How to Skip validation

Hi ,
I am using Jdeveloper 11.1.1.3 .I am having an af:table in my page, and i have a command link which calls a method in a backing bean. While clicking on the command link i want to skip the validations that happens in the table rows, without using immediate="true"
Is this possible?
Expecting some guidance.

Hi,
If i use immediate property am getting one another problem. I have two operations to be done ,one is to create a new record and another one is to delete a record.
I have two command links.*Add link* is using CreateInsert and Delete link is using Delete operations. I am explaining the problem bellow.
1.I have two LOV fields in the row.First i insert a row and fill values in the two LOV fields *(for example 1st field-"AB" 2nd field-"1234")*.
2.I delete this record using Delete command link.
3.Then again i insert a new row using Add command link.
4.In this new row in the first LOV field i give the same value that i gave last time -that is "AB". While giving this value it automatically brings up the value "1234" in the second field.
This happens only if i set true to the immediate property of the Delete command link.I have not used any ppr also.If i dint set the immediate property then the insertion and deletion works fine,but it is doing validation when i click these links.So i want to skip the validation while clicking Delete link.

Similar Messages

How to skip validations in ADF on click of cancel button

Hi,
I am new to this technology. i Have used ADF components required property to do Required filed validations. Whne i click on Cancel button i dont want the validations to get executed. How to skip validations in ths case?
I am using ADF 11g and JSF 2.2

Set immediate property of the cancel button to true.
Check this out.
http://jobinesh.blogspot.com/2009/08/how-to-skip-validation.html
-Arun

How to skip validation using serverListener

Hi,
I am using Jdev 11.1.2.3.0
My requirement was to called some action using the keyboard key.
I tried with Access key first but its behaving differently in different browser.
Crome: allowing action on access key press.
IE : setting the focus on commandLink.
Note : I have defined accessKey for RichCommandLink.
Then i used the different approach which is as follows:
1- Register the keyBoard handler to document. on beforePhase Event.
2- Added the js file as follows :
Javascript file:
var keyRegistry = new Array();
keyRegistry[0] = "alt 1";
keyRegistry[1] = "alt 2";
keyRegistry[2] = "alt 3";
keyRegistry[3] = "alt 4";
keyRegistry[4] = "alt 5";
keyRegistry[5] = "alt 6";
keyRegistry[6] = "alt 7";
keyRegistry[7] = "alt 8";
keyRegistry[8] = "alt 9";
keyRegistry[9] = "alt 0";
function registerKeyBoardHandler(serverListener, afdocument) {
_serverListener = serverListener;
var document = AdfPage.PAGE.findComponentByAbsoluteId(afdocument);
_document = document;
for (var i = keyRegistry.length - 1; i >= 0; i--) {
 var keyStroke = AdfKeyStroke.getKeyStrokeFromMarshalledString(keyRegistry);
AdfRichUIPeer.registerKeyStroke(document, keyStroke, callBack);
function callBack(keyCode) {
var activeComponentClientId = AdfPage.PAGE.getActiveComponentId();
// Send the marshalled key code to the server listener for the developer
// To handle the function key in a managed bean method
var marshalledKeyCode = keyCode.toMarshalledString();
AdfCustomEvent.queue(_document,
_serverListener, {keycode:marshalledKeyCode,
 activeComponentClientId:activeComponentClientId}, true);
// indicate to the client that the key was handled and that there
// is no need to pass the event to the browser to handle it
return true;
*jspx page:*
 <f:view beforePhase="#{KeyboardHandler.registerKeyboardMapping}">
<f:loadBundle basename="properties/Labels" var="labels"/>
<af:document id="adfDocument">
<af:resource type="javascript" source="/js/keyboard.js"/>
<af:serverListener type="keyboardToServerNotify" method="#{KeyboardHandler.handleKeyboardEvent}" />
</af:document>
</f:view>
*Java Code :*
 public class KeyboardHandler {
public KeyboardHandler() {
super();
public void registerKeyboardMapping(PhaseEvent phaseEvent) {
if (phaseEvent.getPhaseId() == PhaseId.RENDER_RESPONSE) {
FacesContext facesContext = FacesContext.getCurrentInstance();
ExtendedRenderKitService extRenderKitService =
Service.getRenderKitService(facesContext,
ExtendedRenderKitService.class);
List childComponents = facesContext.getViewRoot().getChildren();
//First child component in an ADF Faces page - and the only child - is af:document
//Thus no need to parse the child components and check for their component family
//type
String id =
((UIComponent)childComponents.get(0)).getClientId(facesContext);
StringBuffer script = new StringBuffer();
script.append("window.registerKeyBoardHandler('keyboardToServerNotify','" +
id + "')");
extRenderKitService.addScript(facesContext, script.toString());
public void handleKeyboardEvent(ClientEvent clientEvent) {
String keyCode = (String)clientEvent.getParameters().get("keycode");
System.out.println("KeyCode ::"+keyCode);
//Here on basis of numeric key 0-9 i will decide different action
This is working fine and launching the first action successfully.
*Now problem is that when i invoked second action its asking me enter data for required fields.*
If i was invoking serverlistener from button than I can control immediate property of command button. but here serverListener is getting called form document. How can I avoid validation here.
Can anybody please me?
Thanks a lot in advance.
-Amit Sharma
http://amit-adf-work.blogspot.com/

If you want to skip all validation until time of commit you can do as described here
http://andrejusb.blogspot.com/2012/12/skip-validation-for-adf-required-tabs.html

How to skip validation for tag file, or jsp fragment?

hi
I have some jsp fragment and tag file in a workshop 10 project
workshop blame me about the jsp fragment (no start/end tag)
and unable to publish to server
is there a way to skip validation on some files?
I do found an check box call "validate JSP fragments" and I have un-ticked it. It does nothing.
please help

Yes, you can turn off validation either on project/folder/individual file.
Project:
Project > Properties - Validation AppXRay - un-check "Validate Workshop managed documents" (this is not recommended, you may loose entire AppXRay validation).Folder:
Project > Properties - Validation AppXRay - Exclude Folders tab, if all the JSP fragments are present in a particular folder (under WebAppRoot), you can pick that folder to be excluded from AppXRay validationFile:
Help > Help Contents - BEA Workshop User's Guide > Common IDE Tasks > "Using AppXRay" - Live Synchronization of artifacts with AppXRay - On this page scroll to the bottom you will find a table with list of comments that can be included in a JSP file to exclude file level validation.Ex:
<%--<nitrox:set-property property="validation" value="true"/> --%>
Controls all validation in the IDE. The default value of true enables validation.

How to skip validation on page refresh

Hello,
I found related posts but they don't point me in the direction of a possible solution.
I have a simple page
<HTML>
<HEAD>
<title>Page 3</title>
</HEAD>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<body>
<f:use_faces>
<h:form id="form1Id" formName="form1">
<h:input_text id="form1Input" valueRef="UserSettings.newEmail"><f:validate_required /></h:input_text>
<h:output_errors for="form1Input" />
<h:command_button id='Page3CommandId' commandName='ok' label='ok' action='success'/>
</h:form>
</f:use_faces>
</body>
</HTML>
If I first load it, it works ok, but if I refresh (or revisit the page), a validation error is rendered.
Is there anyone who can point me to a possible workaround or point me to some reading material that could help me move forward.
Thanks,
Peter

Thanks for the reply. As far as I understood all this, the UserSettings bean is in session scope.
The faces-config.xml file contains
<managed-bean>
<managed-bean-name>UserSettings</managed-bean-name>
<managed-bean-class>webrss.UserSettings</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>

Skip validation on page definition

Hi all,
That article explain how to skip validation using page definition
http://mahmoudoracle.blogspot.com/2011/08/skip-validation-in-adf.html
Thanks

chk this
http://jobinesh.blogspot.com/2009/08/how-to-skip-validation.html

XML Validation in PI 7.1 - Restart and skip validation possible, but how?

Hello all,
I read about schema validation in PI 7.1 and did a few tests on my own, but could not restart and skip validation for invalid payloaded messages. The documents say it is possible.
Anyone know how? Thanks.
BTW, I really think putting the schemas in server file system will cause a lot of authorization trouble in enterprises. No one gives access to the server filesystem and I don't think they will also like to open the required subdirectories for share. Asking the basis team to create the folder structures and maintaining schemas would be another pain. Don't you also think that SAP could find a better approach, like automatically uploading the schemas to the filesystem, or validating them from repository directly if possible?
Kind regards,
Gökhan

Hi Gökhan,
I am facing the same issue.
I set up outbound xml validation in receiver agreement and tested it with valid and invalid messages.
The validation works fine.
But in case of validation error I tried to restart with skipping the validation. But this wasn't possible.
I am always facing the same valdiation error.
I already tried all different tools I know (sxi_monitor, message monitoring in rwb and in nwa)
I am working on PI 7.11 SP6
Did you find a solution for skipping the validation for a single message out of the monitoring?
I know that there is the possibility of deactivate the validation in receiver agreement but thid doesn't meet the requirement of skip the validation only for a single message.
Maybe anyone else faced and solved this issue already.
Thanks in advance
Jochen

Skip Validation

Hey Guys,
I have a bad case that I need a help in it as follow:
I'm using RAD 7.5 with WAS 6.1 to develop portlets, in one of my portlets I have a case in which I need to skip validation after I change the value selected in a dropdown menu. I'm using 'onchange="submit()"' and a valueChangeListener attributes of the dropDownMenu to populate some fields in the same page, but when the form submitted the fields were validated and many validation errors appeared, how can I skip validation in this case and avoid the appearance of the error messages.
can anyone give me a hand?
Thank you for help in advance.

Add immediate="true" to the dropdown component only and add FacesContext#renderResponse() call to the valueChangeListener method which is bound with the dropdown component.

Skip validation when clicking cancel button in Applications panel

Validation skipping can be done by making 'immediete' property to 'true'. But in fnd ApplicationsPanel, cancel button don't have an 'immediete' property. Only revert button has that property. So how can I skip validation when the cancel button is pressed?

Hi Shaik,
<li> You need to set Function type E to Application toolbar button.
<li> Go to PF Status of the screen -> Click on application toolbar->Double click on button->It takes you to Function attributes Popup->There , u will see Function code after that Function type. Select or give type to E.
<li> Write this piece of code in PAI.
PROCESS BEFORE OUTPUT.
MODULE status_2200.
PROCESS AFTER INPUT.
MODULE skip_mandatory AT EXIT-COMMAND.
*& Module SKIP_MANDATORY INPUT
MODULE skip_mandatory INPUT.
IF sy-ucomm = 'TEST'.
 LEAVE TO SCREEN 2000.
ENDIF.
ENDMODULE. " SKIP_MANDATORY INPUT
I hope that it solves your problem.
Thanks
Venkat.O

How to change validity period of cost centre or activity type

Hi
How to change validity period for an Activity type or Cost centre?
Can we change the validity period once created?
regards
Prakash

Please note this can be done.
Go to Edit Cost Center
Goto Edit, Analysis Period.
Create a new validity period say today until 3112999
Change the data you want and save.
When you go into the CC again it will show two validity periods.

How to do validation in RFC

hi all
how to do validation in file to RFC
regards
krish

Hi krish,
Yes you can validate with RFC,please see below links
http://help.sap.com/saphelp_nw04/helpdata/en/76/98384162316532e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/11/028417f9f8b24cbe1b0b398e1cb76a/frameset.htm
CO Validation using RFC - URGENT!!!
User RFC validation
RFC Sequence
Regards
Chilla..

How to skip all files other than .txt file in Mail Sender Attachemnt ?

Hi Friends ,
 I am reading an Mail attachement and sending to R3 using PaloadSwapBean and MessageTransformBean .
 I used to get attachement as .txt file , name like Ex10185.txt in one mail . In another mail Ex10186.txt like that.
 If only thoses file comes then no problem .
 IF some times along with .txt file some .html files are coming by that time my Mail Adapter incorretly reading the .html file.
 Please tell me how to skip those kind of attachements and read only .txt file
 Expecting your answers asap.
Best Regards.,
V.Rangarajan

Hi Michal,
 Thanks for your reply , Sorry! I am aware of how to write adapter module. Can you please tell me how to write adapter module ?
 Is there any links available or Blogs ?
 I am expecting your reply asap .
Best Regards.,
V.Rangarajan

How to skip line for delimited file type?

Hi, i wanna ask how to skip (example: the first two line) for delimited file type?
Thanks...
Here is my script
Function NY_Skip06Center [strField, strRecord]
' FDM DataPump Import Script:
'Created by: FDM_Admin
'Date created: 2/28/2006
Dim strEntity
'Check first two characters of entity
For strEntity = 1 to 6
'Skip line
Res.PblnSKip = True
Next strEntity
End if
End Function
But it returns this error when imported
Error: An error occurred importing the file.
Detail: Object variable or With block variable not set
Anyone knows what's wrong
Edited by: user649207 on Mar 19, 2010 2:15 AM
Edited by: user649207 on Mar 19, 2010 3:04 AM

strAcc = DW.Utilities.fParseString (strField, 1, 1, chr(9))
I didn't look closely enough last time. The above is illogical. The parsestring function parses a string based on a delimiter.
The function has these arguments:
String to Parse
How many fields are in the string
The parsed field to return
Field delimiter
In the above, strField is returning the field specified in your import format. You are also saying that there is a total of 1 field. If that were the case, you wouldn't need to parse anything.
I am guessing that your call needs to look something more like this:
strAcc = DW.Utilities.fParseString (*strRecord*, *8*, 1, chr(9))
Make sense?
If not, maybe you can include a few sample lines from your data file and that will make it easier to help you.
Is your import format fixed or delimited?

How to skip a worker process

hi,
may i know how to skip a worker process
thanks
srikanth

hi,
what is 11i data model? and how application modules
are dependent on data model?
thanks
srikanthSrikanth,
Please post same query only once:
11i data model
11i data model

How to skip a record in flat file to idoc scenario?

Hi,
Anybody have good suggestions on how to skip a record(xi not process the record) based on certain conditions? I don't want to use bpm, anybody has experience with file to idoc can advise how to deal with this situation?
Thanks,
Meg

Meg,
Its very clear. It can be easily done. I hope u might be knowing about Michal's changing the IDOC occurence blog. Based on that blog change the IDOC occurence to 0...Unbounded.
Now map all the necessary fields to the target IDOC. On the IDOC root node set condition from source if the source field is not Delete then create IDOC else don't create.
Source --- If without else[Check condition if the source is delete] -
IDOC(root node).
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change
Hope its clear, if not kindly revert back.
Best regards,
raj.

How to Skip validation

Similar Messages

Maybe you are looking for