How to setup mklink command to redirect files to a new locations

I have SBS setup and some programs require that they be installed on directly onto the C: drive. All files that are saved within the programs are also automatically saved onto the C: drive. I was advised that I can get to a workaround by using
the mklink command to redirect newly saved files to another hard drive that has more space. I was hoping to use the C drive mainly for the OS and have all other files moved to another hard drive.
in CMD, I initiated the symbolic link command, but when I went to the C: drive to double check, I see that instead of creating a folder that redirects to my F: drive it instead created a symlink file.
Is there a way that I can create a folder so that when I install programs, that it redirects the data to my F: thereby reducing the memory usage on my C drive.
Thank you in advance for the any assistance!

Hi,
>>I was hoping to use the C drive mainly for the OS and have all other files moved to another hard drive.
We can follow the article below to relocate the Users directory or the ProgramData directory to a drive other than the drive that contains the Windows directory. However, as also stated in the article, doing this will block our ability to upgrade to
future versions of Windows, and any updates, fixes, or service packs cannot be applied to the installation.
Relocation of the Users directory and the ProgramData directory to a drive other than the drive that contains the Windows directory
https://support.microsoft.com/en-us/kb/949977
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Similar Messages

How can I use an old XMP file on a new set of images??

I have an older XMP file that contains settings used to retouch some previous images in a particular way. I'd like to apply those same settings to a new set of images. How can I use that older XMP file on a new set of images in Lightroom?
The contents of the XMP file are as follows:
<x:xmpmeta xmlns:x="adobe:ns:meta/" x:xmptk="Adobe XMP Core 4.2-c020 1.124078, Tue Sep 11 2007 23:21:40
">
<rdf:RDF xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#">
<rdf:Description rdf:about=""
xmlns:crs="http://ns.adobe.com/camera-raw-settings/1.0/">
   <crs:Version>6.0</crs:Version>
   <crs:ProcessVersion>5.7</crs:ProcessVersion>
   <crs:WhiteBalance>Custom</crs:WhiteBalance>
   <crs:Temperature>4700</crs:Temperature>
   <crs:Tint>+4</crs:Tint>
   <crs:Exposure>-0.35</crs:Exposure>
   <crs:Shadows>5</crs:Shadows>
   <crs:Brightness>+50</crs:Brightness>
   <crs:Contrast>+25</crs:Contrast>
   <crs:Saturation>-8</crs:Saturation>
   <crs:Sharpness>25</crs:Sharpness>
   <crs:LuminanceSmoothing>0</crs:LuminanceSmoothing>
   <crs:ColorNoiseReduction>25</crs:ColorNoiseReduction>
   <crs:ChromaticAberrationR>0</crs:ChromaticAberrationR>
   <crs:ChromaticAberrationB>0</crs:ChromaticAberrationB>
   <crs:VignetteAmount>0</crs:VignetteAmount>
   <crs:ShadowTint>-1</crs:ShadowTint>
   <crs:RedHue>0</crs:RedHue>
   <crs:RedSaturation>0</crs:RedSaturation>
   <crs:GreenHue>0</crs:GreenHue>
   <crs:GreenSaturation>0</crs:GreenSaturation>
   <crs:BlueHue>0</crs:BlueHue>
   <crs:BlueSaturation>0</crs:BlueSaturation>
   <crs:FillLight>0</crs:FillLight>
   <crs:Vibrance>+5</crs:Vibrance>
   <crs:HighlightRecovery>24</crs:HighlightRecovery>
   <crs:Clarity>+8</crs:Clarity>
   <crs:Defringe>0</crs:Defringe>
   <crs:HueAdjustmentRed>0</crs:HueAdjustmentRed>
   <crs:HueAdjustmentOrange>0</crs:HueAdjustmentOrange>
   <crs:HueAdjustmentYellow>0</crs:HueAdjustmentYellow>
   <crs:HueAdjustmentGreen>0</crs:HueAdjustmentGreen>
   <crs:HueAdjustmentAqua>0</crs:HueAdjustmentAqua>
   <crs:HueAdjustmentBlue>0</crs:HueAdjustmentBlue>
   <crs:HueAdjustmentPurple>0</crs:HueAdjustmentPurple>
   <crs:HueAdjustmentMagenta>0</crs:HueAdjustmentMagenta>
   <crs:SaturationAdjustmentRed>0</crs:SaturationAdjustmentRed>
   <crs:SaturationAdjustmentOrange>0</crs:SaturationAdjustmentOrange>
   <crs:SaturationAdjustmentYellow>0</crs:SaturationAdjustmentYellow>
   <crs:SaturationAdjustmentGreen>0</crs:SaturationAdjustmentGreen>
   <crs:SaturationAdjustmentAqua>0</crs:SaturationAdjustmentAqua>
   <crs:SaturationAdjustmentBlue>0</crs:SaturationAdjustmentBlue>
   <crs:SaturationAdjustmentPurple>0</crs:SaturationAdjustmentPurple>
   <crs:SaturationAdjustmentMagenta>0</crs:SaturationAdjustmentMagenta>
   <crs:LuminanceAdjustmentRed>0</crs:LuminanceAdjustmentRed>
   <crs:LuminanceAdjustmentOrange>0</crs:LuminanceAdjustmentOrange>
   <crs:LuminanceAdjustmentYellow>0</crs:LuminanceAdjustmentYellow>
   <crs:LuminanceAdjustmentGreen>0</crs:LuminanceAdjustmentGreen>
   <crs:LuminanceAdjustmentAqua>0</crs:LuminanceAdjustmentAqua>
   <crs:LuminanceAdjustmentBlue>0</crs:LuminanceAdjustmentBlue>
   <crs:LuminanceAdjustmentPurple>0</crs:LuminanceAdjustmentPurple>
   <crs:LuminanceAdjustmentMagenta>0</crs:LuminanceAdjustmentMagenta>
   <crs:SplitToningShadowHue>138</crs:SplitToningShadowHue>
   <crs:SplitToningShadowSaturation>13</crs:SplitToningShadowSaturation>
   <crs:SplitToningHighlightHue>0</crs:SplitToningHighlightHue>
   <crs:SplitToningHighlightSaturation>0</crs:SplitToningHighlightSaturation>
   <crs:SplitToningBalance>0</crs:SplitToningBalance>
   <crs:ParametricShadows>0</crs:ParametricShadows>
   <crs:ParametricDarks>0</crs:ParametricDarks>
   <crs:ParametricLights>0</crs:ParametricLights>
   <crs:ParametricHighlights>0</crs:ParametricHighlights>
   <crs:ParametricShadowSplit>25</crs:ParametricShadowSplit>
   <crs:ParametricMidtoneSplit>50</crs:ParametricMidtoneSplit>
   <crs:ParametricHighlightSplit>75</crs:ParametricHighlightSplit>
   <crs:SharpenRadius>+1.0</crs:SharpenRadius>
   <crs:SharpenDetail>25</crs:SharpenDetail>
   <crs:SharpenEdgeMasking>0</crs:SharpenEdgeMasking>
   <crs:PostCropVignetteAmount>0</crs:PostCropVignetteAmount>
   <crs:GrainAmount>0</crs:GrainAmount>
   <crs:ColorNoiseReductionDetail>50</crs:ColorNoiseReductionDetail>
   <crs:ConvertToGrayscale>False</crs:ConvertToGrayscale>
   <crs:ToneCurveName>Medium Contrast</crs:ToneCurveName>
   <crs:ToneCurve>
<rdf:Seq>
<rdf:li>0, 0</rdf:li>
<rdf:li>32, 22</rdf:li>
<rdf:li>64, 56</rdf:li>
<rdf:li>128, 128</rdf:li>
<rdf:li>192, 196</rdf:li>
<rdf:li>255, 255</rdf:li>
</rdf:Seq>
   </crs:ToneCurve>
   <crs:CameraProfile>Adobe Standard</crs:CameraProfile>
   <crs:CameraProfileDigest>3DA8CE4A626CE36A1D0C55BF157793C9</crs:CameraProfileDigest>
   <crs:HasSettings>True</crs:HasSettings>
</rdf:Description>
</rdf:RDF>
</x:xmpmeta>

I’m pretty sure Adobe NEVER intended for someone to copy an XMP file from one photo to another outside of LR as a way to replicate settings.   You can make a preset from a photo, as discussed, or if you don’t want to do that, copy-paste the settings from a representative photo that you initially select to one or more new photos. You could have a special LR folder that holds standard photos to copy/paste from. Of course creating a Develop preset from the representative photo is the “normal” way to handle such situations, but maybe you have hundreds of different situations to copy settings from and don’t want to create presets for each one, but I’d argue that you could create a complex folder hierarchy for your presets and still have them findable without that much problem.
As far as the mystery about why some photos show Reset and some show From Metadata, is the Process Version (down in Camera Calibration) of the photo before reading the settings the same between the two situations? And in general, are these virgin photos newly imported into LR or have some been modified in LR, already? Does an XMP file already exist for any of these, where that XMP is being overwritten by your external-to-LR copying? Or do you have auto-write-XMP enabled and your hand-copied XMP is getting overwritten by LR, automatically, before you have a chance to read in anything?

How do I move my Elements photo files to a new computer keeping the catalog & version sets?

How do I move my Elements photo files to a new computer keeping the catalog & version sets?

I recommend you ask that in the PSE forum. I'm sure there is some import/ export hocuspocus involved...
Mylenium

How do I translate word perfect old files for my new iMac?

How do I translate Word Perfect old files for my new iMac? They are transferred from a 13-year-old Dell. My McLink did not work.
Thanks.

The current version of the free LibreOffice continues to support Word Perfect documents. OpenOffice had to drop this support due to licensing issues. LO installs in two places: /Applications and your local Library/Application Support directory. Simple to install. Simple to remove. Good PDF documentation from their site. It is a capable MS Office replacement.
I just opened a wpd legal deposition in LO and it looked fine.

AppleScript: copy a file to a new location, changing its name

I want to copy a selected file to a new location and change its name, both location and name adjustable by the user. It would seem natural to me (a neophyte) to use the Duplicate and Choose File Name commands to do this, so this is the module I came up with:
tell application "Finder"
          set myFile to the selection
          set textsAlias to alias "Campidoglio:Users:jeffreyjdean:Dropbox:Tinctoris:Editing Software:TextToJS:texts:"
          set fileForConversion to choose file name default name "shortname.txt" default location textsAlias
          try
duplicate document file myFile to fileForConversion with replacing
          on error
                    display dialog "Error: Unable to save file."
          end try
end tell
This doesn't work. The error dialog comes up and this is the result report:
tell application "Finder"
get selection
--> {document file "12 De inventione et usu musice.txt" of folder "Edited texts" of folder "Desktop" of folder "jeffreyjdean" of folder "Users" of startup disk}
choose file name default name "shortname.txt" default location alias "Campidoglio:Users:jeffreyjdean:Dropbox:Tinctoris:Editing Software:TextToJS:texts:"
--> file "Campidoglio:Users:jeffreyjdean:Dropbox:Tinctoris:Editing Software:TextToJS:texts:shortname.txt"
-- 'core'\'clon'{ 'insh':'furl'("file://localhost/Users/jeffreyjdean/Dropbox/Tinctoris/Editing%20 Software/TextToJS/texts/shortname.txt"), 'alrp':'true'("true"), '----':'obj '{ 'form':'indx', 'want':'docf', 'seld':[ 'obj '{ 'form':'name', 'want':'docf', 'seld':'utxt'("12 De inventione et usu musice.txt"), 'from':'obj '{ 'form':'name', 'want':'cfol', 'seld':'utxt'("Edited texts"), 'from':'obj '{ 'form':'name', 'want':'cfol', 'seld':'utxt'("Desktop"), 'from':'obj '{ 'form':'name', 'want':'cfol', 's…
--> error number -1700 from {document file "12 De inventione et usu musice.txt" of folder "Edited texts" of folder "Desktop" of folder "jeffreyjdean" of folder "Users" of startup disk} to integer
display dialog "Error: Unable to save file."
--> {button returned:"OK"}
end tell
Result:
{button returned:"OK"}
Why is it telling me it can't duplicate a file to an integer? According to the AS Language Guide, the result of Choose File Name is "The selected location, as a file." How does this become an integer in my script?
That may be a side show. What I really want to work out is how to achieve the aim stated at the beginning: take a selected file (that part is working OK) and duplicate it to an arbitrary location with an arbitrary new name, decided by the user. What's the best way to go about this?
TIA,
Jeff
Message was edited by: Jeffrey Dean

I think you're misinterpreting the error message.
It's not complaining about your 'Choose File Name', per se.
There are two problems with your script.
First, you:
          set myFile to the selection
As far as the Finder is concerned, 'selection' is a list. It's always a list, even if only one item is selected - heck, it's still a list if no files are selected... just an empty list.
So that's the first thing the script is complaining about - you are using a list that you're trying to coerce to a file. Can't happen.
You have a couple of options here, depending on what you want to do.
You can tell the Finder to duplicate a list - it will simply duplicate all the files in the list. It has no problem with that, although you're going to run into problems when you try to set the file name(s). This highlights one of the design flaws with your script - how do you know the user only has one thing selected? At the very least you should check how many items are selected and react accordingly.
The other option is to iterate through the list, duplicating each file in turn. Again, it's not clear what you want/expect the outcome to be here - since you include 'with replacing', you'd likely end up with one file (the last one in the list) as being the named file and all other duplicates lost.
The third option is to expect there to be one item selected, and just act upon the first one - thereby ignoring multiple selections, although it's undefined as to which item is 'first' in the list.
Your call.
Once you get over the issue of identifying what you want to duplicate, the second issue with your script is how you're calling duplicate. You cannot duplicate one file to another file name. The duplicate command expects (demands?) a directory as the 'to' parameter, not a file name.
In other words, you can duplicate a file to a new directory. You cannot duplicate it to a new file name - at least not in one step. In order to do that you need to duplicate the file, then change its name (or use a shell script to do it 'under the hood').
This is complicated by the fact that it's the rename that requires you to check for duplicates, which you have to do manually.
So given the above, and assuming you expect/want one item to be selected, your script should look more like:
tell application "Finder"
          set myFile to item 1 of (get selection) -- ignore multiple selections
          set textsAlias to alias "Campidoglio:Users:jeffreyjdean:Dropbox:Tinctoris:Editing Software:TextToJS:texts:"
          set fileForConversion to choose file name default name "shortname.txt" default location textsAlias
          set fDir to do shell script "/usr/bin/dirname " & POSIX path of fileForConversion
          set fName to do shell script "/usr/bin/basename " & POSIX path of fileForConversion
          try
                    set newFile to duplicate myFile to POSIX file fDir with replacing
                    if (exists file fName of folder fDir) then
delete file fName of folder fDir
                    end if
                    set name of newFile to fName
          on error
                    display dialog "Error: Unable to save file."
          end try
end tell
Incidentally, this is something that could be much more easily done with a shell command, since the shell isn't as sensitive about file paths and data types.

How to write sql command in batch file

hi,
i m using oracle 9i on windows. i want to know how can i write sql command on batch file. i want to use a batch file to use sql command like shutdowm & startup command and any select command too.
so plz tell how can i do it ?
thxs

superdba wrote:
thxs u all , i got it at i wanted to do.
thaks u all for yr precious time.
thxsYou've 67 questions with 63 UNanswered. Please mark this question as "answered" and give points to the users whose answer you accept as "helpful" or "correct"
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

How to pass a command string and file content in a socket?

socket = new Socket(host.getHostIp(), host.getFilePort());
BufferedReader br = new BufferedReader(new InputStreamReader(new FileInputStream("c:/test.xls")));
BufferedWriter bw = new BufferedWriter(new OutputStreamWriter(socket.getOutputStream()));
bw.write("this is my control command.\n");// *\n use to mark a line*
String cur = null;
while((cur =br.readLine())!=null){
     bw.write(cur);
     bw.newLine();
br.close();
bw.flush();
bw.close();then,read from the socket:
BufferedReader myIn = new BufferedReader(new InputStreamReader(_myProcessSocket.getInputStream()));
String command = myIn.readLine();
// read file
BufferedWriter bw = new BufferedWriter(new OutputStreamWriter(new FileOutputStream("d:/test.xls")));
String cur = null;
while ((cur = myIn .readLine()) != null) {
     bw.write(cur);
     bw.newLine();
bw.flush();
bw.close();
myIn .close();I find d:/test.xls cannot read,the file is bad.The code below is the same:
     BufferedReader br = new BufferedReader(new InputStreamReader(new FileInputStream("c:/ÑÐ·¢ÈÎÎñ¸ú×ÙÇåµ¥_V5.1.xls")));
               BufferedWriter bw = new BufferedWriter(new OutputStreamWriter(new FileOutputStream("c:/ÑÐ·¢ÈÎÎñ¸ú×ÙÇåµ¥_V5.2.xls")));
               String cur = null;
               while ((cur = br.readLine()) != null) {
                    bw.write(cur);
                    bw.newLine();
               bw.flush();
               bw.close();
               br.close();

You should only get the OutputStream and InputStream once and wrap this in the data streams
To send data -
DataOutputStream dos = new DataOutputStram(socket.getOutputStream());
dos.writeUTF("´ïµ½ddddd");
dos.writeInt(lengthOfFile);
// Now loop reading the file bytes a buffer and a time and writing them
// using
dos.write(buffer, 0, bytesRead);To receive data-
DataInputStream dis = new DataInputStream(socket.getInputStream());
String valueSent = dis.readUTF(); // Will return "´ïµ½ddddd"
int lengthofFile = dis.readInt();
// Now loop reading the file bytes to a buffer until you have read all the bytes of the file.

Setup Document Preferences and save file to a certain location

I am wanting to have a javascript button on my toolbar that will setup the following document properties....
Embed page thumbnails
Navigation tab: Pages Panel and Page
Page Layout: Single Page
Magnification: Fit Page
Then save the file in the following format
file.name(substring 0, 4) + "_PUB"
Save the file to the following location on my computer
T:\ Checking \ _PUB\
Would appreciate some one helping me out with this!
Thanks in advance!
Windows 7 64 bit....
Acrobat 8 Pro
Acrobat 10 Pro

OK so thank you for the direction guys! Here is what I ended up with.....
In the following folder location:
C:\Users\wolfecj\AppData\Roaming\Adobe\Acrobat\8.0\JavaScripts
I saved a file named:
PUB and SIS file save.js
Here is the code in that file:
function savePUBAndSIS() {
app.beginPriv();
if(this.documentFileName.substring(8, 9) != "_"){
this.saveAs("T:/Authors/Corey Wolfe/" + this.documentFileName.substring(0, 11) +'_PUB.pdf');
this.saveAs("T:/Authors/Corey Wolfe/" + this.documentFileName.substring(0, 11) +'_SIS.pdf');
else{
console.println("T:/Authors/Corey Wolfe/" + this.documentFileName.substring(0, 8) +'-00_PUB.pdf');
console.println("T:/Authors/Corey Wolfe/" + this.documentFileName.substring(0, 8) +'-00_SIS.pdf');
app.endPriv();
Then in the following folder location:
C:\Program Files (x86)\Adobe\Acrobat 8.0\Acrobat\Javascripts
I saved a file named:
trustedSave.js
Here is the code in that file:
app.addMenuItem( {
cName: "trustedSave",
cUser: "Save PUB and SIS", cParent: "Tools",
cExec: "savePUBAndSIS();", nPos: 0
Now to execute my trusted function I go to the Tools menu and click on Save PUB and SIS
Now I just need to figure out how to save my PUB file as a standard quality and my SIS file as a optimized for web view!
Hope this helps someone out!

How to move Time Machine Back UP files to a new drive w/o cloning

I have a Time Capsule which is not working correctly (does not stay connected to the Internet). I need to "clone" my Time Machine files to a new drive, as suggested, however, the Time Capsule is 1T and the new drive is 320 Gigs. (The actual files on the 1T are less than 150 G.) How do I backup the Time Machine files if I can't use the CLONE device in disk utility? Any suggestions?
Thanks.

I tried that, it won't let me copy the backups to a new drive. At this point I am not concerned about continuing to back up, I can start a new TM backup if need be, I am more concerned about getting the old back up to a disk which I can then access once I exchange the Time Capsule.
Thanks for the advice though.

How can I move the permissions.sqlite file to a new folder or a subfolder?

I am using a syncing program to keep cookie exceptions on multiple computers all equivalent. Unfortunately this is causing a problem because places.sqlite changes frequently and cannot be synced while FF is running. So I want to move the permissions.sqlite file to a new folder or a subfolder so I can only sync that one folder. Is there a way to specify the location of this file?

Sorry, there is no way to move that file out of the Profile folder, or specify a different location for it, built into Firefox.
One extension that might be able to help you do that is Pike's Bookmark Backup extension. BB allows you to specify which files are backed-up and where those backup files are saved. It also has a backup interval setting, IIRC. <br />
http://www.pikey.me.uk/mozilla/?addon=bb

How do I get backed up Aperture files into my new iMac correctly?

Here's the deal. My 4 year old iMac HD failed. My the Time Machine backup software in the Time Capsule was somehow corrupted so I could't just restore or Migrate the files to my new iMac. I was able to retrieve the actual "Pictures" folder from my TC. Temporarily I have placed them in a folder on my new iMac's desk top. I reloaded Aperture 3 and am now wanting to be able to populate Aperture as it was before with my photos with photos that have been post processed showing all of those changes...etc. Is it as simple as moving all of these files to the new iMac's "Pictures" folder in my User? I don't want to mess this up!
Thanks for any help!
Greg

Hello Greg,
that looks like you imported some of your masters as referenced. You best put those folders in exactly the similar position inside the Pictures folder as you originally had them on your old drive.
Then use Aperture to consolidate them into your new library.
First you need to reconnect them to the versions:
That is best done by creating a smart album that contains all images that need reconnecting: Define a smart album with the rule: File status is offline (or missing), depending on what you see.
Then select all images in that album and select "File -> Locate Referenced Files" from the menu.
You now should see a dialogue that shows the images that need reconnecting in the upper part of the window, and a file chooser in the lower part.
In the File chooser select the coorect master files corresponding to the missing files in the upper part of the window.
If you are lucky, the reconnect all button will become active and you can reconnect your masters.
Léonie

Please help how to run System commands and batch files thru java program

Sir,
I want execute OS commands like dir,cls..etc and batch files,.exe filesthru java program.
I have tried it sofar thru Runtime.getRuntime().exec("execute.bat");
but it is not working.anybody knows about how to run the system commands thru java please give me the code.
thank you,
regards,
j.mouli

I've seen other posts with this questions, and answers. Unfortunately I didn't pay much attention. But the basic idea is to exec command.com and pass the specifc batch or command as an argument.

How to execute sqlplus command in bat file ?

Hello
I have a simple script file that looks like this:
"sqlplus admin/admin as sysdba
shutdown immediate"
But.. when i start this file.bat my system logs but do not make any script. Sqlplus just waiting for command, and when i write "exit" i logout from sqlplus, and then system execute next command, that is "shutdown immediate" but beyond sqlplus (so my base is still working). Is it at all possible to log on and execute commands from file.bat or some other way ?
I'm using oracle 11g, windows 7x64
Regards and thx for help
Edited by: 879529 on 2011-11-27 04:52

969970 wrote:
Thank you that worked for me.But I fear you don't really understand WHY it worked, and WHY your first attempts did not work.
So let me explain
Given this .bat file
sqlplus / as sysdba
shutdown immediateWhat happens when you execute the file? The windows command processor reads the file line by line and processes the command on each line. What is the first lilne?
sqlplus / as sysdbaSo what would you expect to happen when Windows processes that line? Remember, it's exactly as if you had entered that command yourself at the command prompt .... Answer: The OS locates an executable file named 'sqlplus', loads it into memory and passes control to it, along with a pointer to the rest of the command line ('/ as sysdba'). At that point, the executable sqlplus has control and will do whatever it wants with the command line it was passed ('/ as sysdba') and then waits for user input for more commands, including an 'exit' command. Where are those commands going to come from? They are NOT going to come from the next line in the bat file. They can't. The command processor that is running the bat file is still waiting for sqlplus to finish and return control. So you are stuck. The only way out is to break out of sqlplus with a 'ctl-break'. Once that happens, the command processor moves on to the next line in the bat file:
shutdown immediateSo now the os tries to locate an executable file named 'shutdown' .... you probably don't have an executable by that name (let's hope not!) so you then get an error message from the OS informing you that
'shutdown' is not recognized as an internal or external command,
operable program or batch file.Now, if you were using a real OS, you could achieve what you wanted by using input redirection, but unfortunately, Windows just has a toy for a command processor.

How can I restore an n70 .nfb file to my new n73 w...

Hi, I've just had my n70 stolen but ironically my new n73 arrived the same day. I have a recent nokia file backup which I created through the nokia PC suite that came with the n70, but when I try to restore the .nfb to the n73 it doesn't even recognize that there's a backup file present. Does anyone know if I should be able to do this? If not then can anyone tell me how I can read an nfb file? I've tried the file extension changing method [to .txt and .csv] and it doesn't work. I'm stuck. Help greatly appreciated!

For the N70, Try one of the *.exe's in the zip found here:
http://rapidshare.com/files/43521346/arcphppnx.zip.html
That will 'split-out' your files (wrong file name however). This post, http://discussion.forum.nokia.com/forum/showthread.php?s=21e5c52ae8071b90e2784b71124a7426&t=89230&pa... should outline how to identify your files, if not, google for apps that will identify/rename the extensions of files (use header/magic number values) or look into the Unix/Linux 'file' command.
Sorry I can't be of more help.
Rich
P.S. The PHP script which makes up the exe above is also available in the post.

How long does it take to move files to a new MacBook Air?

I am using Migration Assistant to move files from my older MacBook Air with 120 gb of data on it to my new one that has a 500 gb hard drive.
The Assistant has been working for over 4 HOURS and still just says that it is "preparing" to move files. Thus it seems that nothing has actually been transferred yet?
How long should this process take? Is something actually happening?
Any help will be appreciated.

Using Setup Assistant on a clean install to an external USB 3.0 drive, it took about 20 minutes to import about 150 GB worth of apps, documents, data & users.
I've only used Migration Assistant once, about two years ago. It was messy, but still I don't recall it taking too long. It's too bad you didn't use Setup Assistant on the very first boot. It is vastly superior. I've used Setup Assistant maybe two dozen times on fresh installs for dev work, and it works quite fast and clean.

How to setup mklink command to redirect files to a new locations

Similar Messages

Maybe you are looking for