Slingbox: setup problem "your Slingbox has been disconnected due to poor internet connection"
Does anyone have experience in setting up a Slingbox with their Verizon router? If so, have you encountered this error ("your Slingbox has been disconnected due to poor internet connection")? How did you fix it?
Thanks!!
#1 Are you on
a) DSL
b) FIOS?
#2 At least what the brand and model of your router is.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.
Similar Messages
-
I need help. I have tried it with the cord that came with my 6, as well as my iPad mini cord, and no matter what cord i use, it still shows "your phone has been disconnected", and no one is disconnecting the cord.
http://support.apple.com/kb/HT4137
How to restore as new.
and this for itunes message
http://support.apple.com/kb/HT1808 -
how do I make safari work again? I was trying to open an article on mashablaw when this happened. Please help
First and most important, do not call the number, do not let them have access to your Mac, and DO NOT pay them anything.
All such warnings like this are scams. You are not infected with anything, and nothing has been installed or downloaded to your Mac.
Force quit Safari. Hold the shift key down and relaunch it. If that alone doesn't do it, temporarily disconnect from the Internet and repeat. If the page appears, you will be able to move away from it or close it's tab since the scam pop-up can't contact the remote server to keep you stuck. Reconnect to the Internet after clearing the page. -
Firefox has been causing drops in my internet connection lately. PLEASE, PLEASE, PLEASE HELP!
OK, I recently wrote to the author of Session Manager about this problem, since I thought I'd narrowed it down to that, but, well, maybe not. I'll copy & paste that conversation here, rather than waste a lot of time writing up something from scratch, especially since I've already wasted an INCREDIBLE amount of time on this problem, and I'm about ready to go berserk...
Hello. I've been using Session Manager for a long time, but lately, it's been causing a problem that's been driving me out of my skull, and I think I've finally pinned it down to SM. lately, when I've tried to load sessions, even with a small number of tabs, it's caused my internet connection to drop, or, at least, to slow down to the point where pages try to load, but finally come back with a message that the connection timed out, or the page had took too long to respond. I have my Windows Vista Home Premium computer running Firefox 11 connected via Ethernet to a wifi router that is connected to a cable modem. I tried disabling pre-fetching, resetting my router to factory settings, I tried a different router, I tried removing the router and connecting directly to the cable modem, i tried a different modem, I tried disabling the Symantec extension, I tried clearing windows' DNS cache, I tried disabling Firefox's DNS cache, I tried disabling Symantec's Firefox extension (I have Norton anti-virus), and I tried disabling my anti-virus & firewall programs (hmmm, did I leave anything out?), but none of that solved the problem. I haven't noticed this behavior with any other program, and Firefox goes along swimmingly otherwise. The reason why I think I've finally pinpointed it as SM is that trying to load a certain 9-tab session caused this problem multiple times, but I eventually got it all loaded correctly, and then I tried restarting it, and Firefox's own built-in feature of loading the tabs and windows if it closed properly the last time worked just fine, and it loaded quite quickly.
So, why might this be happening, and what can I do about it? Do you think it might be a matter of the SM data being corrupted/ If so, how do I get rid of it? I found the Session Manager Export Tool extension and exported my sessions and then tried uninstalling and re-installing SM, but it hadn't gotten rid of the old SM data. Please help, as I consider SM to be a vital part of my Firefox and have come to rely on it, plus I'd like to be able to use my old saved sessions again. Please help ASAP, too, as I've already wasted an unbelievable amount of time on this and I am extremely frustrated and aggravated. Thank you.
The response I received:
"Session Managwr cannot cause your Internet connection to drop, it simply doesn't have the ability to do that. All it can do is cause Firefox to restore tabs that have been saved. It can cause lots of web pages to load, which could slow down Firefox or possibly your Internet connection (if you have a really slow connection), but it can't drop your Internet connection. The only exception to that that I can think of is if your modem has a web page with a reboot button and you press that, then save the session such that restoring the session causes the reboot button to press, but that is extremely unlikely.
By default Firefox loads tabs one at a time anyway so it's unlikely to slow things down when loading sessions. If Firefox can restore sessions properly, the Session Manager should be able to do so as well, since Session Manager uses Firefox's restore capabilities.
I'd recommend disabling plugins in Firefox and/or other addons and see if that helps. If you can figure out what changed recently that would help narrow things down.
As for Session Manager data. It doesn't store anything other than the sessions. You can delete those if you wish."
My reply:
Well, I have a cable internet connection, so I don't think speed is the problem there.
Are you sure about Firefox loading only one tab at a time? I know when I load a session, it seems to show several tabs loading at the same time, and I can't remember it ever not being that way.
Frankly, though, I need more specific, targeted help than being told to just start randomly disabling extensions. I've ALREADY wasted an INCREDIBLE amount of time on this and am ALREADY EXTREMELY frustrated and aggravated, and to just go blindly shooting around in the dark at random is only going to throw craploads more wasted time and aggravation onto the already huge pile. I'm at my wit's end here. I can't take much more of this. I need REAL help. I need more specific, targeted advice about what sorts of things I should be looking for, what sorts of things I should be trying, etc. I don't have any patience left to just start flailing around randomly and likely getting nowhere fast.Hi,
You can try to verify that '''Don't load tabs until selected''' is enabled in '''Tools''' ('''Alt''' + '''T''') > '''Options''' > '''General'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20General%20panel?as=u Options > General]
[https://support.mozilla.org/en-US/kb/Options%20window Options]
If the problem persists please also check in a [https://support.mozilla.org/en-US/kb/Managing-profiles new profile]. If the new profile is okay, you can later [https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile?s=profile&r=1&e=sph&as=s copy the needed personal data] from the old profile and start using the new profile. You can then delete or troubleshoot the old profile. Firefox stores your personal data and settings in [http://kb.mozillazine.org/Profile_folder another location (profile folder)] separate from its [http://kb.mozillazine.org/Installation_directory folders/files]. A new profile would have the default Firefox settings in '''Tools''' ('''Alt''' + '''T''') > [https://support.mozilla.org/en-US/kb/Options%20window Options] and [http://kb.mozillazine.org/About:config about:config], and usually would also be empty of '''Extensions''' and themes ('''Appearance''') in '''Tools''' > '''Add-ons''', and their settings. Also, a new profile would have no previous stored website cache/cookies/data/preferences: '''Tools''' > [https://support.mozilla.org/en-US/kb/Clear%20Recent%20History '''Clear Recent History'''].
[https://support.mozilla.org/en-US/kb/Profiles?s=profile&r=2&e=sph&as=s Profiles Howto]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder & Files]
[http://kb.mozillazine.org/About:config_entries about:config Entries] -
The maximum report processing jobs limit configured by your system has been reached.
Hi,
We are using Crystal report in ASP.NET (Microsoft .NET 3.5) environment for a number of years but everything went quite well.
But recently, we have migrated to .NET 4.5 ,and started having this error.
"The maximum report processing jobs limit configured by your system has been reached."
As per internet search, some recommended to use the Object.dispose() approach. We have applied recently ,and it is still NOT working
Our JobLimit in the registry on production server is 75.
This is report display
This is report dispose
Seeks your technical expertise here thanks in advance.See if this Article will help:
Crystal Reports Maximum Report Processing Jobs Limit
BTW.; do not set the JobLimit key in the registry to -1 (that is for CRS OEM edition only).
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
I don't know what I changed yesterday on Firefox so that it saves the "cookies" from certain sites, but I must have changed something that I didn't meant to.
Now when I am in Outlook and I want to click on any of the links I get an error -
THIS OPERATION HAS BEEN CANCELED DUE TO RESTRICTIONS IN EFFECT ON THIS COMPUTER.
Help....Does this help?
*http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q310049
*http://www.slipstick.com/problems/this-operation-has-been-cancelled-due-to-restrictions -
Can anyone from APPLE help us? Just recently the ipad 2 has been disconnecting itself. WE have had NO issues for 1 year. All other Apple products in the house are running fine from same router/wifi. Did Apple suddenly do something to ipad that is causing this disruption??
You may think you are connected to the internet, but maybe not. Click on Safari and see if it connects.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
My Ipod has been disconnected from the internet. All efforts to date have failed,including resetting my network settings and trying to log in again.
Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Here is our environment: Windows Server 2008 x86 SP2 Terminal Server running Citrix XenApp5.0 with Office 2007 installed. We have a Group Policy to restrict users from access the server's C:\ drive. When our users open or save a Microsoft
Word, Excel, etc. document they are presented with the following error. "This operation has been cancelled due to restrictions in effect on this computer. Please contact your systems administrator." When our users click on the OK button it
allows them to open or save the document. If I remove the restriction to C:\ from our Group Policy, then everything is working fine. Please tell me how to fix this problem. Thanks.Hi Jeffery,
Unfortunately, I could not work around this and MS said it was by design. I even tried some clever stuff with symbolic link s but to no avail. I simply ended up informing my users to ignore the message and continue. i don't want anyone to be able to browse
the C: drive so I'm leaving the NoViewOnDrives registry key in place. However, there is one possible workaround but for me , it didn't suit:
Change the temp location of the folder Outlook uses for attachments
http://support.microsoft.com/kb/817878
Also, I'd recommend forcing all attachments to open in read-only mode http://support.microsoft.com/kb/953621
Annoying but you can't have everything i guess :( -
Hi, I am unable to sign in to my iCloud account. When i sign in, it says Your apple ID has been disabled due to security reasons. Kindly reset your password to log in. I have already reset my password thrice but am unable to access into my account even after using the reset new passwords. Can someone help me. This unfortunately is my primary email account and Im unable to access any of my emails
This Apple Help page provides contact information for various countries for security problems with an Apple ID:
http://support.apple.com/en-us/HT5699 -
Sorry but i have a problem my IPAD has been stolen and i want help to know where is the place of it ? can i send the serial number or anything i want help to know the place of my IPAD and thanks My name is :- Osama Rezk I'm From :- Egypt my icloud ID
<Email Edited by Host>You will only be able to track your iPad if you have find my iPhone active and the iPad is connected to a network.
Take a look at this link, http://support.apple.com/kb/PH2580 -
I cannot backup my iPhone 4 to iTunes because it says the device has been disconnected during "Step 5" (syncing purchases) but my phone is still connected. iTunes is up to date, I don't want to install iOS 6.0.1 until I backup my phone (when I installed iOS 6, I lost everything and had to restore to previous backup. Would hate to not have a more current backup and lose everything again). I have tried uninstalling and reinstalling iTunes and still the same problem. Please help!
You have to delete the corrupt back-up so iTunes can at least back-up the current data on the iPhone and then restore it. Search these forums, there a several good posts on how to delete the corrupt back-up.
-
Your appleid has been disabled
It's been over couple of months,I been trying to access and update my macbook pro applications,whenever i am trying to login the message pops up and says your appleid has been disabled contact support. It all started when someone used my account and downloaded content without my knowledge,through my e-mail i came to know about the transaction. Instantly i send the mail regarding this transaction and apple support disabled my id. After that i was been told to change my password,i did the same and my id was re-enabled,Thanks to apple support. But that time i was not able to use the same card for transaction,i was been told to change the payment options,as i cant change my card cuz i have only one bank account and only one debit card that too with ICICI bank,India. Now,out of nowhere i received the message your appleid has been disabled and again i cant update my macbook pro apps. So,there are 2 issues
1. Cant login using my apple id
2. Cant use the same card for the transaction in the appstore.I recently helped someone with a similar issue. Someone had stolen their credit card information and used it with a completely unrelated iTunes account. Apple went on to disable every account that this family used because they had that same credit card associated with it. So, if your about to charge back iTunes charges on your credit card because you didn't do it, change your payment method first. I was able to call 1-800-APL-CARE to get it fixed. Whenever they tried to do something else to correct it like resetting my password, I'd tell them "my brother just recently had this problem and said you guys chatted with the iTunes team to fix it." Once the agent did that, the accounts were working again, good luck to everybody that has to call Apple to get this resolved.
-
Lost iphone 6 : text stating "Your iPhone has been located."
So I lost my phone 6+ a couple days ago, and immediately turned on find my iPhone and put it in lost mode with my roommates contact number. I received a few notifications via email that a location had been identified. There were 2 different locations that were inconspicuous (park and gas station). The following day, my roommate (contact number for the lost phone) received this text: "Apple Inc. Your iPhone has been located. See location."
I understand why I received the locations when the phone came online, but I am confused on why she received this text message. Does that mean it was reported to apple? The message seems legitimate, and the URL is correct. The number it came from has not responded, although it is an active working line. Any ideas or suggestions?
Thank you!I agree, buttons do wear out, but not as fast. I got my iPhone in September 2012. The Home button would have problems sooner than the power button, that I barely use. To bring the phone ON to enter the lock code I use the Home button. I saw another guy claiming the same thing about his phone. To me it seems like a software problem and probably more and more people will complain about this from now on. But If I wait a little between I press the button again and again, it'll work better - that is why I think it's a software problem (and because my iPhone is only several months old and this started to happen suddenly after the update, one of which was supposed to patch the home screen hack). Anyway, you're right, it's under the warranty and I can replace it, but I'll wait a little, maybe for the next iOS update.
-
Congratulations your iPhone has been unlocked!
I decided to update my AT&T iPhone 4S 32GB last night to iOS 6.1.1. I was going to do a normal update and restore process, backed up my phone, ran the update and half way through it glitched and I had to do a factory restore. I figured I could do a manual restore from the backup I had just done so I wasn't too worried about it.
When the update / restore finished I got a screen that I haven't seen before, it Said, Congratulations your iPhone has been unlocked! To set up and sync this iPhone, click continue. The lock screen on my phone was in fact the factory fresh unlock screen so I set it up and then did a restore from the backup I had just done. Everything was restored except for my music, what a pain that is.
My question is, did my phone actually get unlocked? And is there a way to tell other than putting in another carrier's sim card? I bought the phone on contract and I still have about 6 months to go before the contract expires.Hello,
First of all, nice to meet you here. Im sorry im just new, so must be iTunes or updating software glitches so this is all impossible. All carriers would not let phone to be unlocked when they are approaching end contract date. So try to contact AT&T and just ask them and describe what problem you have like you mention above and not hurt to ask them. Try that!
Maybe you are looking for
-
Getting error while running Agent in obiee 11g
Hi, We are using external table authentication in our application. We created 10 user in the table, when we are logging to the application we are able to log in. After log in when we are creating Agent and click on run, it is showing error as [nQSErr
-
Costing COPA and cost element category '1' for Revenue and COGS
Hi, In my SAP environment historically Revenue GL accounts were created as cost element with category '1' (costs) and are being posted against cost centres. I know it is not SAP best practice, but it has been working like that in here for years. We h
-
I have a custom renderer for a combobox to allow me to bold and change color of the text. However, this has overridden the function that highlights the list items as you hover over them. I have been able to recreate the functionality, but would like
-
Truss: cannot trace set-id or unradable object file: file
Good afternoon, As a tool from my company is running very slowly, I wanted to know where something is going wrong. In order to determine this, I have decided to "truss" the tool: Prompt>truss <tool>Unfortunately I get error message: truss: cannot tra
-
Hi, a question for you, experts. The system saves logs of all operations that the users execute on SAP? And where I can find this logs? Thanks, regards.