How to stop Oracle services?
I'm new to Oracle. I have installed Oracle 10g and I'm trying to apply patch 10.2.0.5. I'm getting the error that ORASLAX10.DLL is being used by another process. I have found out that SNMP is using that dll. I have restarted SNMP but it will use the dll right away.
This is exactly what I have done before I start installing the patch:
Installed Oracle 10g 10.2.0.4
Restarted the server
I think that I probably need to shutdown Oracle services and/or database. I have checked the Services in Administrative Tools and I don't see any services with name starting with Oracle. I have ran lsnrctl status and there is no listener. What other commands should I run to check/stop any Oracles services/database?
Thanks for all the helps.
Even though the Universal Installer windows was not responding at 100%, the patch installation seems to be completed successfully according to the log file.
Where can I find a list of non-Oracle services used by Oracle? I still have not figured out which product of Oracle I installed is using the SNMP service.
Edited by: 881656 on Sep 3, 2011 5:16 PM
Similar Messages
-
How to stop oracle services using Net8
Hi
each time I try to install oracle report 6i in myy machine (of course in the same developer home on which form installed ).
a message with title Stop oracle application
saying the following
you must stop all oracle services and application using Net8 for the Net8
installation to be successfull
press ok to continue the installation once the services and applications
have been stopped or press ok to abort this installation.
can any one help me?
oracle database 10g
windows xp
developer 6iYou can stop any service either
a) using the services applet in the control panel window
b) start a cmd box and issue
net stop <servicename>
Hth
Sybrand Bakker
Senior Oracle DBA -
How to stop the services provided by net80 and oracle9i
how to stop the services provided by net80 and oracle9i during the installation of forms6i & reports6i in windows 2003 server
Go into the control panel and choose services ... stop the services.
-
How to stop running service ?
How to stop these services :usbserviceDeviceUsageServiceTVOutGaServiceUpnpClientManagerServiceEnterpirseService I stop them then they are auto restartsonebody can help me to stop them !!Regards
At the present, they do not nessesary but thay still run cause use ram and waste pinthey appear when I updated to android 5.1.1 via PC companion
-
hello I would like to know how to stop my service by mistake and canceled an amount not want to pay or the product
Hi Jimmy,
You may be able to cancel your membership following the processes outlined here: https://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
Else, you will need to contact our support for assistance with the process: Contact Customer Care
Be sure to sign into the Adobe ID associated with your membership
Hope that helps,
- Dave -
How to get Oracle Service Bus 10gR3 for windows 64 bit
Hi,
I'm looking for Oracle Service Bus 10gR3 and Oracle Data Service Integrator 10gR3 installables for Windows 64-bit. However, I saw the available versions on download section are only for indows 32-bit. I'm using win 64-bit to detect 4BG RAM or more which is not possible in win 32-bit.
Can anybody help me wheather compatable version are available or is there any solution for that?
Thanks in advance,
GaneshHi Ow;
Please check:
Step-By-Step Install of RAC with OCFS on Windows 2003 [ID 178882.1]
WIN: Does Oracle Cluster File System (OCFS) Support Access from Mapped Drives? [ID 225550.1]
How To Check The Certification Matrix for Real Application Clusters [ID 184875.1]
Regard
Helios -
How to get "Oracle Services for MTS" working?
I've implemented the microsoft code example (see at the bottom) for the use of distributed transactions (with system.transactions and MTS support). The code works fine as long as I use only MS sqlserver.
Well, I tried one connection to an oracle database and one connection to the sqlserver - and here the trouble starts ;-)
Oracle doesn't care about the transaction. After the command is executed the changes are made to the oracle database at once (no commit has occured at that point) even if the second command isn't successfull.
I suppose at the moment that the problem must be something around the interaction between MTS and oracle database, more precisly the oracle Services for MTS.
I've installed the odp.net client (ODAC1020221.exe).
The installer tells me that oracle data access components 10.2.0.2.21 and within the Oracle Services for MTS are installed.
But I cannot find a service with that name in the service list, OracleMTSRecoveryService is listed, but I'm not sure if that's the right one.
So here are my questions:
What's the name for 'Oracle Services for MTS' in the services list?
Do I have to install more than the odp.net client to get the MTS support running?
Is there a mistake in the code I'm running?
any help is welcome ...
thanx in advance!!!
And here's the code I'm working with:
[Transaction(TransactionOption.RequiresNew)]
public class Worker : ServicedComponent
[AutoComplete]
public void Test()
using (TransactionScope scope = new TransactionScope(TransactionScopeOption.RequiresNew, new TimeSpan(0, 5, 0)))
DbProviderFactory theFactory = DbProviderFactories.GetFactory("Oracle.DataAccess.Client");
using (DbConnection connection1 = theFactory.CreateConnection())
try
connection1.ConnectionString = ".........";
connection1.Open();
DbCommand command1 = theFactory.CreateCommand();
command1.Connection = connection1;
command1.CommandText = "Insert into user (name, surname,benoid) values ('hans','wurst','32315134512345')";
object returnValue = command1.ExecuteNonQuery();
using (SqlConnection connection2 = new SqlConnection("Data Source=localhost;Database=UserManagement;Trusted_Connection=true;"))
try
connection2.Open();
//this command fails
SqlCommand command2 = new SqlCommand("Insert into uuuu (name, vorname) values ('hans','wurst')", connection2);
object retValue = command2.ExecuteNonQuery();
catch (Exception ex)
return;
catch (Exception ex)
return;
scope.Complete();
}hey what's up you figured out your problem with M$DTC/Oracle 11i with ODP.NET trying to do a TransactionScope?
I saw your problem - and I ran into the same.
Re: 10g Express + ODP.NET (version 2.111.6.20) > support TransactionScope?
Trying to install "Oracle Services for MTS" not sure how but working on it now. Doc looks old however,
http://www.oracle.com/technology/tech/windows/ora_mts/index.html
Did you get pass this already? -
How to create oracle services using grid control
Hi All,
I have oracle grid control account my grid control version is 10.2.0.4.0.Can any one please let me know the tab from which I can create Oracle services.
I know we can create oracle services using DBCA also.When I'm trying to do that way it is giving below error.
dbca
DISPLAY not set.
Set DISPLAY environment variable, then re-run.
How to set DISPLAY environment variable.
Thanks,
Rafi.Normally, you set DISPLAY to an IP address with the suffix : and 0.0: the IP address must match a machine able to display X11 windows.
Example with Linux bash shell:
export DISPLAY=192.168.0.1:0.0What is your OS version ? What is your shell (bash, ksh, sh, csh) ? How do you connect to the UNIX host ?
Edited by: P. Forstmann on 8 févr. 2010 09:05 -
How to remove Oracle Services from Win NT Services
I had oracle 8i(8.1.6) installed and then tried to upgrade to 9i (9.2) but it got messed up as database upgrade only works from 8.1.7 to 9 and not from 8.1.6. SO I uninstalled both 8i & 9i and want to install it again a fresh but before doing this I want to remove the oracle services in Win NT Services.
How can I do this?
ThanksHere are a couple of links to instructions as to how you might uninstall Oracle:
From this forum:
Re: HTML DB 1.6
From elsewhere on the web:
http://www.cryer.co.uk/brian/oracle/howto_orcl_uio.htm
http://www.louisville.edu/it/twotier/oracleinstall/uninstall/
http://www.orafaq.com/msgboard/windows/messages/1144.htm
Good Luck -
Is "shutdown" = "stop Oracle services"?
When I perform a "shutdown" command from sydba:
Is this the same as if I do no shutdown but stop all the Oracle services e.g. (for XE):
XETNSListener
and
XEService
If it is more: What more?
PeterNo it is not the same. The listener and other Oracle processes like the agent are controlled differently than the database service. Please see your documentation.
Sorry forgot the link
http://download.oracle.com/docs/cd/B25329_01/doc/admin.102/b25107/toc.htm
Regards
Tim
Edited by: Tim Boles on Apr 22, 2009 8:00 AM -
How to Uninstall oracle services for microsoft transaction server 64 bit
Dear All ,
I would like to know how to Uninstall only oracle services for microsoft transaction server from 11G installtion. I was trying to use "deinstall.bat" but which removes everything from the system. When i use "Oracle Universal Installer" but it doesn't let me do it. I am using Oracle 11G with patch 8 on Windows server 2008.
Any replies are highly appreciated.
ThanksHI Salman,
I am doing the following.
1. I am installing Oracle 10.2.01 Database(Not Client) on my windows Xp laptop. While installation i Choose the custom option and Check the Oracle Windows Interface. In that i check the "Install Oracle Services for Microsoft Transaction server" checkbox. The installation goes on fine till 99% and when it tries to install the
Oracle Services for Microsoft Transaction server it gives an error saying that "Microsoft Transaction server" was not found on the system.
I had previously installed the same on my laptop and it was working fine. but after uninstallation when i try to re install i get this problem.
If i go to the services.msc option in windows i still see the OracleMTSRecoveryService option even when i have uninstalled oracle. But when i try to start the services i get the following error
Could Not start the OracleMTSRecoveryService on the local computer.
Error 3: The system cannot find the file specified.
Any help on how to resolve this issue will be highly appreciated -
How to install Oracle Services for MTS (9i)
OK, I'm confused. I thought installing OraMTS components would be the same in 9i as in 10g.
In 10g I load the universal installer, and Oracle Services for MTS is present as a tickable, installable option
If I load the 9i installer (or point the 10g installer at the 9i stage directories) the option for Oracle Services for MTS just isnt there as a tickable option
How did you guys with 9i get the installer to put MTS on? (oramts.dll and it's friends)From the base 9.2.0.1 media, start up OUI, choose Custom install type and tick Windows Interfaces (installs odbc, ole db, oramts, ...). If you have Metalink access, you may want to apply a patch set e.g. 9.2.0.7.
You can get 9.2 ODAC (which also includes Oracle's .Net Data Provider), from http://www.oracle.com/technology/software/tech/windows/odpnet/utilsoft.html to install just the Windows Interfaces directly, or to upgrade these files in a patched Client (patch sets seems to not affect/update these dlls). -
How to stop Oracle XE from starting at System Startup
Dear All,
I use Oracle Database 10g Express Edition and I don’t want it to run at system startup ,because it really slows my system . What can I do for it?
ThanksHi,
Its very easy to prevent Oracle XE from starting up automatically.Just change the startup type of the Oracle service to “Manual”.
You can do that by navigating to your Control Panel -> Administrative Tools -> Services, double click on the Oracle service and change the Startup type to Manual.
Regards,
Kumar
[www.idatamax.com] -
How to stop sql services and sql agent services on multiple servers
Looking for a t-sql/powershell script to stop/start sql services on multiple servers. Plan is to execute script from centralized server.
Rahulsee
http://www.databasejournal.com/features/mssql/article.php/3644906/Automatically-Stopping-and-Restarting-SQL-Server.htm
http://sqlpowershell.wordpress.com/2013/04/11/powershell-check-start-and-stop-sql-services-of-a-remote-servers/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Any suggestion on how to stop "update service provider"
Every time I connect my iPhone to my iMac computer, iTunes keeps asking to update my service provider. I keep updating the settings, but it keeps asking me to update service provider every time I connect. How do I stop this from happening?
One of the most common causes of camera delay that I've seen is having too many pictures stored on your phone.
Maybe you are looking for
-
How to Update/install Photoshop CC version 14.2 (TRIAL)
Hi there, I was really glad to see this new feature in Photoshop CC that exports PSD's to adobe reflow, So I decided to try out this trial to see if I like it and if it works good. I have been a very happy customer and adob product fan for years now.
-
Problem with initialization Delta queue
Hi Gurus, I have problem with initialization of delta queue when I try load transaction data from R3 (FM) to BI. Error message: Deviation of (64 seconds) between qRFC counter (000012365466830000080000) and actual time (08.03.2009 21:10:19). I have no
-
Hi my problem is that i passed data from Source R3 sytem to XI.I am receiving XML message in XI.But XML massege is not passed to target R3 System. Suoure System Distribution Model Details: Sender:TESTBSYS2 (r3source) Receiver:IQXCLNT600
-
PSE 6 & 7 Together and Restore Preferences
I have two questions.. First: Can I have both PSE 6 and 7 on my computer at once? The reason I ask is I started a PSE 6 class a couple of years ago. I had to buy Adobe Classroom in a Book for PSE 6.0. It came with a CD. Second: I don't have 6 on
-
Dvd is done, how do I make copies?
I created a movie in iMovie, shared it to iDvd, applied a Theme, and burned a dvd. Now I want to make multiple copies of the dvd. To do so thru iDvd would take a very long time, as the movie is 1 hour and 45 minutes. I have Popcorn, Handbrake, and MP