How to specify ^M row delimeter in control file?

Hi Experts,
The row delimiter is ^M in my .csv file and not newline . Plz let me know how to mention that in ctl file of sqlloader.
regards,
Prashant

Hi All ,
plz let me the syntax for this .. I need to fix this ASAP..
Thx much

Similar Messages

How to delete the row in table control with respect to one field in module pool programming?

Hi,
Can I know the way to delete the row in table control with respect to one field in module pool programming
Regards
Darshan MS

HI,
I want to delete the row after the display of table control. I have created push button as delete row. If I click on this push button, the selected row should get deleted.
I have written this code,
module USER_COMMAND_9000 input.
DATA OK_CODE TYPE SY-UCOMM.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
     WHEN 'DELETE'.
        LOOP AT lt_source INTO ls_source WHERE mark = 'X'.
            APPEND LS_SOURCE TO LT_RESTORE.
            DELETE TABLE LT_SOURCE FROM LS_SOURCE.
            SOURCE-LINES = SOURCE-LINES - 1.
        ENDLOOP.
But I'm unable to delete the selected rows, It is getting deleted the last rows eventhough I select the other row.
So I thought of doing with respect to the field.

How to select perticular row in table control for BDC

Hi all
I want to select perticular row in table control for deletion through BDC. My transaction is CA02, My input is material no and plant , then it display table control with work center. Now i want to select W999 cost center and delete through BDC.
Please Suggest me. it urgent.
Thanks& Regards,
RP

Hi all
I want to select perticular row in table control for deletion through BDC. My transaction is CA02, My input is material no and plant , then it display table control with work center. Now i want to select W999 cost center and delete through BDC.
Please Suggest me. it urgent.
Thanks& Regards,
RP

How to use multiple table in single control file?

Hi,
How to use multiple table and data file in sigle control file? I have a four table and four csv file i mean data file for that. I am running concurrent program to load the data from csv file to custom table. based on my input data file name, it has to take automatically from one control file.
Can anyone share with me how can i acheive this?
Thanks

Hi,
Can't we acehive like below. I don't this exactly corrcect.
OPTIONS (SKIP=1)
LOAD DATA
INFILE << file name 1 >>
APPEND INTO TABLE XXCZ_VA_SAMPLE1
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
PARENT_ITEM "TRIM(BOTH FROM :PARENT_ITEM)"
LOAD DATA
INFILE << file name 2 >>
APPEND INTO TABLE XXCZ_VA_SAMPLE2
FIELDS TERMINATED BY "," OPTIONALLY ENCLOSED BY '"' TRAILING NULLCOLS
ITEM_NUMBER "TRIM(BOTH FROM :ITEM_NUMBER)"
)Edited by: orasuriya on Sep 14, 2009 3:03 AM

How to call translation template from bursting control file.

Hi All,
Greetings!!!!!!!!!!!!!
Need help on calling translation template from the bursting control file.
While calling the translation template from bursting control file it ends in error. Following is the error
[063010_063059160][][EXCEPTION] The URL ( xdo://XXX.XXXPOXPRPOL.fr.CA/?getSource=true ) is invalid.
But same control file is working for standard tempalte.
Here is the sample control file.
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
<xapi:request select="/XXXPRPOLXML/LIST_G_MANUAL_PO_NUM_TYPE/G_MANUAL_PO_NUM_TYPE/LIST_G_HEADERS/G_HEADERS">
<xapi:delivery>
<xapi:email id="123" server="nasmtp.us.XXX.com" port="25" from="${C_ORIGINAL_BUYER_EMAIL}" reply-to ="">
<xapi:message id="123" to="${C_VENDOR_CONTACT_EMAIL}" cc="" bcc=""
attachment="true"
subject="Purchase Order ${POH_PO_NUM} revision ${POH_REVISION_NUM} from XXX">
${POH_VENDOR_CONTACT_NAME},
${C_MAIL_SUBJECT}
PO number ${POH_PO_NUM} revision ${POH_REVISION_NUM}
Please reply to ${C_ORIGINAL_BUYER_EMAIL} - ${POH_ORG_ID}
Thank you,
${POH_BUYER}
</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output="${POH_PO_NUM}-rev${POH_REVISION_NUM}" output-type="pdf" delivery="123">
<xapi:template type="rtf" location="xdo://XXX.XXXPOXPRPOL.en.US/?getSource=true" filter=".//G_HEADERS[C_VENDOR_CONTACT_EMAIL !=''and POH_ORG_ID = 54]"></xapi:template>
<xapi:template type="rtf" location="xdo://XXX.XXXPOXPRPOL.fr.CA/?getSource=true" filter=".//G_HEADERS[C_VENDOR_CONTACT_EMAIL !='' and POH_ORG_ID = 161]"></xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
Please let me know how to call a translation template from bursting.
Thanks
Rajesh

Got the solution...
This is how we have to call a translation template from bursting file.
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
<xapi:request select="/XXXPRPOLXML/LIST_G_MANUAL_PO_NUM_TYPE/G_MANUAL_PO_NUM_TYPE/LIST_G_HEADERS/G_HEADERS">
<xapi:delivery>
<xapi:email id="123" server="nasmtp.us.XXX.com" port="25" from="${C_ORIGINAL_BUYER_EMAIL}" reply-to ="">
<xapi:message id="123" to="${C_VENDOR_CONTACT_EMAIL}" cc="" bcc=""
attachment="true"
subject="Purchase Order ${POH_PO_NUM} revision ${POH_REVISION_NUM} from XXX">
${POH_VENDOR_CONTACT_NAME},
${C_MAIL_SUBJECT}
PO number ${POH_PO_NUM} revision ${POH_REVISION_NUM}
Please reply to ${C_ORIGINAL_BUYER_EMAIL} - ${POH_ORG_ID}
Thank you,
${POH_BUYER}
</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output="${POH_PO_NUM}-rev${POH_REVISION_NUM}" output-type="pdf" delivery="123">
<xapi:template type="xsl-fo" location="xdo://XXX.XXXPOXPRPOL.fr.CA" filter=".//G_HEADERS[C_VENDOR_CONTACT_EMAIL !='' and POH_ORG_ID = 161 and CLANGUAGE2 = 'fr']"></xapi:template>
<xapi:template type="rtf" location="xdo://XXX.XXXPOXPRPOL.en.US/?getSource=true" filter=".//G_HEADERS[C_VENDOR_CONTACT_EMAIL !='' and POH_ORG_ID = 54 or POH_ORG_ID = 56 or (POH_ORG_ID = 161 and CLANGUAGE2 = 'en')]"></xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
where
XXX - Application shortname
XXXPOXPRPOL - Template Code
Hope this helps!!!!!!!!!!!!!!!!!!!!!
Regards
Rajesh

How to delete a row in table control?

Hi All,
I have a empty table control which is only use for data input(this data will then be use to store information to a custom table). I have two buttons, Create Entry and Delete Entry.
In my screenPainter for the table control, I have the checkbox w/SelColumn ticked and assign variable T_DATA-MARK on it.
In my code:
TOP Include
CONTROLS: tc_data      TYPE TABLEVIEW USING SCREEN 9001.
PBO
PROCESS BEFORE OUTPUT.
LOOP WITH CONTROL TC_ID.
    MODULE LOAD_TABLECTRL.
ENDLOOP.
module LOAD_TABLECTRL output.
READ TABLE T_DATA INTO WA_DATA INDEX TC_DATA-current_line.
IF SY-SUBRC EQ 0.
    MOVE-CORRESPONDING T_DATA TO WA_DATA.
ENDIF.
endmodule.
PAI
PROCESS AFTER INPUT.
   LOOP WITH CONTROL TC_ID.
   ENDLOOP.
MODULE GET_USER_ACTION.
module GET_USER_ACTION input.
WHEN 'DEL'.
    LOOP AT T_DATA INTO WA_DATA WHERE MARK EQ 'X'.
      DELETE T_DATA.
    ENDLOOP.
In my debug, the internal table T_DATA-MARK does not have any value(s) even if I selected a particular row in my table control.
Am I missing something here?
Thanks

Hi All,
Please see the actual screenshots and code below:
The aim of the table control is just to accept inputs, so the internal table in the PBO is always empty.
Table Control Screen Painter ScreenShot and Actual SAP Output: http://img710.imageshack.us/img710/4751/tablecontrolrowdelete.jpg
PBO
PROCESS BEFORE OUTPUT.
LOOP WITH CONTROL TC_ID.
    MODULE LOAD_TABLECTRL.
ENDLOOP.
module LOAD_TABLECTRL output.
READ TABLE T_ID_CHECK INTO WA_ID_CHECK INDEX TC_ID-current_line.
IF SY-SUBRC EQ 0.
    MOVE-CORRESPONDING T_ID_CHECK TO TC_ID.
ELSE.
      "EXIT FROM STEP-LOOP.
      CLEAR ZQID_CHECK.
ENDIF.
PAI
PROCESS AFTER INPUT.
   LOOP WITH CONTROL TC_ID.
     CHAIN.
      MODULE CHECK_ENTRIES     ON CHAIN-INPUT.
      MODULE MODIFY_T_ID_CHECK ON CHAIN-INPUT.
      MODULE DELETE_ROW        ON CHAIN-INPUT
     ENDCHAIN.
   ENDLOOP.
module CHECK_ENTRIES input.
CASE ok_code.
    WHEN 'DEL'.
        PERFORM F_FILL_ITABCREATE USING ZQID_CHECK-MATNR
                                        ZQID_CHECK-LICHA
                                        ZQID_CHECK-LIFNR.
ENDCASE.
endmodule.
module MODIFY_T_ID_CHECK input.
DATA W_TEMPMARK(1) TYPE C.
MOVE: T_ID_CHECK-MARK TO W_TEMPMARK,
        W_TEMPMARK TO T_ID_CHECK-MARK.
MODIFY T_ID_CHECK INDEX SY-TABIX TRANSPORTING MARK.
endmodule.
module DELETE_ROW input.
LOOP AT T_ID_CHECK WHERE MARK EQ 'X'.
    DELETE T_ID_CHECK.
ENDLOOP.
endmodule.
form F_FILL_ITABCREATE using    us_zqid_check_matnr LIKE MARA-MATNR
                                 us_zqid_check_licha LIKE MCHA-LICHA
                                 us_zqid_check_lifnr LIKE LFA1-LIFNR.
MOVE: us_zqid_check_matnr TO WA_ID_CHECK-MATNR,
        us_zqid_check_licha TO WA_ID_CHECK-LICHA,
        us_zqid_check_lifnr TO WA_ID_CHECK-LIFNR.
APPEND WA_ID_CHECK TO T_ID_CHECK.
CLEAR WA_ID_CHECK.
endform.
In my debug, I can now delete the internal table that has a 'X' mark on its respective row but on the SAP screen output, all of my entries are being deleted contrary to what the ABAP debugger is telling me.
Thanks

How to delete a row in table control(accepts only input)?

Hi All,
I have an empty table control which is only use for data input(this data will then be use to store information to a custom table). I have two buttons, Create Entry and Delete Entry.
In my screenPainter for the table control, I have the checkbox w/SelColumn ticked and assign variable T_DATA-MARK on it.
Please see the actual screenshots and code below:
The aim of the table control is just to accept inputs, so the internal table in the PBO is always empty.
Table Control Screen Painter ScreenShot and Actual SAP Output:
http://img710.imageshack.us/img710/4751/tablecontrolrowdelete.jpg
PBO
PROCESS BEFORE OUTPUT.
LOOP WITH CONTROL TC_ID.
    MODULE LOAD_TABLECTRL.
ENDLOOP.
module LOAD_TABLECTRL output.
READ TABLE T_ID_CHECK INTO WA_ID_CHECK INDEX TC_ID-current_line.
IF SY-SUBRC EQ 0.
    MOVE-CORRESPONDING T_ID_CHECK TO TC_ID.
ELSE.
      "EXIT FROM STEP-LOOP.
      CLEAR ZQID_CHECK.
ENDIF.
PAI
PROCESS AFTER INPUT.
   LOOP WITH CONTROL TC_ID.
     CHAIN.
      MODULE CHECK_ENTRIES     ON CHAIN-INPUT.
      MODULE MODIFY_T_ID_CHECK ON CHAIN-INPUT.
      MODULE DELETE_ROW        ON CHAIN-INPUT
     ENDCHAIN.
   ENDLOOP.
module CHECK_ENTRIES input.
CASE ok_code.
    WHEN 'DEL'.
        PERFORM F_FILL_ITABCREATE USING ZQID_CHECK-MATNR
                                        ZQID_CHECK-LICHA
                                        ZQID_CHECK-LIFNR.
ENDCASE.
endmodule.
form F_FILL_ITABCREATE using    us_zqid_check_matnr LIKE MARA-MATNR
                                 us_zqid_check_licha LIKE MCHA-LICHA
                                 us_zqid_check_lifnr LIKE LFA1-LIFNR.
MOVE: us_zqid_check_matnr TO WA_ID_CHECK-MATNR,
        us_zqid_check_licha TO WA_ID_CHECK-LICHA,
        us_zqid_check_lifnr TO WA_ID_CHECK-LIFNR.
APPEND WA_ID_CHECK TO T_ID_CHECK.
CLEAR WA_ID_CHECK.
endform.
module MODIFY_T_ID_CHECK input.
DATA W_TEMPMARK(1) TYPE C.
MOVE: T_ID_CHECK-MARK TO W_TEMPMARK,
        W_TEMPMARK TO T_ID_CHECK-MARK.
MODIFY T_ID_CHECK INDEX SY-TABIX TRANSPORTING MARK.
endmodule.
module DELETE_ROW input.
LOOP AT T_ID_CHECK WHERE MARK EQ 'X'.
    DELETE T_ID_CHECK.
ENDLOOP.
endmodule.
Edited by: Jaime Cabanban on Jan 7, 2010 8:46 PM

Debugging the PBO part after deletion will help you know why the rows are getting deleted
This is the sap doc answer for you question regarding LINE.
Controls the scroll bar of the table control. At LOOP without internal table, LINES has the initial value zero and must be set in the program so that the scroll bar can be used. At LOOP AT <itab> the system sets this component to the number of rows of the internal table, whenever the table control is processed for the first time. The initialization event of a table control is not determined uniquely. If the corresponding internal table is not fully created at this event, then the LINES variable receives an incorrect value. If LINES in the LOOP loop is smaller as the number of rows of the internal table, then the table control contains blank rows at the end.
Therefore you should always set the LINES component explicitly in the ABAP program, including at LOOP AT <itab>. In this way you have full control over the dimensions of the vertical scroll bar and so can control the number of rows that are ready for input. Initialization should usually occur at PBO directly before the LOOP statement for the table control.

How to delete a row from table control

I have created a push button on the screen for delete.
its getting stored in ok_code.
'FLAG' is the name of the mark on the table control.
I am getting probs in this line.
I am not getting anything in mark_field.
ASSIGN COMPONENT p_mark_name OF STRUCTURE <wa> TO <mark_field>.
The code is:
MODULE tablctrl2_user_command INPUT.
PERFORM user_ok_tc USING    'TABLCTRL2'
                              'I_ZSKILLEMP'
                              'FLAG'
                     CHANGING ok_code.
ENDMODULE.
FORM user_ok_tc USING    p_tc_name TYPE dynfnam
                         p_table_name
                         p_mark_name
                CHANGING p_ok      LIKE sy-ucomm.
-BEGIN OF LOCAL DATA----
DATA: l_ok              TYPE sy-ucomm,
        l_offset          TYPE i.
-END OF LOCAL DATA----
Table control specific operations                                    *
evaluate TC name and operations                                    *
SEARCH p_ok FOR p_tc_name.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
l_offset = strlen( p_tc_name ) + 1.
l_ok = p_ok+l_offset.
execute general and TC specific operations                           *
CASE l_ok.
    WHEN 'INSR'.                      "insert row
      PERFORM fcode_insert_row USING    p_tc_name
                                        p_table_name.
      CLEAR p_ok.
    WHEN 'DELE'.                      "delete row
      PERFORM fcode_delete_row USING    p_tc_name
                                        p_table_name
                                        p_mark_name.
      CLEAR p_ok.
FORM fcode_delete_row
              USING    p_tc_name           TYPE dynfnam
                       p_table_name
                       p_mark_name   .
-BEGIN OF LOCAL DATA----
DATA l_table_name       LIKE feld-name.
FIELD-SYMBOLS <tc>         TYPE cxtab_control.
FIELD-SYMBOLS <table>      TYPE STANDARD TABLE.
FIELD-SYMBOLS <wa>.
FIELD-SYMBOLS <mark_field>.
-END OF LOCAL DATA----
ASSIGN (p_tc_name) TO <tc>.
get the table, which belongs to the tc                               *
CONCATENATE p_table_name '[]' INTO l_table_name. "table body
ASSIGN (l_table_name) TO <table>.                "not headerline
delete marked lines                                                  *
DESCRIBE TABLE <table> LINES <tc>-lines.
LOOP AT <table> ASSIGNING <wa>.
access to the component 'FLAG' of the table header                 *
    ASSIGN COMPONENT p_mark_name OF STRUCTURE <wa> TO <mark_field>.
    IF <mark_field> = 'X'.
      DELETE <table> INDEX syst-tabix.
      IF sy-subrc = 0.
        <tc>-lines = <tc>-lines - 1.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.

Hi...
i got the same prob...but got the solution too...
you have to take an internal table of same type of dbase table..and maintain a flag in it...which will be get filled automatically with 'X'.
here is the code..go throug it..
REPORT YH642_DIALOG_TABLECONTROL.
CALL SCREEN 999.
DATA:
W_INDEX TYPE I.
DATA:
W_UCOMM LIKE SY-UCOMM.
***&SPWIZARD: DATA DECLARATION FOR TABLECONTROL 'TAB'
*&SPWIZARD: DEFINITION OF DDIC-TABLE
TABLES:   YH642_RAM.
DATA:
BEGIN OF DDTAB,
    TAB_FLAG TYPE C,
    MANDT LIKE YH642_RAM-MANDT,
    EID    LIKE YH642_RAM-EID,
    ENAME LIKE YH642_RAM-ENAME,
    MOBILE LIKE YH642_RAM-MOBILE,
END OF DDTAB.
*&SPWIZARD: TYPE FOR THE DATA OF TABLECONTROL 'TAB'
TYPES: BEGIN OF T_TAB,
         TAB_FLAG TYPE C,
         MANDT LIKE YH642_RAM-MANDT,
         EID LIKE YH642_RAM-EID,
         ENAME LIKE YH642_RAM-ENAME,
         MOBILE LIKE YH642_RAM-MOBILE,
       END OF T_TAB.
*&SPWIZARD: INTERNAL TABLE FOR TABLECONTROL 'TAB'
DATA:     G_TAB_ITAB   TYPE T_TAB OCCURS 0,
          H_TAB_ITAB   TYPE T_TAB OCCURS 0,
          G_TAB_WA     TYPE T_TAB. "work area
DATA:     G_TAB_COPIED.           "copy flag
*&SPWIZARD: DECLARATION OF TABLECONTROL 'TAB' ITSELF
CONTROLS: TAB TYPE TABLEVIEW USING SCREEN 0999.
*&SPWIZARD: LINES OF TABLECONTROL 'TAB'
DATA:     G_TAB_LINES LIKE SY-LOOPC.
DATA:     OK_CODE LIKE SY-UCOMM.
*&SPWIZARD: OUTPUT MODULE FOR TC 'TAB'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: COPY DDIC-TABLE TO ITAB
MODULE TAB_INIT OUTPUT.
IF G_TAB_COPIED IS INITIAL.
*&SPWIZARD: COPY DDIC-TABLE 'YH642_RAM'
*&SPWIZARD: INTO INTERNAL TABLE 'g_TAB_itab'
    SELECT * FROM YH642_RAM
       INTO CORRESPONDING FIELDS
       OF TABLE G_TAB_ITAB.
    G_TAB_COPIED = 'X'.
    H_TAB_ITAB[] = G_TAB_ITAB[].
    REFRESH CONTROL 'TAB' FROM SCREEN '0999'.
ENDIF.
ENDMODULE.                    "TAB_INIT OUTPUT
*&SPWIZARD: OUTPUT MODULE FOR TC 'TAB'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: MOVE ITAB TO DYNPRO
MODULE TAB_MOVE OUTPUT.
MOVE-CORRESPONDING G_TAB_WA TO DDTAB.
ENDMODULE.                    "TAB_MOVE OUTPUT
*&SPWIZARD: OUTPUT MODULE FOR TC 'TAB'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: GET LINES OF TABLECONTROL
MODULE TAB_GET_LINES OUTPUT.
G_TAB_LINES = SY-LOOPC.
ENDMODULE.                    "TAB_GET_LINES OUTPUT
*&SPWIZARD: INPUT MODULE FOR TC 'TAB'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: MODIFY TABLE
MODULE TAB_MODIFY INPUT.
MOVE-CORRESPONDING DDTAB TO G_TAB_WA.
MODIFY G_TAB_ITAB
    FROM G_TAB_WA
    INDEX TAB-CURRENT_LINE.
ENDMODULE.                    "TAB_MODIFY INPUT
*&SPWIZARD: INPUT MODULE FOR TC 'TAB'. DO NOT CHANGE THIS LINE!
*&SPWIZARD: PROCESS USER COMMAND
MODULE TAB_USER_COMMAND INPUT.
OK_CODE = SY-UCOMM.
PERFORM USER_OK_TC USING    'TAB'
                              'G_TAB_ITAB'
                              'TAB_FLAG'
                     CHANGING OK_CODE.
SY-UCOMM = OK_CODE.
ENDMODULE.                    "TAB_USER_COMMAND INPUT
INCLUDE TABLECONTROL_FORMS                                         *
*&      Form USER_OK_TC                                               *
FORM USER_OK_TC USING    P_TC_NAME TYPE DYNFNAM
                         P_TABLE_NAME
                         P_MARK_NAME
                CHANGING P_OK      LIKE SY-UCOMM.
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA: L_OK              TYPE SY-UCOMM,
        L_OFFSET          TYPE I.
&SPWIZARD: END OF LOCAL DATA----
*&SPWIZARD: Table control specific operations                          *
*&SPWIZARD: evaluate TC name and operations                            *
SEARCH P_OK FOR P_TC_NAME.
IF SY-SUBRC <> 0.
    EXIT.
ENDIF.
L_OFFSET = STRLEN( P_TC_NAME ) + 1.
L_OK = P_OK+L_OFFSET.
L_OK = 'DELE'.
*&SPWIZARD: execute general and TC specific operations                 *
CASE L_OK.
    WHEN 'INSR'.                      "insert row
      PERFORM FCODE_INSERT_ROW USING    P_TC_NAME
                                        P_TABLE_NAME.
      CLEAR P_OK.
    WHEN 'DELE'.           "delete row
     MESSAGE 'Are you really going to delete??' type 'I'.
      PERFORM FCODE_DELETE_ROW USING    P_TC_NAME
                                        P_TABLE_NAME
                                        P_MARK_NAME.
      CLEAR P_OK.
    WHEN 'P--' OR                     "top of list
         'P-' OR                     "previous page
         'P+' OR                     "next page
         'P++'.                       "bottom of list
      PERFORM COMPUTE_SCROLLING_IN_TC USING P_TC_NAME
                                            L_OK.
      CLEAR P_OK.
    WHEN 'L--'.                       "total left
      PERFORM FCODE_TOTAL_LEFT USING P_TC_NAME.
    WHEN 'L-'.                        "column left
      PERFORM FCODE_COLUMN_LEFT USING P_TC_NAME.
    WHEN 'R+'.                        "column right
      PERFORM FCODE_COLUMN_RIGHT USING P_TC_NAME.
    WHEN 'R++'.                       "total right
      PERFORM FCODE_TOTAL_RIGHT USING P_TC_NAME.
    WHEN 'MARK'.                      "mark all filled lines
      PERFORM FCODE_TC_MARK_LINES USING P_TC_NAME
                                        P_TABLE_NAME
                                        P_MARK_NAME   .
      CLEAR P_OK.
    WHEN 'DMRK'.                      "demark all filled lines
      PERFORM FCODE_TC_DEMARK_LINES USING P_TC_NAME
                                          P_TABLE_NAME
                                          P_MARK_NAME .
      CLEAR P_OK.
    WHEN 'SASCEND'   OR
         'SDESCEND'.                  "sort column
      PERFORM FCODE_SORT_TC USING P_TC_NAME
                                  l_ok.
ENDCASE.
ENDFORM.                              " USER_OK_TC
*&      Form FCODE_INSERT_ROW                                         *
FORM FCODE_INSERT_ROW
              USING    P_TC_NAME           TYPE DYNFNAM
                       P_TABLE_NAME             .
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_LINES_NAME       LIKE FELD-NAME.
DATA L_SELLINE          LIKE SY-STEPL.
DATA L_LASTLINE         TYPE I.
DATA L_LINE             TYPE I.
DATA L_TABLE_NAME       LIKE FELD-NAME.
FIELD-SYMBOLS <TC>                 TYPE CXTAB_CONTROL.
FIELD-SYMBOLS <TABLE>              TYPE STANDARD TABLE.
FIELD-SYMBOLS <LINES>              TYPE I.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc                     *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>.                "not headerline
*&SPWIZARD: get looplines of TableControl                              *
CONCATENATE 'G_' P_TC_NAME '_LINES' INTO L_LINES_NAME.
ASSIGN (L_LINES_NAME) TO <LINES>.
*&SPWIZARD: get current line                                           *
GET CURSOR LINE L_SELLINE.
IF SY-SUBRC <> 0.                   " append line to table
    L_SELLINE = <TC>-LINES + 1.
*&SPWIZARD: set top line                                               *
    IF L_SELLINE > <LINES>.
      <TC>-TOP_LINE = L_SELLINE - <LINES> + 1 .
    ELSE.
      <TC>-TOP_LINE = 1.
    ENDIF.
ELSE.                               " insert line into table
    L_SELLINE = <TC>-TOP_LINE + L_SELLINE - 1.
    L_LASTLINE = <TC>-TOP_LINE + <LINES> - 1.
ENDIF.
*&SPWIZARD: set new cursor line                                        *
L_LINE = L_SELLINE - <TC>-TOP_LINE + 1.
*&SPWIZARD: insert initial line                                        *
INSERT INITIAL LINE INTO <TABLE> INDEX L_SELLINE.
<TC>-LINES = <TC>-LINES + 1.
*&SPWIZARD: set cursor                                                 *
SET CURSOR LINE L_LINE.
ENDFORM.                              " FCODE_INSERT_ROW
*&      Form FCODE_DELETE_ROW                                         *
FORM FCODE_DELETE_ROW
              USING    P_TC_NAME           TYPE DYNFNAM
                       P_TABLE_NAME
                       P_MARK_NAME   .
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_TABLE_NAME       LIKE FELD-NAME.
FIELD-SYMBOLS <TC>         TYPE CXTAB_CONTROL.
FIELD-SYMBOLS <TABLE>      TYPE STANDARD TABLE.
FIELD-SYMBOLS <WA>.
FIELD-SYMBOLS <MARK_FIELD>.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc                     *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>.                "not headerline
*&SPWIZARD: delete marked lines                                        *
DESCRIBE TABLE <TABLE> LINES <TC>-LINES.
LOOP AT <TABLE> ASSIGNING <WA>.
*&SPWIZARD: access to the component 'FLAG' of the table header         *
    ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>.
    IF <MARK_FIELD> = 'X'.
      W_INDEX = SYST-TABIX.
      DELETE <TABLE> INDEX SYST-TABIX.
      IF SY-SUBRC = 0.
        <TC>-LINES = <TC>-LINES - 1.
      ENDIF.
    ENDIF.
ENDLOOP.
READ TABLE H_TAB_ITAB INDEX W_INDEX INTO G_TAB_WA.
IF SY-SUBRC EQ 0.
    MOVE-CORRESPONDING G_TAB_WA TO YH642_RAM.
    DELETE YH642_RAM.
ENDIF.
ENDFORM.                              " FCODE_DELETE_ROW
*&      Form COMPUTE_SCROLLING_IN_TC
      text
     -->P_TC_NAME name of tablecontrol
     -->P_OK       ok code
FORM COMPUTE_SCROLLING_IN_TC USING    P_TC_NAME
                                      P_OK.
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_TC_NEW_TOP_LINE     TYPE I.
DATA L_TC_NAME             LIKE FELD-NAME.
DATA L_TC_LINES_NAME       LIKE FELD-NAME.
DATA L_TC_FIELD_NAME       LIKE FELD-NAME.
FIELD-SYMBOLS <TC>         TYPE CXTAB_CONTROL.
FIELD-SYMBOLS <LINES>      TYPE I.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get looplines of TableControl                              *
CONCATENATE 'G_' P_TC_NAME '_LINES' INTO L_TC_LINES_NAME.
ASSIGN (L_TC_LINES_NAME) TO <LINES>.
*&SPWIZARD: is no line filled?                                         *
IF <TC>-LINES = 0.
*&SPWIZARD: yes, ...                                                   *
    L_TC_NEW_TOP_LINE = 1.
ELSE.
*&SPWIZARD: no, ...                                                    *
    CALL FUNCTION 'SCROLLING_IN_TABLE'
         EXPORTING
              ENTRY_ACT             = <TC>-TOP_LINE
              ENTRY_FROM            = 1
              ENTRY_TO              = <TC>-LINES
              LAST_PAGE_FULL        = 'X'
              LOOPS                 = <LINES>
              OK_CODE               = P_OK
              OVERLAPPING           = 'X'
         IMPORTING
              ENTRY_NEW             = L_TC_NEW_TOP_LINE
         EXCEPTIONS
             NO_ENTRY_OR_PAGE_ACT = 01
             NO_ENTRY_TO           = 02
             NO_OK_CODE_OR_PAGE_GO = 03
              OTHERS                = 0.
ENDIF.
*&SPWIZARD: get actual tc and column                                   *
GET CURSOR FIELD L_TC_FIELD_NAME
             AREA L_TC_NAME.
IF SYST-SUBRC = 0.
    IF L_TC_NAME = P_TC_NAME.
*&SPWIZARD: et actual column                                           *
      SET CURSOR FIELD L_TC_FIELD_NAME LINE 1.
    ENDIF.
ENDIF.
*&SPWIZARD: set the new top line                                       *
<TC>-TOP_LINE = L_TC_NEW_TOP_LINE.
ENDFORM.                              " COMPUTE_SCROLLING_IN_TC
*&      Form FCODE_TC_MARK_LINES
      marks all TableControl lines
     -->P_TC_NAME name of tablecontrol
FORM FCODE_TC_MARK_LINES USING P_TC_NAME
                               P_TABLE_NAME
                               P_MARK_NAME.
&SPWIZARD: EGIN OF LOCAL DATA----
DATA L_TABLE_NAME       LIKE FELD-NAME.
FIELD-SYMBOLS <TC>         TYPE CXTAB_CONTROL.
FIELD-SYMBOLS <TABLE>      TYPE STANDARD TABLE.
FIELD-SYMBOLS <WA>.
FIELD-SYMBOLS <MARK_FIELD>.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc                     *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>.                "not headerline
*&SPWIZARD: mark all filled lines                                      *
LOOP AT <TABLE> ASSIGNING <WA>.
*&SPWIZARD: access to the component 'FLAG' of the table header         *
    ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>.
    <MARK_FIELD> = 'X'.
ENDLOOP.
ENDFORM.                                          "fcode_tc_mark_lines
*&      Form FCODE_TC_DEMARK_LINES
      demarks all TableControl lines
     -->P_TC_NAME name of tablecontrol
FORM FCODE_TC_DEMARK_LINES USING P_TC_NAME
                                 P_TABLE_NAME
                                 P_MARK_NAME .
&SPWIZARD: BEGIN OF LOCAL DATA----
DATA L_TABLE_NAME       LIKE FELD-NAME.
FIELD-SYMBOLS <TC>         TYPE CXTAB_CONTROL.
FIELD-SYMBOLS <TABLE>      TYPE STANDARD TABLE.
FIELD-SYMBOLS <WA>.
FIELD-SYMBOLS <MARK_FIELD>.
&SPWIZARD: END OF LOCAL DATA----
ASSIGN (P_TC_NAME) TO <TC>.
*&SPWIZARD: get the table, which belongs to the tc                     *
CONCATENATE P_TABLE_NAME '[]' INTO L_TABLE_NAME. "table body
ASSIGN (L_TABLE_NAME) TO <TABLE>.                "not headerline
*&SPWIZARD: demark all filled lines                                    *
LOOP AT <TABLE> ASSIGNING <WA>.
*&SPWIZARD: access to the component 'FLAG' of the table header         *
    ASSIGN COMPONENT P_MARK_NAME OF STRUCTURE <WA> TO <MARK_FIELD>.
    <MARK_FIELD> = SPACE.
ENDLOOP.
ENDFORM.                                          "fcode_tc_mark_lines
*&      Module STATUS_0999 OUTPUT
      text
MODULE STATUS_0999 OUTPUT.
SET PF-STATUS 'SS_STD'.
SET TITLEBAR 'TITLE'.
ENDMODULE.                 " STATUS_0999 OUTPUT
*&      Module USER_COMMAND_0999 INPUT
      text
MODULE USER_COMMAND_0999 INPUT.
DATA:
    H_TAB_WA LIKE G_TAB_WA.
CASE W_UCOMM.
    WHEN 'BACK'.
      LEAVE PROGRAM.
    WHEN 'TAB_MODI' OR 'SAVE'.
      LOOP AT G_TAB_ITAB INTO G_TAB_WA.
      FORMAT   INPUT OFF.
        MOVE-CORRESPONDING G_TAB_WA TO YH642_RAM.
        READ TABLE H_TAB_ITAB WITH KEY EID = G_TAB_WA-EID INTO H_TAB_WA.
        IF SY-SUBRC EQ 0.
          IF G_TAB_WA NE H_TAB_WA.
            MODIFY YH642_RAM.
          ENDIF.
        ELSE.
          INSERT YH642_RAM.
        ENDIF.
      ENDLOOP.
SORT G_TAB_ITAB.
ENDCASE.
*CALL SCREEN 700.
ENDMODULE.                 " USER_COMMAND_0999 INPUT

How to delete selected row in table control

Hi all,
here is my coding for deleting selected row.
But it is not working correctly.
I am not able to delete seleced row.
If i press delete button it automatically delete from beginning instead of selected rows.
Can anyone can help me plz...
CONTROLS rowdeleting TYPE TABLEVIEW USING SCREEN 100.
TABLES zdetails.
data : begin of itab occurs 0,
NAME TYPE ZDETAILS-NAME,
ADDRES TYPE ZDETAILS-ADDRES,
CONTACTNO TYPE ZDETAILS-CONTACTNO,
INIT TYPE C,
end of itab .
DATA OK_CODE LIKE SY-UCOMM.
CALL SCREEN 100.
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'BACK'.
IF ITAB-INIT IS INITIAL.
SELECT NAME ADDRES CONTACTNO FROM ZDETAILS
INTO CORRESPONDING FIELDS OF TABLE ITAB.
DESCRIBE TABLE ITAB LINES rowdeleting-LINES.
ITAB-INIT = 'X'.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
MODULE CHANGE_SDYN_CONN OUTPUT.
READ TABLE itab INTO ZDETAILS INDEX rowdeleting-current_line.
ENDMODULE. " CHANGE_SDYN_CONN OUTPUT
MODULE READ_TABLE_CONTROL INPUT.
IF ITAB-INIT = 'X' AND OK_CODE = 'DELETE'.
DELETE ITAB index rowdeleting-current_line ."FROM ZDETAILS.
DESCRIBE TABLE ITAB LINES rowdeleting-LINES.
ENDIF.
ENDMODULE. " READ_TABLE_CONTROL INPUT
MODULE USER_COMMAND_0100 INPUT.
CASE OK_CODE.
WHEN 'BACK'.
LEAVE PROGRAM.
WHEN 'DELETE'.
IF ITAB-INIT = 'X' AND OK_code = 'DELETE'.
DELETE ITAB index rowdeleting-current_line .
ENDIF.
ENDCASE.
ENDMODULE.
regards ,
ranjith.

Hi,
Check the following code:
CONTROLS TABLE_CONTROL TYPE TABLEVIEW USING SCREEN 100.
TABLES SDYN_SDW4.
DATA SDYN_ITAB LIKE STANDARD TABLE OF SDYN_SDW4.
DATA INIT.
DATA OK_CODE LIKE SY-UCOMM.
DATA SAVE_OK LIKE SY-UCOMM.
DATA MARK.
DATA COL TYPE CXTAB_COLUMN.
CALL SCREEN 100.
*&      Module STATUS_0100 OUTPUT
      text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'GRUND'.
SET TITLEBAR '100'.
IF INIT IS INITIAL.
Datenbeschaffung
   SELECT CARRID CONNID CITYFROM AIRPFROM CITYTO AIRPTO DEPTIME ARRTIME
            DISTANCE DISTID
            FROM SPFLI
            INTO CORRESPONDING FIELDS OF TABLE SDYN_ITAB.
    DESCRIBE TABLE SDYN_ITAB LINES TABLE_CONTROL-LINES.
    INIT = 'X'.
ENDIF.
ENDMODULE.                             " STATUS_0100 OUTPUT
*&      Module FILL_TABLE_CONTROL OUTPUT
      text
MODULE CHANGE_SDYN_CONN OUTPUT.
you can change the content of current table control line via
sdyn_conn
READ TABLE sdyn_itab INTO sdyn_conn INDEX table_control-current_line.
ENDMODULE.                             " FILL_TABLE_CONTROL OUTPUT
*&      Module READ_TABLE_CONTROL INPUT
      text
MODULE READ_TABLE_CONTROL INPUT.
Check input values
IF MARK = 'X' AND SAVE_OK = 'DELETE'.
    DELETE TABLE SDYN_ITAB FROM sdyn_sdw4.
    DESCRIBE TABLE SDYN_ITAB LINES TABLE_CONTROL-LINES.
ENDIF.
ENDMODULE.                             " READ_TABLE_CONTROL INPUT
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE USER_COMMAND_0100 INPUT.
SAVE_OK = OK_CODE.
CLEAR OK_CODE.
CASE SAVE_OK.
    WHEN 'SORT'.
      DATA: FLDNAME(100),HELP(100).
      READ TABLE TABLE_CONTROL-COLS INTO COL WITH KEY SELECTED = 'X'.
      SPLIT COL-SCREEN-NAME AT '-' INTO HELP FLDNAME.
      SORT SDYN_ITAB BY (FLDNAME).
ENDCASE.
ENDMODULE.                             " USER_COMMAND_0100 INPUT
*&      Module EXIT INPUT
      text
MODULE EXIT INPUT.
LEAVE PROGRAM.
ENDMODULE.                 " EXIT INPUT
Regards,
Bhaskar

How to specify a JRE range in jnlp file?

We have a java app which uses Java Web Start. The jnlp file is configured with [j2se version="1.5+"]. So if JRE 1.5 and 1.6 are installed, the app is run on 1.6.
Now, we have requirement where the app should be restricted to run only within the range - JRE 1.5.0_07 through JRE 1.5.0_17
[j2se version="1.5*"] will not work - it will always launch the app with the latest jre from 1.5 family.
I can request an exact product version by including the href attribute. [j2se version="1.5.0_14" href="http://java.sun.com/products/autodl/j2se"/]
But how do I specify a specific range of JREs in the jnlp file so that JWS picks up a JRE from that range only? So if 1.5.0_07, 1.5.0_17 and JRE 6 are installed, it should run the app on 1.5.0_17.
Can JNLP really allow you to select specific range of JREs? Is there a good way to accomplish this? Please help.

sunjavaboy wrote:
..how do I specify a specific range of JREs in the jnlp file so that JWS picks up a JRE from that range only? So if 1.5.0_07, 1.5.0_17 and JRE 6 are installed, it should run the app on 1.5.0_17.From the JNLP Specification
*4.6 Java Runtime Environment*
Several JREs can be specified, which indicates a prioritized list of the supported JREs, with the most preferred version first. For example,
    <java version="1.3" initial-heap-size="64m"/>
    <java version="1.2">
      <resources> ... </resources>
    </java>So your app. would need more along the lines of..
    <java version="1.5.0_07 1.5.0_08 1.5.0_09 1.5.0_10 1.5.0_11 1.5.0_12 1.5.0_07 1.5.0_13 1.5.0_14 1.5.0_15 1.5.0_16 1.5.0_17 " />
    <java version="1.6+" />Actually you'd need the list of 1.5 versions reversed. Well, you get the idea hopefully. For more on versioning, see my [JWS versioning page|http://pscode.org/jws/version.html].

How to specify fonts in text in SVG file?

I've got an Edge Animate composition that includes a bunch of SVG files which specify (inside the svg files themselves) that a particular font should be used. So for instance, there's text in the SVG that's set to render in Arial. If I view that SVG by itself in the browser, the text is rendered in Arial. But when that SVG is part of an Edge composition, the text in that SVG reverts to some other default font.
The same problem happens when I try to specify a custom web font inside the SVG. The web font shows up fine when viewing the SVG independently, but when it's part of an Edge composition, it reverts to a default (Some serif font: Times, I think.)
Let me stress this is NOT about specifying the fonts in Edge itself (by adding the web font to the edge composition, and then styling text from within the Edge Animate interface): this is about text that has been specified in the SVG file in Illustrator. That font specification is ignored when the SVG is brought into Edge.
This text in the SVG shows as Arial when I'm in the Edge Animate interface, but when I view the whole composition in the browser, that's when it reverts to a different font.
Any ideas what's going on here?

Thanks for the reply. Yes, I've given up on fonts embedded in SVGs for now. I tried using SVGs with all text converted to outlines. That solved the type problem. But it of course made all the SVGs very large. I'm now having a problem with the Edge composition not fully loading.
It throws some javascript errors that indicate that al the libraries haven't loaded. Or, sometimes it just pulls up a blank page and nothing ever shows up, even when there are no javascript errors. The errors are mostly this:
Uncaught ReferenceError: jQuery is not defined byod_edgeActions.js:191(anonymous function)byod_edgeActions.js:191
Uncaught TypeError: Object #<Object> has no method 'okToLaunchComposition' byod_edgePreload.js:27
edgeCallbackbyod_edgePreload.js:27
(anonymous function)byod_edgePreload.js:15
tbyod_edgePreload.js:11
dbyod_edgePreload.js:10
I.b.onreadystatechange.b.onloadbyod_edgePreload.js:10
So I'm thinking the loader is trying to move on to execute code when it hasn't loaded what it needs. This was happening on Firefox and Chrome. So now I've converted some of the larger SVGs to PNGs, which brought their file size down considerably. This eliminated the error on Firefox, but I'm still getting it in Chrome. I think it's just taking too long to load all my animations. It's a pretty big composition: an infographic that's 548 px wide by 3100 px tall. It has 8 animations in it, each as a symbol. There are perhaps 80 individual graphic elements in total that are involved in the animations.
Even when those graphic files are as small as I can make them, Chrome still errors out before displaying anything.
If it just turns out that this is too big a composition to be done in Edge Animate, I'm in big trouble, as a client has already paid for this.
I'm hoping I can find a way to slow down the loader and make it wait until everything is loaded before moving on. But it's tough, as the edgePreload.js file wasn't meant to be tampered with, and is minified. I don't mind having a preload image appear for a while with a "loading..." message. But if it never loads...
Not sure how to proceed, really.

How to convert a row value in CSV file to column value

Hi
We have one requirement where we have to show the row value to column level value
for Example:
Source file will be in below format
Component Name :101
**Batch #     **100% Mod     200% Mod      300% Mod      400% Mod     Tensile     Elongation     Thickness*
8584-17     498     1211     1986     2601     3133 523     0.088
Output Format has to be:
**Batch #     **100% Mod     200% Mod      300% Mod      400% Mod     Tensile     Elongation     Thickness Component name*
8584-17     498     1211     1986     2601     3133 523     0.088 101
How can we achieve this using shell/Perl script

.

How to specify inclusion and exclusion rules for File data sources

This is the seed URL for a file data source: file://localhost/c:/myDir/
I want to exclude indexing and searching of files under: file://localhost/c:/myDir/obsolete/
What is the exact format for the exclusion URL?
I have tried both file://localhost/c:/myDir/obsolete/ and /myDir/obsolete/
but neither of it seems to work; it still indexes everything under /myDir/
Should I just put: /obsolete/ as the exclusion URL?
Also after initial crawling, if I change the inclusion and or exclusion rules and then run the crawler again, it should update the indexes accordingly. Is that right?
The version of UltraSearch I am using is 1.0.3.
Thanks for any help on this.

Try "/c:/myDir/obsolete/"
Changing inclusion/exclusion rule does not affect files already crawled. It onyl
affects next crawling behavior.
To do any DML to existing data set, use SQL directly on wk$url table under the instance owner.

How to check the contents of Control file, Log file & Parameter file

Can anybody help me how i can check the contents of Control file, Log file & Parameter file.
Arif

OK ...
Parameter file:
It will normally be in the $ORACLE_HOME/dbs directopry. It could be aan init{sid}.ora or a spfile{sid}.ora ... do not edit an SPFILE as yu could corrupt it.
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14231/create.htm#sthref434
If it's an init{sid}.ora, use any editor to see the actual content.
If it's a spfile{sid}.ora, use one of V$PARAMETER, V$PARAMETER2, V$SYSTEM_PARAMETER, V$SYSTEM_PARAMETER2 as aappropriate (read the Reference manual to get an idea about when each is appropriate)
Control File:
You should not edit a control file. It consists of many areas, as described here http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14220/physical.htm#i10135 and each are is interrogated by V$views as given in the reference manual. The following V$views all deal with some aspect of the control file or provide info about the control files or the contents of control files:
V$ARCHIVE_DEST
V$ARCHIVED_LOG
V$BACKUP_ARCHIVELOG_DETAILS
V$BACKUP_CONTROLFILE_DETAILS
V$BACKUP_CONTROLFILE_SUMMARY
V$BACKUP_COPY_DETAILS
V$BACKUP_COPY_SUMMARY
V$BACKUP_CORRUPTION
V$BACKUP_DATAFILE
V$BACKUP_DATAFILE_DETAILS
V$BACKUP_FILES
V$BACKUP_PIECE
V$BACKUP_REDOLOG
V$BACKUP_SET
V$BACKUP_SET_DETAILS
V$BACKUP_SPFILE
V$CONTROLFILE
V$CONTROLFILE_RECORD_SECTION
V$COPY_CORRUPTION
V$DATABASE
V$DATABASE_INCARNATION
V$DATAFILE
V$DATAFILE_COPY
V$DATAFILE_HEADER
V$DELETED_OBJECT
V$LOCK
V$LOG
V$LOG_HISTORY
V$LOGHIST
V$OBSOLETE_BACKUP_FILES
V$OFFLINE_RANGE
V$PROXY_COPY_DETAILS
V$PROXY_COPY_SUMMARY
V$PROXY_DATAFILE
V$RMAN_BACKUP_JOB_DETAILS
V$RMAN_BACKUP_SUBJOB_DETAILS
V$RMAN_CONFIGURATION
V$SESSION
V$TABLESPACE
V$THREAD
V$UNUSABLE_BACKUPFILE_DETAILS
3) Log Files
The contents of the log files are viewed using LogMiner - read Chapter 11 of the Oracle Utilities manual

Im What Control File is the Max Roles specified?

I am trying to load a database using Oracle Data Manager. The load crashes however because the maximum number of roles is exceeded at some point. I believe that I once heard from somebody that the max number of roles can be specified in some startup or control file located under $ORACLE_HOME /database. Can somebody please tell me which of the files it is and what parameter must be edited?

SQL> show parameter max_enabled_roles
check out the value
then cd $oracle_base/admin/sid/pfile/initSId.ora
set the values in UNIX envronment

How to specify ^M row delimeter in control file?

Similar Messages

Maybe you are looking for