Support details for 10.1.2 and 10.1.3

Hi All,
Do you know the support details for 10.1.2 BPEL Manager and 10.1.3 SOA Suite, when a Customer has these, how long will these be supported by Oracle?
Can you provide any link which can provide these details?
Appreciate your help.

Hi,
take a look here
http://dietrichschroff.blogspot.com/search/label/Support?max-results=100
there should be links you should follow.

Similar Messages

Configuration Details for GL account, Fund and Funds center

Hi All
I am executing budget report by using FMRP_RFFMEP1FX. In this report shows the fundcenter wise invoice details. As I execute the report with different fund center I am getting different output that is not match with actual one for that I want to know which transaction code maintains the fund, Fundcenter configuration details.
1. Which transaction code maintained GL, FUND and Fund center configuration?
2. In SPRO where to find the fund and fundcenter configuration details.
Please let me know
Thanks & Regards
KRISHGUNA

In SPRO go to Public Sector Management to find the configuration details for Funds Management.
Thanks and regards
Kedar

How to support metadata for docx, csv, indb and others.

Hello,
Is there a plugin or a way to extend the supported extensions for metadata, especially IPTC Core?

Randall T wrote:
I recently started migrating my software to version 2009 and needed to update the device drivers on the development PC. The following message was displayed.
{LabVIEW Version Not Supported
This installer has detected that you have a version of LabVIEW that is not supported by NI-DAQmx. Please refer to the feature tree in this installer to see which versions of LabVIEW are supported by NI-DAQmx in this release. This installer will remove NI-DAQmx from any unsupported versions of LabVIEW.}
I still have a wide base of applications operating in LabVIEW 7.1. I assume others still have to support earlier versions of LabVIEW. How do we do this? Should we only develop software that uses NI based hardware on LabVIEW 8.6 and earlier? Do you only use 2009 and later versions for applications that do not require NI-DAQmx? Is keeping the development software for 2009 and 2010 on a separate machine the answer? Or is there a simpler solution that I am overlooking?
I was keeping a unique machine for each version but then switched to multiple boots.
I have read others that said they use virtual machines for each.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

HP Support Assistant For Windows 7, Vista, and XP

This is for all of you looking to find HP Support Assistant for various versions of Windows 7, Vista, and XP.
The link is http://h18021.www1.hp.com/helpandsupport/hp-self-support.html
Good luck installing!
This question was solved.
View Solution.

For Windows 7 and Windows 8 only_Go to Control Panel, Programs & Features.Select HP Support Assistant and uninstall it. Restart your machine after removing it.
Next download the latest version for your machine from the link:
http://h71036.www7.hp.com/hho/us/en/pclc/articles/hp-support-assistant.html?jumpid=ex_r602_go/hpsupp...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Supporting details vs Excel to "lock and send"

If user update Supporting details into a Planning form cell, then use Excel to "lock and send" a different dollar amount to that same cell, who will have precedence?
Is there a utility that will force/ synchronize Planning to roll up supporting detail's dollars into Essbase cell (thus overwriting L&S)?

Hi,
Supporting detail information is held in the planning relational repository, essbase holds the total number.
If a user enters supporting details in planning and then locks and send data straight into essbase then planning supporting details will be out of sync.
If you are using supporting details then you should try avoid this situation by entering data via planning or smartview.
Cheers
John
http://john-goodwin.blogspot.com/

HR Report for finding details for the new hires and leavers

Dear All,
I am very new to SAP HR ABAP.
Need Help
I have to create a report which fetches all the details <Details are mentioned below>
for all the
1)     New hires
2)     Leavers
in between a time range.
<Details to be fetched :~
Title
Fax
Mobile
Nationality
Domicile
Religion
Passport
Place of issue
Issue date
Valid till
Date of Hire
Action Reason
Reporting to
Date of exit interview
Leave Date
Leaving Reason
Street
Address Line2
City
District
Region
Country
Postal Code
Communication Number
Personal ID
Date Of Last Hire
Location
Job
Payroll area
OrgLvl1
OrgLvl2
OrgLvl3
OrgLvl4
Personnel Number
Date of seniority
EEBankName
Bank account no
Bank account type
PERID
Thanks a lot !!!
Joy
Edited by: joydip majumder on Jul 11, 2008 10:46 AM

Hi joy ,
you can create ur own z-report for this requirement , for this u have to read the employee data with in the date rage for   infotype 0 (Action) for hiring and leaving dates. Other related infomation u can fetch from the related infotypes tables like PA0001 etc using simple select queries.All required fields can be dispalyed in the ALV output.
Regards
Lakhan
Edited by: lakhan on Jul 11, 2008 2:35 PM

Graphics driver details for MSI Z77MA-G45 and other motherboards

This is request for MSI to put more details of the on-board graphics capabilities.
My goal is to have four monitors by adding an additional PCIe graphics card.
Recent versions of Windows can only support multiple graphics cards if the drivers are essentially the same.
I would like to see enough information on the spec sheets for the integrated graphics so that I can decide what models of graphics cards I can buy so that Windows will work with my new card as well as the on-board graphics.
The spec sheet says Radeon but I think that there are many options in the Radeon family.
Thanks

Quote
This is request for MSI
Nice, but this is a Users-to-Users Forum so you are wrong here if an official MSI answer is wanted. >>How to contact MSI.<<
Quote
Recent versions of Windows can only support multiple graphics cards if the drivers are essentially the same.
What? Where have you read that. How should different vga adapters have the same driver. Windows 7 can handle different vga drivers

Step by Step Guide Details for RFC to File and File to RFC scenario

Hi Guru's
Good day to you. I am tyring to develop some scenarios based on RFC adaptor. so i want to start up with basic scenarios like RFC to File scenario(Here i just want to pull some data from SAP using RFC and put it in destination folder as an text file) and FILE to RFC scenario (Here i just want to take some data from the file and update into SAP).
For doing these scenarios i would like to request you people to send me the step by step guide which explains me about the complete steps of configurations required to do the RFC to FILE scenario and FILE to RFC scenario.
I found some scenarios and i am in confused state. so i request you to please put your experience to help me out.
thanks in advance.
Regards
Raj

Hi Aaron,
I don't know your scenario and your ECC and PI versions but I learned how to use ABAP Proxy more than 1 year ago with the following tutorial:
Edit--> The forum doesn't allow me to post external link, just search "ABAP Proxy Communication Scenario" in google and visit the 1st result
The way to develop ABAP Proxys has changed a little if your PI is 7.1. In the ECC side, the transaction SPROXY looks much better too if you have a recent version of the ECC.
Edited by: Marshal on Oct 8, 2009 5:08 PM
I've found that SDN Document. Maybe the scenario is not the most simple to start with ABAP Proxy but is very well documented and is for PI 7.1. The document also handles the inbound and outbound proxys
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c00ca32e-f991-2b10-f5be-97114bd2b08f&overridelayout=true]
Edited by: Marshal on Oct 8, 2009 5:22 PM

HT204266 Payment method declined, I've just entered details for a new MasterCard and still get the same message, frustrated as I cannot download apps!!!!!!

Payment method declined, I've entered in a new MasterCard after I got the payment declined message with my old MasterCard but still get same message with new card and I cannot download apps, someone pls help

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

Support detail for windows 7 licence key

Dear Microsoft i am Your Coustemer And I Am Using Windows 7 Ultimate Licence Bt I Have One Problem To Activate My licence Copy Becos I Forget My Licence Key Soo Please Give me Proper Soluction To Activate My Licence. I Have A Product Id Of My Licence copy
Soo As Soon As Eairliar Soluction
From
Nirav Shah.

did u at any stage try using partition magic or any similar programs? did u install any patches previously that relates to extending and/or shrinking partitions?
Here is a long drawn out forum thread about MBR - i can't be bothered to read through the whole lot at the moment, but it might help you to get your head around it and also where I am coming from.
http://www.msfn.org/board/hp-notebook-recovery-partition-could-not-found-t131620-page-40.html
mbr is the pre-install master boot record...
In all respect, here's what you should try to do - mind you this is no guarentee it will work and any damage you might cause is not my responsibility...
if you have the original vista recovery disks, i would then do the vista recovery first, and then try the upgrade again. if that fails again then you probably want to instead try to do a win 7 clean install...
HP ENVY 17-j005tx Notebook, HP ENVY Recline 27-k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server, HP MediaVault 2020, HP ENVY 120 AiO Printer

Supporting detail disappeared and the could not edit

We have a planning app (v 11.1.2.2) and one user told me he entered some data into supporting detail for one cell. After he save it and the cell data became 0. And he could not edit that cell anymore. Tried to editing supporting edit for that cell brought back a blank page. I tried that cell and although the data is 0 and I could not update supporting detail either. It just brings a blank page for supporting detail. User can still enter and edit supporting details for other cells. I can think of a couple things to do:
1. Check the relational db and delete the supporting detail for that cell.
2. Restart Planning services to see if that fixes it.
But before I do that, I want to know if anyone of you encounter the same thing or not. And is there any other way to fix that.
Thanks

Thanks! That icon color is barely visible. I never noticed it was there! I need to change it to more contrast color.

HT3702 I want to canx an app called MR , a room mate authorized it and now im paying for it so I want to cancel , dont wanna change my credit card details for 1 stupid App

I want to canx an app called MR , a room mate authorized it and now im paying for it so I want to cancel , dont wanna change my credit card details for 1 stupid App

Purchasing and managing auto-renewing subscriptions -
http://support.apple.com/kb/HT4098

AS2 adpater-- Configuration details for both SND and RCV.

Hi All,
I need some details for both AS2 sender and receiver adapter.
Sender AS2 adapter :
1. Use Proxy
      Use Authentication
Which one we need to use?
2. what is this Proxy Realm or Authentication Realm??
3. Whether we need to enable Hostname check & HTTP keep alive? what is the purpose of these settings?
4. what is this Message subject ?? the content of this comes from the file name or file data?
5. Server certificate and private key authentication?? do we need to get these from partner system??
Receiver AS2 adapter :
1. Here also the same question when we need to use Proxy settings and when we need to use Authentication settings.
2. Dynamic attributes??
     Use dynamic attributes
     Use non-empty attributes.
What are the information we need to ask partner system to get the connection??
Please reply if anyone worked on these AS2 settings.
Thank You.
Regards
Krupakar.

hi..
Sender Adapter..
1.You can use both use proxy and use authentication.depends upon the requirement.
when you use proxy you have to give proxy server name and all parameters.That means proxy server acts like your actual server.To pass this data through the AS2 apdapter U hv to specify th following parameters.
Proxy Server : Your proxy server.
Proxy Port :The port of the proxy server.
Proxy User: User for optional authentication.
Proxy Password: Password for optional authentication.
Proxy Realm: Realm for optional authentication.
2. REALM
A realm is a part of Yanel which has its own configuration and repository. This allows you to run several subsites (which are independent of one another) in a single Yanel instance. For example, each department in your company can have its own realm. This allows one department to use its database as a content repository and another to use the filesystem to provide the content to Yanel
So proxy realm means u r authorized to use the proxy server
You use Use Authentication for -
>Used to enable/disable basic authentication.
Use Authentication Used to enable/disable basic authentication.
User: User for basic authentication.
Password: Password for basic authentication.
Realm: Realm for basic authentication.
3. if u check these options for the following purpose.
SSL Hostname Check: Validate common name with server name.
HTTP Timeout:Timeout in seconds for waiting for server
response.
4.Message Subject: This subject will be compared with the subject in the received message. This is used to find the
correct channel for the inbound message. Wildcards are allowed.Its the file data.
5. Your partne rwill provide u these details.
Receiver Adapter:
1.If u use the same in sender side then u hv to verify it again in the receiver system. Then only the communication is established.
3.u must have the AS2ID and the certificates.
THAnks
MAnas
reward points if helpful.

SQL Server versions Mainstream Support Dates for 2005 and 2008

What is the link to Microsft's official published Support dates for SQL Server 2005 and SQL server 2008.
There are several conflicting reports and am looking for the official MicroSoft link so it can be shared as needed.

Hello,
Please refer to following blogs
http://blogs.msdn.com/b/sqlreleaseservices/archive/2011/01/27/end-of-mainstream-support-for-sql-server-2005-and-end-of-service-pack-support-for-sql-server-2008-sp1.aspx
http://support.microsoft.com/lifecycle/search/?sort=PN&alpha=sql
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Add Suppporting Details for more than one periods at the same time for the same Account in Planning.

As we know, in planning form, we can add supporting details to one cell for the level 0 members intersections.
But can we do that as below:
add supporting details for more than one cells at the same time?
I tried to do that in workspace and smartview, neither is working.(my workspace version 11.1.2.2.300.20)
I wonder if i am not with the right version, because i don't know how to get the below.
Can any one explain?
Thank you.

Hi,
I have tried in Smartview for a simple form where my period dimension was in columns and accounts in rows.
You need to select multiple period and select supporting details, it will show those selected period for which you can add the supporting details.
You can add these details and then submit the data in the form.
Regards,
Sourabh

Support details for 10.1.2 and 10.1.3

Similar Messages

Maybe you are looking for