How to stop RMAN backup scroll on the screen

Hello Folks,
I have written the following script
#!/bin/ksh
rman target=sys/blue1pill@ODPTDB << EOF
set echo off
run {
allocate channel ch00 type disk;
backup full
format '/oracle/dump/ODPTDB/rmanbackup/dbbkup_u%u_s%s_p%p_t%t.bak' database;
backup
format '/oracle/dump/ODPTDB/rmanbackup/ctlbkup_s%s_p%p_t%t.bak' CURRENT CONTROLFILE;
sql 'alter system switch logfile';
backup
format '/oracle/dump/ODPTDB/rmanbackup/arcbkup_s%s_p%p_t%t.bak' ARCHIVELOG ALL;
release channel ch00;
crosscheck archivelog all;
exit;
echo .
EOF
However I cannot stop it from scrolling on the screen. It will be very nice and kind of you to help me solve this. I am looking to stop the output displayed on the screen and written to a file, say a log file.
Thanks
Shiva

You could adjust your current script to include a log file directly by using:
rman target=sys/blue1pill@ODPTDB << EOF > logfilename.logOr you can consider using the LOG parameter or the SPOOL command.

Similar Messages

How to stop RMAN backup in solaris platform.

Dear All;
How to stop RMAN backup in solaris platform.
Ranjan

788442 wrote:
How to stop RMAN backup from oracle end.
To stop Rman backup you have to identify rman session as below
select * from v$session
where MODULE like 'rman%'or you can use v$rman_status identify sid and serial then kill this session as
alter system kill session '<sid>,<serial>' immediate;

How is RMAN backup different than the other conventional methods of backup

Hello to all,
I have a question if somebody can please answer my queries
How & Why is RMAN backup different than the other conventional methods of backup.
What is different in the way a database is backed up using RMAN.
I am very well aware of the capabilites of RMAN to recover from a loss , but I did like to know as to how RMAN makes it possible to go about it.
Please answer
Altaf

You can start with the reading of the Oracle docs:
Backup and Recovery Basics
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14192/toc.htm
Backup and Recovery Quick Start Guide
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14193/toc.htm
Backup and Recovery Reference
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14194/toc.htm

How to get RMAN backup logfile.

Hi All,
Can u tell me How to get RMAN backup logfile after completion of the backup.

SQL> desc v$rman_output
Name                            Null?    Type
SID                                  NUMBER
RECID                                  NUMBER
STAMP                                  NUMBER
SESSION_RECID                             NUMBER
SESSION_STAMP                             NUMBER
OUTPUT                              VARCHAR2(130)
RMAN_STATUS_RECID                        NUMBER
RMAN_STATUS_STAMP                        NUMBER
SESSION_KEY                             NUMBERIt works for me

How to identify rman backup level?

Hi,
I am using rman catalog for rman backup. how to identify rman backup level from catalog.
Thanks,

By doing the obvious and consulting the online documentation at http://tahiti.oracle.com
You will notice the list backup command output has a level column and this is also present in rc_backupset and/or rc_backuppiece.
Sybrand Bakker
Senior Oracle DBA

How to move rman backups on tap from disk

Hi,
I have rman backup files on the disk, now how we can move these files to tap. is there any rman command or is there any script to move.
Thank you!

Do you use FRA (Flash recovery area)?
If you use FRA then configure RMAN to take backup to tape. And backup fra to tape.
RUN
ALLOCATE CHANNEL ch0 TYPE ‘SBT_TAPE’;
BACKUP RECOVERY AREA;
RELEASE CHANNEL ch0;
If you don't use FRA then you can backup your backupsets which are on the disk to tape.
RMAN> BACKUP DEVICE TYPE SBT BACKUPSET ALL;
Talip Hakan Ozturk
http://taliphakanozturken.wordpress.com/

How can we take backup of all the RDL'S existing at Report server dynamically at one time

How can we take backup of all the RDL'S existing at Report server dynamically at one time ? I want to take backup of all the reports existing at the report server dynamically at one time only. currently I'm able to take backup of the reports folder wise
using VBScript. and I have to pass the folder names again and again. I want this to be happened for all the reports of all the folders at single shot only using VBScript.

Hi DineshRemash,
Based on my research, we can store the following VB Script to a text file, then modify the file name extension from .txt to .rss.
Dim rootPath As String = "C:\Reports"
Sub Main()
Dim items As CatalogItem() = _
rs.ListChildren("/", true)
For Each item As CatalogItem in items
If item.Type = ItemTypeEnum.Folder Then
CreateDirectory(item.Path)
Else If item.Type = ItemTypeEnum.Report Then
SaveReport(item.Path)
End If
Next
End Sub
Sub CreateDirectory(path As String)
path = GetLocalPath(path)
System.IO.Directory.CreateDirectory(path)
End Sub
Sub SaveReport(reportName As String)
Dim reportDefinition As Byte()
Dim document As New System.Xml.XmlDocument()
reportDefinition = rs.GetReportDefinition(reportName)
Dim stream As New MemoryStream(reportDefinition)
document.Load(stream)
document.Save(GetLocalPath(reportName) + ".rdl")
End Sub
Function GetLocalPath(rsPath As String) As String
Return rootPath + rsPath.Replace("/", "\")
End Function
Then navigate to the folder contains the script, we can directly run the below command from the run menu:
rs -s
http://aa/ ReportServer -i download.rss
We can modify the rootpath to point at whaterver fold you’d like to download the RDL files.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

I have been sampling new imported drum loops. And if I adjust region to song or time strecth it updates the audio file in the library. How to stop this? I lost the original setting to one loop. automatically doing it ??

I have been sampling new imported drum loops. And if I adjust region to song or time strecth it updates the audio file in the library. How to stop this? I lost the original setting to one loop. automatically doing it ??

This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

How to control RMAN backup of archive logs in FRA

Setup:
11.2.0.2 GI
ASM Diskgroup for Fast Recovery Area
10.2.0.4 Enterprise Database
Without Catalog Database
To get familiar with Flashback Database we set up RMAN Backups
without deleting the archive logs,
as published in Oracle10g / 11g - Getting Started with Recovery Manager (RMAN) (Doc ID 360416.1)
"These deletions are managed by Oracle when space is required."
We observed that RMAN takes backups of all archive logs every time,
here we go with backing up archive logs every 30 minutes.
So the question is:
Is this (backing up all archive logs every time) the expected behavior or
the result of not using a catalog database or
any other mismatch?
thanx for any hint
Michael

Hi Michael,
In Note 360416.1 it refers to two archivelog backup commands.
BACKUP ARCHIVELOG ALL;and
BACKUP ARCHIVELOG FROM TIME 'SYSDATE-30' UNTIL TIME 'SYSDATE-7';Your question:
Is this (backing up all archive logs every time) the expected behavior or the result of not using a catalog database or any other mismatch?If you used the first script you will backup alle archivelogs everytime.
If you use the second one it will do a subset (probably not the range you want to backup...)
You could implement another script
BACKUP ARCHIVELOG NOT BACKED UP 2 TIMES;So every archivelog is only backed up twice.
Check
http://download.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta009.htm#i78895
for more information.
Regards,
Tycho

HT1430 How can you reboot your Touch if the screen is frozen and will not allow you to use the "slide to power off"

How can I reboot my Touch when the screen is frozen and I cannot use the "slide to power off" feature?

Next try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Why does the swiping not work to scroll down the screen

why does the swiping not work to scroll down the screen or swipe from side to side

Thank you for the reply. But can you tell me what this configuration is about and how I should do this?

How can I reset my ipod? The screen is showing it is disabled and my daughter forgot her password.

How can I reset my ipod? The screen is showing it is disabled and my daughter forgot the password.

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

I cracked my iPad 3. How much would it be to repair the screen?

Hello, I have recently cracked my ipad. I would like to get that apple device repaired. It is the ipad 3 by the way.PLEASE HELP! How much would it cost to get the screen repaired by Apple?

Apple's Limited Warranty http://www.apple.com/legal/warranty/ for iPad excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications.
Apple will provide a replacement iPad for:
iPad model
Out-of-Warranty Service Fee
New iPad
$299
iPad 2, iPad
$249
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
You can get the glass replaced at 3rd party repair sources for less $, however, the Apple warranty will be voided.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/
 Cheers, Tom

How do I fix my itouch if the screen is flashing?

How do I fix my itouch if the screen is flashing purple, black, and white streaks and is unresponsiveness to the power on/off button?

Try here:
iOS: Not responding or does not turn on

How do i fix my ipod when the screen cracks

how do i fix my ipod when the screen cracks

Have Apple, a third-party place or fix it yur self.
Apple - Support - iPod - Repair pricing
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
DigiExpress.us - The iPad Repair Professionals
iPod Touch Glass Replacement

How to stop RMAN backup scroll on the screen

Similar Messages

Maybe you are looking for