How to split Windows Vista DVD image?
I would like to ask how to split windows vista DVD image into specific size using Windows PE Tools Command Prompt.
Thanks in advanced.
Hi,
You can try the following method:
1. Install UltraISO and Windows AIK.
Windows AIK:
http://www.microsoft.com/downloads/details.aspx?FamilyID=94bb6e34-d890-4932-81a5-5b50c657de08&DisplayLang=en
2. Use UltraISO to open the Windows Vista DVD and extract install.wim under the Sources folder to the local hard drive, for example: D:\Vista\sources\install.wim.
3. Run Windows PE Tools Command Prompt in elevated mode and type the following command:
imagex /split D:\vista\sources\install.wim D:\temp\install.swm 380
Note: D:\vista\sources\install.wim is the name and location of the file which will be split from. D:\temp\install.swm is the name and location of the target file. 380 is each target file size.
Note: Before doing this, make sure partition D has at least 5GB of free disk space.
After that, you will get 6 target files named install.swm, install2.swm, install3.swm, install4.swm, install5.swm and install6.swm in D:\temp.
4. Use UltraISO to open the Windows Vista DVD. Delete install.wim under the Sources folder and drag install.swm to this folder. Save the whole disk to the local hard drive and we will get CD1.
5. Open UltraISO and create a new folder named Sources. Drag install2.swm, install3.swm, install4.swm, install5.swm and install6.swm to the Sources folder. Save install2.swm to the local hard drive and we will get CD2. Use the same method to create CD3, CD4, CD5 and CD6.
6. Burn the iso files to CDs.
The steps above can be a little complex. I recommend obtaining a DVD drive to install Windows Vista.
Hope it helps.
Tim Quan - MSFT
Similar Messages
-
Windows Vista + N95 + Image Store - "Error communi...
I am trying to store images from my N95 using the Image Store application. This worked beautifully in XP, but after upgrading to Vista, all I get is a dialog box telling me "Error communicating with the phone".
This happens for both Bluetooth and USB connection, and it doesn't help that I set the Image Store to XP compatability, or run as admin. I really miss the Image Store functionality, it took the fuss out of storing images from the phone completely.
How can I fix this?
Details: Nokia N95
V12.0.013
19-06-07
RM-159
Nokia N95 (03.01)
Window Vista Business
PC Sync - 6.84.10.3
Image Store 6.83.0.0
Best regards,
GoranThere is another cause and cure I think cause I just "fixed" my problem of this kind over many hours of agonising and trying the suggestions above. Another internet site tells you :
"This usually happens for the simple reason that Gallery on the S60 device is running and currently holding open one of the files you're trying to backup (and delete). Switch to Gallery on the smartphone, back out of the image or video clip and use 'Exit'. Now try the 'Store images' function again - it should work fine!"
Unfortunately I couldn't obviously see a photo open in the Gallery. I was trying to store 103 images and I noticed it was stopping at one. I had a look at that one, it was not that important so I deleted it and try again. And it worked! It was as if it was evil, and blocking the software at that point. So it backed up about 70 images and jammed again. Found another image which I remember taking with the camera about a week ago and deleted that one, again not too important. Tried again and it went all the way backing up to a photo I took yesterday.
So that's it, something is left half open when the photo is saved and it screws up image store when it reaches it. Actually, I think that last image which I took I screwed up by closing the camera cover before it had finished doing its thing. I think now the moral of the story is that the digital camera in my N82 and it's softwared needs some TLC, it is not that robust, you need to give it a few seconds to do it's thing or it half saves these corrupted images. I could view the stuffed up image perfectly on the camera and Im sure there would be a better technical way of properly closing it in symbian rather than deleting it but yay it is solved!! -
Re: Satellite C660D-102 - How to copy Windows on DVD?
Hello people. I have bought a new Toshiba Satellite C660D-102.
The seller told me to copy Windows on DVDs soon to open the laptop. Do not know where to take the Windows installation files. You've encountered this problem? How can I fix this problem.Hey,
I think the seller did mean creating the Toshiba recovery disk that contains an image of factory settings. In case you cant start Windows anymore or the HDD must be replaced you can use this disk to restore Windows with all drivers and tools. With other words you get factory settings back, the same settings as you purchased the notebook so its very useful and easy.
You can create this disk if you start Toshiba recovery media creator that is preinstalled on your computer. Depending on the installation you need some blank DVD mediums. I would recommend high quality mediums, Typ: DVD-R from Verbatim or TDK. They work good and other users here can recommend them too.
Last but not least you should also read your user manual. It contains interesting information about this and other interesting things. Its also preinstalled on your notebook. :)
But its really great the seller gave you a hint about this. If you check other forum threads you will read about lot of other users they forget to create this disk and are not able to restore factory settings if Windows failed to start. -
Macbook Pro won't recognize windows vista dvd
Hi everyone,
I just bought Leopard and a new copy of Windows Vista Home Premium to install on my Macbook Pro. Leopard installed fine. Had some issues partitioning (had to get the right size b/c of unmovable files). Anyway, i made a 27gb partition to install my Vista. However, when I put my install dvd into the drive, it spins, makes a funny noise, then asks for the install dvd. After it spins the dvd some more, it spits it out. It doesn't seem to recognize the install dvd. I've put the Vista dvd into my PC and it runs fine. I would greatly appreciate any and all suggestions.
Thank you.I have exactly the same issue as you with mac not recognising the Vista Home Premium DVD either in Bootcamp or in the Finder. The applecare people were completely clueless and the guys at the "Genius" bar in the apple store were less than impressive and were insisting that it was a faulty DVD. Since i had tested it on various PCs and it worked fine, i knew it wasn't that. After 30 minutes of arguing they finally agreed to replace my DVD drive which unfortunately didn't help either. I have now ordered alternative media from Microsoft in the form of CDs for the cost of postage and will try that when they arrive and let you know. This is a problem that i'm seeing in various forums all over the place and is clearly some bizzare issue with Mac software or hardware which Apple refuses to acknowledge exists. P.S, don't bother re-creating the DVD as i tried copying the image to a USB drive on a PC and then burning it onto a blank DVD via the Mac. Although this allows the finder to mount the new DVD, Bootcamp still won't recognise the disc as a valid installer disc. More soon...
-
How different is Windows Vista run on Macbook Pro with 128MB and 256MB VRAM
Hi guys,
I am going to buy a MacBook Pro soon. But I am struggling picking the right model for me due to that I am not sure how differently Windows Vista is run on them.
I don't use much CPU intensive programs. CPU power is not an issue to me. RAM? I will install 2GHz of it regardless which model I will buy. The only thing worries me is the VRAM.
I would love to have smooth experience with the Aero effects. So how much will the difference in VRAM really make?At this time Windows Vista is not fully supported by using Apples Boot Camp program. It has been done but people that I personally know that have done it have not much success. I currently am running Windows Vista (non beta) in a parallels session and it runs quite nicely. But I don't get the Aero effects. I would certainly suggest 256MB VRAM Microsoft suggests 128 and their suggestions are for minimal performance. 256 will give you the best performance. Hope this helps.
PS Welcome to Apple Discussions. -
How to reinstall windows vista sp-1 64 bit without a cd?
my laptop series is L305 s5937, no response at all, once it has done checking disc and auto restart but still can't access my computer,pls help,thanks friends
Solved!
Go to Solution.Since you have data you want to recover, and in re-reading your first post, let's see if we can get your system started again.
On power up, as soon as you see the Toshiba logo, repeatedly press the 'F8' key to try to enter the Advanced Boot Options (ABO) menu. In the ABO menu, if the option is available, select 'Repair your computer', then select 'Startup Repair'
How to Boot to the Advanced Boot Options in Vista
Advanced startup options
What are the system recovery options in Windows Vista?
Let the Startup Repair run, this could take a while. When it is finished try to reboot into Windows again.
Please let us know what happens. Good luck.
Mike -
Portege R400-106 - where to get 64-bit Windows Vista DVD?
Hello:
have ordered this notebook with 4GB, but the OS is Windows Vista Ultimate 32bit, meaning that I cannot use more than 3GB.
Could you please advise where to get the 64-bit Windows Vista Ultimate DVD so that I can upgrade?
Please, could you email me at [email protected]?
Thank you.Hi
I think this question can be answered only by a Toshiba person. This is a simply a user to user forum and you will not meet here anybody from Toshiba.
But I will provide my own opinion.
Regarding point
1) Toshiba hasnt supported the 64bit in the past and I believe it will take several times till such 64bit OS will be supported. Who knows.
2) Dont think you will receive the 64bit Toshiba DVD. If Toshiba will decided to support the 64bit drivers then you have to purchase the Vista 64bit OS and then you could be able to use the Toshiba drivers from the website.
3) As I said, if you wan to use the 64bit OS you have to purchase it.
Regards -
I have a Ideapad Y430 that came without any DVD but with Vista preinstalled. Is there any way to burn a Vista DVD that can be used for recovery in case of problems (without using OneKey)
Thanks.Do you want a Vista installation disk?
Or
Do you want to create a recovery disk?
For the former, you must contact Lenovo for the Vista installation media.
For the latter, you can use OneKey to create a base backup and then burn the recovery disk. However, this recovery disk only works if the partition size remains unchanged. You will need to create a partition of the exact size for the disks to work on a new hard drive [if replaced].
\\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others // -
How can I create a DVD image that PC users can retrieve and burn...
I need to create a DVD disc image that PC users can retrieve from a private network share and burn to a blank DVD. Once burned, it needs to auto-start at the Menu. The master works fine. Images burned using the Mac Disk Utility work fine. But I have little control over who will download the image or the method by which they will burn it, so I need to provide visitors with guidance. Thank you in advance for any assistance you can provide.
Thank Jeff for this one.....
http://homepage.mac.com/geerlingguy/macsupport/mac_help/pages/0023-convert_dmg_imgiso.html
I've also heard that you can just copy an ".img" iDVD image to a pc, change the extension to .iso and then burn with Nero, etc. But I haven't tried it myself.....
John B. -
How to recover Windows Vista on Satellite A210?
My friend bought Thoshiba Satellite A210. The machine is running slow, so he wants to reinstall Vista.
Can we recover it from hard drive?
He does not have any CD coming with the laptop.
Thanks.The A210 was definitely delivered with the Toshiba Recovery DVD which would help you to get the notebook back to the factory settings.
As far as I know the A210 was not equipped with the HDD Recovery option and therefore the Recovery DVD should be in the package.
If you dont have the Recovery DVD anymore, then you could order it here:
https://backupmedia.toshiba.eu/landing.aspx
Bye -
How to install Windows 7/Vista as 2nd OS and retain predesktop environment (service partition)
This is a step-by-step instruction how to install Windows Vista or Windows 7 as a second OS on a Lenovo Thinkpad that originally shipped with Windows XP AND how to retain the access to the Lenovo Service Partition.
I have been searching the internet for instructions like these but could not find anything useful. So I am posting it
here. Maybe this helps other users.
I have tested the procedure below with installation of Windows Vista Ultimate (64bit) and Windows 7 Ultimate (64bit). I believe that the procedure will also work with the 32bit versions of these OSs. I am not totally convinced that this works when the OS to install is Windows XP (64bit or 32bit). XP has a completely different boot sequence compared to Vista or 7. The basic steps would remain the same, but the XP setup is less forgiving when it finds an unknown partition. If somebody wants to try it out, please post your results as a reply to this forum entry.
Never never never try to install an older OS (like Windows 2000 or NT) as a second OS when XP is already installed! This is doomed to fail.
The procedure below does NOT work for Linux installations. I am not a Linux wizard, but any Linux bootmanager I know about is incompatible with the Lenovo Service Partition.
The procedure was tested on a Thinkpad R61 model 8918-B9G. It should work similar on other models.
You definitely need a service partition with Rescue&Recovery version 4. It will NOT work with older versions of R&R or if the service partition is not a type12 partition (see below how to find out about that).
I assume that the harddisk partitions are unmodified, i.e. still have factory settings. This is likely the case if you
never attempted any OS install or recovery action. If this is not the case, the procedure may or may not work.
You also need a bootable CD with a tool that can change the size of your current system partition. I was using gparted live version 0.5.2-9. ( http://gparted.sourceforge.net/ )
Everything you do is at your own risk. I am in no way related to Lenovo, other than being a customer using their
products.
Step 1) Make a full backup of your harddisk. Get yourself recovery CDs for your Thinkpad model if you don't have any. The changes we are about to make can completely screw up your harddrive. A typo is sufficient for that to happen.
Step 2) Power on the system. Check that you can boot into the Service Partition by pressing the Thinkvantage button when the startup screen appears. (Older systems may have a differently named button.) If there is a problem booting the service partition now, it is likely that the rest of this procedure will not fix it.
Step 3) From the service partition choose 'Warmstart' to reboot the system. Reboot Windows XP, logon.
Open a command prompt. CD to the following directory:
\Program Files\Common Files\Lenovo\BMGR
On a german language system (like mine) it is
\Programme\Gemeinsame Dateien\Lenovo\BMGR
If you have an older IBM system the directory may be named
\Program Files\Common Files\IBM\BMGR
or something like that. Maybe you need to search around.
In the following, I will call this the "BMGR dir".
Enter the following command:
bmgr32 /info /v
You should get an output similar to this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
It's a Lenovo MBR
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? (512) Label is SERVICEV
Using version 2.05 of Lenovo Boot Manager
Reading: \\.\PHYSICALDRIVE0
MBR Sector 1 Index: 1 Checksum: 00 Disabled
MBR Sector 2 Index: 4 Checksum: 03 Passed
MBR Sector 3 Index: 5 Checksum: FD Passed
MBR Sector 4 Index: 6 Checksum: 58 Passed
MBR Sector 5 Index: 7 Checksum: 96 Passed
MBR Sector 6 Index: 8 Checksum: 7F Passed
Data Sector Index: 3 Checksum: F1 Passed
Original MBR Index: 2 Checksum: BD Passed
No Patch Sectors
Checksum Byte: 00
Think Flag: 1
WinPE Partition (0-3): 1 Alt Boot Partition (0-3): 1
Boot Config: 2 (Service Partition containing two Service OS's)
Boot State: 0 Alt Boot Flag: 0
(Normal booting operation, will boot to Customer OS)
RRU: 00000000 00000000 Prev Active Part: 255
Previous Partition Type: FF Patch IN: 0 OUT: 0
CIRT Disabled
TOC: 0000000000000000 Lock: 0
Show Error: 0 Halt on Error: 0
CIRT Load Return: 0
CIRT Execute Return: 0
Pause Duration: 10 Scan Code: 0085
F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
Check Msg: There has been a signature failure
# active type start CHS end CHS startLBA size
0 0x80 0x07 1 1 0 239 255 255 63 301296177
1 0x00 0x12 0 193 255 239 255 255 301296240 11279520
2 0x00 0x00 0 0 0 0 0 0 0 0
3 0x00 0x00 0 0 0 0 0 0 0 0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
The important thing to look for is the 0x12 partition type in the partition table at the bottom. This is the service
partition. If you do not have a 0x12 partition, then you can stop here because the rest of the procedure will not work
for you.
Step 4) Shutdown and boot gparted from CD. Shrink the system partition to the desired size. Do NOT touch the service partition! Do NOT attempt to create another partition! Leave the new white space on the disk untouched! Apply changes and restart the system.
Step 5) Reboot XP. gparted has set the NTFS dirty bit. This will cause XP to run a full CHKDSK. Depending on how much files there are on the partition this may take considerable time. Let CHKDSK run to completion. When CHKDSK finishes, the system will automatically reboot.
Step 6) XP reboots now. Logon. When loading the desktop, XP will show a popup window, stating that system settings have been changed and new devices been discovered and that the system should be rebooted. This is ok. XP actually recognized the shrunk system partition and applied the necessary changes to its own system parameters. Click YES to reboot the system.
Step 7) XP reboots. Logon. Open a command prompt, CD to the BMGR dir and enter:
bmgr32 /info /v
The output you get should be similar to the output you have seen in step 3, except that the partition 0 size column
shows a smaller value.
Step 8) Shutdown, restart. Check that you can still access the service partition by pressing the blue Thinkvantage button when the system startup screen appears.
Step 9) From the predesktop environment choose warmstart. Reboot XP. Logon, logoff, shutdown.
DO NOT SKIP THIS STEP!!! If you start the Windows Vista/7 install right after shutting down from the predesktop
environment, the Win Vista/7 setup program will screw up your harddisk! The Lenovo MBR bootmgr reboot takes two steps for completion. The first step is the shutdown and the second step is executed when booting from harddisk. A boot from the Windows CD will skip this second step and disaster finds its way...
Step 10) Insert the Windows Vista/7 DVD and boot it. Start the setup. Choose "Custom (advanced)" install. It will show the partitions on the disk. Select the white space (unallocated). Click on "disk options (advanced)". Click on "New" to create a new partition in the white space. Keep the default size, click "Apply". Click "Format". A popup window appears stating that the partition may hold OEM data. Continue. Click "Next". Installation starts.
Continued in the second post...Step 11) Win Vista/XP will reboot several times during installation. You will always see the Windows bootmanager with an entry for "Earlier Windows version" and "Windows Vista/7". DO NOT DARE to touch the blue Thinkvantage button on any reboot or press any function keys!
Step 12) When the installation is finished, check that you can successfully reboot Win Vista/7 by selecting it from the Windows bootmanager.
Step 13) Reboot XP by choosing "Earlier Windows version" from the Windows bootmanager. Open a command prompt. CD to the BMGR dir. Enter the following command:
bmgr32 /info /v
The output will now look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
Opened Master Boot Record to see whose MBR it is.
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
# active type start CHS end CHS startLBA size
0 0x80 0x07 1 1 0 254 255 255 63 109675692
1 0x00 0x07 239 255 255 239 255 255 109676544 191619072
2 0x00 0x12 239 255 255 239 255 255 301296240 11279520
3 0x00 0x00 0 0 0 0 0 0 0 0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
startLBA and size will of course differ, depending on the actual partition sizes you have set. Note that Windows setup moved the service partition to entry 2 of the partition table. If you do not see the 0x12 partition then stop here.
Otherwise the following step will likely screw up you harddisk.
Enter the following command (case sensitive?):
bmgr32 /Fbootmgr.bin /m0 /IBM /v
The output will look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /Fbootmgr.bin /m0 /IBM /v
installing MBR
finding free sectors
Sector 9 is free
Sector 10 is free
Sector 11 is free
Sector 12 is free
Sector 13 is free
Sector 14 is free
Sector 15 is free
Sector 16 is free
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
Setting Think bit
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
This command reinstalled the Lenovo bootmanager in the MBR that was erased by the Win Vista/7 setup program.
Enter the following command:
bmgr32 /info /v
The output will now look like this:
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>bmgr32 /info /v
It's a Lenovo MBR
Opened Master Boot Record to see whose MBR it is.
It's a Lenovo MBR
Opened drive for reading
Partition 0 the SP? no, type 0x07 is not correct
Partition 1 the SP? no, type 0x07 is not correct
Partition 2 the SP? (512) Label is SERVICEV
Using version 2.05 of Lenovo Boot Manager
Reading: \\.\PHYSICALDRIVE0
MBR Sector 1 Index: 1 Checksum: 00 Disabled
MBR Sector 2 Index: 11 Checksum: 03 Passed
MBR Sector 3 Index: 12 Checksum: FD Passed
MBR Sector 4 Index: 13 Checksum: 58 Passed
MBR Sector 5 Index: 14 Checksum: 96 Passed
MBR Sector 6 Index: 15 Checksum: 7F Passed
Data Sector Index: 10 Checksum: 01 Passed
Original MBR Index: 9 Checksum: 12 Passed
No Patch Sectors
Checksum Byte: 00
Think Flag: 1
WinPE Partition (0-3): 2 Alt Boot Partition (0-3): 2
Boot Config: 0 (Service Partition containing one Service OS)
Boot State: 0 Alt Boot Flag: 0
(Normal booting operation, will boot to Customer OS)
RRU: 00000000 00000000 Prev Active Part: 255
Previous Partition Type: FF Patch IN: 0 OUT: 0
CIRT Disabled
TOC: 0000000000000000 Lock: 0
Show Error: 0 Halt on Error: 0
CIRT Load Return: 0
CIRT Execute Return: 0
Pause Duration: 10 Scan Code: 0085
F11 Msg: To boot to the Rescue and Recovery Environment, Press F11
Check Msg: There has been a signature failure
# active type start CHS end CHS startLBA size
0 0x80 0x07 1 1 0 254 255 255 63 109675692
1 0x00 0x07 239 255 255 239 255 255 109676544 191619072
2 0x00 0x12 239 255 255 239 255 255 301296240 11279520
3 0x00 0x00 0 0 0 0 0 0 0 0
C:\Programme\Gemeinsame Dateien\Lenovo\BMGR>
So you have actually regained the Lenovo bootmanager. But you are not done yet.
Step 14) Shutdown. Restart the system. DO NOT PRESS THE BLUE THINKVANTAGE BUTTON AT THE SYSTEM STARTUP SCREEN!!! IT DOES NOT WORK YET! When the system startup screen DISAPPEARS, quickly press F11 (maybe several times). The system should now boot the predesktop environment from the service partition.
Step 15) When the predesktop is there, choose "warmstart". When the system startup screen appears, press the blue Thinkvantage button. The system should again boot into the predesktop. The blue Thinkvantage button now works permanently.
Step 16) Check that you can boot Win XP and Win Vista/7 from the Windows bootmanager. You're done! -
Topic says it all...
My friend started a installation of Windows Vista, but pulled out after deleting all partitions...
So now i power it on, get a blank screen (seems a bit gray because of backlighting, should show the apple logo right?)...
Then after like 15-20sec it will throw out a:
BOOTMGR is missing
Press Ctrl+Alt+Del to restart
I have a OEM Windows Vista DVD in the drive, and i know... Windows 7 is better... but i'm not that fond of stealing software from Microsoft and i have 10 licenses for Vista...
I have tried pressing C while booting up but it doesn't work...
Does anyone here have a magic soloution for me, and no i will not install MacOS on it !!!Deleting Boot Camp partitions the conventional way will not work . You must use the Boot Camp Assistant to remove a Boot Camp partition. Here is a link to the guide.
http://manuals.info.apple.com/en_US/Boot_Camp_Install-Setup_10.6.pdf
The way to restart is to hold down the option/alt key during startup* and then selecting the Mac OS. If you have a valid Boot Camp install of Windows it would show up during this type of start up.
* hold down immediately after pressing the power button and until the OS choice screen appears.
To summarize.
1 Use the above method to boot into Mac OS.
2 Download the instructions and read them.
3 Use Boot Camp Assistant to remove the partition.
4 Pick your friends more carefully. -
Troubleshoot installation problems in Photoshop Lightroom on Windows Vista
This document can help you to resolve system errors that occur while you use Adobe Photoshop Lightroom on Windows Vista. System errors can manifest in many different ways, including (but not limited to) the following:
A blank or flickering dialog box
A frozen cursor or screen
A blue screen
An unexpected restart
An error message such as:
"Setup is unable to load the installation script file."
"Unable to create a directory under C:\Windows\System. Please check write-access to the directory."
"Uninstalling: C:\Program Files\Adobe\Adobe Photoshop Lightroom refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location."
Note: If you attempt to install Photoshop Lightroom to a drive that doesn't have the minimum required space available, the installation will fail. You must then completely reinstall to another location that has sufficient free space.
Many different factors can cause system errors, including conflicts among device drivers, applications, operating system settings, hardware, and corrupt elements in specific files. Although a system error may occur only when you work with Photoshop Lightroom, Photoshop Lightroom may not necessarily be the cause; it may be the only application that uses enough memory or processor cycles to expose the problem.
To benefit most from this document, perform the tasks in order. Keep track of the tasks that you perform and the results of each, including errors and other problems. Adobe Technical Support can use this information to better assist you if you need to call.
You must be logged on as an administrator to perform some of the procedures in this document.
Important: Some of the procedures in this document may initiate a User Access Control dialog that asks for your permission to continue. Read the details in the dialog to determine if you want to continue. If you choose to cancel the dialog, then you will not be able to continue with that troubleshooting step.
The steps in this document that refer to the Control Panel are in reference to the Classic view. For information on switching the Control Panel to the Classic view and many other common OS procedures, see Common Microsoft Windows Vista procedures (TechNote kb401275)
Some of these procedures require you to locate hidden files and hidden folders. Some procedures require you to locate files by their full file names, which include extensions (for example, example_filename.ini). By default, Windows Explorer doesn't show hidden files, hidden folders, and file name extensions that it recognizes.
To show hidden files, hidden folders, and all file name extensions in Windows Explorer:
In Windows Explorer, choose Organize > Folder And Search Options.
Click the View tab in the Folder Options dialog box.
In Advanced Settings, select Show Hidden Files And Folders.
Deselect Hide Extensions For Known File Types.
Click OK.
Note: The procedures in this document are based on the default interface of Windows Vista. If the interface is customized, some procedures may vary. For example, a commonly encountered difference is the navigation to Control Panel from the Start menu: You may navigate Start > Settings > Control Panel instead of Start > Control Panel. Additionally, the procedures in this document assume you are using the Classic View of the Control Panel: To view the Control Panel in the Classic View, click Switch To Classic View on the Control Panel navigation bar on the left side of the window.
Beginning troubleshooting
The tasks in this section can help you resolve the most common system errors. Before performing any of these tasks, back up all personal files (for example, Photoshop Lightroom files you created). Always restart the computer after a system error occurs to refresh system memory. Continuing to work without restarting the computer may compound the problem.
1.Make sure that the system meets the minimum requirements for PhotoshopLightroom.
Photoshop Lightroom may not run correctly on a system that doesn't meet the following requirements:
Intel Pentium 4 or equivalent processor
Microsoft Windows XP, Windows Vista, Windows 7
768 MB of RAM (1 GB recommended)
1 GB of available hard-disk space
CD-ROM drive
In addition to these requirements, a video card that supports 24-bit (16 million) or more colors, and a resolution of 1024 x 768 or higher, is recommended.
* Photoshop Lightroom 1.0 will install and run on Windows Vista but Adobe cannot guarantee the quality of the software experience until Adobe fully certifies Photoshop Lightroom for use on Windows Vista.
To check basic system information, such as processor speed and how much RAM is installed, choose Start > Control Panel > System.
2. Delete previously installed application files, especially if you had the public beta version of Photoshop Lightroom installed.
To delete files from a previous Adobe Photoshop Lightroom installation attempt:
Choose Start > Control Panels > Add or Remove Programs.
Select Adobe Photoshop Lightroom and choose to remove it.
Close the Add Or Remove Programs window and the Control Panel.
Open Windows Explorer.
If the Lightroom.exe file is still in the Program Files\Adobe\Adobe Photoshop Lightroom folder, delete it.
If the Lightroom Preferences.agprefs file is still in the Documents and Settings/[username]/Application Data/Adobe/Lightroom/Preferences folder, delete it.
Empty the Recycle Bin.
Try to reinstall. If you cannot, continue with the next two sections in this step:
Move all the folders under the Users/[username]/AppData/Roaming/Adobe/Lightroom folder into a new folder on the desktop; name the folder Lightroom Presets. These are the presets that were installed with the application and that you created.
Move all the folders under the Users/[username]/Pictures/Lightroom/Lightroom Previews.lrdata folder into a new folder on the desktop; name the folder Lightroom Previews. If you have a large number of images, you can move this folder back to its original location before you open Photoshop Lightroom, once it's installed. Or you can delete this folders to re-create it when Photoshop Lightroom opens. If there are further problems with Photoshop Lightroom after it's installed, it might be due to corruption in the previews, in which case you need to delete this folder and re-create it.
Try to reinstall.Important: Do not delete the Lightroom Database.lrdb file!
If there are further problems with Photoshop Lightroom after it's installed, these issues may be due to corruption in the preset files you created, in which case you need to remove them and re-create them, or test each preset individually.
Note: If you can reinstall, and if this is not the first time you opened Photoshop Lightroom, then Photoshop Lightroom will look for a library database file. If it does not find a library in the expected location, it will prompt you to create a new library, locate the library, or exit. Exit will close the dialog box, and Photoshop Lightroom will not open. Although you can tell Photoshop Lightroom to locate your library, it's best to put it back in the default location and then open the application.
If you can reinstall, close Photoshop Lightroom and then copy any presets you created from the Lightroom presets on the desktop back into the Users/[username]/AppData/Roaming/Adobe/Lightroom folder.
If you cannot reinstall, then move the Lightroom Database.lrdb file from the Users/[username]/Pictures/Lightroom folder into a new folder called Lightroom Database File and save this file on the desktop. This is your database, if you previously had Photoshop Lightroom installed.
Reinstall Photoshop Lightroom. If you cannot reinstall, continue with the next task in this document.
3. Log in as Administrator before installingPhotoshopLightroom.
In Windows Vista, you must be logged in with local (that is, machine) Administrator rights to install Photoshop Lightroom. If you don't have administrator rights, contact your system administrator for assistance.
4. Check the CD and CD-ROM drive.
Dust or dirt on a CD can interfere with an installation and prevent the CD-ROM drive from recognizing the CD. Examine the Photoshop Lightroom CD for dirt, dust, or fingerprints. Gently wipe the bottom of the CD from the center outward with a soft, lint-free cloth.
Verify that the CD-ROM drive can read other CDs. If it can't, examine the CD caddy or loading tray for dirt, and clean it with a lint-free cloth. If it still can't read other CDs, contact the CD-ROM drive manufacturer or the computer manufacturer.
5. Install current Windows service packs and other updates.
Updates to the Windows operating system improve its performance and compatibility with applications. You can obtain Windows service packs and other updates from the Microsoft website at www.windowsupdate.com. For assistance installing service packs and other updates, contact Microsoft technical support.
Important: Before you install a system update, check the system requirements for Photoshop Lightroom (and any third-party software or hardware you may use with Photoshop Lightroom ) to ensure compatibility. If the update isn't listed, then contact Adobe or the manufacturer of your third-party software or hardware.
6. InstallPhotoshopLightroomfrom the desktop and use the default installation folder.
Some system components such as device drivers and virus protection utilities can conflict with the Photoshop Lightroom installer and result in an incomplete or failed installation, or they can cause problems when you install to a folder or when you use a path to the default installation folder that contains a special character, such as #. To prevent these conflicts, install Photoshop Lightroom from the desktop, and use the default folder name and path.
If Photoshop Lightroom autoplay displays, click Cancel when you are requested to Select the Language.
Copy the Adobe Photoshop Lightroom folder from the Photoshop Lightroom CD-ROM to the desktop.
Open the Adobe Photoshop Lightroom folder on the desktop.
Double-click the Adobe Photoshop Lightroom.msi file, and follow the on-screen instructions.
7.Re-create thePhotoshopLightroompreferences file.
Re-create the Photoshop Lightroom preferences file to eliminate problems that a damaged preferences file might cause:
Quit Photoshop Lightroom.
Rename the Lightroom Preferences.agprefs file (for example, to Lightroom Preferences.old) in the Users/[username]/AppData/Roaming/Adobe/Lightroom/Preferences folder.
Start Photoshop Lightroom. Photoshop Lightroom creates a new preferences file.
If the problem continues, the preferences file isn't the cause. To restore custom settings, delete the new preferences file and restore the original name of the previous preferences file.
8.Install and run Photoshop Lightroom while no other applications are running.
Some applications may interfere with installing or running Photoshop Lightroom. Virus protection programs are meant to stop viruses from installing on your computer. Before installing or starting Photoshop Lightroom, disable other applications, including virus protection programs and startup items (items that start automatically with Windows).
To disable startup items and non Microsoft services:
Quit all applications.
Choose Start, type msconfig in the Search text box, and press Enter.
Write down all unselected items under the Startup and Services tabs.
Click the General tab, and choose Selective Startup.
Click the Startup tab and select Disable All.
Click the Services tab and select Hide All Microsoft Services.
Select Disable All then re-select FLEXnet Licensing Service. If you are unsure whether an item is essential, then leave it deselected (disabled).
Click Apply, and restart Windows for the changes to take effect.
Note: Upon restart, you'll be notified that the System Configuration utility has made changes to the way that Windows starts up. Click OK. When the System Configuration utility appears, click Cancel.
Right-click icons in the Notification Area and close or disable any startup items that are still active.
9. Install Photoshop Lightroom to a different hard disk after disabling startup items and installing from the hard disk.
Hard disk problems can prevent Photoshop Lightroom from installing correctly. By installing Photoshop Lightroom to a different physical hard disk, you can verify if the original hard disk is preventing installation. First, completely remove Photoshop Lightroom from the hard disk.
To install Photoshop Lightroom to a different hard disk after disabling startup items:
Follow the steps in task 8 above to disable startup items.
If Photoshop Lightroom autoplay displays, click Cancel when you are requested to Select the Language.
Copy the Adobe Photoshop Lightroom folder from the Photoshop Lightroom CD-ROM to the desktop.
Open the Adobe Photoshop Lightroom folder on the desktop.
Double-click the Adobe Photoshop Lightroom.msi file, and follow the on-screen instructions.
Click Change and select a different hard disk in the Change Current Destination Folder window. Click OK, and then follow the on-screen instructions.
Intermediate troubleshooting
If the tasks in the previous section don't solve the problem, try the following intermediate troubleshooting tasks.
10. Install and run Photoshop Lightroom in a new user account.
Create a new user account that has the same permissions as the account that you use when the problem occurs. If the problem doesn't recur, the original user account may be damaged. For instructions on creating a new user account, see To add a new user to the computer in Windows Help or contact your system administrator.
11. Optimize handling of temporary files by Windows Vista.
Windows and applications store working data in temporary (.tmp) files that they create on the hard disk. Excessive or outdated temporary files can interfere with performance of Windows or applications.
Delete temporary files by using the Disk Cleanup utility included with Windows or by using the following instructions. Make sure that at least 1 GB of free space is available on the hard disk to which temporary files are written. To start Disk Cleanup, choose Start > All Programs > Accessories > System Tools > Disk Cleanup. For information about Disk Cleanup, see Windows Help.
To manually delete temporary files:
Note: Windows deletes temporary files when Windows and applications close normally. However, when Windows or an application crashes, temporary files can accumulate on the hard disk. Windows may prevent you from deleting some temporary files as they may be in use. Delete as many temporary files as you possibly can, without deleting the files that are in use.
Quit all applications.
Choose Start and type %tmp% in the Search text box and press Enter.
Delete the contents of this folder.
Note the drive letter where this directory is located.
To ensure that at least 1 GB of free space is available on the hard disk to which temporary files are written:
Choose Start > My Computer.
Select the drive noted in step 4. Right click and select Properties.
Confirm the drive has at least 1 GB of free space.
12. Repair and defragment hard disks.
System errors can occur if hard disks contain damaged sectors or fragmented files. Repair and defragment hard disks, either by using the Error-checking tool and Disk Defragmenter utility included with Windows or by using a third-party disk utility. You should run such utilities on each hard disk or partition. More information about the Error-checking tool and Disk Defragmenter appears below; for more information about a third-party disk utility, refer to the documentation for the utility.
The Error-checking tool repairs bad sectors, lost allocation units and file fragments, cross-linked files, and invalid file names. To access the Error-checking tool, choose Start > Computer, right-click the desired hard disk, and choose Properties from the menu. In the Local Disk Properties dialog box, click the Tools tab, and then click Check Now in the Error-checking area.
Note: To prevent Disk Defragmenter from moving files to bad sectors of a disk, run the Error-checking tool before running Disk Defragmenter.
Disk Defragmenter rearranges the files and free space on your computer so that files are stored in contiguous units and free space is consolidated in one contiguous block. To access the Disk Defragmenter utility, choose Start > All Programs > Accessories > System Tools > Disk Defragmenter.
13. Scan the system for viruses.
Use current anti-virus software to check the system for viruses. Virus infections can damage software and cause system errors. For more information, see the documentation for the anti-virus software.
14. Try to install Photoshop Lightroomon a different computer.
Try to install Photoshop Lightroom on a different computer to determine if the problem is unique to your computer. If the problem is unique to your computer, contact the computer manufacturer; if the problem occurs on multiple computers, contact Adobe Technical Support.
Advanced Troubleshooting
If the tasks in the previous section don't resolve the problem, you may be able to resolve the problem by reinstalling Windows Vista and Photoshop Lightroom, reformatting your hard disk and reinstalling Windows Vista and Photoshop Lightroom, or by determining if hardware is conflicting with Photoshop Lightroom.
Disclaimer: Adobe doesn't support hardware and provides these procedures as a courtesy only. For further assistance, contact the hardware manufacturer or an authorized reseller. If you troubleshoot hardware problems yourself, you may void the warranty for your computer.
Note: Before you remove or rearrange hardware, turn off and disconnect power to the computer and any peripheral devices.
15. Log in using the built-in Administrator account.
The built-in Administrator account has a higher access level to the system than a normal local administrator account. By default the built-in Administrator account is disabled. For information about enabling and logging in to the built-in Administrator account, contact your system administrator. You can also refer to this support document on the Microsoft support website: http://support.microsoft.com/kb/926183/en-us?spid=11737&sid=73.
16. Reformat the hard disk, and reinstall only Windows Vista and Photoshop Lightroom.
Reformat the hard disk, and then install only Windows Vista and Photoshop Lightroom from the original installation media. Reformatting a disk erases all files it contains, so be sure to back up all personal files first. Also make sure that you have all application and system disks.
For instructions on performing a clean installation of Windows Vista, see document 918884, "How to install Windows Vista" on the Microsoft website at http://support.microsoft.com.
Note: Don't install additional software or hardware until you're sure that the problem is resolved. Don't back up the hard disk and restore Windows and Photoshop Lightroom instead of reinstalling them. If the problem is caused by an application or Windows, and either one is restored instead of reinstalled, the problem may recur.
After you reformat the hard disk and reinstall Windows and Photoshop Lightroom, try to re-create the problem:
If the problem no longer occurs, then install other applications one at a time and try to re-create the problem after each installation. If the problem occurs after an installation, then the recently installed application may be the cause.
If the problem occurs when only Windows and Photoshop Lightroom are installed, then the cause may be hardware-related, and you should contact the hardware manufacturer or an authorized reseller for assistance.
17. Check for problems with RAM modules.
Ensure that the RAM modules are installed properly and are not the cause of your problem. Do one or both of the following:
Change the order of the installed modules.
Remove all but the minimum number of modules needed to run Windows and [product], and test to see if the problem persists. If it does, replace the modules you removed and remove the others, testing again to see if the problem recurs. If it doesn't, then one or more of the removed modules are the cause. For assistance, contact the RAM manufacturer.You've tried Help>Updates from within photoshop cs6?
Or this 8.3 updater
http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw7-7.0/8.3.52/setup.zip
If that doesn't work, you can install camera raw 8.3 by following the directions on the following page
Adobe Camera Raw Help | Camera Raw/DNG Converter 8.4 on Mac OS 10.6, Windows XP, and Vista -
Qosmio G20 Vista drivers? Not needed to install Windows Vista
Hello,
I am new at this forum. My name is Francisco and I live in Brazil. I own a Toshiba Qosmio g20_105 and it is running Windows Vista Ultimate EN RTM 6000 without problems.
To do this, you must perform a fresh install of Windows Vista. The drivers for network (Intel PRO100),for audio (Soundmax), for TV (Toshiba PCI Tuner), modem (toshiba modem), Alps pointing device are installed directly from microsoft. You must install Toshiba nvidia display driver, Toshiba Bluetooth (monitor and stack), Toshiba texas flash media driver, toshiba RAID (driver and utilities), toshiba remote control manager and ConfigFree for Windows Vista.
You must have the Toshiba RAID drivers to install from the windows Vista DVD. Otherway, Windows does not recognize Toshiba RAID 0 and RAID 1.
Below some pictures of my G20 Desktop screen:
http://www.rabayjr.com/vista/myqosmiog20screen1.jpg
http://www.rabayjr.com/vista/myqosmiog20screen2.jpg
http://www.rabayjr.com/vista/myqosmiog20screen3.jpg
And here is an example of using deskscapes animated backgrounds with Windows Vista, called dreamscene.
It is in paused mode
http://www.rabayjr.com/vista/myqosmiog20screen4.jpg
To perform a fresh install of windows Vista:
Please, download the Toshiba RAID drivers from here:
http://www.rabayjr.com/vista/drivers/raid.rar
1. Copy the contents of this archive onto a floppy disk, CD, DVD, or USB flash drive.
2. Insert your Microsoft Windows Vista Edition Bootable DVD.
3. Power on your computer and press F12 to display the boot menu.
4. Choose the option to boot from the CD/DVD drive.
5. On the first setup screen, choose your language options then press "Next".
6. Press "Install Now".
7. Type in your Product Key then press "Next".
8. Accept the license terms by checking the box then press "Next".
9. When asked "What type of installation do you want", press "Custom (advanced)".
10. When asked "Where do you want to install Windows", make sure your media containing the Toshiba RAID drivers is connected to the computer, then click on "Load Driver".
11. Browse to the location you have copied the RAID drivers to then press "OK".
12. Setup will return to the previous screen, but it will show that you have selected the TOSHIBA RAID driver.
13. Make sure the TOSHIBA RAID driver is selected then press "Next".
14. Continue the installation of Windows Vista as normal.
Now you will need the Toshiba drivers for your Qosmio G20:
See the Device manager info:
http://www.rabayjr.com/vista/qosmiodrivers1.jpg
Drivers:
1. SD memory controller
http://www.rabayjr.com/vista/drivers/SD_memory.rar
2. Bluetooth monitor and stack
http://www.rabayjr.com/vista/drivers/bluetooth_mon.rar
http://www.rabayjr.com/vista/drivers/bluetooth_stack.rar
3. Nvidia display driver GeForce Go 6600
http://www.rabayjr.com/vista/drivers/nvidia97.52.rar
4. Texas FlashMedia controller
http://www.rabayjr.com/vista/drivers/flasmedia.rar
And finally the Toshiba utilities:
Toshiba Configfree
Toshiba Assist
RAID utilities
Remote control manager
Toshiba SD Memory utilities
That's it...
So I must tell to you that Toshiba Qosmio G20 is Windows Vista Ultimate capable, indeed.
Hope this helps people who need and want to install Windows Vista Aero on their Qosmio G20 machines.
Message was edited by: FranciscoJrUPDATED POST: On March 08, 2007
This is a step by step guide for those of you with problems to get Windows Vista functional on your G20 Qosmios
Use a Windows Vista English Version RTM Ultimate 6000 DVD for installation.
1 Backup your personal files and important data to a removable device, CD, DVD, flashmedia, pendrive, etc...
2.Check your Qosmio player installation. if nedeed, reinstall it with the latest version (multilanguage), posted on Toshibas site (download drivers section).
3.Download and copy the Toshiba RAID drivers to a removable media
Please, download the Toshiba RAID drivers from here:
http://www.rabayjr.com/vista/drivers/raid.rar
4.To perform a fresh install of Windows Vista, Follow the steps below
-1. Copy the contents of this archive onto a floppy disk, CD, DVD, or USB flash drive.
-2. Insert your Microsoft Windows Vista Edition Bootable DVD.
-3. Power on your computer and press F12 to display the boot menu.
-4. Choose the option to boot from the CD/DVD drive.
-5. On the first setup screen, choose your language options then press "Next".
-6. Press "Install Now".
-7. Type in your Product Key then press "Next".
-8. Accept the license terms by checking the box then press "Next".
-9. When asked "What type of installation do you want", press "Custom (advanced)".
-10. When asked "Where do you want to install Windows", make sure your media containing the Toshiba RAID drivers is connected to the computer, then click on "Load Driver".
-11. Browse to the location you have copied the RAID drivers to then press "OK".
-12. Setup will return to the previous screen, but it will show that you have selected the TOSHIBA RAID driver.
-13. Make sure the TOSHIBA RAID driver is selected then press "Next".
-14. Continue the installation of Windows Vista as normal.
5. Go to Microsoft update and download all important updates available. If you wish you can install your native language, if other than English, from the Microsoft site.
let Windows install all the drivers found for your Qosmio G20.
6. Reboot your machine and follow with the steps below.
DRIVERS YOU MUST INSTALL:
1. Alps pointing device driver (This is from Alps and working fine with your Qosmio G20)
http://www.rabayjr.com/vista/drivers/alpsdriver.rar
http://www.rabayjr.com/vista/qosmioalps.jpg
During the installation, Windows will complain that you are installing an early device driver. Do not attempt to this, Install it anyway.
This is because the Windows driver for this device is originally installed with a more recent date and version from that you are trying to install.
But the driver posting here is the correct from the Alps for your Qosmio g20.
2. Bluetooth monitor and stack
http://www.rabayjr.com/vista/drivers/bluetooth_mon.rar
http://www.rabayjr.com/vista/drivers/bluetooth_stack.rar
3. Nvidia display driver GeForce Go 6600
http://www.rabayjr.com/vista/drivers/nvidia97.52.rar
To install the nvidia 97.52, you must do it manually:
open the Device manager
look for the Video adapter/nvidia Gforce go6600
Driver update options
Look for a driver in computer
Choose a list of device drivers in computer
With disc...
Lool for the place you've extracted the nvidia 97.52.rar
Find the nvts.inf and open it
You will come to the following screen:
http://www.rabayjr.com/vista/qosmionvidiainstall.jpg
From a list choose your video card (go6600) and install it.
If you think it is difficult, please see the VIDEO Nvidiainstall.avi:
http://www.rabayjr.com/vista/drivers/nvidiainstall.rar
After the extraction, play it with Windows media Player
4. Texas FlashMedia controller
http://www.rabayjr.com/vista/drivers/flasmedia.rar
5.SoundMAX integrated digital audio. Driver 5.12.1.5410
http://www.rabayjr.com/vista/drivers/soundmax5.12.1.5410.rar
run the setup.exe and at first remove the driver you have installed on your Qosmio G20.
reboot the computer
Run the setup.exe again and install the new driver. At some install point, Windows Vista will need a confirmation, if you trust Analog devices incorporated to goes on..
http://www.rabayjr.com/vista/qosmiosoundmaxinstall.jpg
Continue with the installation and after finishing the process, test the functionallity of the new driver
OR
If your G20 model is using the Sigmatel HD audio chipset, so you must install other driver than the Soundmax integrated digital audio
It is the SigmaTel HD Audio Driver for Windows Vista Version: 6.10.0.5324
link:
http://www.rabayjr.com/vista/drivers/sigmatelhd.rar
6.Intel PRO Wireless 2200BG Vista version 9.1.0.115, including the Intel chipset identification utility.
http://www.rabayjr.com/vista/drivers/intel_wireless.rar
And for the Utilities you can download them from here:
1.Toshiba Configfree
http://www.rabayjr.com/vista/drivers/configFree.rar
2.Toshiba assist
http://www.rabayjr.com/vista/drivers/assist.rar
3.Raid utilities
http://www.rabayjr.com/vista/drivers/raidutil.rar
4.Remote control manager
http://www.rabayjr.com/vista/drivers/rcm.rar
5.Toshiba disk creator.
http://www.rabayjr.com/vista/drivers/disccreator.rar
6.Picture enhancement utilily.
http://www.rabayjr.com/vista/drivers/picenhan.rar
You can select your desired screen brightness and the monitor input settings:
monitor-in (rca normal or S-VHS plug in) when using your Qosmio as a monitor in for your VCR, DVD, Playstation, etc.
For using TV as monitor-in you also can switch from NTSC to PAL video system.
For screen brightness: This adjust affects the image of your DVD player software or when watching your DVD via media Center 2005
http://www.rabayjr.com/vista/qosmiopicenh.jpg
After installation this utility appears into the Toshiba Assist Window, on Optimize category as shown in the picture above.
As the Toshiba Media (Top) buttons are not working by now, you can use the HotKey (Fn+4) which is working 100% , to toggle from Normal screen input(4:3 aspect)
to wide screen input (16:9 aspect).
Press the Fn+4 once and your monitor video in is 4:3 mode, press again and the monitor video in is 16:9 mode, press once more and the image returns to your lcd normal. screen.
7. SRS Audio Sandbox utility (enhancement) for you soundmax audio experience
The sandbox will allow you to process any audio in your system with one of three SRS technologies:
WOW HD: Provides enhanced width, bass and definition for music sources.
TruSurround XT: Virtualizes multichannel content for listening on two speakers,
with post-processing enhancements.
CX Xtract: Provides enhanced multichannel virtualization by combining TruSurround XT
with Circle Surround II.
link to download:
http://www.rabayjr.com/vista/drivers/srs.rar
8.Toshiba value added package:
About the Toshiba Value added package for the G30, you can install it on the G20, but only some of the items, otherwise you will have conflicts with Windows mobility center.
Do not install the Toshiba energy control. Designed only for the G30 model.
It Maintains the Windows mobility center funcionality and the Toshiba Buttons (FN + F1, F2, F3, etc...)will be OK.
9.Toshiba extended Tiles for Windows mobility Center.
http://www.rabayjr.com/vista/drivers/tileswmc.rar
10.Microsoft photo info.
http://www.rabayjr.com/vista/drivers/photoinfo.rar
OBS: All the downloads are directly from my FTP server. 100% secure. No Virus. No spywares
Francisco -
Crystal Report XI R2 and Windows Vista
Hi to all,
I'm working on an application written in Visual C++ 6.0 that print reports using the Crystal Report XI R2 SP4 engine.
One of my report contain a dynamic image: is a OLE object dynamically linked inside the report.
My application generate a new image and after that the report is printed.
Everything works well on Windows 2000 and Windows XP but with Windows Vista the image is stored inside the Virtual Store folder under my user profile and the reports seems to be unable to find/load the modified image.
So the report is printed with the image that is present in the standard software installation folder (under c:\Program Files\....)
Anyone have an idea how to solve this problem?
Thanks in advance,
EnricoHi Enrico,
Can you let us know what is the format of the image you are using.
Thanks,
Naveen.
Maybe you are looking for
-
Inbound Vendor Invoices - External Partner Number Conversion
Hi Folks, Plz tell me how the external vendor numbers will be converted into internal SAP Vendors. Is there a table/transaction code we should maintain? Thanks, Matt
-
Using truncate table in stored procedure
Hello I am trying to truncate and repopulate a table in a procedure. I have found that this appears to be impossible. Surely there is some way around this!! Can anyone help me overcome this problem? Dean null
-
Validating the Business Rule Essbase Error(1200315):
When i Execute the BR FIX([v_Year],[v_Scenario],"Working", "USD","EUR", "HSP_InputValue",@LEVMBRS("Datasource", 0)) /* @ANCESTORS ("Products"); @IDESCENDANTS ("Entities");*/ AGG ("Products","Entities"); ENDFIX; It is Successful. But when i Change the
-
the safari software will not display images (pictures). I have done the "reset" but still no help. What should i try next?
-
Issue with selecting or copying a phone no. in dialing or direct calling from websites
Dear All, I remarked that in Z10 I cannot use in dialing screen neither copy/paste phone numbers nor calling direct from email or websites by selecting the phone no. and taping on it. This seems to be a bit annoying when you try to make a call from