How to Suppress form default message

Hi I am having master-detail blocks in a form.
When i make changes in details block and try to go to master
record it is prompts me for to save changes or not?
I want to make the changes posted without prompting
In which trigger should i write the code.I cann't write in
post-block,when-validate-record.
Can Anybody Suggest me for a proper trigger.
Thanks in Adv
Sharath
null

SHARATH (guest) wrote:
: Hi I am having master-detail blocks in a form.
: When i make changes in details block and try to go to master
: record it is prompts me for to save changes or not?
: I want to make the changes posted without prompting
: In which trigger should i write the code.I cann't write in
: post-block,when-validate-record.
: Can Anybody Suggest me for a proper trigger.
: Thanks in Adv
: Sharath
hi sharath,
:system.message_level = 15;
set the ABOVE IN WHEN NEW FORM INSTANCE TRIGGER.
null

Similar Messages

Suppressing Forms Default Message

How do we suppress the default Oracle Forms Message
"Count: *(No of records), "Replace" etc which is displayed in the bottom of the Default Window. (Forms 4.5)
Thx in advance.

under forms properties set the console window to NULL and you won't have ANY message lines.

How to suppress forms Message?

When I use NEW_FORM from within a form, before exiting the
current form it asks me to save the changes, how do I supress
this message?
I tried on-message, but doesn't work!
Any help is appreciated.
Thanks!
null

Dennis Bourgeois (guest) wrote:
: geek (guest) wrote:
: : When I use NEW_FORM from within a form, before exiting the
: : current form it asks me to save the changes, how do I supress
: : this message?
: : I tried on-message, but doesn't work!
: : Any help is appreciated.
: : Thanks!
: Here's a couple of ideas,
: - Try setting system.message level to a higher number (maybe
: 20) prior to calling your new form and then set it back when
the
: new form has been established.
: - Try using clear_form(NO_VALIDATE) just before calling your
new
: form.
: - Try using the on-error trigger instead of the on-message
: trigger
: Good luck.
Actually, the only way to "suppress" this message is to either
reset the :SYSTEM.FORM_STATUS or (much recommended) set the
message level to 25 and commit the form before the new_form.
After all, the reason for this message is that the user has
supposedly made changes to the data that need to be committed. If
you are getting this message w/o making changes, then you need to
check your code because something is setting a base table value.
null

How to suppress an error message

Hi all,
I would like to suppress an error message ORA-0000:normal; successful completion
How to do it.. if suppose I need to do it on the On-Error trigger.
Thanks

Hi,
IF Error_Code = 0000 THEN
NULL;
END IF;or if it is a message then use on-message trigger
IF Message_Code = 0000 THEN
NULL;
END IF;Danish

How to suppress the Warning messages while doing GR(MIGO)

Hi ALL,
I have a requirement while posting goods GR/GI using T-code MIGO.
Trying to do GR against PO using MIGO.After selecting the line item quantity and entering BATCH Number for line item Material when I click on 'CHECK' Pushbutton i am Getting the below Warning msg
'For batch RAB001 of material 1522582, no class could be determined'. Message no M7207.
How to suppress this above warning message, I want to Post the goods by suppressing the above warning message .
Like similarly while issuing the goods to the to the Production order using MIGO i am getting warning message when I click on 'CHECK' Pushbutton.
I do want to issue the goods by suppressing warning message in this case also.
I know this could be solved by customization but we are dealing with batch managed materials.
How to suppress the the above warning messages in MIGO through ABAP coding ...
Looking forward the helpfull answer.
Regards,
venky

Hi
Answer is pure assumption.
Pls check the following OSS notes
Note 319094 - Warning message during batch classification in IM
Note 122937 - UD: Error message M7207 when you save
Note 399416 - Message M7207 not analyzed in background
Note 786755 - You cannot suppress message M7 207
Note 201196 - MIGO: Error M7207 for goods receipt for batch
Pls take opinion from SAP / Basis before implementing the OSS note
Regards
Madhan D

How to Suppress a warning message in Reports

Hi All,
I am getting REP-32751: Warning: Some text segments are missing warning message when ever i open a report and also while run the report in the browser. I am not able to find the missing text segments. Is there any way to suppress this warning message in oracle reports 10g?. Please let me know.
Regards,
Prasad.

Just was curious and was in Metalink anyways and looked up your Error:
>
Another workaround: open the report under the desired NLS_LANG, and OK all the warning messages. Once the report is opened, save it (under a different name). This will fill out missing text segments with blanks,which is OK because these strings never appear in the report anyway (theyshould have been deleted...)

How to set a default message in "Share Invitation" dialog box

Hello,
Working on SharePoint Online, my customer would like to have a default message whenever he adds a new user in a group.
By default, when a user is added to a group, a text box appears with a greyed out text: "Include a personal message with this invitation (Optional)."
Is it possible to have a custom text message ?
Any help appreciated.
Patrick

This is not possible in SharePoint online because you can not have access to _layouts folder. This can be only possible in SharePoint on prem.
The dialog page name is _layouts/15/aclinv.aspx, as it loads from layout folder so you can not access the physical file SharePoint online.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer.

How can I change default message encoding in Mail?

In Lion, most of my email messages in Simplified Chinese is encoded in iso-2022-cn, while I want them in gb18030 or utf-8. Instead of choosing encoding manually every time, can I change the default message encoding somewhere?

I think the only reliable way to do something like you want is to include something like a Unicode dingbat (range 2700) as part of each message (i.e. in your signature). That will ensure it goes out as UTF-8.

How to suppress a warning message in BDC call transaction

Hi,
I was calling a BDC using CALL Transaction in mode N. But due to some warning messages the background job was not success. Please tell me how to overcome the warning messages in BDC.
Regards,
Satish

Hi tyr this way:
PERFORM bdc_dynpro      USING 'SAPMM07M' '0210'. " into the screen
      PERFORM bdc_field       USING 'BDC_CURSOR'           "cursor on the filed to update
                                    'DM07M-HSDAT_INPUT'.
      PERFORM bdc_field       USING 'DM07M-HSDAT_INPUT'   "assign values
                                     v_date.                                     "might get an warning so three enters...
      PERFORM bdc_field       USING 'BDC_OKCODE' " first enter
                                   '/00'.
      PERFORM bdc_field       USING 'BDC_OKCODE' "second enter
                                    '/00'.
      PERFORM bdc_field       USING 'BDC_OKCODE' "third enter
                                    '/00'.

How to suppres Forms Default Locking message with user freindly message?

Hi,
In general if the record being edited by current user is locked by another user working on the application, forms would give the dialog box 'Could not reserve record(2 tries). Keep trying?' Is there any way by which i can suppress this message and give user friendly message by capturing it in any trigger.
Please suggest me?
Seshu

You should be able to modify the message to whatever you like by using an ON-MESSAGE or an ON_ERROR trigger. Then when/if the error happens, the default Oracle error message will be replaced by your message. An example is included.
IF message_type = 'FRM' and message_code = 40350 then
     MESSAGE(WAREHOUSE ID NOT FOUND');
     MESSAGE(' ');
ELSIF message_type = 'FRM' and message_code = 40401 then
     NULL;
END IF;

Business Application Log how to suppress 'Number' of messages column

Dear SDN Members,
how is it possible to suppress the 'Number' column in a BAL output where the number of messages is printed?
Thanks and kind regards,
Cedrik

HI,
1. SERVERTHREADS does not contain/limit the count of sessions one can have .
2. Count of ports will help you decide what is the default SERVERTHREAD count , in your case its 20.
3. the count 20 signifies the number of threads which a transaction can use ( here threads are nothing by the operating system level threads, to do with the processes and processor).
4. If you have multiple transactions and you want to improve the performance of them ( in case of slow response or so). You can increase the thread count , to make more threads work for your transactions. Again , this does not limit the count of sessions .
5. I did not understand the obejctive behind limiting the sessions and avoiding users from accessing . I think , this defeats the whole purpose of having cubes then. You have many cubes ,and huge number of users who pull data and essbase and its kernel are capable of handling this . If you still want to restrcit, might as well set their security ( by letting them not to access cubes).
Hope this adds value
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

How to remove the default message in PDF generated through JRC?

Hi all,
I am in need of removing the default and automatic message(Register free at .... to remove this message) at the pdf footer has been generated while exporting a report through a java Program using JRC.
By how it is generated and how to customize the pdf?
Can anyone help me.
Thanks in advance,
Saravanakumar.

It doesn't work for me neither.
Tried many ways.
I followed the full instructions putting the jar in eclipse/plugins folder, restart eclipse.
Right click on the project, chose crystal report -> update keycode.
I edited the CRConfig.xml adding keycode tag with the value I copied from the jar.
None of above works.
Is there other ways to remove that line of message from the report?
thank you in advance.
Sean

How to use Forms Default Database Connection in java class

When a form based application is started, a connection is made with underlying database. This is the Default (Primay) Database Connection.
The problem is I have some of my business logic implemented in a java class. In this class I have to make a another connection with the same database. What I want to do is to use the original Database Connection in the java class. In this I may avoid the overhead of reconnection.
Could anyone pls guide me in this way...

you can't share the forms connection. Sorry :(

How to suppress n0: default Namespace prefix in Transformations

Hi,
I use Simple Transformations for serialization of deep structured data.
In the XML File the whole tree needs to use a special namespace. Therefore i use the attribute xmlns="ABC.de" without a namespace prefix in my root element. During serialization SAP generates a default namespace prefix like 'n0:'.
Is it possible to suppress the generated namespace prefix?
Thank you very much for reply
René
Edited by: René Libbert on Feb 14, 2012 8:09 AM

Maybe somebody is interested.
It seems to be a problem on old 640. On a NW 702 the result is as expected. NW 700 was not tested.
Workaround for the 640 is to use as result a STRING field not an XSTRING.
Greetings René

How i suppress the default link color?

Hi,

i have a little sql report, and i have coded the color for a column value in a function call. It looks like :

select format_html(col_x,5)
from mytable;

This function give me the following result:

---> select format_html(col_x,5) from syn
where rownum<10;
1 
2 
3 
4 
5 
<_font color="#dc143c">6</_font> 
<_font color="#dc143c">7</_font> 
<_font color="#dc143c">8</_font> 
<_font color="#dc143c">9</_font> 

Now all values > 5 have a different color. And this works fine.

But now i will link this column to an other page. And than the column has the default color for the link(wich is blue). How i can change this behavior, so the values have the color from the function and the links are only underlined?

Thanks for your help,
Maik

Hi Maik,
You can do something like the following:
In the region's Region Header for the report, add in:
<style>
.customlink:hover {color:red}
.customlink:active {color:yellow}
.customlink:link {color:purple}
.customlink:visited {color:green}
</style>
You can change "customlink" to whatever name you like and, obviously, pick your own colours.
Then in your SQL statement, add in a field that returns a stylename:
select field1,
field2,
CASE WHEN (test) THEN 'customlink' ELSE '' END STYLENAME,
etc
from etc
Then, in the link, in "Link Attributes", add in classname='#STYLENAME#'
Regards
Andy

How to Suppress form default message

Similar Messages

Maybe you are looking for