How to specifiy  locator for pending product lots ?

Hello
i'm using this API : gme_api_pub.create_pending_product_lot
it works perfectly , but , how can i pass a specific locator ? ( other than the batch material locator ) to that created pending line ?

Hi
No this is not possible, since Parent lot is a subset of Lot in R12. Once you choose your item as LOT, then it is not possible to make as Optional.
Try to raise an SR for this, Oracle may provide some workaround for the same.
Rgds
Raj
NTTData India

Similar Messages

  • How to set the 'Lot' field in Batch Pending (Product) Lots as 'Optional'

    We are now Upgrading FROM 11.5.10.2 To r12.1.3.
    The 'Lot' field under Batch material Details -> Pending Product Lots is mandatory, Which is very bad for us.
    Our Current (11i) business process for creating Product lots, is to 1st allocate the 'Lot', and later on allocate and complete the 'Sublots' within this lot.
    The equivalent process in r12 should be: 1st allocate the 'Parent Lot', and later on allocate and complete the 'lots' within this Parent lot.
    Question: Is there any way to set the 'Lot' field to be optional?
    Thanks,
    Eran.

    Hi
    No this is not possible, since Parent lot is a subset of Lot in R12. Once you choose your item as LOT, then it is not possible to make as Optional.
    Try to raise an SR for this, Oracle may provide some workaround for the same.
    Rgds
    Raj
    NTTData India

  • How to fix "Licensing for this product has stopped working - Error 150:30"?

    I cannot pen PSE or Bridge. It get the message "Licensing for this product has stopped working - Error 150:30".
    I assume it is because I recently upgraded my Mac to Yosemite.
    What do I need to do to be able to open PSE again?
    Thank you.

    Thank you. I appreciate your tips. I tried solution 5 and it doesn't work.
    The rest is essentially gibberish to a basic user like myself. I have
    neither the expertise nor the confidence to go into these folders and start
    mucking around in there. Can I please have someone call me and guide
    through the necessary steps. My number is 06 46 40 94 39 (Location: France).
    Cheers.
    Michel Payen-Dumont & Nancy Feyerer
    www.gaulejac.blogspot.com
    Tél.: 05 53 50 72 80
    M: 06 46 40 94 39
    N: 06 45 29 59 40

  • How to generate reports for specific products sold in e-commerce

    Hello,
    I am going to start letting products from other manufactures be sold in my online store and do a percentage split of the profit with the manufacture. I was wondering how to tag those specific products and generate a report on how many products were sold and what the gross income was from those products. This will make the quartly accounting so much easier....
    Thank you for any help...

    Supplier - Choose a supplier that you source this product from. Setting this value is useful for when you report on your sales to see which supplier products are most popular.
    Commission Payable % - The commission percentage number is stored for each product in an order. If you have to pay commissions to suppliers for selling their products then setting this number allows you to run reports that calculate the final amounts for you.
    Yea I found this stuff eairlier but the question is how do you actually run the report and how do you set up a supplier? I don't see why this is so hard it should be in the custom reports section of the reports tab. Then make new eComerce report, then pick supplier then filter for sales by supplier. But there is no filter for sales... just a filter for status and country. And I would think that you would add a supplier to the affilate program but that is actually for something else entirely. Sorry this is probably very simple and I am over complicating it...
    Thanks for your help...  

  • How do I locate the 25character product key to use ms office homestudent 2007

    how do i locate or get the 25 character product key to be able to utilize word ms office home and student 2007

    Sorry, that issue isn't related to Firefox support. See if you can get help from this forum. http://lounge.windowssecrets.com/index.php

  • How to retry provisioning for pending values ?

    Hi,
    Our environment is IDM 7.2 SP7.
    And we have couple of users whose master privilege (PRIV:ADLDS:ONLY) is in pending state for quite a long time.
    I could filter those entries using mcExecState=512 in idmv_link_ext. It looks to me the reason for pending state is it's referring to some of the old notification tasks previously we had. Now those tasks are replaced by new one but i could see the old notification task is still under MX:Pending_Delete folder.
    I tried using some of the internal functions (uRetry_Privilege/uIs_PrivReconcile) but that doesn't seems to fix the problem. So is there anyother way available to clean up those  mcExecState=512 entries or retry provsioning with new tasks linked ?
    Thanks,
    Karthik

    Thanks for reverting back immediately.
    I executed the shared query and following are my observation
    select * from mxp_provision where msg like 'Wait for%'
    Output : No Result
    So there are no tasks with msg 'Wait for%' exist in our environment.
    1. Select * from mxp_provision where AuditRef=381162 (Considering 1 affected user flow)
    Output: Returned 3 rows (as the old provisioning task had 2 ordered task group and a Conditional task)
    Here It looks to me the provisioning flow is stuck at Conditional Task and MSG value is 'FALSE' so i tried to modify false branch in the condition and tried to make it 'skip entry' for completion but that doesn't seem to get triggered.
    2. Select * From Mxp_Audit Where AuditID=381162
    Output: 1 Row with ProvStatus as 1 (does ProvStatus=1 implies blocking here ?)
    Do you think executing below query will remove the blocking state and can get completed ?
    update mxp_audit set provstatus=1100 where auditid = 381162

  • How to enter quanities for a product in a campaign

    Hi
    I have created a Campaign in CRM 7.0
    The Campaign should trigger a number of Opportunities for all the BPs in the Target Group. I have assigned Campaign Type, Communication Medium, Profile Set and Target Group. when i entered product, i couldnt see any field to enter the Quantity for the product. Without entering the quantity i am unable to start the campaign.
    Please suggest me to add quanity for the product. Also advice me other check points, if any, to start the campaign without errors.
    Thx.

    Problem solved.

  • How to create index for articles&products in ATG+Endeca application?

    Hi.
    I'm novice in Endeca.
    How to create ATG+Endeca application in which exists search by articles (created in Experience Manager) and by products (from BCC ATG).
    And how to index together products and articles?
    Where can I read about it?
    Thanks.

    Are you planning to create articles in ExpManager OR the content will come from some other system and you just want to manage the pages to display the content in Exp Manager?
    On a high level:
    If it is case #1 you have to integrate ATG & Endeca and write some cartridges for managing the content.
    If it is case #2 you have to integrate ATG & Endeca and modify the auto generated pipeline to pull in your content from the other system.
    Pankaj.

  • Tlanes not being created for all locations for one product

    Hello Experts - I need some advice on the following situation:
    We have a set of products where tlanes are only being created for 3 locations out of many.  What would cause the tlanes to not be generated for all locations if all master data elements are present?  We have a valid inforec, mrp views, etc.  I can't see anything different with the 3 locations that are working correctly.
    Any help would be much appreciated.
    Thanks!

    Thank you for your resopnse:
    To answer your questions, yes, we have done all of these things and the tlanes are still not being created.  We have been using SPP for 6 months and this is the first time we've seen this problem.  Do you have any other suggestions or is there any more information I can provide you that would be helpful in solving.
    Thanks in advance for your advice.
    AAF1999

  • How to detect defect for ampoule product?

    Hi,
    I am out of idea..anybody can give idea how to differentiate which one is the shadow and defect for image attached in this problem? One image is the perfect..one image caused of excess plastic defect as painted...and the other one is water spot occured at the surface of the ampoules...and particle defect and scracth at the surface..I already try sobel, threshold and filter...but cannot get result...and also using edge still failed due to it also detect the shadow...intensity also i have done but same issue due to of the shadow...
    Attachments:
    ampoule image.zip ‏2713 KB

    Lots of clarrification needed. The perfect one also have some water defects and a hole/crack. Why is the illumination not constant? Can you try increasing the posistional accuracy. This though not highlighted enough will help you a lot is attaining repeatablity.

  • How to know owner for apple product

    how to find really owner for stolen
    apple product .

    Report your find to local law enforcement. If they have received a reported loss from the previous owner they may be able to contact them.
    Best of luck.

  • How to change location for config files in WLS6.0 (like weblogic.home and weblogic.system.home in 5.1)

    Hi,
    I would like to point weblogic to a directory NOT under c:\bea\... for it's configuration.
    I used to do this on WLS 5.1 by setting:
    weblogic.home=/weblogic and weblogic.system.home=/projects/wlsconfig
    This way my config was NOT coupled to the weblogic install.
    I want to do the same thing, and have the config directory located in /projects/domainconfig
    for example.
    weblogic.system.home etc doesn't seem to do anything. The
    only variable that does anything is bea.home, but I need weblogic to find it's
    libs etc in /bea, but ONLY the config should be elsewhere.
    Any help would be great.
    Thanks,
    Dion

    From SP1 and beyond, you can use
    -Dweblogic.RootDirectory=<dirname>
    * The property for specifying configuration location:
    * The directory name of the domain from which to load the specified
    * configuration. The default is ".".
    * -Dweblogic.RootDirectory=<dirname>
    * The directory must exist.
    Dion Almaer wrote:
    Hi,
    I would like to point weblogic to a directory NOT under c:\bea\... for it's configuration.
    I used to do this on WLS 5.1 by setting:
    weblogic.home=/weblogic and weblogic.system.home=/projects/wlsconfig
    This way my config was NOT coupled to the weblogic install.
    I want to do the same thing, and have the config directory located in /projects/domainconfig
    for example.
    weblogic.system.home etc doesn't seem to do anything. The
    only variable that does anything is bea.home, but I need weblogic to find it's
    libs etc in /bea, but ONLY the config should be elsewhere.
    Any help would be great.
    Thanks,
    Dion[att1.html]

  • How to fetch data for CRM Product Master

    Hi,
    I'm trying to write a report on the product master in CRM.
    In our current setup, we have few Ztables attached to the Product Master tabs.
    The key field linking the Ztables is
    field name:FRG_GUID     
    component type COMT_FRG_GUID
    description:SET GUID     
    I would like to know if there is any function module which reads the product master table based on Product_ID  just like 'for example 'CRM_ORDER_READ'.( which gives all the GUID's based on Business Transaction Numbers)
    I need this because I'm not able to match the Fragment_guid of many DB tables to each other.
    Please help.
    Regards
    Rasheed

    Hi Pratik,
    Thank you for trying to help me. I shall explain my scenario for better undestanding.
    I'm creating a Product Master Report which is linked to several Z tables.I need to fetch the details based on the price group .
    The structure of one of the Z tables is as below:
    Field Name               Component Type
    .INCLUDE                     COMT_FRG_KEY
    CLIENT                     MANDT
    FRG_GUID     COMT_FRG_GUID
    .INCLUDE                     COMT_PRODUCT_ADM
    VALID_FROM     COMT_VALID_FROM
    VALID_TO                     COMT_VALID_TO
    UPNAME                     COMT_UPNAME
    HISTEX                     COMT_HISTEX
    LOGSYS                     COMT_LOGSYS
    ZZ0010                     ZMODELTYPE
    ZZ0011                     ZMODELDESC
    ZZ0012                     ZMODSALEABLEAREA
    ZZ0013                     ZMEAUNIT
    ZZ0014                     ZBUILTUPAREA
    ZZ0015                     ZCARPETAREA
    ZZ0016                     ZTERRACEAREA
    ZZ0017                     ZGARDENAREA
    ZZ0018                     ZBALCONYAREA
    now the only way I can get the information from this table is if I get the FRG_GUID.
    Is there any way where I can get all the FRG_GUID for the PRODUCT_GUID'S.
    Regards
    Rasheed

  • How to Subtract  Date for Pending Order Aging.

    Hi Gurus,
    This Report is for Purchase Requistion .
    In my report
      I want to subtract sy-datum with  ekko-bedat.
    for calculating Pending Order Aging .
    can anyone help me with this ?
    Regards,
    Vinoth.

    Hi,
    Try like this:
    TABLES: EKKO.
    DATA: EDAYS   LIKE VTBBEWE-ATAGE,
          EMONTHS LIKE VTBBEWE-ATAGE,
          EYEARS  LIKE VTBBEWE-ATAGE.
    PARAMETERS: FROMDATE LIKE ekko-bedat,
                TODATE   LIKE VTBBEWE-DBERBIS DEFAULT SY-DATUM.
    call function 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
      exporting
        i_date_from          = FROMDATE
        i_date_to            = TODATE
      I_FLG_SEPARATE       = ' '
      IMPORTING
        E_DAYS               = EDAYS
        E_MONTHS             = EMONTHS
        E_YEARS              = EYEARS.
    WRITE:/ 'Difference in Days   ', EDAYS.
    WRITE:/ 'Difference in Months ', EMONTHS.
    WRITE:/ 'Difference in Years  ', EYEARS.
    INITIALIZATION.
    FROMDATE = SY-DATUM - 60.
    Regards,
    Bhaskar

  • How to hidden character for configurable product?

    Dear experts,
        I have implemented the product variant in CRM IPC, the knowledge base is generated in ERP and transferred  to CRM.
        Now i have a special request to hidden some characters when they are displayed in IPC,  I checked the XCM setting for IPC, but i can't find customizing points.
       Any suggestion is useful for me , Thanks.
    Cheney Cai.

    Dear Easwer Ram,
       Thanks for you reply!
        I want to hidden characters in CRM, it's displayed in IPC.
       So is it possible to delete the characters i don't want  when i generate the KB ? So In the CRM order i can only see the characters i want .
    Regards.

Maybe you are looking for

  • Report Total but no Sub total.

    Hi, I have a report ( PL/SQL Function returning SQL Query). The query is complicated. If value of item :p1 is not null then it returns select col_a , col_b ... from table_a but if value of item :p1 is null then it returns select col_a , sum( col_b) ,

  • Shared Var in Cross-Tab Design

    Post Author: bkormoski CA Forum: General I have a cross-tab design that requires me to used shared var from a subreport.  The SV formulas are not in my available fields in cross-tab wizard.  What other choices are there? I am creating a summary finan

  • ISE version 1.0 - Unable to get management access for cisco devices

    Hi All, I want to manage all cisco devices with read and write privilege with ISE 1.0. Is this functionality is available in this version? I configured the 2960 switch.  On switch  redius test is successful. When I telnet to the switch, it ask for us

  • Do I understand WDS correctly?

    Hi all.. Ok, i've been trying to get WDS working with my WLSE. I'm not sure if I understand correctly.. our laptop clients currently authenticate via another system but I have a WLSE which I want to use to manage the radio network, signal strength/st

  • Query on billing document

    After creating the bill document with transaction code VF01,the document have been saved with error, no accounting document generated . Please give me the solution