How to active Name Server for NWDI

Hello,
I would you to activate name server for ou nwdi.
The SLD is not installed on nwdi, we use a dedicated SLD Server. The SLD url is filled in the development configuration in CM Services.
From the SLD, in the reservation name part, the "Enable this SLD as name Server for NWDI" button is not available :
I have tries to follow this tutorial, but it is designed for netweaver 7.0 :
http://help.sap.com/saphelp_nw70/helpdata/en/2f/a72f41b239a831e10000000a1550b0/content.htm
Does anyone know how to activate this feature ?
I refer to this button :
Thank for help.

Thanks Irwin !
The button is shown now.
But in the landscape link, our nwdi system  did not listed :
I have had one of my nwdi system, choose "add system" in systems tab.
But there is no option :
Thanks

Similar Messages

  • How to size the server for NWDI

    I've been asked to try to determine the size of the NWDI server for about 20 concurrent users.  Can you help with documentation or estimation on server size?

    Hi John,
    have a look at SAP note 737368, Hardware Requirements for Java Development Infrastructure
    Regards
    Helmut

  • How to specify Host Server for Replicated Virtual Desktops within RDVH Collection

    My question about how to specify Host Server for Replicated Virtual Desktops within Collection.
    I know there is a aswered thread on this, but that solution (wait a week) didn't work for me.
    So i have 2 servers, RDS01 and RDS02 with both 15 Hyper-V VM's and replicating to eachother. That part works fine.
    Now I wanted to make it easy for my users I build a Connection Broker: RDCB
    All went fine in that setup, but when I want to add the existing VM's from RDS01 and RDS02 to the collection it just radomly adds running ones and replicated ones.
    So both RDS01 and RDS02 have 15 VM's running and 15 replica's in stopped state, but when I look in my collection, it says RDS01 has 23 and RDS02 has 7 VM's. When I add them all, I see he wants to add a lot of stopped states replica's from RDS01 instead of
    the running ones from RDS02.
    How can I specify which one he should use? Or need I disable replication first, setup the whole RDCB collection thing, and then turn replication back on? Or does Hyper-V replication not work at all when used in a collection?
    I hope someone can help out here. I'm googling and trying for 1,5 week now, but i can;t get it right.
    Thanks in advance.

    Hi Robin,
    Thanks for your patience.
    After you removed Replication from 1 machine on both RDS01 and RDS02, please restart that machine. After that, please add this machine to the RD collection again to test how the issue goes.
    As we know, Hyper-V Replica provides asynchronous replication of Hyper-V virtual machines between two hosting servers. It is simple to configure and does not require either shared storage or any particular storage hardware. Any server workload that can be
    virtualized in Hyper-V can be replicated. Replication works over any ordinary IP-based network, and the replicated data can be encrypted during transmission. Hyper-V Replica works with standalone servers, failover clusters, or a mixture of both. The servers
    can be physically co-located or widely separated geographically. The physical servers do not need to be in the same domain, or even joined to any domain at all.
    Currently, would you please add only running state VMs to the RD CB collection? And would you please capture some screenshots of the error message? Thanks very much for your cooperation.
    Best regards,
    Sophia Sun
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • How to configure SMTP server for osb 10.3.1

    Hi All,
    Can anyone share information on how to configure SMTP server for osb 10.3.1
    and then how to send an email from osb 10.3.1
    Thanks in Advance!!

    Thanks a lot!!
    I configured the same way. When I am sending email to an account on the same domain as my SMTP server is the sending of email is successful. But its giving error when I am trying to send an emain to an account which is on different domain. It giving error as "Operation has been cancelled"
    Please suggest something.

  • Adobe digital editions activation errer server for my computer, what do I do

    adobe digital editions activation errer server for my computer, what do I do

    You can do it with Calibre.   http://calibre-ebook.com/
    You can do it in one step very easily without too much control,
    or via HTML, add your style sheet manually, then to epub (I haven't tried this).
    In fact, Calibre will also transfer to an ereader and no need to use ADE at all.
    (I only use ADE rather than Calibre where there is a DRM file involved.)
    There are quite a few other software that will do it as well.

  • Activating TimeMachine Server for Active Directory Users

    Currently we'd like to switch to Active Directory and I tried it out with our Test environment, setuped an Active Directory Server and joined a OSX Mavericks Server. So far so good I can manage all my AD users, but when I click on "Edit Access to Services" I can activate anything for my AD user BUT not Time Machine!
    Does anyone knows why and if there is any workaround to make it work? For other Network (Open Directory) and Local Users I can activate it.

    sorry.. I am soooooo stupid... I have to activate "File Sharing" as well.. for the user everything was already pre-activated, not for the AD users, I just saw the Time Machine checkbox grayed out ...

  • How effective is air server for pc with apple tv?

    I am considering downloading air server for my PC to use with apple tv. Why should I do it and why shouldn't I do it?

    AirParrot is an option.

  • Can't figure out how to install sql server for PHP

    I am trying to install SQL Server for PHP on a server with Server 2008 32 bit.  The exe from http://www.microsoft.com/en-us/download/details.aspx?id=20098 keeps tell me that it is an invalid win32 application.  I've tried running as administrator
    as well.  Somewhere I read you need to open the exe with 7zip.  I was able to do that and see all the files in there, but where do I go from there?
    Thanks
    Mike
    edit: forgot to mention I'm using Apache for my server

    That solution is obsolete. The current solution is here:
    http://msdn.microsoft.com/en-us/sqlserver/ff657782.aspx
    bill ross

  • How to install http-server for already installed apex

    Hi,
    due to networkcardtroubles I have to reinstall http-server. i have copied marvel.conf and marvel/images.
    i have already reinstalled http-server, getting the htttp://host:7777-page, and have copied marvel.conf (and marvel/images) to the right directory.
    but if i go to http://host:7777/pls/htmldb the result is "page not found"
    how to combine http-server with apex ?
    any reaction will be appreciated
    Leo

    Jes,
    [Sat Mar 17 10:32:09 2007] [notice] FastCGI: process manager initialized
    [Sat Mar 17 10:38:57 2007] [notice] FastCGI: process manager initialized
    [Sat Mar 17 10:39:02 2007] [error] [client 127.0.0.1] [ecid: 1174124342:169.254.78.194:1416:196:1,0] File does not exist: c:/oracle/product/10.1.0/htmldb/apache/apache/htdocs/pls/htmldb
    What went wrong ? (These files - indeed - don't exist on my computer).
    I reinstalled only http-server form the companion CD, not htmldb (assuming to get htmldb 1.5) . Do I have to reinstall both ?
    Leo

  • How to Setup deducated server for FR Repoting and Consolidation

    Hi experts,
    We have an issue where running FR reports slow down HFM for users. We were thinking of dedication 1 server for FR reporting and another for consolidation. I read the 9.3.1 manual and it says it is possible to do that. However, no steps were provided.
    Can anyone please shed some light on the steps we need to perform ?
    Thnaks a lot for your help in advance

    >
    Hello!
    I have downloaded the SPARC ISOs for Solaris 9 from
    sun.com, and I have tried many times to set up Install
    server (Solaris 9) for SPARC machines on an Intel PC,
    but I always get the following error.
    I take it you're running solaris x86 on that intel pc?
    bash-2.05#
    /cdrom/cdrom0/Solaris_9/Tools/setup_install_server
    /export/home/sol-sparc/
    ERROR: Install boot image
    /cdrom/cdrom0/Solaris_9/Tools/Boot does not exist
    Check that boot image exists, or use [-t] to
    specify a valid boot image elsewhere.
    bash-2.05# If you do a "cd /cdrom/cdrom0/Solaris_9/Tools/" and then do an "ls" do you see the Boot directory? Is there anything in that directory? That's the software 1/2 CD you're running that command from right?
    Thanks,
    Daryl

  • How to use DNS server for name resolution for items which don't exist in active directory domain controller DNS

    Dear Experts,
    In our office we have a domain controller call it 'Office.com', all computers and corporate servers e.g. exchange, antivirus etc. are member of this 'office.com', it is also having a DNS. All users in office have there preferred DNS set to the corporate
    DNS
    We are working for ministry and offering services to them from our data center so have many servers which are for ministry but they are in our data center. For all these servers we created another DNS server which contains all entries for these servers in
    forward and reverse lookup zones. In this DNS we also created a forward lookup zone for our corporate servers and zone name is 'office.com'
    What we are trying to have is name resolution of all servers which are listed in other DNS build in our office on Win 2008 R2 for ministry servers
    If the user change his preferred DNS to ministry DNS he can resolve the ministry server but then we can not control any thing through group policy since they are using other DNS and not the corporate DNS. 
    How this can be done ? like any group policy applied to corporate domain controller must take effect on users and in addition to this user must also be able to resolve server names in ministry project DNS
    Please assist ASAP.
    regards,

    Hello,
    ok so the GPO setting doesn't apply in any case.
    Clients machines use the first DNS server in the list of configured ones on the NIC. If that one is available search for additional DNS servers will stop.
    What i can not really understand is your description about the second DNS server. This should normally either another DC with AD integrated DNS, so everything is replicatedwithin AD replication or you use a secondary DNS on domain member server that pulls
    the informations from the Master.
    It sounds for me that you have configured a machine with DNS server role and created manually the zone with the same name as the domainand manually create there the required A records?
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://msmvps.com/blogs/mweber/
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.

  • How to make a server for field "Server name"[ON HOLD]

    <p>How do you create a server to connect to. i circled the part that i need</p><p>i need to make the server but i dont know how to make it this is what is say
    server name
    i want to know how to make the server

    Please try to clarify the question  again :-(
    I am sorry, but it is not clear to me, what you are asking.
    what is "make the server"?
    The server is an application created by Microsoft, you do not need to make it. did you mean install the SQL Server? or maybe how to connect the SQL Server after you installed it?
      Ronen Ariely
     [Personal Site]    [Blog]    [Facebook]

  • How to configure mail server for subscription

    Hi,
    I want to test subscription. My problem is how to configure the mail server.
    As to my understanding, we need first configure mail server, then the user can choose "Subscribe" in the Details screen of a folder.
    My steps are:
    1. In KM - CM - Utilities - Channels, specify SMTP server, userId and password.
    2. In KM - CM - Utilities - Channel originators, set the Original address for notificator.EMAIL.
    3. In KM - Collaboration - Groupware Transport - Mail Transport, specify SMTP server and sent message folder.
    After that, when I choose a user and click "Send email", it failed saying "Failed to communicate with SMTP server when sending the email.".
    Could anyone tell me what's wrong with my configuration, or what should I do to make subscription work?
    Thanks,
    Ray

    Hi Vineeth,
    Thanks for help.
    According to your steps:
    1. set up a mail transport and making notification and mailing service active.
       In System admin - KM - CM - Global services, I've enabled Inbox, Mailing and Notification services.
      In KM - CM - Collaboration - Groupware Transport, I've set up a mail transport:
      Name: JavaMailTransport
      SMTP Server: smtp.yahoo.com
      Sent message folder: /documents
      System alias name: mytransport
    2. Give everyone read permission on notifications in KM.
      Where can I set user's permission on notifications? I think you mean folder /etc/notifications, but I don't know how to set permissions.
    3. Check if proper id's are maintained in users profile.
      How to do this?
    Thanks for help~~
    Regards,
    Ray

  • How To Active/Passive Mode for FTP Adapter?

    Hi there,
    For one of our adapters we need to communicate with a FTP server which only accepts FTP connections in active mode. It seems that Xi uses by default the FTP passive mode.
    The question is; is it possible to switch to the active mode? and How to do that?
    Any feedback is appreciated.
    Rob.

    Hi Robert,
    Did you get through this problem?
    Looks like we are also facing a similar issue and want to find out if it is possible to switch to active mode?
    Regards,
    Prasad

  • How to install DAC server (for OBIA v7963) on linux ?

    Guys - I am in the mid of installing OBIA v7963 on linux x64 . And right now I am doing the DAC server installation part .
    The installation guide http://docs.oracle.com/cd/E20490_01/bia.7963/e19038/windows_ic.htm#BABHDEJJ clearly says that we have to install
    DAC server on windows box first and then copy it over to linux . crude and cumbersome !! As per this guide - there is no way to directly install it on linux .
    Where as the downloaded DAC s/w has a runInstaller which works in a 32 bit linux shell (not in 64 bit shell) . I did it and the installation went fine .
    This is how it is done in our environment . My question is : why does the installation guide say nothing about this easy way of installing it ? And how
    do you guys do it usually ? What's the best practice ?

    You are right RM . I straight away installed it on linux . Me installing DAC for the first time - I had no other choice than following this installation guide
    http://docs.oracle.com/cd/E20490_01/bia.7963/e19038/windows_ic.htm#BABHDEJJ
    But this method of directly installing on linux is no where said in the guide . I wonder why ? And the very purpose of having a installation guide is defeated here .
    I have seen typos in oracle documentation . But this is a huge huge miss in the documentation . I can't believe it .
    Thank You .

Maybe you are looking for