How to setup a delay on startup?

Well, i have a Macbook Pro 15" late 2011, and when it's cold it sometimes freezes (i'm not sure why, and i don't have apple service in my country).
But when it warm, everything is ok, so i wanted to ask, if there is possobility to setup a delay (for about 30-40 sec) in startup, before
this string
kernel[0]: [AGPM Controller] build GPUDict by Vendor1002Device6741
after loading gpu it can freeze.
For example inter in single user mode for 30 seconds and then exit to normal mode, but without my help, some kind of script maybe?
Please help. And sorry for my english, i'm not a native speaker.

Isn't it under system preferences/security "disable automatic login"? I'm running 10.4 on the Mac I'm at right now so I can't verify my statement.

Similar Messages

How to setup a password upon startup?

Hello,
Is it possible to setup a password to come up upon login? If so I would appreciate any information on how to do this.
thanks,
Steve

Isn't it under system preferences/security "disable automatic login"? I'm running 10.4 on the Mac I'm at right now so I can't verify my statement.

How to setup not start cf9 local server on PC startup of VISTA OS

how to setup not start cf9 local server on PC startup of VISTA OS...? How to startup it manualy later if I wanted to?

The same way you would for any other Windows service: use the Services app in your Control Panel.
Adam

How to setup startup script in Solaris 10

Could anyone point me out how to setup a startup script at run level 3 or 2 in solaris 10 ?
Any previous solaris such as 9, 8, I just write a script and put in /etc/init.d/, then link it to run level 3 or 2. But in solaris 10 is different now.
I could not find any in the manual.
Thanks.

Could anyone point me out how to setup a startup
script at run level 3 or 2 in solaris 10 ?
Any previous solaris such as 9, 8, I just write a
script and put in /etc/init.d/, then link it to run
level 3 or 2. You can do the same thing in Solaris 10.
But in solaris 10 is different now.There are alternative methods that are recommended (creating a service via a manifest file), but the old startup stuff still works just fine. You don't get the benefits of monitoring and fine-grained dependencies with the legacy startup scripts.
I could not find any in the manual.An older doc is http://mediacast.sun.com/share/bobn/SMF-migrate.pdf. You might also check the SMF FAQ.
http://opensolaris.org/os/community/smf/faq/ Section 4 is on manifest development.
Darren

How to setup a Cluster of 3 servers on weblogic 9.2?

I'm trying to setup a cluster of 3 servers on WebLogic 9.2 on one physical computer.
I managed to startup 3 servers from cmd in windows like this:
startmanagedweblogic BiPublisher1 http://127.0.0.1:7101
startmanagedweblogic BiPublisher2 http://127.0.0.1:7101
startmanagedweblogic BiPublisher3 http://127.0.0.1:7101
Now I can open each of the 3 servers directly from my browser:
http://127.0.0.1:8101/xmlpserver
http://127.0.0.1:9101/xmlpserver
http://127.0.0.1:9501/xmlpserver
My questions are:
How to setup servers so that I can start them automatically from administration console?
How to configure address in administration console through which I will open my application in a browser?
And after that, how to configure that when server on which I work breaks, it automatically restarts application in another server (no need for failover because BI Publisher does not support session replication, I think)?
Do I need machine and virtual host, and what is their purpose? Node manager? Can somebody explain those things? What i did wrong?
I made this in administration console:
Administration console:
SERVERS:
AdminServer:
Name: BIPublisherServer
Listen address: 127.0.0.1
Listen port: 7101
Server1:
Name: BIPublisher1
Machine: tp43
Cluster: BiPublisherCluster
Listen address: 127.0.0.1
Listen port: 8101
Server2:
Name: BIPublisher2
Machine: tp43
Cluster: BiPublisherCluster
Listen address: 127.0.0.1
Listen port: 9101
Server3:
Name: BIPublisher3
Machine: tp43
Cluster: BiPublisherCluster
Listen address: 127.0.0.1
Listen port: 9501
CLUSTERS:
Cluster: BiPublisherCluster
Multicast Address: 237.0.0.101
Multicast port: 8050
VIRTUAL HOSTS:
Name: bicluster
Virtual Host Names: 127.0.0.1
Targets: Clusters: BiPublishercluster: All servers in the cluster
MACHINES:
Name: tp43
DEPLOYMENTS:
Name: xmlpserver
Path: C:\BiPub\xmlpserver.war
Targets: Virtual Hosts: bicluster

You have some reading to do to increase your familiarity with cluster / managed servers.
How to setup servers so that I can start them automatically from administration console?Add the 3 servers into your cluster. Use the cluster to start and stop all 3 servers from within the console instead of starting / stopping each server individually.
How to configure address in administration console through which I will open my application in a browser?You'll need some sort of load balancer to direct traffic so that the end user doesn't have to know the server/port combinations. Apache + Weblogic plugin for instance, but I don't think you'll be keeping all 3 instances on the same physical machine as your production design.
And after that, how to configure that when server on which I work breaks, it automatically restarts application in another server (no need for failover because BI Publisher does not support session replication, I think)?Target your application to "All servers in the cluster". You should have your managed instances on separate physical machines since your current configuration is vulnerable to a single machine failure which would shutdown all 3 instances.

How long does a HANA instance startup take?

In a previous thread Lars Breddemann wrote:
Data stored in row-store tables will be loaded into the main memory immediately on instance startup.
Data stored in column-store tables will be loaded upon first access, except when it has been specified that the table should also be loaded during startup.
Even if the persistent storage is located on SSDs, doesn't that take a really long time to start a large HANA database?
Is there already some rule of thumb about how long it takes in real life to start a large HANA database?
Or can you simply say that HANA doesn't impose a bottleneck (or other significant delays) but startup primarily depends on reading the data from persistent storage and thats it.
In my imagination, many HANA customers would want to load almost eveything from column storage during instance startup. So imagine a 1 TB HANA database reading 1 TB from SSDs and also creating indexes for column storage during instance startup. What is the order of magnitude for instance startup: Seconds, minutes or hours?
Regards,
Mark

Hello Mark,
here's some more background: Tables are either in row or in column store. Row store tables are loaded into memory during startup. Column store tables are set as a default to be loaded on demand i.e. the system loads columns when necessary. You can change the preload behaviour for column tables using ALTER TABLE (see http://service.sap.com/hana > SQL Reference).
Since most data will be stored in column tables, actual startup time is indeed pretty quick. If you want to avoid a performance hit on first data selections, you could create a simple SQL script that executed a LOAD statement your most critical tables and run it once after start up and when it fits best to your requirements.
Regards,
Marc
SAP Customer Solution Adoption (CSA)

How to setup three SharePoint sites on one server?

Hello,
How to setup three SharePoint sites on one server? I have three sites like:
http://site1
http://site2
http://site3
And need to have them running up on one server. I recall some changes need to be done to the host file, but not sure. Can you advise on what to change?
Thanks,
Paul
Paul

you need to make entries in DNS to get this done.
check here:http://spshare.blogspot.com/2012/05/how-to-create-host-header-web.html
nice blog with step by step explanation:
http://thuansoldier.net/?p=1323
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

How to setup multiple base station under one network?

How to setup multiple base station under one network? I have 6 rooms but one airport base station makes really difficult to get good signal from every rooms. I wonder if I can setup multiple airport base stations talking to each other under the same network to build up the signal strength will help solve this problem. But, is it possible? How?

One route would be to utilize a "roaming" network. In a roaming network, you would connect multiple AirPort Extreme Base Stations (AEBS) to the same Ethernet. Of course, this would require that your home is already wired for Ethernet.

How do I disable the automatic startup on HP Photosmart Premier when I turn my computer on?

Someone else posted ths question a month ago, but still no answers. Anyone?
How do I disable the automatic startup on HP Photosmart Premier when I turn my computer on?
Windows XP, SP3 operating system recently re-installed so I also reinstalled my printer software. Now, for some reason, each time I turn my computer on, my HP Photosmart C4100 all-in-one photosmart premier software opens. It is not in my startup. This slows down my computer terribly, which is why I never used the program before my re-install. How can I disable this feature? I only print, I don't use it for photos.
Any help here is appreciated.

Run msconfig.exe from the start button (type in msconfig). When it comes up go to the Startup tab and find and deselect the HP product you do not want to start. Save and reboot computer. Now try.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

How to Setup SSL on Oracle Application Server 10g Release 2 (10.1..2)

Hi All,
Can anybody tell me How to setup the SSL on Oracle Application Server 10g Release 2 (10.1.2).
I have all the required documents like
1. Oracle Application Server Portal Server Configuration Guide.
2. Oracle Application Server Web Cache Configuration Guide.
3. Oracle Application Server SSO Administration Guide.
I tried to follow all this documents but still i am not able to set SSL for Oracle Portal Server.

The Portal Configuration Guide, available on OTN at http://www.oracle.com/technology/documentation/appserver1012.html does provide some very specific information on how to set up OracleAS Portal.
Section 6.3.2.1 Configuring SSL for OracleAS Portal describes various configurations, such as:
SSL to OracleAS Single Sign-On
SSL to OracleAS Web Cache
SSL Throughout OracleAS Portal
External SSL with Non-SSL Within Oracle Application Server
For larger enterprise configurations, you can refer to the Enterprise Deployment Guide.
Can you give a bit more background on what you are trying to set up? Which scenario, what sort of hardware, software versions, and so on.
Regards,
Pete

How to setup a static IP for a wireless printer

This problem has been ongoing for several versions of OS X and the last five printers I've had and I'm finally over messing with it. For some reson, when using a wireless printer with OS X this is a repetetive problem, and I think if I configured the printer to a static IP address instead of using DHCP, it might work better. At least once a week, if not more often, I'll print something and get the ubiquitous Dock error of "Printer is not connected". The printer is still in Preferences, but if I delete it, then it doesn't show up as it should for selection.
The only way to fix this is reboot, and then the printer shows up again in Preferences. I select it and all is well again...until a few days pass and the same thing happens again. Using an HP LaserJet P1102w, still a current model, but it doesn't matter which printer I use. I also have an Epson Artisan 725 and the same thing happens with it about once a week. Also, this happens from both my Mac and my wife's Mac, so it's not an issue with just my machine.
I've searched for documentation on how to setup a static IP address for a wireless printer with the Airport Extreme, but all I find are tutorials on how to do it with an ethernet hard-wired printer. Any help would be greatly appreciated.

You could set up your router to do manual assignment of IP address instead of using DHCP, but that is a PITA, because then you'd have to manually set up IP for all your devices.
If you have AirPOrt Extreme, you could do this:
In your Apple TV, go to the Settings >> About and write down the MAC address of your ATV
Start up the AiPort Admin Utility
Go to Network tab
click + in the DHCP reservations
Choose an IP you want for your ATV & Enter the MAC address
From now on, this IP address will be reserved to the MAC address and only your ATV will be able to get it, no other device will.
It is not a static IP in a true sense, but behaves just like one.
Works great for me...
If you don't have a AP Extreme, I'm sure other routers will allow you do reservations too.

How to setup Charms in a 2 tier landscape ?

Hi All,
We have a two tier landscape i.e only having development and production system so how to setup STMS and all other settings in this type of scenario.
Can we use Virtual system in STMS as a Quality system ? If yes then please guide us and tell me how to proceed as if we dont know how to add virtual system in SMSY in solman. Please provide us with a clear picture and give us detail documentation if possible.

Hi All,
Please tell me as per the SAP standard recommendation is it necessary to have a cycle like DEV->QUAL-PROD for Charms as we are not having any Quality system or Client here in our landscape.
Please suggest a way how to proceed in this case. Please help me out.

How to setup breakpoints in a vector space?

Hi,
How to setup breakpoints in a 2D vector space in NI 7344 and check for them using flex_read_breakpoint_status_rtn?
Thanks.

Hi,
Is Office Communicator something to do with the Word, Exel and Powerpoint Office Package ?
What sort of Screen Names or IDs do you use with that ?
If these are MSN/Live accounts names then it can be made to work for Text Chats but not Video or Audio Only chats
10:38 PM Friday; April 20, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to setup iChat in a office

How to setup iChat in a office that using Office Communicator as a IM ?

Hi,
Is Office Communicator something to do with the Word, Exel and Powerpoint Office Package ?
What sort of Screen Names or IDs do you use with that ?
If these are MSN/Live accounts names then it can be made to work for Text Chats but not Video or Audio Only chats
10:38 PM Friday; April 20, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to Setup Historical DSC Database on a standalone Server

Hey @all,
I am looking for documentation how to setup a standalone server for the DSC Module(Ver. 8) Historical Database.
My aim is to log all data to this server. The Server will be running Win2K.
Do I have to install the complete Labview 8 software and the DSC Module?
Does a walkthrough exist how to setup a DSC server?
Thx!
Carsten

After installing the runtime you should only have to reboot the computer in order to get the citadel service running. At the point, for citadel purposes, this machine will behave as though you had the DSC development system installed. The 8.0 runtime has no setup requirements...it should only need to be installed. Unlike previous versions, 8.0 requires you to build your application into an executable and the runtime should be invisible to you once you install it. If this is not the case, please post about it so it can be looked at.
If you have specific questions, please post them and I will either try and help you find the answers, get them posted, or answer them myself.
Regards,
Robert

How to setup a delay on startup?

Similar Messages

Maybe you are looking for