How to setup syn data of Disconnected Analytic

Hi All,
i have face problem when i click "Update Data" Button on in disconnected analytic , and it throw an error below .
Type mismatch of catalog object /shared/Disconnected/Products -- expected queryitem1, got .
Error Details
Error Codes: UVWDR6UA
How to solve it ?
Thank you ,

sorry for the late response...I doubt if it helps you now but maybe someone else will benefit.
I had a similar problem and did not know how to go about finding out the values of the constants like XLPAPERLEGAL, XLPAPERA4, etc. Luckily I stumbled on the answer.
1. Open up Excel.
2. From the toolbar go to Tools->Macros->Visual Basic Editor
3. From the new toolbar go to View->Object Browser
4. In the 'find' box enter A4PAPERA4 (or whichever constant interests you) and hit the binoculars icon
In the pane at the bottom it will show something like:
Const xlPaperA4 = 9
Member of Excel.XlPaperSize
Which means that xlpapera4 has a value of '9'!
By the way, xlpapera3 has a value of 8.

Similar Messages

How to setup permanent data , temperary data ?

Hi Chris
I'm not familiar to Unix
With Unix 16GB RAM, Could you show how to config permanent data , temperary data by only real memory (not virtual memory) ?
# swapinfo
Kb Kb Kb PCT START/ Kb
TYPE AVAIL USED FREE USED LIMIT RESERVE PRI NAME
dev 8388608 0 8388608 0% 0 - 1 /dev/vg00/lvol2
reserve - 8388608 -8388608
memory 16746504 8237404 8509100 49%
Many thanks
Edited by: TuanTA on Jun 4, 2009 11:51 PM

Hi TuanTA
When the data store is loaded, this is automatically put in RAM. The space needed for TimesTen memory is PermSize + TempSize + LogBuffer + overhead. It is all be allocated in a single shared memory segment which sits in RAM. If your server was struggling for memory, it is possible this chunk of memory could be swapped out to disk (swap space) to make room, but things would have to be pretty bad for this to happen.
Can you tell me what your OS is please? On some operating systems you can use the 'MemoryLock' attribute to ensure that no portion of TimesTen's memory segment is 'borrowed' by the OS. Maybe it is this attribute you need more information on. If you can add more detail about your concern it would be appreciated.
If you have access to MetaLink, please review note:558237.1 which discusses "Memory Usage in Virtual Memory Systems" from a TimesTen perspective.

How to setup the data in consumption tab in MM02

MM02>Additional data>Consumption TAB
in consumption values, the field is grey, which means I cannot input anything
what should I do so that I can make some input? in SPRO or in front?
thank you in advance!!!

hi,
I followed you steps---create forecast tab and maintain Forecast model as T or S
but the consumption values still cannot be changed, it is in display status!

How can i do..my apple iphone 5 no setup cellular data APN edit..i use ios 7.1.2.. Can hel me

MY apple iphone 5 no setup cellular data APN edit..how can i do..please help me?? Iphone 5 me no manual set access point name..please help

Mr rahim wrote:
HOw?? I do Not know how to want to do..help give guidance
You don't know how to call your phone carrier? Pick up the phone and call them or go to the carrier store.

How to setup Datasource to use data triggers in Data Template

hi all,
Pls. let me know the process how to setup dataSourceRef that has to be mentioned in the data template tag for making use of various data triggers?
I have packaged function which will create a temporary table that I am using in my main query. This whole process should happen in the beforereport trigger.
can anyone help me in this regard.
Thanks in advance
Praneeth
null

Yes for triggers use need functions returning boolean value. These functions must reside in a package and you have to define package name as defaultPackage="package_name" in data template.

How to setup mail client in Data Integrator 11.7 to make use of mail_to()

How to setup mail client in Data Integrator 11.7 to make use of mail_to() function.
I am using mail_to() function in one of my job to know the status of source file. If source file is not ready, our DI job should fail and send mail notification with reason for failure.
But mail_to() function is not sending any mail. I guess I need to set up email client.
Any one please help to resolve this issue.
Thanks
Phani

From the DI documentation that comes with the installation:
To use this function, a mail client must be installed and running on the Job
Server computer that calls the function. The login account for the mail client
must have the same user name and password as the Data Integrator service.
The type of client varies by the operating system:
u2022 If the Job Server is on a computer running the Windows operating
system, then the mail client must comply with MAPI (message application
programming interface). In addition, the mail client must be configured as
the default mail client. For example, Microsoft Outlook is a MAPI-based
mail client.
If the Job Server is on a computer running the UNIX operating system,
then the mail client must be mailx-compliant.
So:
Mail client installed and configured and set as default
Mail client uses the same credentials as the job server service
Or use another function: smtp_to();
If still not working or you are not allowed to use an installed mailclient on your box, then try Blat: http://www.blat.net/

How to setup Events under Data sources in LBWE

Hi,
I need to know how to setup the events for Shipments data source in LBWE,i activated the data sources and extracted the data but there is no Events for Those shipments data source under application area 08.Other application areas like 11,12...those are having the events.
Why the application 08:Shipment don't have events??How can i assign the events???Can you guide me??
Thanks,

Hi,
Oh..Great Help..
May be any one can you share your ideas???
Nick in your system also don't have events for 08 Shipments??
and also i have one more question :In my client they have two clients in R/3, one for customization and another one is testing,but when i changed or activated my DS those are not effected in testing system..
How can i capture those changes into testing client??any one have any idea..as per my knowledge DS are client independent right so automatically effects those changes into another clients.but in my case it is not happening??? Thanks

How to setup Data guard for SAP database?

Can someone please tell me how to setup data guard for SAP databases?
Thanks,
Abhi

Hi Abhi,
have a look at OSS 105047 - Support for Oracle functions in the SAP environment you find this under
14
Oracle Data Guard
You can use "Physical Standby".
You cannot use "Logical Standby".
You are allowed to use Fast Start Failover (FSFO) but SAP Support is not provided.
You can use Data Guard Broker.
You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
Maximum Protection causes the primary database to terminate if problems occur in the standby database.
And here you find on Oracle white paper from 2010 http://www.oracle.com/us/solutions/sap/wp-ora4sap-dataguard11g-303811.pdf
Perhaps some SAP user have answers for you http://scn.sap.com/community/oracle/content?query=guard
regards
Kay

How do I avoid data loss during setup?

Hi All,
Update: below is my original question/concern. But since posting, I've come across others posting about data loss at various stages of install and initial setup and syncing. None of those posts have been replied to, and I think many of us need some answers. So after reading one guys calendar got scrubbed, I checked mine and the same thing... I had synced through iTunes before upgrading, and all my freshly updated calendar events had been erased when I enabled iCloud. Honestly, what is it with Apple's obsession with deleting people's data when adding new equipment or services?
So add to my question below, a how to for getting data from existing devices to cloud w/o having cloud erase files and data from devices...
I'm just setting up. I want to go into this cloud thing slowly, starting with just calendar syncing.
I go to settings: Documents and Data and click it off. I get a pop up witch says "All documens and Data stored in iCloud will be deleted from this iPad"
What?
This switch was in the on position upon install. Have my Documents and data already been scarfed to the cloud, where now if I turn off the feature I lose my files?
And what about down the road if one wants to turn off the feature after it's been in use? Doe my iPad get scrubbed of my files?
Am I learning that once my files get sent to the cloud, the server holds a copy which I can never scrub off iCloud?
The way that warning reads, my only option for taking a device off the grid is to have my data scrubbed from that device.
What am I missing? I want to control which of my data makes it to the cloud. This says they take it all up front and steal my copy if I try to get my device off the grid. No?
Please help me understand how to control which of my files go to the cloud, and how not to have my files removed from my device if I chose to opt out of the docs and data sync feature?
S.
PS why would they ever make that a consequence of turning off the feature?

Unless you have signed up for AT&T's international roaming for phone calls, I suggest putting the device into Airplane mode. That is what I did when I did the 3 day Bahamas Cruise. And to support what AmishCake said, the cruise lines charge for their wi-fi. Generally a daily 24-hour charge, or they will have a special for the length of the cruise, but it is pricey.

How to measure the Data setup time

I want to do a SPI timing AC characteristics.
I use labview capture a frame of SPI data package from a oscilloscope and display in a waveform Graph.
Lead time, Data setup time, data hold time... should be measured.
So, what is the next step should i do?
Thanks

Thank you, asastet.
I test the SPI module of a MCU. I have download a code to init the SPI and transfer a data package continuously.
The 4 channels of oscilloscope connected with SS, CLK, MOSI, MISO.
In labview, I capture a frame of SPI data package from oscilloscope and display in waveform graph control.
My project will automatically measure the data setup time and data hold time according CLK vs. MOSI.
Thanks.

How can I move data from one loop to another?

I am using LabVIEW to record and display data. The problem that I have run into is that if I try to collect and display the data all in one loop data points are lost because the loop takes so long to execute. I decided to break my program into two independent loops and the data is recorded at proper speeds, but now I cannot get the data out of the first loop and into the second loop.

See my example for one method of how to setup the Queue which Omar suggested. You'll also see many other ways, most of which should be avoided until you get more experience.
Communicating Between Loops
Richard

How to refresh the data in sharepoint online

Hi,
I have an Office365 PowerBI Preview site and I have uploaded a excel sheet with a using power query connecting the
azure data source. I then setup the "Data Management Gateway" and "Data Source" in the Manage Data settings within PowerBI and the Excel spreadsheet now refreshed data within the Excel web app.
Here I won't refresh my data but no error shown.
But Selected "Edit the Excel" option and refresh the connection on workbook Queries in power query within excel.
Tts works fine. I can able to see my modified data.
Anyone how to resolve this issues?
Thanks,
Ramu

Is this still an issue, Ramu?
Thanks!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

How to extract Inventory data from SAP R/3 system

Hi friends How to extract Inventory data from SAP R/3 system? What are report we may expect from the Inventory?

Hi,
Inventory management
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/how%20to%20handle%20inventory%20management%20scenarios.pdf
How to Handle Inventory Management Scenarios in BW (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Loading of Cube
ref.to page 18 in "Upgrade and Migration Aspects for BI in SAP NetWeaver 2004s" paper
http://www.sapfinug.fi/downloads/2007/bi02/BI_upgrade_migration.pdf
Non-Cumulative Values / Stock Handling
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/93ed1695-0501-0010-b7a9-d4cc4ef26d31
Non-Cumulatives
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Here you will find all the Inventory Management BI Contents:
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
2LIS_03_BX- Initial Stock/Material stock
2LIS_03_BF - Material movements
2LIS_03_UM - Revaluations/Find the price of the stock
The first DataSource (2LIS_03_BX) is used to extract an opening stock balance on a
detailed level (material, plant, storage location and so on). At this moment, the opening
stock is the operative stock in the source system. "At this moment" is the point in time at
which the statistical setup ran for DataSource 2LIS_03_BX. (This is because no
documents are to be posted during this run and so the stock does not change during this
run, as we will see below). It is not possible to choose a key date freely.
The second DataSource (2LIS_03_BF) is used to extract the material movements into
the BW system. This DataSource provides the data as material documents (MCMSEG
structure).
The third of the above DataSources (2LIS_03_UM) contains data from valuated
revaluations in Financial Accounting (document BSEG). This data is required to update
valuated stock changes for the calculated stock balance in the BW. This information is
not required in many situations as it is often only the quantities that are of importance.
This DataSource only describes financial accounting processes, not logistical ones. In
other words, only the stock value is changed here, no changes are made to the
quantities. Everything that is subsequently mentioned here about the upload sequence
and compression regarding DataSource 2LIS_03_BF also applies to this DataSource.
This means a detailed description is not required for the revaluation DataSource.
http://help.sap.com/saphelp_bw32/helpdata/en/05/c69480c357354a8846cc61f7b6e085/content.htm
http://help.sap.com/saphelp_bw33/helpdata/en/ed/16c29a27db6e4d81a015be8673eb80/content.htm
These are the standard data sources used for Inventory extraction.
Hope this helps.
Thanks,
JituK

How to store the data coming from network analyser into a text or excel file

Hii everyone
I'm using Agilent 8719ET network analyser and wish to store the data coming from netowrk analyser into a text file/ excel file.
Presently I'm able to get the data on Labview graph using GPIB . Can anyone suggest how to go ahead after collect data sub vi. How can the data be stored into a file apart from showing on the graph?
Attached is the vi for kind consideration...
Looking for help
Regards
Rohit
Attachments:
Agilent 87XX Series Exceed Max Meas.vi ‏43 KB

First let me say that your code really looks pretty good. The data handling could be made more efficient by calculating the number of datapoints that are going to be in the completed dataset and preallocating the entire array -- but depending upon your answer to my questions, the logic in the lower shift register may be going away - so we won't worry about that right now.
The thing I need to know before addressing the data storage question is: Each time you call "Collect and Display Data.vi", how many element are in the array? Are you reading single data points, or a group of data? (BTW: if the answer to that question is obvious based on the way the other VIs are setup, I don't have the drivers so I can't tell what the setup values are.) Second, how fast does the loop iterate? Are we talking msec per loop?, seconds? fortnights?
The issues here are two-fold: how much data? and how fast is it coming? The answer to these will tell you how to save the data.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How do I transfer data from one iPhone to another?

How do I transfer data from one iPhone to another?

If your old device is an Apple using iOS 5 or later, and you have an iCloud account, you can transfer all your saved messages, email accounts, photos, notes, and other personal settings to your new iPhone.
Here's how...
Connect your old Apple device to WiFi and to a power source.
Back it up to iCloud by going to Settings > iCloud > Storage & Backup and toggling iCloud Backup on. The time it takes to ba ckup depends on how much data you have and on the speed of your internet connection.
iCloud backs up your device once a day. If it needs backing up before you transfer to your new iPhone 5, tap Back Up Now in Settings > iCloud > Storage & Backup. Do not start transferring before the backup is finished.
Turn on your new iPhone and complete the setup by selecting your language and country, and choose whether to enable Location Services. When prompted, choose your WiFi network.
When prompted to set up, choose Restore from iCloud Backup, tap Next, and enter your Apple ID and password.
Select the backup of your old device and tap Restore. Wait until the device has finished restoring from the backup.
When the restore process is complete, your iPhone will restart and be ready to use.
Connect your iPhone 5 to iTunes to sync data not contained in the backup (such as music, videos, apps, and so on). You can choose the data that are synced by clicking the syncing tabs in iTunes.

How to setup syn data of Disconnected Analytic

Similar Messages

Maybe you are looking for