How to support metadata for docx, csv, indb and others.

Hello,
Is there a plugin or a way to extend the supported extensions for metadata, especially IPTC Core?

Randall T wrote:
I recently started migrating my software to version 2009 and needed to update the device drivers on the development PC. The following message was displayed.
{LabVIEW Version Not Supported
This installer has detected that you have a version of LabVIEW that is not supported by NI-DAQmx. Please refer to the feature tree in this installer to see which versions of LabVIEW are supported by NI-DAQmx in this release. This installer will remove NI-DAQmx from any unsupported versions of LabVIEW.}
I still have a wide base of applications operating in LabVIEW 7.1. I assume others still have to support earlier versions of LabVIEW.  How do we do this?  Should we only develop software that uses NI based hardware on LabVIEW 8.6 and earlier? Do you only use 2009 and later versions for applications that do not require NI-DAQmx? Is keeping the development software for 2009 and 2010 on a separate machine the answer? Or is there a simpler solution that I am overlooking?
I was keeping a unique machine for each version but then switched to multiple boots.
I have read others that said they use virtual machines for each.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

  • How do you setup for your multi cores and other settings?

    since the preferences doesnt really give us a option does that mean that FCPX just "knows" how good your computer is and what you want to devote (memory wise, etc) to it?

    I have the same problem - beach balls and temporary freezing, on 2 Mac Pros (8 Core, 32GB RAM, HD5870 card). All the while CPU and other resources are not maxed out; this is on 10.6.8. there seems to be 'some' bugs - for some people - that in fact make FCPS quite slow (and slowing hte system down as well) all the while there is no bottleneck in hardware....  

  • For iTunes Match, how come some songs "match" on an album and other songs on the same album "upload" without matching?

    For iTunes Match, how come some songs "match" on an album and other songs on the same album "upload" without matching?  All songs are available on iTunes.  I don't get it!  Any way to manually match songs that iTunes apparently can't match?  I have hundreds in this unmatched state.

    gsl wrote:
    Shazam has NO problem determining what these songs are. Maybe Apple needs to consider licensing their technology as it seems MUCH more accurate than what they are doing.
    You aren't comparing like with like.
    The main task that Shazam has is to identify the name or a track and the artist. I believe that it suggests the album as well, but if it gets that wrong then it doesn't really matter too much.
    With iTunes Match, getting the album (i.e. identifying which version it is) is much more important. If it gets that wrong then it breaks up the flow of an album. This makes the task that match has very much harder.
    In fact, there is a strong argument to say that currently the problem iTunes has is that it is matching too many songs, resulting in matches from different albums.
    I'm sure that match is not struggling to identify whether it has a song or not, but whether it has the correct version of a song. When you introduce different masterings into the process then, depending on the thresholds set, it is probably correct in concluding that it hasn't got a particular version, even if you think it has.
    The solution would appear to me to be a tweaking of the matching thresholds along with the ability to force an upload, but we just don't know what restrictions they have (remember that if Shazam gets it wrong the it doesn't present you with a copy of a new track that you didn't have previously). It is almost certainly not just a case of improving their technology.

  • How to get classification for a given material and material type in MM

    Hello Friends,
    One of my developer colleagues is struggling to find out : how to get classification for a given material and material type in MM?
    He is looking for probable table and table fields to Select from.
    I would appreciate seriously any help in this regard.
    ~Yours Sincerely

    Hi
    Below given the flow and table details for a given class and class type.
    - Table KLAH --> This contains the "Internal class no" [ for the given Class & Class type ]
    - Table KSML --> This contains the " internal character numbers " [ nothing but characteristics attached to the class ] , which can be fetched with the above fetched internal class no
    - Table AUSP --> This table contains the objects ( material ) attached to the internal characters of that class
    - Table CABNT --> This table contains the "Description" for the internal character numbers.
    - award points if this is ok

  • How to set password for a zip file and should be checked when reading that

    Hi friends,
    how to set password for a zip file and should be checked when reading that file???
    thanks.
    Praveen Reddy.J

    Heyy man, i think, u did not get my problem.
    all i have to do is:
    i have to create a zip file, and we should secure it with password when creating. and whenever the user wants to open that zip file he should provide correct passowrd otherwise he could not read that file. So, we should check for that also.
    Tanks for reply.

  • How can I stop my iphone 4s from asking for my icloud, yahoo and other passwords all the time?

    How can I stop my iphone 4s from asking for my icloud, yahoo and other passwords all the time?

    As long as you share that AppleID for iCloud, you cannot.  You are sharing a a single iCloud account and sync services.  The only thing you can do is get a second AppleID and use it with iCloud - you do not have to use that new AppleID for anything but iCloud (ie. you can still share an AppleID for iTunes and App store purchases).
    P.S. I am assuming you both want to sync your contacts with iCloud?

  • How to set sourceURL for MS Access database in other computer?

    How to set sourceURL for MS Access database in other computer?
    getConnection("jdbc:odbc://www.micrsoft.com:9999/msaccess");
    How do you determine the port for the MS Access?
    Thank you very much.

    How to set sourceURL for MS Access database in other computer?You don't.
    How do you determine the port for the MS Access?You don't.
    Databases like Oracle and MS SQL Server have 'server' software which runs on a server computer. Requests talk to that server software. MS Access does not have a server, so there is nothing to talk to.
    You either must use a DSN or create you own server. For the DSN each client must have a mapped driver to the computer with the database. For your own server search the Sun site for JDBC drivers or use RmiJdbc (http://www.objectweb.org/)

  • I have an active full CC subscription; how come some Apps come up as try and others as install?

    I have an active full CC subscription; how come some Apps come up as try and others as install?

    Log out of your cloud account... restart your computer... log in to your cloud account
    If that does not fix the problem
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • A fast automatic tag fixer for owners of Zen and other tag based players

    Fast automatic tag fixer for owners of Zen and other tag based players.
    I've written a simple freeware utility for fixing mp3 tag discrepancies. It is intended for use before uploading a bunch of albums to a tag-only media player. There's like a million of such programs out there, but this one is based on my exprience with the Creative Zen player, so it could be useful for fellow owners of the device.
    First, the utility scans mp3 album folder tree looking for tag inconsistencies and suggesting corrections. After that you can review (and cancel/modify if needed) the corrections and apply the changes.
    The detected tag errors can be corrected either manually or semi-automatically with the integrated Discogs search. There's a tuneable compilation processing feature, which helps keep compilation albums in one piece on your player.
    You can check the utility out here http://taghycardia.narod.ru/english.html
    Feature suggestions, bug reports welcomed.

    The free program has been vastly updated since the last post.
    Now, it can find and embed cover art for mp3 albums automatically, or it can do the opposite, remove cover images from mp3 files if you need to save space on your player or mobile device. In addition, there is an ability to correct wrong track order automatically and get exact tracklists from Discogs.
    The URL is updated, too: http://taghycardia.info

  • Need the AD Link cable for SB X-Fi and other models. Anyone have an unneeded one?

    Need the AD Link cable for SB X-Fi and other models. Creative is out of stock & discontinued. Anyone have an unneeded one? TIA.

    This will do it perfectly. http://www.cableyourworld.com/prodde...?prod=CYW-1755
    I once swapped such a cable with the one supplied by Creative because I needed a few extra inches of length. Therefore my recommendation is no gamble, it is a certainty. The only reason I would anticipate failure is if the PIN 1 matching is not performed on both the sound card and I/O bay. I have also seen people turn the cable upside down as well.

  • How to generate report output in csv file and send it to user email inbox

    Hi All,
    We have requiremnt to generate the csv file from the report (Bex query)automatically and need to send that file automatically to user email address every week.
    It should be done automatically and one more thing the file name should contain that particuar date
    for example if we generate file automatically today the file name should be like below.
    US_04_15_2009.CSV
    Any one have any ideas?
    Regards,
    Sirisha

    Hi Arun Varadarajan.
    Thanks for your reply.We are in BI 7.0.Can you tell me how to  broadcast the query as CSV.Please let me know  if there is any possiblity to display or change the file name dynamically  based on system date.
    Regards,
    Sirisha
    Edited by: sirisha Nekkanti on Apr 16, 2009 4:08 AM

  • How to Improve Design for HTML, Plain Text and Multiple Recipients?

    Hello there,
    JavaMail programming is so fun! I first start off mixing the JavaMail code inside a servlet and then refactored it to two separate classes.
    Mailer is the independent class which uses JNDI to look up config parameters, sends e-mails, and then closes the connection with the protocol.
    public class Mailer {
         private Session mailSession;
         protected void sendMsg(String email, String subject, String body)
         throws MessagingException, NamingException {
              Properties props = new Properties();
              InitialContext ictx = new InitialContext(props);
              Session mailSession = (Session) ictx.lookup("java:/Mail");
              String username = (String) props.get("mail.smtps.user");
              String password = (String) props.get("mail.smtps.password");
              MimeMessage message = new MimeMessage(mailSession);
              message.setSubject(subject);
              message.setRecipients(javax.mail.Message.RecipientType.TO,
                        javax.mail.internet.InternetAddress.parse(email, false));
              message.setText(body);
              message.saveChanges();
              Transport transport = mailSession.getTransport("smtps");
              try {
                   transport.connect(username, password);
                   transport.sendMessage(message, message.getAllRecipients());
                   Logger.getLogger(this.getClass()).warn("Message sent");
              finally {
                   transport.close();
    }MailController is just a simple Java servlet where a Mailer object is instantiated and a String is passed inside the Mailer.sendMsg() method.
    public class MailController extends HttpServlet {
         /** static final HTML setting for content type */
         private static final String HTML = "text/html";
         myapp/** static final HTML setting for content type */
         private static final String PLAIN = "text/plain";
         public void doGet(HttpServletRequest request, HttpServletResponse response)
         throws ServletException, IOException {
              doPost(request, response);
         public void doPost(HttpServletRequest request, HttpServletResponse response)
         throws ServletException, IOException {
              response.setContentType(PLAIN);
              PrintWriter out = response.getWriter();
              String mailToken = TokenUtil.getEncryptedKey();
              String body = "Hello there, " + "\n\n"
                        + "Wanna play a game of golf?" + "\n\n"
                     + "Please confirm: https://localhost:8443/myapp/confirm?token="
                     + mailToken + "\n\n" + "-Golf USA";
              Mailer mailer = new Mailer();
              try {
                   mailer.sendMsg("[email protected]", "Golf Invitation!", body);
                   out.println("Message Sent");
              catch (MessagingException e) {
                   e.printStackTrace();
              catch (NamingException e) {
                   e.printStackTrace();
    }Have some design issues...
    If you can notice, I manually place the body of the e-mail (as a String) from inside the client (in this case, a Java Servlet). Also, I manually have to switch the content type inside the doPost().
    Question(s):
    (1) How can the Mailer class be set up, so it can send both HTML and plain text messages?
    (2) How can the Mailer class be structured to send e-mail to multiple recipients or one user?
    (3) Would both of these features / actions require writing two overloaded methods for sendMsg()?
    Would appreciate it if someone could help me...
    Happy programming,
    Michael

    Okay, I came up with this single method:
    Mailer.java:
    public class Mailer
         private Session mailSession;
         protected void sendMessage(String email, String recipient, String subject,
                   String plainText, String htmlText)
            throws MessagingException, NamingException
              Properties props = new Properties();
              InitialContext ictx = new InitialContext(props);
              Session mailSession = (Session) ictx.lookup("java:/Mail");
              String username = (String) props.get("mail.smtps.user");
              String password = (String) props.get("mail.smtps.password");
              MimeMessage message = new MimeMessage(mailSession);
              InternetAddress from = new InternetAddress(email);
              InternetAddress to = new InternetAddress(recipient);
              message.setSubject(subject);
              message.setFrom(from);
              message.addRecipient(Message.RecipientType.TO, to);
              Multipart multipart = new MimeMultipart();
              BodyPart messageBodyPart = new MimeBodyPart();
              messageBodyPart.setText(plainText);
              multipart.addBodyPart(messageBodyPart);
              messageBodyPart = new MimeBodyPart();
              messageBodyPart.setContent(htmlText, "text/html");
              multipart.addBodyPart(messageBodyPart);
              message.setContent(multipart);
              Transport transport = mailSession.getTransport("smtps");
              try {
                   transport.connect(username, password);
                   transport.sendMessage(message, message.getAllRecipients());
                   Logger.getLogger(this.getClass()).info("Message sent");
              catch (Throwable t) {
                   Logger.getLogger(this.getClass()).error("Unable to Send Message");
                   t.printStackTrace();
              finally {
                   transport.close();
    }Created a MailController class to instantiate and run the Mailer class.
    public class MailController extends HttpServlet {
         // doPost() method()
         public void doPost(HttpServletRequest request, HttpServletResponse response)
         throws ServletException, IOException {
              response.setContentType(PLAIN);
              PrintWriter out = response.getWriter();
              String mailToken = TokenUtil.getEncryptedKey();
              String plainText = "Hello there, " + "\n\n"
                        + "I wanna invite you to a game of golf!" + "\n\n"
         + "Please confirm: https://localhost:8443/myapp/confirm?token="
                        + mailToken + "\n\n" + "-Golf USA";
              String htmlText = "<H1>Golfer Challenge!</H1>";
              Mailer mailer = new Mailer();
              try {
                   String from = "[email protected]";
                   String recipient = "[email protected]";
                   String subject = "Golf Challenge";
                   mailer.sendMessage(from, recipient, subject, plainText, htmlText);
                   Logger.getLogger(
                               this.getClass()).info("Message Sent to: " + recipient
                                                              + " from: " + email);
                   out.println("Message Sent to: " +
                                             recipient + "\n" + " from: " + email);
              catch (MessagingException e) {
                   e.printStackTrace();
              catch (NamingException e) {
                   e.printStackTrace();
    }Question(s):
    (1) How come the Multipart Alternative only supports HTML for the second part? Can I specify it to send HTML first and plainText second?
    (2) How would I send in multiple recipients? Would I have to pass in an array reference (surrounded by a for loop) inside sendMessage() as follows:
    mailer.sendMessage(from, myArray, subject, plainText, htmlText);
    Thank you for all of your help!
    -Michael                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

  • How do i allow for a discount code or other discount on my form?

    How do allow for a discount code or other discount on the form?

    I am assuming you want to use paypal with this form which mean you need to use an HTML form. Unfortunately Formscentral doesn't support calculations with HTML forms. This is going to make discounts difficult. Depending on your exact needs you might be able to get away with using different fields for the discount. Example. Item one is standard room rate. Item two might be the same room with a AAA discount applied. etc. You will have to play with it to see if you can get it to do what you want.
    Andrew

  • Support details for 10.1.2 and 10.1.3

    Hi All,
    Do you know the support details for 10.1.2 BPEL Manager and 10.1.3 SOA Suite, when a Customer has these, how long will these be supported by Oracle?
    Can you provide any link which can provide these details?
    Appreciate your help.

    Hi,
    take a look here
    http://dietrichschroff.blogspot.com/search/label/Support?max-results=100
    there should be links you should follow.

  • HP Support Assistant For Windows 7, Vista, and XP

    This is for all of you looking to find HP Support Assistant for various versions of Windows 7, Vista, and XP.
    The link is http://h18021.www1.hp.com/helpandsupport/hp-self-support.html
    Good luck installing! 
    This question was solved.
    View Solution.

    For Windows 7 and Windows 8 only_Go to Control Panel, Programs & Features.Select HP Support Assistant and uninstall it. Restart your machine after removing it.
    Next download the latest version for your machine from the link:
    http://h71036.www7.hp.com/hho/us/en/pclc/articles/hp-support-assistant.html?jumpid=ex_r602_go/hpsupp...
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

Maybe you are looking for