How to setup  10.3 and cloud?

I installed new iTunes on my Mac. Also I synced my iPad and iPhone 4 but I'm not seeing an option to download music from cloud?

Lots of us are finding that not all our purchased tracks are being shown. This is a beta of the service and doubtless this sort of thing will be corrected over time. Note that we probably won't ever get tracks that were purchased prior to the iTunes Store shifted over to iTunes Plus, nor does it appear that free tracks are being listed though that might change.
Anyway, there's nothing at this time you can do about the issue.
Regards.

Similar Messages

  • Can anyone tell me how to setup odbc driver and configure in the setup

    Can anyone tell me how to setup odbc driver and configure in the setup

    You can't switch languages in OS X programs, just in the OS itself. Insert the Leopard OS X disc, and choose your new preferred language when prompted.

  • 1 How to setup new company name   2 How to setup row, rock and bin

    Hi,
    Anybody who can help me how to setup new company.
    And also how to setup row, rock and bin because we need to assign a location for our spare parts inventory.
    Thanks in advance.

    Row/rack/bin sounds like an inventory system. For a simple system you might want to build your own from scratch, but for even a mid-sized company you really want a shrink-wrapped solution -- i.e. Oracle apps or SAP.
    You don't want to be figuring out how to model material transactions, move orders, etc. Nor do you probably want to dive into various cost accounting options.

  • How to Setup Service Desk and CHARM in Solu Man 4.0

    Hi Gurus
    I am New to Solution Manager 4.0 and i want to setup Service Desk and Change Request Management for my client. Any one help me to guide where i can start and after configuring how the functionality of service desk and change request management.
    Can anybody send the documents with screen shot how to configure and how it lokks after Configuration.
    My client requirement is he wants to make Service desk as a ticketing tool and Charm as Change management tool
    Please help me
    Piont rewarded for solution
    Rajesh

    Hello
    I have configured Ibase for Charm, i followed spro config info as follows:
    Manually Create and Assign the Component Systems asiBase
    In this IMG activity, you define the Installed Base (iBase) manually, that is for refreshing existing iBases after solutions have been changed.
    An iBase component has to be created for each satellite system from which Service Desk messages will be sent to the SAP Solution Manager system.
    For the Value Added Reseller (VAR), it is not absolutely necessary to manually define the iBase at this point. We recommend, however, that you carry out this step so that you have a functioning test scenario.
    Activities
    1. In transaction Change Installed Base (IB52), choose iBase No. 1 (SOL_MAN_DATA_REP).
    2. Create under the IBase Header (SOL_MAN_DATA_REP) an IBase component, for example the SAP component system (SAP WEB AS) or use an existing one.
    3. To assign the systems as iBase components, go to the Text item tab.
    Three components are included in the standard package.
    4. Add all the satellite systems as text items to the table:
    Column Short text: Description of the system
    Column Identification: System ID, installation number, client
    5. Save.
    After changes have been made to a solution, repeat these steps to update system landscape data for iBase.
    Note:
    Every system is only listed once in the iBases. That means a system is not listed in an iBase if it has been listed in another iBase before.
    If the identification is not entered correctly, the system cannot correctly identify the component from the incoming Service Desk message.
    Its really good and I have set up the config in that way only.
    If useful reward the points.
    Thanks
    Regards
    Sharmishtha

  • PAP2T - how to setup SIP proxy and codec on PAP2T

    Hello
    How to setup SIP Proxy server IP addres and codec settings on PAP2T ?

    Your question here appears related to or a continuation of this previous question — is this the case?
    Based on the previous posting, whatever information you're receiving from the vendor support folks appears rather garbled or confused, particularly based on that "The vendor mentioned that we need to route the DNS and get it working (forwarded) on port 80 and I'd tend to avoid them." comment over there.
    I'd ask the vendor for documentation and details (as on its face, a requirement for this proxy seems, well, somewhat questionable), but yes, you're probably in the Apache config files here, and probably using overrides and .htaccess if the site is low-volume, as that'll keep the changes isolated for testing.
    Out of curiousity, is this proxy project part of an attempt to get this package to accessible, but without the vendor actually having the package running on port 80?  (Got a pointer to the package?  We can check the docs, and see if we can translate the installation requirements into something useful on OS X Server.)
    Are you running 10.5 or 10.6?  Both are pretty old releases.

  • How do setup multiple send and receive domain on single virtual ironport?

    HI all
    how do i setup multiple send and receive domain on single virtual ironport?
    Daemien

    Please use the admin guide to assist you for setup/configuration:
    http://www.cisco.com/c/dam/en/us/td/docs/security/esa/esa8-0/user_guide/ESA_8-0-1_User_Guide.pdf
    On the VESA - the Recipient Access Table (RAT) will control which domains your appliance accepts for.  
    AsyncOS uses a Recipient Access Table (RAT) for each public listener to manage accept and reject actions for recipient addresses. Recipent addresses include these:
    •Domains
    •Email addresses
    •Groups of email addresses
    This is covered in detail in the "Overview of Accepting or Rejecting Connections Based on the Recipient’s Address" section.
    Please see the "Configuring the Gateway to Receive Email" section for configuration of appliance for domains.
    Please see the "Defining Which Hosts Are Allowed to Connect Using the Host Access Table (HAT)" section for configuration of appliance for sending.
    I hope this helps!
    -Robert
    (*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)

  • Help! Confusion over how to setup intel3945 wireless and rc.conf

    Hi,
    I'm very confused.  I've already read through all the wikis and searched many forum posts.  I can't get my wireless intel3945 to work on my dell vostro 1400.
    Iwconfig says the wireless card is at wlan0 and dmesg | grep iwl says it has detected it.  However, when I try a iwlist wlan0 scan it returns :
    wlan0 Interface doesn't support scanning : Network is down
    I think the problem is that I don't know how to setup rc.conf correctly or use the command line to test the wireless.  Forum posts say many different things on how this is done.
    These are the steps I have taken:
    uninstalled the ipw3945 and ipw3945-ucode and ipw3945d.
    installed iwlwifi and iwlwifi-3945-ucode
    in my rc.conf modules, added iwl3945.
    I'm not sure how to setup the networking section, this what I have now:
    lo="lo 127.0.01"
    eth0="dhcp"
    wlan0="dhcp"
    INTERFACES=(lo etho)
    gateway="default gw 192.168.1.1"
    ROUTES=(!gateway)
    And in my dameons I have 'network'.
    How can I scan for networks and connect to them on the commandline?  I'd prefer not to use a gui tool because they never work and never tell me why they're not working.
    Any help is greatly appreciated!
    Cheers!
    kilolima

    iphitus wrote:
    broch wrote:I have ipw3945 and iwl3945 working with wpa2 (or vpn)
    (less complicatd than the above)
    don't use netcfg2
    Why?
    no particular reason.
    Simply when I configured wireless, netcfg2 wasn't available. Since then it (wireless) works, so not having any problems, I did not modify network setup. Next week or so I am going to install Arch on my daughter's laptop (per her request ) so I will try netcfg2.
    So this is what I have for ipw3945 wpa2 or iwl3945 with wpa2
    Below you will find a lot of words so read slowly but there is not much actual work
    ipw3945 setup
    kernel 2.6.23.x (Arch or vanilla)
    or
    kernel 2.6.24/2.6.24-gitX (patched with ipw3945 patch from gentoo -> compiling separate module for 2.6.24 may fail. if you want kernel patch I can post a link)
    for default kernel install Arch packages for ipw3945, ipw3945d, ipw3945-ucode
    or
    if you want to compile modules, you will also need ieee80211 (first uninstall kernel's default, then install from sources otherwise ieee80211 from sources may refuse to install)
    modify /etc/rc.conf
    DAEMONS=(.... @ipw3945d @network ....)
    that is all you don't need to add ipw3945 to MODULES=(.....)
    because ipw3945d will automatically start ipw3945 module
    do not list eth1 in network config section:
    lo="lo 127.0.0.1"
    eth0="dhcp"
    INTERFACES=(eth0)
    as you see, in my case only eth0 (wired) is listed and eth1 (wireless) is not listed
    now you are done with basic network configuration for ipw3945, restart network/computer to bring up ipw3945d/ipw3945
    check if modules are up and basic network is set:
    #lsmod | grep ipw
    #ifconfig -a
    or
    #iwconfig
    if all is o.k. configure
    WPA2:
    configure router for wpa2
    client: basically follow Arch wiki:
    configure wpa_supplicant (installed already of course)
    #wpa_passphrase your_ssid your_psk
    keep terminal window open with created encrypted wpa passphrase  and in the second terminal window edit /etc/wpa_supplicant.conf
    ctrl_interface=/var/run/wpa_supplicant
    network={
            ssid="your_ssid"
            scan_ssid=1
            proto=WPA RSN
            key_mgmt=WPA-PSK
            pairwise=CCMP TKIP
            group=CCMP TKIP
                    psk=whatever_output_from_wpa_passphrase
    Above pairwise and group setup will depend on your router (network capabilities)
    almost done:
    run
    #wpa_supplicant -Bw -Dwext -i eth1 -c/etc/wpa_supplicant.conf
    the above assumes that your ipw3945 is set as eth1 (from iwconfig output)
    to connect to the network I am using "wireless assistant" http://www.kde-apps.org/content/show.ph … tent=21832
    that is all for ipw3945. You may automate network starting/connecting to wpa2 by writing simple script.
    iwl3945
    --kernel 2.6.23.x
    install iwlwifi and iwlwifi-3945-ucode
    --kernel 2.6.24.x
    install only iwlwifi-3945-ucode as kernel has iwlwifi module incorporated
    default iwlwifi does not support LED so I suggest to install something like knemo for kde to show active network icon. The latest iwlwifi does support LED but it is not yet incorporated into 2.6.24 vanilla kernel.
    if you have kernel 2.6.23.x with external iwlwifi module
    modify /etc/rc.conf
    and add iwlwifi to
    MODULES=(.....)
    nothing else is required.
    if you have kernel 2.6.24 with integrated iwlwifi module you don't have to edit /etc/rc.conf
    As in the case of ipw3945, I do not list wireless interface (wlan0) in /etc/rc.conf
    for kernel 2.6.23.x
    load module/restart network or simply restart computer
    check if module is up
    #lsmod | grep iwl
    #iwconfig
    or
    #ifconfig -a
    WPA2
    same wpa_supplicant.conf as above, so if you already have it no need for modifications.
    start wpa2
    #wpa_supplicant -Bw -Dwext -i wlan0 -c/etc/wpa_supplicant.conf
    the only difference in the command is wireless interface: wlan0
    connect to the network, again I am using "wireless assistant"
    vpn
    I am using cisco vpn. Client is provided by vpn host, cisco does not provide vpn client for individual download, but you can find it on line.
    vpn host will provide pcf file for you
    - install vpnclient
    - copy your VPN profile (vpn.pcf) to the
    /etc/CiscoSystemsVPNClient/Profiles
    directory
    -- start vpn client
    /opt/cisco-vpnclient/bin/vpnclient connect vpn pcf_file_name
    provide username and password and off you go
    From my experience none of linux gui for vpn works reliably so you will have to resort to the command line.
    That is all, a lot of writing, but actual ipw3945 and iwl3945 configuration is straightforward and very short.
    Hopefully this will work for you.
    forgot to add regarding vpnclient (cisco)
    you will have to modify
    /etc/init.d/vpnclient_init
    line 38 and line 101
    replace
    /sbin/lsmod
    with
    /bin/lsmod
    Last edited by broch (2008-02-07 15:55:45)

  • How to setup Grade Scale and Point Values

    Dear Friends,
    We are Implementating HRMS for one of the client in Middle East. I was stuck up in setting up of Grade...
    Grade Pay Scale
    Grade Point Values
    Grade Steps and Points
    Grade Progression Approval
    How to setup the above things, can anyone pls help me on this
    with regards
    Swpana

    hi,
    Please check metalink note 455103.1 which will start out with providing viewlets (flash files) to show you how to use the Grade Step Progression functionality in Oracle HRMS with all the needed setup.
    you can download all of these flash files to your pc.
    this note has been recently added into Metalink.
    Good Luck,
    Mohammad AL-Hourieh

  • How to setup high availability and high precision Local NTP Service in Server2008R2?

    Hi guys,
    We have some servers on VMs, and we hope that the error between 2 server's clock MUST be smaller than 1 sec.
    For some reason, these servers can't access the internet. So, we suggest that we should setup some local NTP servers.
    For example, we want servers[10.10.10.1~10.10.10.6] to be the NTP server, and all clocks on servers[10.10.10.1~10.10.10.120] are synchronized automatically. How can we config NTP servers and clients?
    And when some NTP server's system clock changed suddenly(e.g. when some physical machine is down, and we move the VM onto a new one. The system clock may change.) How can we detected the change and fix the error?
    BTW, it says that "The W32Time service is not a full-featured NTP solution that meets time-sensitive application needs and is not supported by Microsoft as such." (http://technet.microsoft.com/en-us/library/cc773263(v=ws.10).aspx).
    Can we still use W32TIME? Because Non-microsoft software may cause a VERY LONG term examination in our company, and we prefer a microsoft solution.
    Sorry for the bad english.
    Kind regards,
    M.Sheng
    Alexander

    Hi sjmind,
    In domain environment, all computer clocks in an AD DS domain are synchronized with the time of an authoritative computer. Many factors can affect time synchronization on
    a network.
    An AD DS forest has a predetermined time synchronization hierarchy. The Windows Time service synchronizes time between computers within the hierarchy, with the most accurate
    reference clocks at the top. Therefore it is impossible to use multi computer as the authority of time source.
    You can refer the following KB to plan how to sync your domain computer time.
    Configuring the Windows Time service to use an external time source
    http://support.microsoft.com/kb/816042
    Configuring a time source for the forest
    http://technet.microsoft.com/en-us/library/cc784800(v=ws.10)
    I’m glad to be of help to you!
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • TS4002 how to setup folders in i Cloud mail

    I just start using iCloud as my e-mail after trying Yahoo and Google for years, my questions is how can I create mail folders as other web mail allow.
    Any suggestions is welcome
    Many thanks in advance for your time
    Warm Regards
    Aijaz

    Well, you tap on the name of the email account, then you tap on the folder you want to open.

  • How to Setup LCD Monitor and ATI Rage LT Pro ? Thanks

    I have already added the 109401-01 Patch to Solaris 8 (x86) , but I got
    a problem , that LCD Monitor and ATI Rage LT Pro was wrong in kdmconfig,
    Someone can help me how to config them? thanks

    Thanks for your response.I cannot sure which drivers should be selected , I have tried the all item of ATI,LCD monitor size and resolution in kdmconfig , but it doesn't work well ,even more , I didn't see any item which shows ATI LT Pro. The system is ok, color-mapping is right ,I can see the right color (256 colors) ,but something wrong with the right block of Login Screen that was redundant on the center of normal screen. 1152x900 resolution ,which is the default resolution in Solaris.My LCD limitation is 1024x768,I don't know that might be a problem or not,could it be a problem?
    Thanks.if you can send me a mail ,I can send the picture to you.
    [email protected] , thanks again.

  • How to setup Mac contacts and iPhone to sync with google?

    I have tried and tried, I setup the exchange account with my google info on my iPhone but what do I need to do0 on the Mac? I went to address book preferences and checked sync with google and entered my info I even then hit the sync now button in the toolbar but none of my contacts went to my google contacts.. I then created a test contact on the Mac and hit sync and nothing happened. I created a test contact on the iPhone and it did sync to google contacts on the web but not to my Mac address book? What am I doing wrong?
    Ps: I have about 50 contacts on my iPhone and Mac previosly synced with mobile me, I did turn off mobile me before doing this. I do not have any contacts in my google contacts on the web, I never did.

    Do you use iCloud for Contacts on your Mac and/or iPhone?

  • ( X-fi Titanium ) - How to setup both headphone and 5.1 speakers ?

    Just bought the Creative Sound Blaster X-fi Titanium PCI-Express. Now Im having problem configuring my headphone because there is no headphone output. There is only Front , Side , Rear , Center/Sub , Mic/Line-in , spdif in and spdif out. Is there any way to change the Side output to Headphone output ?

    Wow...just wow... Creative support doesn't even mention a feature on their own card. If once and for all that doesn't show the incompetence of support from Creative I don't know what else does. I'm not sure if this applies to your system or not but if so it can help. In the front of your X-FI (near the glowing X-FI symbol) you will see a number of pins. If you have an AC'97 or HD audio cable that runs from your case to your onboard sound on your motherboard thats connected to your headphone jacks on your case you have headphone support that way. I'm not sure if the pins only support HD audio or not I'm using the HD audio myself and haven't tested AC'97. The cables are 0pin or 8pin (sorry I dont remember but one pin is blocked out). If you look at the pins slightly inside the card near the glowing X-FI symbol look to the right (or left depending how you are looking at your soundcard). Within that first cluster of pins you will plug in your cable on the right side (of that first cluster of pins). That is where you would plug in this cable. If this applies to you then you will have headphone support without using ANY back supports at the back of the soundcard.
    This function is not documented anywhere when you get the card (at least not for mine) and I have no idea why but its there and it works. I hope this helps you.
    Comment #3 has a picture on what to look for. <a rel="nofollow" href="http://forums.steampowered.com/forums/showthread.php?t=985497"]http://forums.steampowered.com/forums/showthread.php?t=985497[/url]

  • How to setup MM costing and drive for new parts before ECM release key is triggered?

    Hi,
        I am on the engineering side of SAP ERP where I create new materials, BOMs, etc.  We do this with a change master without release key today.   We are switching to a more controlled/managed process for engineering changes where we will use change masters with a release key and approval workflows for these tasks (ECM).   The problem we are seeing is that the supply chain side of the business is not able to perform their tasks of costing materials and driving for new parts until the ECM workflows are complete, release key is active, and the changes are valid for production.  There must be a way for supply chain to perform these tasks beforehand, so that when the release key becomes active, material costing is complete, new materials are already on hand (or at least been ordered), so that the process of procurement/production orders are not delayed.  Can you point me to documentation that provides an overview, or summarizes what the best practices are for our supply chain when we start working with ECM release keys?
    Thanks,
    Joseph

    the release key allows you to release the change for specific business functions. Please look at the options available in release key configuration. You will need multiple release keys to bring the changes in a more controlled manner.

  • I want to know how to setup password expiry notification for outlook 2013 and 2010 in office 365

    On cloud mailbox non federated how set password expiry notification for all users which is created on cloud for accepted domain mail box only configure outlook, 
    any other option on exchange admin center for the same,
    I want to know how to setup Outlook 2013 and 2010  to receive PASSWORD EXPIRY NOTIFICATION without log  in domain,

    Hi
    As per the information and details provided by you, to set up password expiry notification, please follow these steps: -
    I suggest you run Office 365 desktop apps reffering to the steps below: -
    Step1: - Login to Office 365 Portals.
    Step 2: - In the right pane, click
    Downloads under Resources.
    Step 3: - Click Set up under
    Set up and configure your Office desktop apps.
    Moreover, please confirm the password policy by the
    PowerShell cmdlet.
    Step 1: - Install Micrsoft Online Services Module and connect to Office 365.
    Step 2: - Run Connect-Msolservice command.
    Step 3: - Get a password policy by the following PowerShell cmdlet:
                    Get-MsolPasswordPolicy –DomainName yourdomain.com
    I hope this information will be helpful for you.
    Thanks and regards
    Shweta@G 

Maybe you are looking for