How to stop writing to FCC

Hello All,
One of the target field is mapped from source in my message mapping.
Is there anyway to stop writing Integration Engine output to receiver file adapter?
Thanks,
Regards,
Moorthy

Hello,
You can use the technique used in variable substitution. Namely, in your FCC specify
1.) NameA.fieldFixedLengths set to 0(for the field)
2.) NameA.fixedLengthTooShortHandling set to cut
Hope this helps,
Mark

Similar Messages

How to stop while loop

I can't figure out how to stop a while loop in my labview program.
When the user presses the Run arrow in the toolbar I want my program to begin reading the serial port for GPS messages. These messages should be displayed on the front panel. Currently I have this read/display in a while loop. The program is also waiting for an extrenal trigger. When that trigger arrives, I want to grab the current string from the serial port and save it and continue reading and displaying the serial/gps string. This trigger starts the other parts of the program- signal generation, recording, and saving data which need to run concurrently with the serial/gps reading/displaying. Once the AO and AI have finished and the data have been written to disk, I want the program to stop. The serial/gps messages should be updating this whole time. Only when the data are written to disk should the whole program end. This whole sequence of events should only be done once when the user preses the Run arrow.
So far I'm unable to pluck the serial string when the trigger comes in if I'm watching the serial port all the time. The program also doesn't stop when it finishes writing to disk because the read serial while loop is still running. I don't want to use a front panel stop button. The program should stop itself when the data havebeen written.
I'm really stumped on this one but I'm new to LabVIEW so I'm sure there's an easy solution to this.
Thanks for any and all help.
Attachments:
SPoleLakeChirp.vi ‏199 KB

Dennis and altenbach- Thank you both for your patience.
I was trying to do just what Dennis suggested-"As I said, setting a local variable is one way." even before posting to this forum, but I couldn't get my local variables to reflect changes made elsewhere in the program and I wasn't able to wire from them because they were writes. The critical part I was missing was how to change a local variable from a write to a read. It was staring me in the face the whole time- just right click. When I finally found it, my problems were solved.
altenbach- thank's for putting the figures together. I do understand the logic and wiring there, but I was really trying to avoid stop buttons. The program should be smart enough to figure out when to stop. And using local variables turns out to be one way of solving this. I still have some clean up to do, but I've included my current working version just so you can see how I implimented your suggestions. There's still a lot of clean up to be done, but I'm delighted to be able to watch the serial/gps messages until I'm done reading in data. At first I had this stop variable set in the final sequence frame. That didn't work because I wasn't getting to the final frame because the loop wasn't finishing. Once I placed the stop variable in the same frame as the while loop it began stopping when it should.
If you have other comments/critiques about the wiring diagram I'm earger to hear them. I'm considering the structure finished, however. It still needs cleaning up and commenting, but I'm satisfied with the functionality.
Thanks,
Peter
Attachments:
SPoleLakeChirp.vi ‏210 KB

How to stop pop up in my macbook.

i am fed up with poping up new windows everytime i click on any link can anyone suggest me how to stop pop up in my macbook. i tried safari and google preference to block pop up but it's not working it out. thanks in advance...

You may have installed the "VSearch" trojan, perhaps under a different name. Remove it as follows.
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
This trojan is distributed on illegal websites that traffic in pirated content. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

How to stop the java timer

I tried writing a program for a scheduler using java , compiled and ran in java 1.6 .The code is given below
import java.util.*;
public class TimerTaskEx2 {
     public static void main(String[] args) {
          Timer timer = new Timer();
          timer.scheduleAtFixedRate(new TimerTask(){
               public void run() {
                    System.out.println("Java");
          }, 5000, 1000);
output
Java
Java
Java
Java
Java
Java
Java
The output of this program starts after 5 milliseconds delay and keeps running infinitely becoz the program is written only in such a way .
but my actual requirement is the timer should start 5 milliseconds after i run the program and stop after 20 milliseconds .
Here I need to know how to stop it at a required time interval
I dont find any api regarding this in 1.6 spec .
please clarify how to do that .
Thanks
Jee

try this code:
import java.util.*;
public class TimerTaskEx2 {
     public static void main(String[] args) {
          Timer timer = new Timer();
          timer.scheduleAtFixedRate(new TimerTask() {
               int i = 0;
               public void run() {
                    System.out.println("Java");
                    i++;
                    if (i > 3)
                         this.cancel();
          }, 5000, 1000);
Also, make sure to close the alive thread too.

How to stop Mail from downloading automatically even it is set not too

My mail programme preferences are set to download manually.
In advanced, the account is not 'included in automatically checking for new mail'
I use scripts to send mails after certain tasks are ready. Sometimes (randomly) mail all of a sudden downloads all mail.
Anybody know what could cause this?
How to stop it as I do not want it to download mail at all as I use an other programme for reading and writing mail.

Hi Mulder
What you're describing doesn't make sense. Mail doesn't download mail if it's set to wait for a manual initiation.
I know however...
But once that is check is initiated, any and all waiting mail will be downloaded.
I know.
I've never heard of this happening before, to anyone. Unless your preferences are corrupted, which there's no indication of at this point, something else is triggering Mail to check for new email.
I never heard either, hence posting
But if you're using some other program for sending and receiving email, why would you have that account setup in Mail, as that would defeat the purpose of supposedly using that other program. If you really want to eliminate the possibility of this happening, you would need to delete that account in Mail, and backup the mail for that account before you delete it.
complex issue, but rather keep both programmes.
Otherwise, we need more details, including which version of Mac OS X you're running, and the other program that you're using for email.
OS 10.5.5
Mail 3.5
other programme Entourage

I've created various playlists on my iphone5. Everytime I sync my phone with itunes on my PC i lose the playlist. Any ideas on how to stop this happening?

I've created various playlists on my iphone5. Everytime I sync my phone with itunes on my PC I lose these playlist. Any ideas on how to stop this happening? I've tried various methods but the sync always results in the playlists which I've set-up on itunes on my PC over-writing my mobile created playlists. Having just purchased an iphone 5s I want to ensure that my iphone playlists transfer over ok to my new phone.

sign out of your apple ID on your iPad or sign out of your email address in the message settings

How to stop autofillin?

When writing the program suggests a result. How to stop This function?

Is this with forms on web pages or typing an URL in the location bar?
See also "Prevent Firefox from automatically completing URLs":
*https://support.mozilla.org/kb/search-your-bookmarks-history-and-tabs-awesome-bar
Use these steps to remove saved (form) data from a drop down list:
#Click the (empty) input field on the web page to open the drop down list
#Highlight an entry in the drop down list
#Press the Delete key (on Mac: Shift+Delete) to remove it.
*http://kb.mozillazine.org/Deleting_autocomplete_entries

How to STOP syncing with Outlook via GPRS?

I use an unlocked iPhone 3G with a prepaid mobile card.
Everytime I open my Calendar function on the iPhone (just to see the days and dates) the iPhone attempts to sync over the air with my Outlook account calendar via GPRS.
This costs a bomb on the prepaid card, and I want to stop the sync function.
Would someone kindly tell me how to STOP the iPhone from syncing with my Outlook Calendar?

If calendar events are synced over the air, this means you are accessing an Exchange account or a MobileMe account.
If you don't want to sync calendar events over the air with the account, you need to turn Calendars off for over the air syncing for the account preferences on your iPhone. This will erase all calendars and calendar events from your iPhone and you will need to sync direct with a supported application on your computer via the iTunes sync process. If an Exchange account with Outlook on a Winblows PeeCee, this will not be possible.

How to stop syncing the photos only on facebook

how to stop syncing the photos only on facebook

corg2333 wrote:
yeaa but it is not only on facebook i think..
Disable the automatic spell checking service in your browser.
Safari
--> Edit --> spelling and grammar --> uncheck "check while typing"
Firefox
http://support.mozilla.com/de/questions/500215

How to stop voice control

how to stop voice control?

Hi Joannewpark,
Press your Home Button to get to the Home Screen.
Press Settings, then press again 2x fast - you will go to the Settings screen
Press on General, then press again 2x fast - you will go to the General screen
Use 2 fingers to indicate scroll up - Voice Over will begin to read the items on the screen, and will eventually get to the Accessibility option. When it says "Accessibility" press on it, then press on it 2x fast
It will go to the Accessibility screen, tap on the Voice Over option one, and then again 2x fast, now tap on the Voice Over option again, and then double tap to turn it off.
Cheers,
GB

How to stop text box on iWeb page from automatically reverting to hyperlink when I click 'save'

As far as I see, the main text box in the body section of my iWeb page reverts to a hyperlink (connecting to a file) when I click save. I don't know how the hyperlink got activated to begin with--I must have done something, but I don't know what it was. I tried this many times to fix it: went to Inspector "hyperlink" section, activated the text box in the page, un-clicked "make hyperlinks active" (so they are inactive), then un-clicked "Enable as a hyperlink." That much works--the hyperlink (little white arrow in blue circle) disappears from the lower right corner of text box. But as soon as I save (command S), the text box reverts to a hyperlink.
If I don't click save and move around the pages, it does not revert to a hyperlink. It only reverts to a hyperlink when the file is saved. Why is it doing this and how to stop this from happening--how to permanently return the text box to a non-hyperlink?
The website page is: http://www.usronline.net/USR/VedicResearch.html. If you click anywhere randomly in the main text, you'll get a prompt to download a PDF file. This should not be, but I can't get this hyperlink to go away for good.
Many thanks in advance.
Vishnupriya

Please pardon the reply delay--a big project deadline had to be met. Now back to this work:
Yes, the text in the oval object had a drop shadow (the oval object itself did not). I removed the drop shadow from the text, but the image file icon stayed in the right corner of the oval object. I deleted the text and then the image file icon disappeared. But as soon as I typed text again inside the oval object (not even pasting the previous text) the image file icon appeared again. I deleted the oval object entirely and simply typed the text inside the main text box itself. The image file icon that was attached to that oval object is gone (along with the oval object).
Still the image file icon is attached to the main text box, though. I again tried to uncheck the Enable as hyperlink (same process as described in first posting) with that oval object gone, but when I "save" again it reverts to a hyperlink.
Next I tried this: I copied the text from the problem text box and pasted it into another text box (outside of the problem one). Still in the new text box with the pasted text, the image file icon shows in the upper right corner.
I also removed all the drop shadow features from this main text box (there was one more, on some words typed in the main text box), but it is still showing as an image.
I don't know how it became an image file, and I'm still stumped as to how to fix it (short of forgetting about trying to figure out how it became an image and just retyping all text into a new text box).
The link you provided for "Web Safe Fonts" is returning this: "The server at www.ampsoft.net is taking too long to respond." I'm using Arial and Georgia (Georgia only on the menu and header text) in the site, and I had verified before designing the site that these are web safe, so I had thought they were.
If you or anyone have any further suggestions or suspicions on this matter, I'd be glad to hear them.
Thank you.

In my macbook pro when composing email it coping into thrash as well so how to stop this ?

in my macbook pro when composing email it coping into thrash as well so how to stop this ?

You may have a Bad fan. Make an appointment and take it to the genius bar for an evaluation. It's free, in warranty or out.

Can't figure out how to stop my MBP from opening programs at startup, namely word and messages

Recenty my MBPro has started opening MS Word and Messages at startup and I can't figure out how to stop it? I've tried selecting and de-selcting the startup option from the dock but this doesn't help. Does anyone have any suggestions?

System Preferences has a setting for this.
In the Users & Groups section you will fine a "Login Items" header. This is a list of all the programs that will open automatically when you log in. You can select any program and click the [--] button below that window to stop the program from opening automatically.

How to stop iTunes creating a new library on my hard drive when it can't find the one I have created and told it to use on an external drive?

I have quite alot of music etc so to save hard drive space I have created my iTunes library on an external hard drive. If I ever accidentaly open iTunes when that external hard drive isn't attached iTunes makes a whole new library from scratch on my computers hard drive. I find this highly frustrating as I often open Itunes to find no music as it have changed librarys and I have to re-load my actual library: very frustraiting and time consuming.
I would like to know if it is possible to lock iTunes some how to stop it from changing folders when it can'f find the library, or atleast give me a warning that it can't find the library before creating a whole new one????

Tunes works through a database file which has a list of your tracks. When you click on a track it looks up in the database which file it needs to play, then plays the file. If something breaks this link then you get ! The two main ways to get ! are to move a file from where iTunes expects it to be, or to delete it altogether. I don't know which has happened in your case. You can try using Spotlight to find a file for the one referred to in a broken link. If the files have been moved then they need to be moved back. If they were deleted completely you will have to restore them from a backup or download them again from the iTunes Store and rebuild your library.

How to stop multiple auto-switching to address bar every time I open a new tab and try to type something anywhere outside of address bar?

How to stop multiple auto-switching to address bar every time I open a new tab and try to type something anywhere outside of address bar? Like something just wants me to use that embedded search when u type something not-web-address in address bar and hit enter. And the most ridiculous thing is that it happens repeatedly on like every second, like I just move down from address bar and start typing again, but then again it switches me to address bar, and 3, 4 times like that. And the result is also that I can't see the address of that page.
I think its has something to do with my AVG antivirus, because this started the same time some AVG Nation started to appear in every new tab i open (and thats also irritating me, I read about it here on support.mozilla.org and it seems that the only solution is to completely reinstall Firefox, but I dont want to lose all my settings) but when i type something in address bar and hit enter it opens the search results in Google.
Please try to help me, I like Firefox but I must switch to Chrome until I fix this problem.
Thanks in advance

First, please update to Firefox 32. 22 is no longer support nor is it secure. Then let us know if you still have this problem. [[Update Firefox to the latest version]]

How to stop writing to FCC

Similar Messages

Maybe you are looking for