How to start the datasocket in VC++ ?

How to start the data socket in VC++? In my application, i need to link to pc , so in order for me to start running the data socket, is it mean this two pc have to install with measurement studio software? after that, how can i code the server side so that the server pc can get the text file from client's pc?

Hi,
The DataSocket server is an executable, so you can just lunch it as any other executable. You can use the system commmand or any other way.
Once the server is running you can just use the connect method to start up the communication. You don't need measurement studio in the client machine, all you need is to create create an installer that includes the DataSocket component as any other MStudio controls.
Hope that helps.
Regards,
Juan Carlos
N.I.

Similar Messages

How to start the netweaver portal to publish the reports

Hi gurus,
could any one body tell me how to start the netweaver portal, I am in the SAP management console screen.
I need to publish the SAP 3.5 query reports in to netweaver portal
PLease help me

Logon the portal as system admin
Create a SAP system, connect to the BW
then create a BW 3.x query iview in the Portal Content studio.

How to start the IR part in XI

Hi All,
How to Start the Design part in XI while Converting the PDF file into Text file using Module Processor?
Pls let me know.......
Regards,
Govindu.

Govind,
If you want some changes to be done to the file like mapping etc then you need to have the IR setting done too.
But if you are going to use XI as an FTP service you need no configuration on the IR except creating the Datatype , message type and message Interfaces .
Take a look at this blog,
<a href="/people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp">XI in the role of FTP</a>
Regards,
Bhavesh

TS1538 How to starting the '' Apple mobile device '' on my iphone to connect on itunes?

How to starting the '' Apple mobile device '' on my iphone to connect on itunes?

Refer here:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/TS1567

How to start the Oracle 8i client in redhat 7.2?

I have installed properly oracle 81 client and server properly.
I wanna access anothe linux server. But I don't know how to
start the clent ?..And what are should be done to access the
remote oracle server?
Thanks

apusumit wrote:
please provide me details steps of start/stop oracle 9i database . we have four nodes .So i would like to know the steps of shutting down database including all nodes & also starting up and any prerequisite?
Edited by: apusumit on Jun 10, 2011 5:32 AMrefer the link:-
http://www.puschitz.com/InstallingOracle9iRAC.shtml#StartingAndStoppingOracle9iClusterManager
also,
please post the question in
Forum Home » Grid Computing » Real Application Clusters
Good Luck.

How to start the Message Server?

Hi,
I wish to start the J2EE engine and for the same it is mandatory to start the Message Server first.
In order to start the message server, I run the following command:
D:\usr\sap\J2E\SYS\exe\uc\NTI386>msg_server start
msg_server=>sapparam(1c): No Profile used.
msg_server=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
[Thr 7972] Wed Jul 25 23:39:18 2007
[Thr 7972] *** ERROR => MsSetWorkDir: chdir D:\usr\sap
D00\work [msntserv.c 170]
[Thr 7972] *** ERROR => MsSPrvInit: MsSetWorkDir [msntserv.c 87]
[Thr 7972] *** ERROR => mainU: MsSPrvInit [msxxserv.c 1634]
I gave my best time to search for Profile configuration details. But I could not do that.
Can somebody tell me how to start the Message Server?
regards,
Anand

Hi Anand,
Will be good to know what OS are you using...
If you're tryng to start an instance use <prompt>: startsap pf=<profile of the system you want to start>
If you logon as <sid>adm just type startsap
If for some reason you need to start only the message server try <prompt>: msg_server start pf=<profile of the system you want to start>
Regards
Juan
Please reward with points if helpful

How to start the server. Urgent.

I mistakenly deleted the icon from the Start menu, to start the SAP IDES server in my laptop. How to start the server from any other path.
I installed it in E drive (2003 server). Database path is F drive.

Hi,
Check the following path
E:\Program Files\SAP\FrontEnd\SapGui
Here the actual Logon Pad file would be stored with name "SAPLOGON" or "SAPLGPAD".
Create another shortcut for above file on your desktop.
Best regards,
Prashant

How to start the oc4j server

I install oracle 9ias 9.0.3,but i don't know how to start the oc4j server.
thanks for any help?

hi
Refer "Starting and Stopping OC4J" from
http://otn.oracle.com/tech/java/oc4j/doc_library/902/A95880_01/html/toc.htm
hope this helps.
shrini

How can start the free trial of adobe captivate 8

how can start the free trial of adobe captivate 8

Hello,
Welcome to Adobe Forums !
You may simply download using the link below
https://www.adobe.com/cfusion/tdrc/index.cfm?product=captivate
If you need any help while doing this you may Contact Customer Care .
Thanks
Himanshu

How to start the process.

I'm using CE 7.3 for BPM.
I would like to start process from simple menu not using Process Repository.
Does anyone know hot to start BPM process form menu ?
Do I have to develop webDynro applicatin that calls web-services for staring the process ?
Best regards,
Koji Nagai

Thank you for your reply.
I understand how to start BPM process by using BPM API.
But in my project, we need to minimize the developed objects.
To use BPM API means to develope programs right ?
If possible, I would to start BPM process without developing programs.
Is there any way to start BPM process from menu without add-on programs.
Best regards,
Koji Nagai

How to start the ServiceRegistery and AccessManager

I have downloaded the Java Identity Management Suite.(java_es-5-identsuite-ga-windows-x86.zip) I used a Configure Now installation on my WindowsXP. Everything went fine and after installation I was able to go to
http://localhost:6480/soar/index.jsp
and
http://localhost:8080/amserver/UI/Login
when going to AccessManager Console what is the login username/password as I am unable to log-in
Then I restarted the box but after that I am not able to go to these pages it says page not found
I tried the following but gives errors. How do I start ServiceRegistery and AccessManager
C:\Sun\JavaES5\identity\bin>amserver stop
System error 1060 has occurred.
The specified service does not exist as an installed service.
C:\Sun\JavaES5\identity\bin>amserver start
The service name is invalid.
More help is available by typing NET HELPMSG 2185.
The service name is invalid.
More help is available by typing NET HELPMSG 2185.Any help is appreciated.
Thanks

KM will install with portal itself
after logging into portal goto -- content admin -- km content
and for collobration follow below steps to activate
Content Administration ® Portal Content ® Portal Users ® Standard Portal Users ® Default Framework Page
Double-click Default Framework Page.
Select the Tool Area iView checkbox.
Choose Open. The Property Editor page displays.
Choose Show All in the Property Category drop list menu.
Choose Enable Collaboration Lauch Pad properties.
Select Yes radio button.
Choose Save
Choose Close.
Choose F5 to refresh your portal screen.
now u can see collabaration link in tool area.
Regards
Krishna.

How to start the emulator from eclipse

Hello everybody, i've just installed Java_ME_platform_SDK_3.0 on my XP machine and i use eclipse helios with the eclipseme plugin for developing midlets. now, when i start a simple midlet with the emulator for my nokia device (S60_3rd_FP2_SDK_v1.1) the nokia emulator comes up and start the midlet. but when i choose the Java_ME_platform_SDK_3.0 as emulator i got the following output:
-Xdebug Use a remote debugger
-Xrunjdwp:[transport=<transport>,address=<address>,server=<y/n>
suspend=<y/n>]
Debugging options
-Xdevice:<device> Select a device skin for the emulator
-Xdomain:<domain_name>
Set the MIDlet suite's security domain
-Xquery Print device information
-Xjam[:install=<JAD file url> | force | list | storageNames |
run=[<storage name> | <storage number>] |
remove=[<storage name> | <storage number> | all]]
Java Application Manager and support
for Over The Air provisioning (OTA)
-Xautotest:<JAD file url>
Run in autotest mode
-Xdescriptor:<JAD file name>
The JAD file to be executed
any ideas how i can start the emulator directly from inside eclipse?

Thank you Diane and Lynn.
Diane what you said would be the obvious choice if i was using motor angles to calculate the distance i have to run. I am using Motor run block sets. that make the robot move a specific distance. then a combination of different blocks completes the square trajectory. I am refering to the NXT motor blocksets. so there are two states. the swerve around routine is working fine. However in the search mode. i have lets say three blocks. one makes the robot go 1.5 meter straight. then another block steers it. then it again moves 1.5 meter. Now when my mine is in between these 1.5 meter runs. i want it to start from the same point where it swtiched states. and then move onto the next two block. or atleast move to the next two blocks rather than start from beginning. i was wondering if there is some sort of flag that can be used to tell that this where the states were switched and when the flow comes back it starts from that flag rather than from beginning.
Regards
Asad Tirmizi
Design Engineer
Institute of Avionics and Aeronautics
" Its never too late to be, what u want to be"
Using LabVIEW 8.2

Urgent :How to Start the JavaBean in the start up of Tomcat Server

Hi All
1. I need JavaBeans to be Started at the time of Starting of the Tomcat Server where i am Storing some global Database values in Hashtable collection.
2. I dont want to show the full address like http://domain.com:8080/mypath/jsp/file.jsp
how to reduce the path http://domain.com/file.jsp .. i don't want to show the full path (port number, where i am storing the files
3. when the user type http://domain.com:8080/mypath/jsp/
it shows all the files under that directory.. i dont want to show the direcotry content to outside user .. how to restrict that.
thanks and regards
sreekant

i want to start some jsp files at the start of the
tomcat server.
in some IDE i saw an option like "when start up"
i want that type of facility to my site for loading
global variables to all the web pages.1) JSPs have to be hit by something (some kindof request or dispatched request) so "starting jsp files" isn't quite the right mechanism.
2) The servlet spec provides 2 ways to load things on startup:
i) the <load-on-startup> tag in the web.xml for loading a particular servlet when the particular application loads
ii) The ServletContextListener interface and the corresponding <listener> tag in the web.xml. If your initializing is non-web specific (e.g. logging, starting up some kind of service, initializing global vars) than this is the better (and easier) route to take.
If you want to put these in the root context to happen when tomcat starts, then you'll have to make these modifications to tomcat's root web application (ROOT in the webapps folder).
ncuka
ncuka

How to start the admin server on another WLS machine?

Hi,
          I have a weblogic cluster with 2 weblogic machines: machineA and machineB.
          The cluster contains 4 managed servers (2 on each WLS machine)
          The admin server runs on machineA (standalone).
          I have a file backup of the domain directory on machineA.
          Suppose machineA crashes.
          How can I start the admin server on machineB?
          Kind regards,
          Pieter

Thanks for your reply,
          I know how to (re)start the admin server on machineA. But in this case I want to start the admin server on machineB.
          The documentation says:
          Restarting an Administration Server on Another Machine
          If a machine crash prevents you from restarting the Administration Server on the same machine, you can recover management of the running Managed Servers as follows:
          Install the WebLogic Server software on the new administration machine (if this has not already been done).
          Make your application files available to the new Administration Server by copying them from backups or by using a shared disk. Your application files should be available in the same relative location on the new file system as on the file system of the original Administration Server.
          Make your configuration and security data available to the new administration machine by copying them from backups or by using a shared disk. For more information, refer to Directory and File Backups for Failure Recovery.
          Restart the Administration Server on the new machine.
          Simply starting the admin server on the other machine does not work because it tries to start the admin server on the ip address of the old machine.
          Edited by [email protected] at 05/10/2007 7:47 AM

How to start the Solution Manager Implementation

Hi Gurus , I am in Solution manager implemnetation project , and i wanted built the exsisted landscape into Solman so any one can help me out in this like where to and how to start.

Hi Gurus, i wanted to implement these concepts
Configuring Solution Manager
Configuring Solution Manager
1)      Solution Monitoring
a       SAP EarlyWatch Alert
a1      Setting-Up EarlyWatch Alerts    Y
a2      Manually Executing Downloads    Y
a3      Create Report and Display Session Details       Y
a4      Save, Retrieve and Archive EarlyWatch Alert     Y
b       Service Level Reporting
b1      Service Level Reporting Change Mode     Y
b2      Maintain General Settings       Y
b3      Specify Systems and Contents for Service Level Report   Y
b4      Select Business Processes for the Service Level Report Y
b5      Select Business Processes from the Business Process Monitoring Y
b6      Process Service Level Report Data Manually      Y
b7      Create Service Level Report     Y
b8      Create, Save and Archive Service Level Report Manually Y
b9      Process Service Level Report Session    Y
b10     Send E-Mail Automatically       Y
b11     KPI Calculation Y
2       Configuring Alert Monitor
       Central System Administration (Part of ALERT Monitor)
c2.1    MTE Classes and Attribute Groups        Y
c2.2    Methods Y
c2.3    Operating the Alert Monitor     Y
c2.4    Actions in the Alert Monitoring Tree    Y
c2.5    Selecting Nodes in the Alert Monitoring Tree    Y
c2.6    Elements of the Alert Monitor   Y
c2.7    General Properties of Monitoring Tree Elements Y
c2.8    Properties of Monitoring Objects and Attributes Y
c2.9    Customizing the Alert Monitor   Y
c2.10
Changing Properties in the Alert Monitoring Tree
       Y
c2.11
Changing Properties in Customizing Transaction RZ21
       Y
c2.12
Triggering a Heartbeat Alert if No Values Are Reported
       Y
c2.13
Changing the Frequency of Method Execution
       Y
c2.14   Defining, Releasing, and Transporting Methods
       Y
c2.15
Assigning Methods to MTE Classes or Individual MTEs
       Y
c2.16   Assigning Methods to MTE Classes or Individual MTEs     Y
c2.17
Editing Monitors and Monitor Sets
       Y
c2.18
Creating and Editing Monitor Sets
       Y
c2.19   Transporting Monitor Sets and Monitor Definitions       Y
c2.20   Copying, Renaming, and Deleting Monitors        Y
c2.21   Creating and Changing Monitors Y
c2.22   Rule Node: Rule Description and Use     Y
c2.23   Defining Monitors with the DEFINE_R3_SYSTEMS/GET_MTE_BY_CLASS Ru        Y
c2.24   Defining Monitors with the Rule GET_MTE_BY_CLASS_AND_OPTIONS    Y
c2.25   Defining Monitors with the Rule GET_MTE_BY_CLASS_AS_VIRTUAL     Y
c2.26   Copying a Monitoring Properties Variant Y
c2.27   Create Monitoring Properties Variant    Y
c2.28   Change Monitoring Properties Variant    Y
c2.29   Activating a Monitoring Properties Variant      Y
c2.30   SAP-DEFAULT     Y
c2.31   Creating a New SAP-DEFAULT Variant      Y
c2.32   Monitoring Multiple Systems     Y
c2.33   Monitoring Multiple Systems: Defining RFC Connections   Y
c2.34   Monitoring SAP R/3 3.x Systems Y
c2.35   Creating the CSMREG User        Y
c2.36   Monitoring Multiple Systems with an Identical System ID Y
c2.37   System Groups in the Alert Monitor      Y
c2.38   Deactivating and Reactivating Monitoring Tree Elements Y
c2.39   Deleting and Restoring Nodes in the Alert Monitoring Tree       Y
c2.40   Display Options of the Alert Monitor    Y
c2.41   Saving and Resetting the Layout of a Monitor    Y
c2.42   Extending the Shared Memory Area        Y
c2.43   Setting Up a Central Data Cache         Y
c2.44   Configuring the Caches of the Monitoring Architecture   Y
c2.45   Working with All-Clears (Green Alerts) Y
c2.46   Displaying the History of the Threshold Values of Performance No        Y
c2.47   Availability Monitoring with CCMSPING   Y
c2.48   Installing Availability Agent CCMSPING Y
c2.49   Changing the Monitoring Frequency and Timeouts of CCMSPING      Y
c2.50   Adding Systems to the Availability Monitoring Manually Y
c2.51   Finding and Correcting Errors with CCMSPING     Y
c2.52   Configuring Availability Monitoring     Y
c2.53   Creating and Changing Monitoring Rules Y
c2.54   Changing Monitoring Setting of Servers and Groups       Y
c2.55   Using Multiple CCMSPING Agents Y
c2.56   Creating and Changing a Monitoring Pause        Y
c2.57   Monitoring System Groups with CCMSPING Y
c2.58   Availability and Performance Overview Monitor   Y
c2.59   Monitoring Log Files with CCMS Agents   Y
c2.60   Structure of the Log File Template of the Log File Agent        Y
c2.61   Example Log File Templates      Y
c2.62   Logfile Monitoring Monitor      Y
c2.63   Monitoring Selected Processes with SAPOSCOL     Y
c2.64   Monitoring Response Times of Transactions or Clients    Y
c2.65   Monitoring Database Tables with the Alert Monitor       Y
c2.66   Self-Monitoring of the Alert Monitor    Y
c2.67   Selected Alert Monitor Methods Y
c2.68   Forwarding Alerts to Alert Management (ALM)     Y
c2.69   Interpreting a Text Attribute as File Name/URL and Display Content      Y
c2.70   Displaying a Subtree as ALV Grid Control        Y
c2.71   Defining an Automatic Alert Notification        Y
c2.72   Auto-Reaction Method: Execute Operating System Command Y
c2.73   Setting Up Central Auto-Reaction Methods        Y
c2.74   Installing CCM4X        Y
c2.75   Activation in the background,if the Host restarts       Y
c2.76   Creating RFC Connection Y
c2.77   Copying File from Solution manager to agents    Y
c2.78   Copying version for SAPCCM4X    Y
c3      Central User Administartion(CUA)
c3.01   Create manaintain landscape     Y
c3.02   Creating RFC    Y
c3.03   Create Logical clinets in SM1   Y
c3.04   Field distribution parameters   Y
c3.05   Transfering users from child system     Y
2       Service Desk
a       Set-Up Message Creation in Web Browser Y
b       Create support messages with NOTIF_CREATE       Y
c       Process Messages in Service Desk        Y
d       Search for Solutions to Support Messages        Y
e       Copy Support Message into Solution Database     Y
f       Forward Support Message to SAP Y
g       WebClient Interaction Center    Y
h       Create Messages with Interaction Center WebClient       Y
i       Process Messages in the Interaction Center WebClient    Y
j       Service Desk for IT Service Providers   Y
k       Using an External Service Desk Y
l       Connect an External Service Desk        Y
m       Service Desk Customizing Error Analysis Y
it's very high prioriety
Cheers

How to start the datasocket in VC++ ?

Similar Messages

Maybe you are looking for