How to size the server for NWDI

I've been asked to try to determine the size of the NWDI server for about 20 concurrent users. Can you help with documentation or estimation on server size?

Hi John,
have a look at SAP note 737368, Hardware Requirements for Java Development Infrastructure
Regards
Helmut

Similar Messages

How to active Name Server for NWDI

Hello,
I would you to activate name server for ou nwdi.
The SLD is not installed on nwdi, we use a dedicated SLD Server. The SLD url is filled in the development configuration in CM Services.
From the SLD, in the reservation name part, the "Enable this SLD as name Server for NWDI" button is not available :
I have tries to follow this tutorial, but it is designed for netweaver 7.0 :
http://help.sap.com/saphelp_nw70/helpdata/en/2f/a72f41b239a831e10000000a1550b0/content.htm
Does anyone know how to activate this feature ?
I refer to this button :
Thank for help.

Thanks Irwin !
The button is shown now.
But in the landscape link, our nwdi system did not listed :
I have had one of my nwdi system, choose "add system" in systems tab.
But there is no option :
Thanks

How to change the server for the existing project in netbeans5.5?

we r using netbeans5.5 with visual we pack.
In netbeans for the project properties>run it is not giving in the list box it is only showing sun java system applicationn server 9.
the remaining servers like tomcat and jboss which we have it is not showing .How to get the remaining options?
please let me if any of you know

Do not cross post same questino across different forums.
Changing the SID for existing SAP systems
Markus

Safari and firefox 'cannot find the server' for every other page that i navigate to, unless I turn Wifi off and on. How do I fix this?

Safari and firefox 'cannot find the server' for every other page that i navigate to, unless I turn Wifi off and on. Once i reconnect to the network, the page loads, but after loading a few more pages, the same thing happens all over again.
This happens each and every time, on different Wifi networks, in different locations. On the other hand, I don't ever encounter this problem when I tether my laptop to my mobile phone's 3g/2g network using Personal Hotspot. How do I fix this?

Try this DNS server ...
Open System Preferences > Network > Advanced > DNS
Click + and type:
208.67.222.222
Click + again and do the same.
208.67.220.220
Click OK.
Quit and relaunch both your browsers to test.
If that doesn't help, try here > iOS: Troubleshooting Wi-Fi networks and connections
And here > Wi-Fi: How to troubleshoot Wi-Fi connectivity

How to get the "Key" for Dimension in SSAS.

Hi
How to get the "Key" for Dimension in SSAS.
(Below value is the PPSParameters table XML column value in PPSDatabase in SharePoint.
Below three key values are belongs to "Dimension". I have tried to find the key but I could net get it.)
<NewDataSet>
<UserValues><Key>16A201A9E75128559F947D58E6D187A9</Key></UserValues>
<UserValues><Key>7FBEA449A6ED5606973306445839619E</Key></UserValues>
<UserValues><Key>A8F75F9720817BCD2E1DFC1C1CF1E678</Key></UserValues>
</NewDataSet>
Thanks & Regards
Poomani Sankaran

To Be Honest there is not one straight Cmdlet that atleast I have come across
The best way would if you have Lync monitoring server
Using the Lync Server 2013 Monitoring Server
If you have the Monitoring Server role configured in your environment, and for Lync Server 2013 everyone should!, you can use information contained in the LcsCDR database to pull back the last time a user signed in. You can run the following query* to
pull back the user's SIP URI and their last login time:
USE LcsCDR
SELECT dbo.Users.UserUri, dbo.UserStatistics.LastLogInTime
FROM dbo.UserStatistics
JOIN dbo.Users ON dbo.Users.UserId = dbo.UserStatistics.UserId
ORDER BY UserUri
Which produces the following output:
The advantage to using the Monitoring Server to obtain this data is that unlike the information contained in the rtcdyn database, the information from the LcsCDR data will persist even when the user isn't signed into Lync.
To get approx count of users enable for Lync Server in your organisation
Get-CsUser -Filter {Enabled -eq $true} | MeasurE
Please not the above command let will give you an approx number not exact
From the Monitoring report yet the SIP account that signed in and then from count find out how many user havent signed in this is manual task
Hope this is helpful
Please remember, if you see a post that helped you please click ;Vote As Helpful" and if it answered your question please click "Mark As Answer" Regards Edwin Anthony Joseph

How can delete the serve.bannersdontwork virus from Safari on Mac?

Hello @all,
How can delete the serve.bannersdontwork virus from Safari on Mac?
About every 8-20 clicks Safari opens a webside named serve.bannersdontwork.
I can not remove this with my Avira antivirus programm.
Can anybody help me?
THX
Hallo an alle,
Ich habe mir einen Virus eingefangen, serve.bannersdontwork, auf Safari.
Alle 8-20 clicks öffnet sich diese Seite "serve.bannersdontwork" und leitet mich auf andere weiter.
Über mein Antivirusprogramm Avira konnte ich den Virus nicht beheben.
Auch die erweiterung AdBlock hilf hier nicht weiter.
Wer weiß, oder hat eine Ahnung, wie man diesen Virus wieder los wird?
Danke schonmal im voraus!!

From the Safari menu bar, select
Safari ▹ Preferences ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.
If you wish, you may be able to salvage the errant extension by uninstalling and reinstalling it. Its settings will revert to their defaults. If the extension still causes a problem, remove it permanently or refer to its developer for support.

How to specify Host Server for Replicated Virtual Desktops within RDVH Collection

My question about how to specify Host Server for Replicated Virtual Desktops within Collection.
I know there is a aswered thread on this, but that solution (wait a week) didn't work for me.
So i have 2 servers, RDS01 and RDS02 with both 15 Hyper-V VM's and replicating to eachother. That part works fine.
Now I wanted to make it easy for my users I build a Connection Broker: RDCB
All went fine in that setup, but when I want to add the existing VM's from RDS01 and RDS02 to the collection it just radomly adds running ones and replicated ones.
So both RDS01 and RDS02 have 15 VM's running and 15 replica's in stopped state, but when I look in my collection, it says RDS01 has 23 and RDS02 has 7 VM's. When I add them all, I see he wants to add a lot of stopped states replica's from RDS01 instead of
the running ones from RDS02.
How can I specify which one he should use? Or need I disable replication first, setup the whole RDCB collection thing, and then turn replication back on? Or does Hyper-V replication not work at all when used in a collection?
I hope someone can help out here. I'm googling and trying for 1,5 week now, but i can;t get it right.
Thanks in advance.

Hi Robin,
Thanks for your patience.
After you removed Replication from 1 machine on both RDS01 and RDS02, please restart that machine. After that, please add this machine to the RD collection again to test how the issue goes.
As we know, Hyper-V Replica provides asynchronous replication of Hyper-V virtual machines between two hosting servers. It is simple to configure and does not require either shared storage or any particular storage hardware. Any server workload that can be
virtualized in Hyper-V can be replicated. Replication works over any ordinary IP-based network, and the replicated data can be encrypted during transmission. Hyper-V Replica works with standalone servers, failover clusters, or a mixture of both. The servers
can be physically co-located or widely separated geographically. The physical servers do not need to be in the same domain, or even joined to any domain at all.
Currently, would you please add only running state VMs to the RD CB collection? And would you please capture some screenshots of the error message? Thanks very much for your cooperation.
Best regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to run the Server Side Existing rule in Exchange 2010

Hi All,
There were requirement to create a auto forward rule for almost more than 5000 users, which we did, but the we want to apply this rules to the messages which are already in the inbox for all those users where we have created the rule.
Right now the problem what we are facing is for each individual we have to take full access to their mailbox and execute the rule first time and then it works.
this is becoming challenging for us to making this for all 5000 users. the other problem is those user are not regularly login to this mailbox, they are using some other Org mailbox, so even we can not communicate to all of them.
Q1) How to run the Server Side Command which should forcefully apply whatever rules is created for that user should execute for the messages which are already in the inbox.
Q2) or the powershell for for specific rule name, which can apply on the for all the messages which are there in the inbox.
Any help would be appriciated!
Thanks in adv champions!
Ashku

Hi Ashku,
If these 5000 users are all users in your Exchange organization, a inbox rule can be created by the following commands:
Get-Mailbox | foreach {New-InboxRule -Mailbox $_.Name -Name AutoForward -From [email protected] -ForwardTo UserB}
Based on my test, the Inbox rule created in server side also cannot work on the message that have already been in the Inbox unless users click “Run Rules Now…” in their Outlook client. And the transport rule in Exchange server only works
during the message sending process.
Therefore, there may be no feature in Exchange server side to meet your requirement.
Thanks for your understanding.
Thanks,
Winnie Liang
TechNet Community Support

How to start the server. Urgent.

I mistakenly deleted the icon from the Start menu, to start the SAP IDES server in my laptop. How to start the server from any other path.
I installed it in E drive (2003 server). Database path is F drive.

Hi,
Check the following path
E:\Program Files\SAP\FrontEnd\SapGui
Here the actual Logon Pad file would be stored with name "SAPLOGON" or "SAPLGPAD".
Create another shortcut for above file on your desktop.
Best regards,
Prashant

How to install the B1iP for 2007.

Hi, all
Does anyone know how to install the B1iP for 2007.
I tried but this message was occured.
"new:
127.0.0.1"\SBO_SHR\B1is\apps\PaymentEngine Neither share folder "B1_SHR" nor "SBO_SHR" exist!"
Acctualy there is no such folder.
Should I create the folder by myself?

Hello Erika and Moutain,
Please kindly make sure B1iP is installed in the B1 Server machine. If it is B1 Server, suppose there should be a shared forlder created: B1_SHR or SBO_SHR after B1 Server Installation. B1_SHR or SBO_SHR folder is used to store the client instllation, online help files and working folder for the PaymentEngine in B1 2007 A PL. The error message occurrs during the PaymentEngine B1iApplication instllation. But since B1 2007 A PL 38(including PL38), this error message should be not there anymore. So if you are working with the version earlier than 2007 A PL38, please upgrade the latest version PL39. By the way, of course you can create the shared folder (B1_SHR) and share it by mannual, but it should be created by B1 Server installation. Thanks.
Kind Regards
-Yatsea

How to increase the time for detect a device down on Prime 2.0

Hi,
I would like to know how to increase the time for detect when a device has lost connection, currently I monitor several stand alone Access Points that are paleced on differents locations connected to prime through 256 Mbps Links, so when the location has very high bandwith utilization, an e-mail notification about the unreachable Access Point is sent, but if we check te reachability, the Access Point is reachable, and we don´t want to receive to many of this notificatios,
thanks for your help

Go to the Console, Select the server --> configuration --> tuning tab,
Stuck Thread Max Time and Stuck Thread Timer Interval (give your required time)
This will definitely increase the Stuck Thread time interval.
or
by using work manager also you can define Stuck Thread Max Time interval by editing deployment descriptor file
<work-manager>
<name>wm_name</name>
<max-stuck-thread-time>30</max-stuck-thread-time>
<stuck-thread-count>5</stuck-thread-count>
</work-manager>

I deleted a message from iCloud mail. It says it is saved on the server for 1 month. Can I get to it?

I deleted a message from my iCloud mail (and emptied the trash) on my MAC that I didn't mean to. In my iCloud IMAP settings it says that deleted mail will be saved on the server for 1 month. How do I get to it?

Go to http://www.icloud.com and go to the Mail page there. Open the Trash mailbox. If the message is there you can move it out. If it isn't, then I'm afraid it's gone. The 'delete after x days' setting in the Mail application is over-ridden by the automatic deletion in the iCloud server - I have an idea that's 7 days but I'm not sure.

How to configure SMTP server for osb 10.3.1

Hi All,
Can anyone share information on how to configure SMTP server for osb 10.3.1
and then how to send an email from osb 10.3.1
Thanks in Advance!!

Thanks a lot!!
I configured the same way. When I am sending email to an account on the same domain as my SMTP server is the sending of email is successful. But its giving error when I am trying to send an emain to an account which is on different domain. It giving error as "Operation has been cancelled"
Please suggest something.

Old school with CS2. Haven't used in a while and am unable to use the program as it says my serial number is invalid. Customer service tells me the server for CS2 has been shut down. Then they sent me here for help. Does anyone have any advice?

I don't have a clue what I am doing with this. Here is my discussion with Customer Service:
Naresh: Hello! Welcome to Adobe Customer Service.
Naresh: Hi Mary.
Naresh: I understand you have been getting invalid serial number, am I right?
Mary Vance: Hi
Mary Vance: yes
Naresh: Please provide me with the serial number, Mary.
Mary Vance: I provided my serial number here
Naresh: Thank you for the serial number.
Naresh: Please allow me 2-3 minutes while I check your serial number.
Mary Vance: no problem
Naresh: Thank you.
Naresh: Thank you for being online.
Naresh: I would like to inform you that the server for CS2 products have been shut down by adobe since then you are not able to install the product.
Naresh: However, I will provide you the link to download CS2 application. Please visit the following link.
Mary Vance: will this allow me to reinstall Photoshop?
Naresh: Yes, Mary.
Mary Vance: ok...what is that link?
Naresh: Please clcik here to download.
Mary Vance: thank you....trying it now
Naresh: You are welcome.
Naresh: I will also provide you the link for further information regarding the installation of CS2 products.
Mary Vance: the download doesn't have anything regarding installation
Naresh: Please click for the information.
Naresh: I am sorry for providing wrong link.
Naresh: Please click here to download.
Naresh: The 3rd link is for the download of CS2 Photoshop.
Naresh: Were you able to view the download link, Mary?
Mary Vance: what file in that download is supposed to help me?
Mary Vance: the first and 3rd link were the same
Mary Vance: when trying to load from my software, I get the message saying my serial number is not valid. All I need is a serial number that works. Is that going to be possible?
Naresh: Mary, Adobe has disabled the activation server for CS2 applications, including Acrobat 7 and Audition 3, because of a technical issue.
Naresh: So you will have to download the software from the above link.
Naresh: May I know in what OS you are trying to install the software?
Mary Vance: the link sends me to a CS2 help package
Mary Vance: windows 7
Naresh: I am sorry you will not be able to install the CS2 application on Windows 7 since it does not support CS2 version.
Mary Vance: I have had on here for a few years...why all of a sudden would it not work? Illustrator is fine.
Naresh: Okay.
Naresh: You can try downloading the software.
Mary Vance: was the original link that you sent me suppose to allow me to download Photoshop?
Mary Vance: I did try and got the message that the serial number is invalid. Is there any way to get around this or should I throw it away?
Naresh: May I know whether you uninstalled the product.
Naresh: ?
Mary Vance: I did uninstall Photoshop only. Then I tried reinstalling Photoshop only and got the message about the serial number.
Naresh: I check and see that it seems to be a technical issue, I request you to please post your query to the forums so that you will get the resolution from our expertise and I'll provide you the link to visit the forums.
Naresh: Please click here to visit the forums.
Mary Vance: I guess I will try that.
Naresh: Yes, please.
Naresh: Is there anything else I can help you with?
Mary Vance: I don't see where you helped me with this yet, so I guess not!
Naresh: I am sorry for the inconvenience.
Naresh: Thank you for contacting Adobe. We are available 7 days a week, 24 hours a day. Goodbye!
Any help would be appreciated.

CS2 is very old and reached its "end of life" a while back. So probably won't run on modern operating systems. If you can still run it, you'll need to uninstall what you have and re-install with the download link below to activate it.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Nancy O.

In VB Programming code -- How to access the formula for suppressing a field

In VB Programming code -- How to access the formula for suppressing a field
I am using Crystal Reports 2008 v1
Using VB code, I am attempting to modify a Crystal Report before exporting it into a PDF format and then displaying it on the Web.
My problem is that I am unable to access the formula used to dynamically suppress a field.
The following code is working:
mySections = rd.ReportDefinition.Sections
For Each mySection As CrystalDecisions.CrystalReports.Engine.Section In mySections
   ' myFieldToChange is a String set to the text of the field I need to adjust the Suppression
   iloop = 0
   For Each RecObj As CrystalDecisions.CrystalReports.Engine.ReportObject In mySection.ReportObjects
           If mySection.ReportObjects.Item(iloop).Name.ToLower = myFieldToChange Then
               myTextObject = CType(mySection.ReportObjects.Item(iloop), CrystalDecisions.CrystalReports.Engine.TextObject)
               myTextObject.Text = "new field text goes here"
               mySection.SectionFormat.EnableSuppress = True
               ' Here is where I want to change the formula for the Suppression
            End if
            iloop = iloop + 1
    Next
Next
I can not find any reference to the actual suppression formula in the SDK help file.
Note, the EnableSuppress can be set to True for False, but if there is a formula for dynamic suppression, the True or False value is overwritten. The results of the formula determine the suppression.
Is there a way to reference this formula. I know that I can put on in using the Crystal Report Designer software, I need to modify this formula using VB code and the SDK.

Hello, Mark;
If you are using the ReportDocument object you do not have access to the Conditional Suppression formula. You can get around it by using a formula field in the report for the supression and then using the FormulaField code to change it at runtime.
If you want to change the supression condition directly at runtime you need to use RAS and the ReportClientDocument.
Elaine

How to size the server for NWDI

Similar Messages

Maybe you are looking for