How to solve environment change
Hi,I have one question that is if I changed my environment from develop environment to test environment and then to product environment, how can I maintain my source code?
Example: I have 5 services as BPEL parterlink, all of them in one mechine, one endpoint, but now I changed my BEPL to another machine, I will change BEPL source code to change the 5 sevices's address and then redeploy my BPEL program, yes? So I think it's hard to maintains in this circumstance.
Any idea to solve this?
I guess this will help you understand 10.1.3.4 deployment plan.
[http://oraclebpelindepth.blogspot.com/2009/01/bpel-10134-deployment-framework.html|http://oraclebpelindepth.blogspot.com/2009/01/bpel-10134-deployment-framework.html]
Basically the changes that come in during deployment are the hostname and port numbers based on the environment being deployed to.
If there are any shared XSD files, these too might come up for replacement based on how the XSD are deployed.
Deployment plan will do the trick for search and replace in configurations, partnerlink bindings, wsdl and schema files.
Every Little Helps
Kalidass Mookkaiah
[http://oraclebpelindepth.blogspot.com/|http://oraclebpelindepth.blogspot.com/]
Similar Messages
-
Hi, my Ipod Schuffle (4 gen) dissapears from windows vista right after I execute Itunes, I've change the drive letter, erase temps in App data file, verified USB drivers, etc... Can someone guide on how to solve this?
If you want the shuffle to be always visible in Windows (outside of iTunes), you need to Enable disk use.
Select the shuffle in the iTunes sidebar, under DEVICES. Over to the right, select the Summary tab. You should see a checkbox that says Enable disk use. Check it and click Apply.
NOTE: If disk use is enabled, you have to Eject the shuffle in iTunes, BEFORE you physically disconnect it. If disk use is NOT enabled, you can disconnect the shuffle at any time, as long as iTunes is not doing something with it at that moment (such as syncing); the shuffle's light will then be blinking (to indicate DO NOT DISCONNECT).
So, unless you want to use the shuffle like a USB flash drive (carry random files on it), you may want to NOT Enable disk use. -
Database file changed ora-01251 how to solve?
hai all,
database file changed ora-01251 how to solve?
suddenly changed when i try to connect Oracle Management server(OMS)
thanks
rcs
=======
os:winxp
db:Oracle9i Enterprise Edition Release 9.0.1.1.1 - Production
SQL> Recover database
ORA-00283: recovery session canceled due to errors
ORA-01110: data file 9: 'F:\ORACLE\ORADATA\BIMPEX\BIMPEX.ORA'
ORA-01122: database file 9 failed verification check
ORA-01110: data file 9: 'F:\ORACLE\ORADATA\BIMPEX\BIMPEX.ORA'
ORA-01251: Unknown File Header Version read for file number 9
WRONG FILE TYPE
F:\ORACLE\ORADATA\BIMPEX\BIMPEX.ORA
========Hi..
Would like to know if any changes were done before this error popped up..
From metalink :--
>
Error: ORA-1251
Text: Unknown File Header Version read for file number %s
Cause: Read of the file header returned a record but its version cannot be
identified. Either the header has been corrupted, or the file is not a
valid database file.
Action: Have the operating system make the correct file available to the
database, or recover the file.
>
If the file is corrupted, then take the datafile offline and open the database.If it was renamed, then you can check metalink Doc ID: 230449.1
if the database is in archive log mode, you can refer to metalink Doc ID: 333620.1
HTH
Anand -
how to solve illustrator cs6 save as cs5 problem about the stroke(when the stroke with clipping mask and color is gradient, save as cs5 will change to embed ).
Because it was not possible to apply a gradient to a stroke in CS5. When you open the file in CS5, it is reduced to something that can be rendered in CS5.
-
i want to change my apple id on my macbook pro in the user info. it ask for a password...i am typing in my password to the apple id but it will not accept it....how to solve it ?
I'm afraid that you may be confusing two different 'passwords' - there's your Apple ID (the user name and password that you used to get into these forums) and then there's your computer user name and password - usually two seperate user names and passwords.
If you want to change your password for your user account on your computer, go to System Preferences>Users & Groups and unlock the preference pane. Then you can select your user name and change your password there. Changing a user name is a bit complex and I don't think you want to try that!
Clinton -
I want to pay 4.99 for my game, however, it shows "your purchase could not be completes." I have no idea how to solve it. btw I just changed my location and payment option for my APPLE ID.
If you are getting a message to contact iTunes Support then to do so (these are user-to-user forums) :
- go to http://www.apple.com/support/itunes/ww
- click on your country's flag
- click on the Contact Support at the bottom of the left-hand column
- click on Contact iTunes Store Support on the right-hand side of the page
- then Purchases, Billing & Redemption -
An error occured when attempting to change modules .. how to solve this ? Thanks
Hi there,
I installed Lightroom 5, then it asked it for some directory to create some catalogue. I changed was was given default to me to some other directory. It was a mistake.
Then a message saying "An error occured when attempting to change modules" always popped out when I started Lightroom 5.
In fact I uninstalled and reinstall Lightroom 5 again. Ang it gave me the same message. I am not sure why when I reinstall it, it no longer asked me the directory I wanted to create the catalogue but instead gave me the error message straight away...
Any ideas on how to solve this is greatly appreciated as I desperately need to use this Lightroom 5 ...
Thanks99jon wrote:
Did you install from CC desktop or from an Adobe download link?
When you click on the install button under the Apps tab within the Creative Cloud desktop app, no serial number is required.
Hi 99Jon,
I installed from CC desktop and you are correct. You are correct, when I install the CC, there is no serial number required or given to me.
Let me explain again the sequence of my problem.
1) I installed the CC desktop after I chose to pay monthly.
2) The installation was perfectly fine, NO asking of serial number
3) I install the Lightroom 5.7.1 without problem and NO asking of serial number too.
4) I run Lightroom 5.7.1 for the first time and it asked me to select a folder for catalogue I didn't select the default directory that it suggested. And this caused problem because it then gives a message saying "An error occurred when attempting to change modules"
5) so I delete the whole Lightroom 5.7.1 and reinstall from CC Apps.
6) The problem still persists and I continue to have the "An error occurred when attempting to change modules" message
7) So I deleted the Lightroom 5.7.1 and reinstall. Problem still persist.
8) So, I did a software update as advised by the link you gave me (ie Solution 1). Interestingly, the update Version is 5.7.1 which I have.
9) After the update installation, I no longer receive "An error occured when attempting to change modules" the message but instead tnow I receive message asking me for serial number. So much problem now ...
Note:
If you see this link, something is wrong bcos when you clicked the settings wheel, you'll see that Managed Application - Uninstall Unavailable"
<a href="http://s32.photobucket.com/user/ryan_khoo/media/ScreenShotofAdobeCC_zpsa6c420e7.jpg.html" target="_blank"><img src="http://i32.photobucket.com/albums/d2/ryan_khoo/ScreenShotofAdobeCC_zpsa6c420e7.jpg" border="0" alt=" photo ScreenShotofAdobeCC_zpsa6c420e7.jpg"/></a>
So now my problem has changed form one where the error message popped up to one which now asked me for serial number ...
Any ideas ?
Thanks -
Anyone? Thanks ;) tell me
How to solve about the "apple ID has been disabled"?I am having the same issue. I just got my Iphone4 on Friday and no matter what I do to confirm my AppleID, it says its been disabled. Anyone have any ideas?
-
How to solve this Folio Builder error :
We have uploaded 18 magazine titles on DPS for the month of December and for some reason magazine with large file size cannot be accessed.
Can you provide information on how to solve this error:
" Folio Builder error: An error has occured while loading your documents from the server. Network failure."
thanks,Have a look at these docs:
E-CA Change Assistant gives error: All agents should be running and sending pulses for all application, batch, file and web servers for the environment before the Change Assistant is started (Doc ID 1073464.1)
E-CA: PT8.53, PT8.52, PT8.51, PT8.50: EMF Agents not Finding Configuration Files for App Server, Batch Server (Doc ID 1080590.1) -
The top picture is what my Desktop 1 looks like. And the picture below is what my desktop looks like after clicking mission control. Ive tried changing wallpapers, changing preferences, etc. and I still can't figure out what's wrong. As you can see, on mission control you can't see any of the open windows, or anything that I have placed on my desktop. Any ideas as to how to solve this issue?
Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time. -
How to solve delay in a program with data aquisition and processing
Hello, I am a starter in Labview programing. I am working on a system which contains a roller, a piston and a A/D cart which is from Data Translation Inc (DT304). I am using labview to get speed data of the roller (which is voltage first then be converted into speed) from Analog Input Channels, and then using Analog Output Channels to control the friction force being appylied to the roller by using a piston.
I am using a Waveform Chart to show the speed of roller. However, as I am adding more components to the program, I always get delay in the speed display and also the output control of the piston. Also, as I spent more time using the program eg. from morning to night, it became slower too.
My question is, how does labview store data and how are the data been stored and released in the buffer.Is it because I am loading too much data in the buffer so that it became slower? And also how to solve these delays?
I am using the "save to file" function to write data to a ".lvm" file, but I did some changes to the saving by using a button to enable and disable saving. So I don't think the problem is because I am always saving the data into a file.
Thank you very much.
JessieI'm betting it's two things:
1. Program Architecture
and 2. Dynamically resizing arrays.
With the program architecture... if you have one do-while loop that acquires data from teh DAQ, processes it, opens/indexes/writes/closes a file, then comes back around... as your arrays and files increase in size, the loop is going to take longer to execute. A Producer-Consumer loop (a good tutorial on them can be found here) has one loop that acquires data and stuffs the data into a queue. This will buffer the data while it's in transition between acquisition and processing. A second loop in parallel takes data in from the queue, processes it, then comes back around. The two loops operate independently of each other, so even if the consumer loop takes longer as the files or math gets more complex, the producer loop continues to run full speed.
Second is the arrays. Every time you append data into an array, LabVIEW has to make a copy of the data that's in the array. If you append small amounts of data to an array over and over and over again, eventually LabVIEW is going to be copying very large amounts of data over and over and over again. The producer-consumer architecture can alleviate this problem. -
How do I select/change the status of my post/reply?
Hello,
I'm fairly new to the forum and I'm finding it challenging to figure out how to use all the features in a straight forward manner.
For instance, I've noticed on my recent reply to one of my post questions that the status automatically showed up as "this solved my question". I did not select this status and I did not see any place to select the status of my reply. I went back to edit the reply status immediately and still saw no way to change it.
The fact is, that my reply was not in relation to solving my question at all. I replied to someone who offered a solution and I was replying as to the results of that solution, which did not solve my issues, it just created different issues. So now my post shows as solved when my question hasn't been answered and the issue is not solved.
The probabability that my question above has been asked ad infinitum is better than good, I suspect. But when I search the quesiton in the search communities box I don't get a clear answer. Please do excuse me then, if I am repeating an over asked question. I'm not even sure I'm searching the forum correctly or if there are other options to search in addtion the search box in the upper right hand corner....
Honestly, I've been on a lot of forums and am an active member of several, I'm a fairly advanced mac user, having been a mac guy for decades, and this forum doesn't appear to be very clear or easy to figure out how to use to me. It feels as if they're almost trying to discourage you from figuring some things out...weird. I've been searching for a clear answer for this for an hour now--trying different queries and different parts of the forum.
Any help with how to select and change post and reply staus would be much appreciated.These buttons that you show were not on the post I replied to in my thread.
You will see the buttons only, if you are the original poster of the thread, not if you asked a question in thread, that someone else started. Also, you will not see these buttons, if you already markes answers as solved or helpful. You can mark two answers as "Helpful" and one answer as "Solved". Afterwards the buttons will vanish, see "Answering to Questions".
Another question that comes up is, if I fail to select either button and simply reply to the post without selecting anything, what happens then?
Then the buttons will stay, until you mark an answer. You are not obliged to mark every answer. It is up to you, how you rate the answers you receive.
You may want to have a look at the tutorials on the main page of the ASC: https://discussions.apple.com/static/apple/tutorial/index.html
Regards
Léonie -
How to get the change mode option for the line items in SC
Hi Everybody,
1. when the SC has 2 line items and in that if both the line item are rejected by the approver and the requester is receiving it for accept changes and when he click on the change button and wants to change the line items of both the rejected one, the change is enable and the requester can do the changes in the line items of the shopping cart which is working fine. but in the other case
2. when the SC has 2 line items and in that if any one of the line item is rejected and other one is approved by the approver and the requester is receiving it for accept changes and when he click on the change button and wants to change the line item of the rejected one, the change is getting disabled but for the approved line item the requester can able to do the changes.
so can anyone help me out how to solve this issue that if any one line item is rejected in the shopping cart also it should get the editable mode when the requester wants to do any changes.
thanks in advance.Hi Everybody,
1. when the SC has 2 line items and in that if both the line item are rejected by the approver and the requester is receiving it for accept changes and when he click on the change button and wants to change the line items of both the rejected one, the change is enable and the requester can do the changes in the line items of the shopping cart which is working fine. but in the other case
2. when the SC has 2 line items and in that if any one of the line item is rejected and other one is approved by the approver and the requester is receiving it for accept changes and when he click on the change button and wants to change the line item of the rejected one, the change is getting disabled but for the approved line item the requester can able to do the changes.
so can anyone help me out how to solve this issue that if any one line item is rejected in the shopping cart also it should get the editable mode when the requester wants to do any changes.
thanks in advance. -
I have around 400,000 photos of 15 years so given the high number, I organized all my photos into 6 catalogs to avoid potential problems. All the photos and the catalogs are in a 4TB Seagate external hard drive. I use Adobe Lightroom 5 and I use a PC with the latest Windows Office 2013.
I wanted to have a NEW Catalog of all my rated 1 Star+ photos of all the years in a single Catalog. So I created what I called Star+ Catalog and I was told the best option is to import a Catalog at a time and given that there is no means to filter importing only Stared photos, I would import all the photos and then delete all the UnStared photos. I did that for Catalog Year 2014 but at the end gave me the message: "lightroom could not import this catalog because of an unknown error". It actually had imported around 40k photos from about 50k total. I tried again and again and every time I end up with the same thing. I created another new Catalog and stared from scratch and the same ting happened: the ONLY EXACT 40k or so photos were imported and the rest were not!! When I imported Catalog Year 2013 of around 45k photos, it worked perfectly. But when I imported Catalog Year 2012 of 35k photos, the same thing happened!!
Any advice: 1) on how to solve this? and 2) if there is a better and easier way to create this Master Catalog of All Stared Photos of All my Catalogs?OK, my starting point is that LR can happily contain 400000+ photos, and it's a mistake to create a 1 star plus catalogue as you suggest. Instead, I'd recommend you create a master catalogue of all your photos, which you can then query however you want - 2 star, or a certain keyword, or with "xyz" in the title etc.
If you are intent on going that way, you could try a slight change from what you've done so far. Instead of trying to import an entire catalogue and then delete no-star pictures, take the 2014 and 2012 catalogues and select only the 1 star photos. Then do an Export as Catalog for these items, and import the 2014-1star and 2012-1star into your new catalogue. That may get you past the problem images which I suspect are the problem.
If that doesn't work, or if you follow my initial advice, you're going to need to identify the image where the failure occurs. You may have a corrupt image file, and replacing it from your backup may be sufficient to resolve the problem. Alternatively, it may be a corrupt record in the catalogue, and in this case it may be sufficient to remove the image from the catalogue and import it again. You might try selecting everything in the 2014 catalogue and seeing if you can do an Export as Catalog, creating a clean 2014, and deleting 2014's previews folder might also get rid of a potential problem. Something else is to try the Export as Catalog for images 1-40000, then a second Export as Catalog for images 40002-50k.
So a few things you'll need to try, rather than a magic bullet, and a recommendation to change the underlying direction.
John -
I have a problem in my iphone 4 with wi-fi after update to IOS6 please can help my how can solve this problem?
Nope
One needs to press the home and sleep / wake keys together for the phone to reset
The other thing I could recommend
Let the battery run out and the phone completely "die"
It may take a day or two with it not being used
Then plug it in to charge and see if there is any change in behavior
If you cannot get this to work - you may need to bring it to an Apple store
Maybe you are looking for
-
How do you calculate the length of a microcassette tape on the M-2000 transcriber?
There is a counter that runs as you rewind a microcassette tape. What is the equivalent in minutes? I would like to know how long the tapes are that I am preparing to type. Thanks for your prompt reply.
-
For maintaining exchange rates, I configured the 1. one. How do we maintain exchange rates. Do we need to get the exchange rates or client maintains it. Where do we get the exchange rates from. Does the exchange rate is given by the client. 1. Define
-
Country Name exists or not in Jquery!!
Hi All, I want to validate country filed in Jquery, when the users clicks the filed if that country does not exists in database then the validation should throw error. Below is the script i had wriiten when the submit button is pressed. Now how to ha
-
No content on ipod computer not recognizing ipod
no music on ipod computer doesn't recognize ipod
-
Error processing a page. Problem reading document (110)
This occurring following error message when opening a PDF file: "Error processing a page. Problem reading document (110)" Does anyone have any suggestions?