How to Setup Transport on Windows Server

Hi guys,
I'm trying to setup a transport between two systems. I have done it inthe past in Unix but never done it in Windows. It is kinda difficult for me in Windows.
Can you please help me understand the setup.
Server 1. >> PC1
Server 2. >> PC2
I have made PC1 a domain controller and shared its /usr/sap/trans to PC2. Also updated TMS parameters in PC2 pointing DIR_TRANS to PC1/usr/sap/trans, but It is not showing up in PC1 (domain controller)
Your help appreciated!!
Thanks,
Afi

On the Server where you want to share \usr\sap\trans for the landscape( I assume Server1 or PC1 in your terms), login as windows domain admin ( or with admin rights) --> right click my computer --> Manage --> click on Local Users and Groups --> Double click on administrators --> and add users of SAPService<SID> of the other server ( your Server 2 or PC2) and clock pk Ok.
This should resolve the problem.
Concept is, giving other server to read and write access to shared drive of Transport directory. There can be no. of days do implement it depending on in House Windows Skills and Secuirty audits, but the above method works.
Thanks,
Krishna

Similar Messages

How to setup a Firefox update server on a Windows 2012 server?

Are there any instructions available on how to setup a Firefox update server that can automatically download updates from the Mozilla site and users can then grab the updates from the internal server? I'm using wampserver so that I can utilize Apache and PHP on the 2012 server.
Thanks!

See this MDN page: https://developer.mozilla.org/en-US/docs/Mozilla/Setting_up_an_update_server
Note: Last updated by: Kohei, Sep 15, 2009 4:08:00 PM

How To Setup A Local Exchange Server Integrated With Office365 For A Single Mailbox

Hello,
We recently migrated to Office365 but had an issue since we need more than 16 simultaneous connections to a single mailbox. Because of this, we need to deploy a local Exchange Server that will be used to host a single mailbox that requires up to 500 simultaneous
connections for a Contact Center application. I'm looking for information on how to setup the local Exchange Server to basically create a local instance of a mailbox hosted on Office 365. So we can have our application open the numerous simultaneous connections
to our local server which will then connection to Office 365 to send/receive email through the mailbox hosted on Office365.
Please let me know if you have any information or resources you can direct me toward.
Thanks,
Chris

Hi,
To deploy local Exchange server integrated with Office 365, we can depend on Exchange Server Deployment Assistant:
http://technet.microsoft.com/en-us/exdeploy2013/Checklist?state=2419-W-AAAAAAAAQAAAAAEAAAAAAAA%7e
Please note that there may be 9646 error if there are many simultaneous connections at the same time.
Thanks,
Angela Shi
TechNet Community Support

HT202879 I am switching to Apple macbook pro from Windows laptop. Is Apple compatible with Microsoft Office? How can I transport from Windows to Mac? What I have saved on external hardrives, will I be able to open it on Mac?

I am switching to Apple macbook pro from Windows laptop. Is Apple compatible with Microsoft Office? How can I transport from Windows to Mac? What I have saved on external hardrives, will I be able to open it on Mac?

Office for Mac, http://www.microsoft.com/mac/products, can open/edit/create Office documents.If your external drive is formatted NTFS then you can copy the Office documents to your computer and work on them. You won't be able to save the files back to your NTFS formatted drive. But you will be able to save the documents to your internal drive. You can move all the external files to your internal drive then format the external drive for Apple. Then you can copy the files back to your external drive for ongoing use.

I am switching to Apple macbook pro from Windows laptop. Is Apple compatible with Microsoft Office? How can I transport from Windows to Mac? What I have saved on external hardrives, will I be able to open it on Mac?

I am switching to Apple macbook pro from Windows laptop. Is Apple compatible with Microsoft Office? How can I transport from Windows to Mac? What I have saved on external hardrives, will I be able to open it on Mac?

Is Apple compatible with Microsoft Office?
Any computer is compatible as long as it can read and write Office files. But for perfect (or at least near perfect) compatibility, you would want to purchase Office 2011 for Mac.
How can I transport from Windows to Mac?
You can't directly transport any installation of Windows. All PC's come with a machine specific version of Windows intended for that PC. They don't have all of the hardware drivers the retail disks cover.
If you want Windows on your Mac, you would first purchase a full version copy (NOT an upgrade disk) of Windows 7 or 8. Those are the only supported versions on newer Macs. You install it through the supplied Boot Camp utility that comes with the Mac to create a new partition for Windows, and then install the retail copy of Windows you purchased.
The reason only these versions of Windows are supported is the same basic reason as a machine specific version of Windows for a PC. Apple only includes the necessary Mac hardware drivers for Win 7 or 8 on new Macs.
Once Windows is installed, you could then install the version of Office for Windows you already own. The nuisance of a Boot Camp partition is that you have to physically boot to either Windows or OS X, so you can only use the apps of the OS you're in at the time. To use both at once, you'd have to use virtual machine software (Parallels, VMware, VirtualBox) and then install Windows within that. Then you'd be able to run Windows inside of OS X and have access to both at the same time.

How to merge partitions in Windows Server 2008 quickly and effectively?

How to merge partitions in Windows Server 2008 quickly and effectively?

Hi,
In Windows systems we can only extend a partition to unallocated space behind it - so if we have 2 consistent partitions, we can only delete the second one and extend the first one.
If the 2 partitions are on 2 different disks, you can also create a spanned volume - you will still need to delete the second partition and convert both disks to dynamic disk to create the spanned volume.
If you have any feedback on our support, please send to [email protected]

How to use itunes for windows server 2003

how to install itunes for windows server 2003

Purchased music from the iTUnes store is in a "AAC protected" format. It can only be used in iTUnes. Any music you buy online these days will have some protection on it where you can only use it in there program.
The way around this is to burn the purchased songs to a CD in iTUnes. Then goto edit>preferences>advanced tab>Import sub tab and set your import settings to something like MP3.
Now put the burned CD back in the PC and "Re"import it into iTunes so its imported in a MP3 format so you can use it in any program. Before importing it tho you need to manually add the name of the song, artist album ect ect

How Configure background update on windows Server

Hi,
I read Admin guide from http://www.adobe.com/devnet/flashplayer/articles/flash_player_admin_guide.html page 17-19 for background update installation and configuration but Document ask to create directory structure in Linux style and i want to configure it on my windows server please advice me how i create directory structure on windows server for background updates.
Your kind response much appreciated.
Regards,
Ahmed

On the Server where you want to share \usr\sap\trans for the landscape( I assume Server1 or PC1 in your terms), login as windows domain admin ( or with admin rights) --> right click my computer --> Manage --> click on Local Users and Groups --> Double click on administrators --> and add users of SAPService<SID> of the other server ( your Server 2 or PC2) and clock pk Ok.
This should resolve the problem.
Concept is, giving other server to read and write access to shared drive of Transport directory. There can be no. of days do implement it depending on in House Windows Skills and Secuirty audits, but the above method works.
Thanks,
Krishna

How to install IE8 on Windows Server 2008 R2 Datacenter?

Hello.
Can anybody tell me, how to install IE8 on 2008 R2 Datacenter?
I've downloaded this http://www.microsoft.com/en-us/download/internet-explorer-8-details.aspx for "Windows Server 2008 64-bit and more..", removed IE11, IE10, IE9 from installed updates, and runned "dism /online /disable-feature
/featurename:Internet-Explorer-Optional-amd64".
And nothing helps. I've got a message "Internet Explorer 8 is not supported on this operating system".

you can't "install" IE8 on WS2008R2, nor on Windows7 - because those OS's shipped with IE8.
IE is an OS component, and so when you "upgrade" or "downgrade" IE, you are affecting an OS component.
What this means is that the "IE8" download you are trying to apply, is actually IE8 for WinXP or maybe WinVista.
You can usually "downgrade" Win7 back to IE8, by uninstalling the newer "upgrade" of IE - this causes the OS to automatically attempt to revert to the prior IE version.
This reversion assumes/requires a healthy OS and component store (CBS), including all the pkgmgr file needed to revert to component.
Sometimes, the component store is damaged, or is missing files.
you may need to check the CBS logfiles, and may need to perform SFC /scannow
You may need to use CheckSUR to repair system health.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How to Setup JMS in Siebel Server

Hi
Currently we have a Requirement to work with queuing System from JMS Queuing
How to Setup the JMS Queuing from Siebel Point of view?
Does JMS Should be Installed in Siebel Server?
Plz Provide Inputs for How to Set up the JMS Queuing Mechanism and Setting up the Queues for Posting and Receiving the Messages from JMS Queues
Thanks & Regards
Rajendra Prasad

Update - it works ! At least I can connect to Mountain Lion (not server) from my iPhone using the VPN Server Configurator app.
Here's what I did :
1) download the app and install
2) setup using the help files on the web page : http://www.greenworldsoft.com/product-vpn-server-help.html
3) at the last stage you need to setup port forwardin on your router
4) under Airport Utility 6.0 you cannot setup ports 500 or 4500 due to BTTM conflicts but setup the other 2 ports (1723 TCP and 1701 UDP), update airport extreme
5) download Airport Utility 5.6 from here : download already extracted utility it is in it's extracted form as is necessary under Mtn Lion (thanks to NetUse Monitor for the download - great app by the way)
6) run 5.6 and setup port forwarding (Advanced-Port Mapping) for the other 2 ports (500 and 4500 UDP), update airport extreme
7) that's it, I was able to connect to the VPN from my iPhone !

How to port forward in windows server 2012 ? for IIS

Hi,
I have windows server 2012 in AWS cloud (Public IP)
Installed IIS 8 and running website in the port 8980 and its working fine (Public IP)
My question is
I have CNAME record in Godaddy in the name of example.com which is pointed to my PUBLIC IP ... its working fine.
But I want to know how to port the 80 request to 8980 in windows server 2012 thanks.
Wes

Hi,
According to your description, my understanding is that you want that example.com(in Godaddy) to transfer corresponding queries(port and website name) to the website on WS 2012(in AWS cloud).
Since your domain example.com is supported by Godaddy, I recommend you to contact the supporter of Godaddyand confirm that if their product supports port forwarding.
In general, if you useWindows ServerInstruction, we may enable NAT(Routing and Remote Service) on network interface to redirect services/ports.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to enable hibernation in Windows Server 2008 R2

Hi
I am using Windows Server 2008 R2. I want to enable hibernation on server 2008 R2. I have checked the feature in power options but it dose not show any option for sleep & hibernation. I have tried to enable from command prompt by using powercfg -h on
but getting error message that this feature is not supported by firmware. I have updated the firmware but still getting same error.
Also checked with powercfg /energy & getting given below errors.
Platform Power Management Capabilities:System firmware (BIOS) does not support S3.
The hardware in this computer does not support the S3 sleep state.
Platform Power Management Capabilities:System firmware (BIOS) does not support S4 (Hibernate).
The hardware in this computer does not support the S4 (Hibernate) state.
Platform Power Management Capabilities:PCI Express Active-State Power Management (ASPM) Disabled
PCI Express Active-State Power Management (ASPM) has been disabled due to a known incompatibility
with the hardware in this computer.
Can anyone suggest me how can I enable hibernation on windows server 2008 R2 64 bit.
Thanks.

Hello,
I hate to suggest the obvious, but i'd say your hardware does not support sleep or hibernate.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

[Forum FAQ] How to install and configure Windows Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely

As we all know,
the Windows Server Essentials Experience role is available in Windows Server 2012 R2 Standard and Windows Server 2012 R2 Datacenter. We can add the Windows Server
Essentials Experience role in Server Manager or via Windows PowerShell.
In this article, we introduce the steps to install and configure Windows
Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely. For better analyze, we divide this article into two parts.
Before installing the Windows Server Essentials Experience Role, please use
Get-WindowsFeature
PowerShell cmdlet to ensure the Windows Server Essentials Experience (ServerEssentialsRole) is available. (Figure 1)
Figure 1.
Part 1: Install Windows Server Essentials Experience role locally
Add Windows Server Essentials Experience role
Run Windows PowerShell as administrator, then type
Add-WindowsFeature ServerEssentialsRole cmdlet to install Windows Server Essentials Experience role. (Figure 2)
Figure 2.
Note: It is necessary to configure Windows Server Essentials Experience (Post-deployment Configuration). Otherwise, you will encounter following issue when opening Dashboard.
(Figure 3)
Figure 3.
2. Configure Windows Server Essentials Experience role
(1) In an existing domain environment
Firstly, please join the Windows Server 2012 R2 Standard computer to the existing domain through the path:
Control Panel\System\Change Settings\”Change…”\Member of. (Figure 4)
Figure 4.
After that, please install Windows Server Essentials Experience role as original description. After installation completed, please use the following command to configure Windows
Server Essentials:
Start-WssConfigurationService –Credential <Your Credential>
Note: The type of
Your Credential should be as: Domain-Name\Domain-User-Account.
You must be a member of the Enterprise Admin group and Domain Admin group in Active Directory when using the command above to configure Windows Server Essentials. (Figure 5)
Figure 5.
Next, you can type the password for the domain account. (Figure 6)
Figure 6.
After setting the credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 7)
Figure 7.
By the way, you can use
Get-WssConfigurationStatus
PowerShell cmdlet to
get the status of the configuration of Windows Server Essentials. Specify the
ShowProgress parameter to view a progress indicator. (Figure 8)
Figure 8.
(2) In a non-domain environment
Open PowerShell (Run as Administrator) on the Windows Server 2012 R2 Standard and type following PowerShell cmdlets: (Figure 9)
Start-WssConfigurationService -CompanyName "xxx" -DNSName "xxx" -NetBiosName "xxx" -ComputerName "xxx” –NewAdminCredential $cred
Figure 9.
After you type the commands above and click Enter, you can create a new administrator credential. (Figure 10)
After creating the new administrator credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 11)
After a reboot, all the configurations will be completed and you can open the Windows Server Essentials Dashboard without any errors. (Figure 12)
Figure 12.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Part 2: Install and configure Windows Server Essentials Experience role remotely
In an existing domain environment
In an existing domain environment, please use following command to provide credential and then add Server Essentials Role: (Figure 13)
Add-WindowsFeature -Name ServerEssentialsRole
-ComputerName xxx -Credential DomainName\DomainAccount
Figure 13.
After you enter the credential, it will start install Windows Server Essentials role on your computer. (Figure 14)
Figure 14.
After the installation completes, it will return the result as below:
Figure 15.
Next, please use the
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with a remote computer. You can use the commands below:
Enter-PSSession –ComputerName
xxx –Credential DomainName\DomainAccount (Figure 16)
Figure 16.
Then, please configure Server Essentials Role via
Add-WssConfigurationService cmdlet and it also needs to provide correct credential. (Figure 17)
Figure 17.
After your credential is accepted, it will update and prepare your server. (Figure 18)
Figure 18.
After that, please type “Y” to continue to configure Windows Server Essentials. (Figure 19)
Figure 19.
2. In a non-domain environment
In my test environment, I set up two computers running Windows Server 2012 R2 Standard and use Server1 as a target computer. The IP addresses for the two computers are as
below:
Sevrer1: 192.168.1.54
Server2: 192.168.1.53
Run
Enable-PSRemoting –Force on Server1. (Figure 20)
Figure 20.
Since there is no existing domain, it is necessary to add the target computer (Server1) to a TrustedHosts list (maintained by WinRM) on Server 2. We can use following command
to
add the TrustedHosts entry:
Set-Item WSMan:\localhost\Client\TrustedHosts IP-Address
(Figure 21)
Figure 21.
Next, we can use
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with the remote computer. (Figure 22)
Figure 22.
After that, you can install Windows Server Essentials Experience Role remotely via Add-WindowsFeature ServerEssentialsRole cmdlet. (Figure 23)
Figure 23.
From figure 24, we can see that the installation is completed.
Figure 24.
Then you can use
Start-WssConfigurationService cmdlet to configure Essentials Role and follow the steps in the first part (configure Windows Server Essentials Experience in a non-domain environment) as the steps would be the same.
The figure below shows the status of Windows Server Essentials.
Figure
25.
Finally, we have successfully configured Windows Server Essentials on Server1. (Figure 26)
Figure 26.
More information:
[Forum
FAQ] Introduce Windows Powershell Remoting
Windows Server Essentials Setup Cmdlets
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

How to setup the MDT Upstream server and down stream server

Hi,
i have configured the MDT upstream server at office1 & i need to setup the downstream server at office2.
Image should be replicate from upstream server to downstream server and image should be build from
downstream server at office2 not upstream server. I need to use LAN network, not MAN network.
How i can setup the downstream MDT server?
Can you please suggest on this.
Thanks!

Hi Meganathen,
I would go for a periodically (scheduled) robocopy. Yes it's perfectly possible to create this with selection profiles and linked deploymentshares, but based on my own experiences and consulting other subject matter experts like MVP Johan Arwidmark, it is
advised to take care of replication yourself by robocopy or by DFSR
This way you are in control, and robocopy is a great tool to take care of replication of files.
To keep in mind your central deploymentshare and branche deploymentshare, you can play with the bootstrap.ini and customsettings.ini, that they will refer to a different deploymentshare location based on default gateway.
See these links for more information:
http://social.technet.microsoft.com/Forums/en-US/1c4bf193-6293-4207-9995-005dd1756fdd/mdt-2010-for-multiple-sites?forum=mdt
http://tech.sportstoday.us/windows_7/fine-tuning-mdt-deployments---creating-a-linked-deployment-share-(part-2)---maintaining-linked-deployment-shares.aspx
Good luck!
If this post is helpful please click "Mark for answer", thanks! Kind regards

How to share file between windows server host and hyper-v windows server ??

Hi there
I installed windows server 2012 r2 as my host windows and again installed windows swrver 2012 r2 on hyper-v in one system .
now when I go to file explorer > netwrok there is no computer name to share file or folder between them
How can join both windows to netwrok place in file explorer to share file and folder
before I try windows 8 as my host and server 2012 r2 as hyper and when I went to file explorer > network there were to pc's there . first windows 8 and second win server 2012
but when both windows are server there isn't and network pc's in network location on file explorer
please help me how can I bring them both server to file explorer > netwrok
Thanks
Regards :
Raha
whit the best regard : Raha

Hi
thanks to you both
but when we install windows server as host there is not our windows in the
Internet\Network and sharing center\ ....... and in the file explorer > network
I found it when I add server host in server manager in guest server and manage it as host server user and then share files and folders from computer management and then create a shortcut from the share folder to desktop
and the did same for guest ... add guest server in server manager in the host server and manage it as guest server user and then share it's files and folders from the computer management and create a shortcut of share folder to desktop
if host windows be a client windows so this is so easy because after we install hyper-v win-server and go to file explorer > network > so we able to see both windows and all files and folders there but if host windows be a win-server we can't see them
in file explorer > network
thanks you both again
Best Regards :
Raha
whit the best regard : Raha

How to Setup Transport on Windows Server

Similar Messages

Maybe you are looking for