to set a cookie in the browser from an html page called via an Iview
Hello all,
I have an issue which is causing problems. I have a snap survey (html form with submit and cookie setting) which is embedded in a url iview.
Although the submit and the form work fine, the portal will not allow the cookie to be set it seems.
Is there a way to allow cookies to be set from an embedded page in a url iview??
You will make my day if you know!
System: EP7 SP13
Kind regards
Alex

Hi,
Check this:
http://www.oracle.com/technology/products/ias/portal/html/same_cookie_domain_with_pdkv2.html
Cookie Basics
Web browsers have built in rules for receiving and sending cookies. When a browser makes a request to a web server and the web server returns cookies with the response, the browser will only accept a cookie if the domain associated with the cookie matches that of the original request. Similarly, when a browser makes a subsequent request, it will only send those cookies whose domain matches that of the target web server.
These rules are designed to ensure that information encoded in cookies is only "seen" by the web server(s) that the originator of the cookie intended. These rules also ensure that the cookie cannot be corrupted or imitated by another server. By default, the domain associated with a cookie exactly matches that of the server that created it. However, it is possible to modify the domain at the time the cookie is created. Relaxing the cookie domain increases the scope of the cookie's visibility making it available to a wider "audience" of web servers.
For example, if a cookie is created by a.us.oracle.com, it's domain will usually be set to a.us.oracle.com. This means that the browser will only send the cookie to a.us.oracle.com. It will never send it to any other servers. However, if at the time of creation, the domain of the cookie is set to .us.oracle.com, the browser will send the cookie to any server whose domain falls within .us.oracle.com. such as portal.us.oracle.com, provider.us.oracle.com, app.us.oracle.com etc
Regards,
Praveen Gudapati

I haven't get any receipt of purchases since mid January 2014. How can I contact and let the itune fix this? (I live in Thailand, not available to call or find local support.)

I haven't get any receipt of purchases since mid January 2014. How can I contact and let the itune fix this? (I live in Thailand, not available to call or find local support.)

Has the ISP modems and routers been power cycled then tested again?
Possible ISP connection issues or LinksysSmartWiFi.com service outage maybe...
Are FW versions on all routers up to date?
To safely update FW, I recommend doing the following: Download the FW file from the support site first.
Disable the auto update feature on the router. <If this was on, possible someting was updated recently. I recommend leaving this OFF.
1. Save router config to file first using IE or FF with all security add-ons disabled.
2. Factory reset the router with all other devices disconnected or turned OFF accept for 1 wired PC.
3. Reload or Update the FW using IE or FF. Just download the FW file to your local wired LAN PC.
4. Factory reset the router and then set up from scratch first and test with out loading the saved config from file. Check to see if any problems are fixed before loading the saved config from file. Sometimes you need to set up from scratch with out loading the saved config file. Just safer that way.

How to set serialnumbers in the Batch UUT Identification dialog box?

Hello,
I've configured TestStand to use the 'batch process model' and I'm trying to read serialnumber from a file and then update the 'Batch UUT Identification dialog box' 'test socket' fields with these numbers. How?

Hi Thom-ve-as,
The serial numbers for each test socket in the batch model are obtained within the "PreBatch" callback sequence, called from within the Test UUTs execution entry point of the model.
If you override this callback within your client sequence file (or customize the process model file inside of your User directory) so that instead of displaying the dialog that the model uses to gather serial numbers from an operator, you can replace this process with functionality that reads a file and then writes to the properties below to set the serial numbers for each test socket and the batch.
Inside of the PreBatch callback sequence, you access the test socket serial numbers and batch serial number with the following respective properties:
Parameters.Mod
elData.TestSockets[i].UUT.SerialNumber
and
Parameters.ModelData.BatchSerialNumber
Jason F.
Applications Engineer
National Instruments
www.ni.com/ask

How do I find and configure the new 'global network proxy' feature in iOS 6?

The 'global network proxy' is listed as a new feature in iOS 6 but is not explained anywhere. I can't see how to set it up on the phone either.
It sounds like it might be the ideal feature I'm looking for. That is, when I connect to a random new open WIFI point, I would like a default HTTP proxy to use, rather than manually entering the same proxy for each access point that I connect to.
Is this possible? Is there any documentation for this new feature anywhere?

The old iTunes library was lost with the old PC. However, it all that music and content is still on your iPod there are many ways you can extract this content from the iPod and import it back into iTunes.
Your iPod is designed to sync with only one iTunes library at a time. It will recognize the iTunes library on the new PC as a new library. If you sync the iPod with this new library, all content will be erased from the iPod and replaced with what is in the new library. So what you will want to do is copy everything from the iPod to your new iTunes library on your PC first.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

How to set up and configure AirPort Express for AirPlay and iTunes

Saw somewhere that supposedly there were some apple written guidlines on the above topic. I have searched all over for them. Anyone know where I can get a copy to read through. Just trying to educate myself a bit and sety up another room with access to itunes, radio, etc with high quality speakers and amp off my express.

Here you go ...
How to set up and configure AirPort Express for AirPlay and iTunes

How to set up and use AirPlay

How to set up and use AirPlay

Welcome to the Apple Community.
AirPlay; When watching suitable content on the iPad, tap the screen to bring up the controls, tap the AirPlay icon and select the Apple TV. The content will then stream to the Apple TV.
Mirroring; Double tap the home screen button, swipe the application panel to the right, tap the AirPlay icon and choose the Apple TV. The iPad screen will then be streamed to the Apple TV.

How to set up and test the Basic Authentication for HTTP protocol

Similar Messages

Maybe you are looking for