How to supress a message in background

Hi,
I have one workflow in whcih one task is there which is getting executed in Background.
There is one BAPI_SALESORDER_CHANGE. During debugging I found that this BAPI is throwing one information message and because of this message the TASK is not completed.
Could you please do let me know that how I can suppress this message in Back ground.
Regards,
Sandeep

Hello,
Try adding the exception ERROR_MESSAGE when calling the function module.
Add it after the normal exceptions and before OTHERS.
You only need to add this while calling the FM, and not in the FM itself
Details are given here
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db98ef35c111d1829f0000e829fbfe/content.htm

Similar Messages

How to supress informational messages

Is there a way to turn off the informational (yellow exclamation point in triangle) when creating/copying a new infotype record? The message is Record valid from date to date delimited at end. We are using WinShuttle scripts to load data changes but the yellow informational messages are causing problems in the recording scripts.

Hi David;
I do not know if it is possible to suppress all warning messages but I can suggest you to do some steps:
In table V_T582A remowe W from Maint.aft.leave, No org.assign. areas
And for time management infotypes reactions for collusions are configured under spro-Time Management-Time Data Recording and Administration-Specify System Reaction to Overlapping Time Infotypes
Regards;
Okan

How to supress timeout messages in SAP Syslog?

Hi!
We are using ECC6 with internal ITS. No we have many warnings in syslog which are not useful for us. Is there a way to get rid of them?
Example:
Zeit Typ Nr Mdt Benutzer TCode Prio. Geb N Text
12:01:12 DIA 001 001 OSTORE_WI ZWW2 R2 G HTTP/RFC-Session wurde nach Timeout gelöscht
Regards
Juergen

Check SAP Note 1240156 - Suppressing system log entries for plug-in timeout

Kitkat upgrade is the worst ever. I hate the messaging white background. I hate the white blinking light that is so very small you cannot tell if you have messages. My phone plays music every minute. I can't find how to disable this feature. I get hundr

I hate the new KitKat upgrade. I hate the messaging white background. I hate the loss of the green blinking light in the left upper corner. I do not know why music plays whenever I get an email. I get hundreds of emails to my device and it plays music and is driving me crazy. How do I disable this? I went through all my settings and cannot find where this may be set. It's a bust if you ask me for the Android system. Booooo

An update should only improve your device performance mistygirl1209. I'm sorry to hear you don't like the aesthetics of the new OS. Although we work closely with manufacturers and OS developers, we don't produce the devices, operating systems or updates. I want to help you fix the email issue. What make and model device is this? What type of music are you referring to? What type of emails are these? Are there attachments in them?
JonathanK_VZW
VZWSupport
Follow Us on Twitter@VZWSupport

Supress warning message in Session background process

Hi All,
I am facing a problem while executing a session in background process. The OK_CODE will disappear while the warning message appears in the status bar and the session will error out.
Pl. help me in suppressing the warning message and continue the next screens to post the document succsessfully. The TCode I am working is 'C201'.
Thanks in advance

Hi prakash,
1. While we run the session in foreground,
   WARNING message will come on screen,
   and then we have to press ENTER,
   to proceed further.
2. But when this same session, run in background,
   it does not get PAUSED,
   bcos of WARNING message.
(it gets paused only due to ERROR Message, and not for Warning/Info message)
3. So not to worry about the warning messages, in background.
regards,
amit m.

How to change the message value in COGI entry

Hi All,
I have two COGI records on a material for a plant and while creating those entries those were locked by another user. So it is getting message number as 897 and so it is not displaying in the report COGI.
Could anybody tell me, how to remove that message.
Thanks,
sreenivas.

Sreenivas,
You need to Implement the corrections mentioned in SAP Notes #325105.
Solution as given in note
Both incorrect goods movements and future change records for background processing of goods movements are stored in table AFFW. Error records differ from future change records by the fact that fields AFFW-MSGID and AFFW-MSGNO are filled (error ID and error number). Process requests can only be updated via reports CORUAFW0, CORUAFWP, CORUPROC or Transaction CO1P. Error records can be updated in Transaction COGI. They are also transferred to the update, provided you executed reports CORUAFWP or CORUPROC with the "Incl. incorrect goods movement" indicator set.
In table TAFWD, you can enter specific error messages which should not be treated as an error record but as process requests.Useful candidates for such error messages are, for example, locking errors such as M3897:"The plant data of the material <XXX> is locked by the user <YYY>." You can maintain TAFWD entries by using Transaction SM31.
AFFW records with errors which are entered in table TAFWD are no longer displayed in Transaction COGI (because they have been defined as a future change record) and can only be edited for the background processing by the programs and transactions.
You can limit the error records to specific error messages in Transaction COGI by adding certain error messages to table TAFWD.
Technically, the conversion of error records into process requests decreases the time and effort spent on lock management because only the respective process (background updating of goods issues and/or goods receipts) is locked during the update of process requests.However, error records are locked separately in order to prevent other users from affecting a record which is just being updated/processed.
The following applies to postprocessing records from the repetitive manufacturing:
As of Release 4.5B, these records can also be posted via transaction COGI (in addition to the repetitive manufacturing programs for postprocessing backlogs: Transaction MF47, report RMSERI13). However, basically they should NOT be posted using reports CORUAFWP and CORUPROC, including not with the "with incorrect goods movements" indicator set.
Therefore, the definition of phantom errors in table TAFWDfor postprocessing records from the repetitive manufacturing has no effect. These records can not be redefined for future change records and must still be able to be postprocessed explicitly via transaction COGI.
Regards,
Prasobh

Supressing warning messages

Hi,
Whenever we create a condition, warning messages appear while running the query like ' condition created on..'
How to supress those warning messages.
Regards

Hi,
Go to RSRT t.code , give your query name and there will be icon called 'message' in the top, click over there and then click 'others' button in left hand side and you will find a warning message with message no in righthand side ..
You can checkmark the box which you doesn't want to display in the query and save it.
Regards,
Siva.

How to retrive archived messages in sxmb_moni

Hi,
My client want to see specific date archive messages, how to see those messages in SXMB_MONI window. Let me know any standard program and procedure. I am using PI 7.0 version SP19.

Follow the below to activate your infostructure,then you should be able to see archived messages.
1. start SXMB_ADM
2. choose Schedule archiving jobs
3. click "Archive management"
4. click "Information System"
5. click "Customizing"
6. choose "Archive Infostructure" for Object "BC_XMB" and activate it by clicking on "Activate" button.
7. go back and click on "Status".
8. click on "Status per Infostructure"
9. select your object "SAP_BC_XMB" and click "Fill Structures"
10. run it as a background task
Thanks
Aamir

Supress error message in reports 6i

I am brand new to reports.
I validate a date parameter in the AFTerFormParmater. If the
date is null (blanked out) I want to issue an srw error message
and reset the date on the form to a default.
I get the my srw error message but
then I also get a system error message about the "trigger failed"
how can I supress this message
in addition - how can I reset the date so it is not blank when
the parameter form is redisplayed.
I cannot run the report from a normal form as I have not taken'
the forms class yet. Everything needs to be done from reports
itself.

Hi Dhananjaya,
also check this.
Messages allow you to communicate with users from your programs. They are mainly used when the user has made an invalid entry on a screen.
To send messages from a program, you must link it to a message class. Each message class has an ID, and usually contains a whole set of message. Each message has a single line of text, and may contain placeholders for variables.
All messages are stored in table T100. You create and edit them using Transaction SE91. Once you have created a message, you can use it in the MESSAGE statement in a program.
Also,
In SE91, you can see all the error message details.
For information, if the error message shows "V10222", you have enter the first three digits in "Message Class" and last three in "Number". This means, whatever the message number is, the last three digits has to be entered in "Number" and the value precedes this last three numeric value has to be entered in Message Class.
And finally,
Let me put it this way..
Every Error Message belongs to a Message Class.
So, a particular Message Class will have a number of Messages under it.
You need to know the Message class first. For Sales we have the following message classes V1, V10, V2, V4, V5, VD, VU, VV, VX, WVA
*If you want to know all the message classes available for a transaction:-*
For knowing all the Message Classes for a particular transaction, you goto-->SE93, put the transaction code and choose display. After this, there is a button on the top (Display Object List), press that button. On the left hand side you will get the Object Name-(example: VA in case of sales). Drop down there and choose Message Classes. You will get all the message classes there.
If you know the Message Class and want to see the Messages under it:
So, goto-->SE91, put the message class and choose Display
cheers,
Hema.

How to supress dialog pop

Hi,
I am displaying the error message with pop-up window in 3.1i version from F4 help.The window is not closing properly, when i click on enter button in pop-up window. Still it is showing with small icon of the
pop-up.
Can any body let me know the how to supress pop-up window?
Regards,
Suresh KUmar.

Hi,
I am not using any "POP UP" function module. Simply using the message "E". As i mentioned in my thread (Using 3.1i version).
Regards,
Suresh Kumar.

Message when background Job is successful .. information

Dear All
I just want to give an information message when background job is successful.
I am starting a job using SUBMIT < > AND RETURN
if sy-subrc = 0
CALL FUNCTION 'JOB_CLOSE'
if sy-subrc <> 0
Do Nothing
else
message <>
end if.
end if.
Let me know if above code is correct and how to make a message information only in this.
Amol

Hi Amol,
I'm struggling to fully follow your requirements, but the job is not complete when you call the function 'JOB_CLOSE'.
You can check if the background job is successful using the method below...
Within a DO-ENDDO use the function module 'BDL_READ_JOB_STATUS' passing it job name and job number.
If the job status returned from 'BDL_READ_JOB_STATUS' = 'F' then the job is finished and exit the DO-ENDDO.
Kind Regards,
Richard.

How to suppress forms Message?

When I use NEW_FORM from within a form, before exiting the
current form it asks me to save the changes, how do I supress
this message?
I tried on-message, but doesn't work!
Any help is appreciated.
Thanks!
null

Dennis Bourgeois (guest) wrote:
: geek (guest) wrote:
: : When I use NEW_FORM from within a form, before exiting the
: : current form it asks me to save the changes, how do I supress
: : this message?
: : I tried on-message, but doesn't work!
: : Any help is appreciated.
: : Thanks!
: Here's a couple of ideas,
: - Try setting system.message level to a higher number (maybe
: 20) prior to calling your new form and then set it back when
the
: new form has been established.
: - Try using clear_form(NO_VALIDATE) just before calling your
new
: form.
: - Try using the on-error trigger instead of the on-message
: trigger
: Good luck.
Actually, the only way to "suppress" this message is to either
reset the :SYSTEM.FORM_STATUS or (much recommended) set the
message level to 25 and commit the form before the new_form.
After all, the reason for this message is that the user has
supposedly made changes to the data that need to be committed. If
you are getting this message w/o making changes, then you need to
check your code because something is setting a base table value.
null

How to suppress IDOC message

Hi
I am calling an outbound transaction CC92 for change master from RFC. Now once IDOC gets created i get a message that IDOC created.
Now i do not want this pop up. How do i suppress this message pop up.
Edited by: Rohit Kadage on Dec 15, 2008 8:23 PM

Dennis Bourgeois (guest) wrote:
: geek (guest) wrote:
: : When I use NEW_FORM from within a form, before exiting the
: : current form it asks me to save the changes, how do I supress
: : this message?
: : I tried on-message, but doesn't work!
: : Any help is appreciated.
: : Thanks!
: Here's a couple of ideas,
: - Try setting system.message level to a higher number (maybe
: 20) prior to calling your new form and then set it back when
the
: new form has been established.
: - Try using clear_form(NO_VALIDATE) just before calling your
new
: form.
: - Try using the on-error trigger instead of the on-message
: trigger
: Good luck.
Actually, the only way to "suppress" this message is to either
reset the :SYSTEM.FORM_STATUS or (much recommended) set the
message level to 25 and commit the form before the new_form.
After all, the reason for this message is that the user has
supposedly made changes to the data that need to be committed. If
you are getting this message w/o making changes, then you need to
check your code because something is setting a base table value.
null

Supress/Prevent messages from FM call

Hi all,
In my program, I have a function module call,
during an error inside the FM, an Information message pops up.
I'd like to stop this from happening.
The FM is not RFC-enabled so I can't use 'IN BACKGROUND TASK'.
Also, Im not allowed to change the FM
nor am I allowed to create a copy of the FM (...then change the message).
How can I prevent messages from showing or popping up?
Can I use a variation of MESSAGES INTO or something else.
Is there a way to hardcode setting to run in background?
Or atleast any ways to suppress/prevent messages from the FM.
Thanks all!

when calling the FM adopt your call with following exception:
error_message = any free number, e.G. 9.
That will have following effect:
If the error_message addition is specified after EXCEPTIONS, all MESSAGE statements that are executed during the processing of the function module and do not have the RAISING addition are affected as follows:
Messages of the type S, I, or W are not sent but are noted in the log background processing.
Messages of the type E and A trigger the exception error_message and set sy-subrc to n_error. The message class, message type, message number, and the contents of possible placeholders for the MESSAGE statement are in the fields sy-msgid, sy-msgno, sy-msgty, and sy-msgv1, ... , sy-msgv4. With messages of the type A, the ROLLBACK WORK statement is also explicitly executed.
Messages of the type X are not influenced. As always, they cause program termination with a short dump

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat.

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated.

How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated.

How to supress a message in background

Similar Messages

Maybe you are looking for