How to switch of messages from Microsoft outlook taht i get when updating outlook calendar from Access 2010

Hi.
I want to avoid irritating messages from Microsoft outlook when I am sending invitations to a meeting from Access 2010 into outlook.
We are running a CRM application on a terminal server.
I get theese messages: "A program is trying to automatically send e-mail on your behalf. Do you want to allow this..."
A program is trying to access mail adresses you have stored in outlook". Do you want to allow this..."
How can I avoid theese messages? They are irritating for our useres.
I hope anyone have a solution to this problem?

Hi,
How did you send invitations to a meeting from Access 2010 into outlook?
These security warnings appear when a program attempts to access your contact information in the Outlook Address Book, or attempts to send email on your behalf. Please refer to the following article and try the resolution
described to check the result.
http://office.microsoft.com/en-in/outlook-help/i-get-warnings-about-a-program-accessing-email-address-information-or-sending-email-on-my-behalf-HA010355062.aspx?CTT=1
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

Similar Messages

How to switch between messages in the BlackBerry Hub

With the release of BlackBerry 10 version 10.1, we’ve added a new gesture to the BlackBerry Hub that allows you to quickly switch between your next and previous messages. It’s simple: while viewing a message drag your finger from the left to the right and in one continuous motion swipe up or down.
For example, in the following screenshot you’ll notice I am viewing ‘Test 08”. To get to the next message, “Test 09”, all I need to do is swipe from left to right (red arrow) followed by swiping up (green arrow) in a single motion. To switch to the previous message, “Test 07”, I complete the same gesture, but swipe down instead (blue arrow).
Tip: Using a BlackBerry Q10 or Q5? On top of using this gesture to switch between messages, you also have the option of pressing the N key to view your next message, or the P key to view a previous message.
If this gesture doesn’t appear to be working on your device, verify you are using BlackBerry 10.1.0.4181 or later by going to Settings > About and reviewing the OS Version field. If the OS Version is lower than 10.1.0.4181, check for updates by going to Settings > Software Updates.
For more details about the availability of BlackBerry 10.1, check out Inside BlackBerry’s post on BlackBerry 10 Software Updates.
VIA | helpblog.blackberry.com
http://helpblog.blackberry.com/2013/10/how-to-switch-between-messages-in-the-blackberry-hub/
Please thank those who help you by clicking the button.
If your issue has been solved, please resolve it by marking "Accept as Solution"

I would set up a variable before you get to that node, lets call it $EmpID and assign to it the value of the prompt you want to play lets say 12345 which would be the library promptID. It will then play prompt, get digits, and once you validate if it goes through the expression that flags it as invalid, in that node re-declare the variable, but this time give it the value of the new prompt you want to play, then sent it back to the node which will then play the new prompt and collect the digits.

HT5622 my apple id is not working when i sign in from my laptop it works but when i sign in from my iphone4 then its not working it gives the message of "your aapleid or password is incorrect"? how can i solve this problem please help

my apple id is not working when i sign in from my laptop it works but when i sign in from my iphone4 then its not working it gives the message of "your aapleid or password is incorrect"? how can i solve this problem please help

Hey nocillado,
Thanks for using Apple Support Communities.
It sounds like you have 2 things you want to address. These articles can help you use iCloud with your existing Apple ID.
Get help activating your iPhone
http://support.apple.com/kb/ts3424
Using your Apple ID for Apple services
http://support.apple.com/kb/ht4895
Using the same Apple ID for Store purchases and iCloud (recommended)
Have a nice day,
Mario

How to get an updatable ADODB Recordset from a Stored Procedure?

In VB6 I have this code to get a disconnected ADODB Recordset from a Oracle 9i database (the Oracle Client is 10g):
Dim conSQL As ADODB.Connection
Dim comSQL As ADODB.Command
Dim recSQL As ADODB.Recordset
Set conSQL = New ADODB.Connection
With conSQL
.ConnectionString = "Provider=OraOLEDB.Oracle;Password=<pwd>;Persist Security Info=True;User ID=<uid>;Data Source=<dsn>"
.CursorLocation = adUseClientBatch
.Open
End With
Set comSQL = New ADODB.Command
With comSQL
.ActiveConnection = conSQL
.CommandType = adCmdStoredProc
.CommandText = "P_PARAM.GETALLPARAM"
.Properties("PLSQLRSet").Value = True
End With
Set recSQL = New ADODB.Recordset
With recSQL
Set .Source = comSQL
.CursorLocation = adUseClient
.CursorType = adOpenStatic
.LockType = adLockBatchOptimistic
.Open
.ActiveConnection = Nothing
End With
The PL/SQL Procedure is returning a REF CURSOR like this:
PROCEDURE GetAllParam(op_PARAMRecCur IN OUT P_PARAM.PARAMRecCur)
IS
BEGIN
OPEN op_PARAMRecCur FOR
SELECT *
FROM PARAM
ORDER BY ANNPARAM DESC;
END GetAllParam;
When I try to update some values in the ADODB Recordset (still disconnected), I get the following error:
Err.Description: Multiple-step operation generated errors. Check each status value.
Err.Number: -2147217887 (80040E21)
Err.Source: Microsoft Cursor Engine
The following properties on the Command object doesn't change anything:
.Properties("IRowsetChange") = True
.Properties("Updatability") = 7
How can I get an updatable ADODB Recordset from a Stored Procedure?

4 years later...
I was having then same problem.
Finally, I've found how to "touch" the requierd bits.
Obviously, it's hardcore, but since some stupid at microsoft cannot understand the use of a disconnected recordset in the real world, there is no other choice.
Reference: http://download.microsoft.com/downlo...MS-ADTG%5D.pdf
http://msdn.microsoft.com/en-us/library/cc221950.aspx
http://www.xtremevbtalk.com/showthread.php?t=165799
Solution (VB6):
<pre>
Dim Rst As Recordset
Rst.Open "select 1 as C1, '5CHARS' as C5, sysdate as C6, NVL(null,15) as C7, null as C8 from DUAL", yourconnection, adOpenKeyset, adLockBatchOptimistic
Set Rst.ActiveConnection = Nothing
Dim S As New ADODB.Stream
Rst.Save S, adPersistADTG
Rst.Close
Set Rst = Nothing
With S
'Debug.Print .Size
Dim Bytes() As Byte
Dim WordVal As Integer
Dim LongVal As Long
Bytes = .Read(2)
If Bytes(0) <> 1 Then Err.Raise 5, , "ADTG byte 0, se esperaba: 1 (header)"
.Position = 2 + Bytes(1)
Bytes = .Read(3)
If Bytes(0) <> 2 Then Err.Raise 5, , "ADTG byte 9, se esperaba: 2 (handler)"
LongVal = Bytes(1) + Bytes(2) * 256 ' handler size
.Position = .Position + LongVal
Bytes = .Read(3)
If Bytes(0) <> 3 Then Err.Raise 5, , "ADTG, se esperaba: 3 (result descriptor)"
LongVal = Bytes(1) + Bytes(2) * 256 ' result descriptor size
.Position = .Position + LongVal
Bytes = .Read(3)
If Bytes(0) <> 16 Then Err.Raise 5, , "ADTG, se esperaba: 16 (adtgRecordSetContext)"
LongVal = Bytes(1) + Bytes(2) * 256 ' token size
.Position = .Position + LongVal
Bytes = .Read(3)
If Bytes(0) <> 5 Then Err.Raise 5, , "ADTG, se esperaba: 5 (adtgTableDescriptor)"
LongVal = Bytes(1) + Bytes(2) * 256 ' token size
.Position = .Position + LongVal
Bytes = .Read(1)
If Bytes(0) <> 6 Then Err.Raise 5, , "ADTG, se esperaba: 6 (adtgTokenColumnDescriptor)"
Do ' For each Field
Bytes = .Read(2)
LongVal = Bytes(0) + Bytes(1) * 256 ' token size
Dim NextTokenPos As Long
NextTokenPos = .Position + LongVal
Dim PresenceMap As Long
Bytes = .Read(3)
PresenceMap = Val("&H" & Right$("0" & Hex$(Bytes(0)), 2) & Right$("0" & Hex$(Bytes(1)), 2) & Right$("0" & Hex$(Bytes(2)), 2))
Bytes = .Read(2) 'ColumnOrdinal
'WordVal = Val("&H" & Right$("0" & Hex$(Bytes(0)), 2) & Right$("0" & Hex$(bytes(1)), 2))
'Aca pueden venir: friendly_columnname, basetable_ordinal,basetab_column_ordinal,basetab_colname
If PresenceMap And &H800000 Then 'friendly_columnname
Bytes = .Read(2) 'Size
LongVal = Bytes(0) + Bytes(1) * 256 ' Size
.Position = .Position + LongVal * 2 '*2 debido a UNICODE
End If
If PresenceMap And &H400000 Then 'basetable_ordinal
.Position = .Position + 2 ' 2 bytes
End If
If PresenceMap And &H200000 Then 'basetab_column_ordinal
.Position = .Position + 2 ' 2 bytes
End If
If PresenceMap And &H100000 Then 'basetab_colname
Bytes = .Read(2) 'Size
LongVal = Bytes(0) + Bytes(1) * 256 ' Size
.Position = .Position + LongVal * 2 '*2 debido a UNICODE
End If
Bytes = .Read(2) 'adtgColumnDBType
'WordVal = Val("&H" & Right$("0" & Hex$(Bytes(0)), 2) & Right$("0" & Hex$(bytes(1)), 2))
Bytes = .Read(4) 'adtgColumnMaxLength
'LongVal = Val("&H" & Right$("0" & Hex$(Bytes(3)), 2) & Right$("0" & Hex$(Bytes(2)), 2) & Right$("0" & Hex$(Bytes(1)), 2) & Right$("0" & Hex$(Bytes(0)), 2))
Bytes = .Read(4) 'Precision
'LongVal = Val("&H" & Right$("0" & Hex$(Bytes(3)), 2) & Right$("0" & Hex$(Bytes(2)), 2) & Right$("0" & Hex$(Bytes(1)), 2) & Right$("0" & Hex$(Bytes(0)), 2))
Bytes = .Read(4) 'Scale
'LongVal = Val("&H" & Right$("0" & Hex$(Bytes(3)), 2) & Right$("0" & Hex$(Bytes(2)), 2) & Right$("0" & Hex$(Bytes(1)), 2) & Right$("0" & Hex$(Bytes(0)), 2))
Dim ColumnFlags() As Byte, NewFlag0 As Byte
ColumnFlags = .Read(1) 'DBCOLUMNFLAGS, First Byte only (DBCOLUMNFLAGS=4 bytes total)
NewFlag0 = ColumnFlags(0)
If (NewFlag0 And &H4) = 0 Then 'DBCOLUMNFLAGS_WRITE (bit 2) esta OFF
'Lo pongo en ON, ya que quiero escribir esta columna LOCALMENTE en el rst DESCONECTADO
NewFlag0 = (NewFlag0 Or &H4)
End If
If (NewFlag0 And &H8) <> 0 Then 'DBCOLUMNFLAGS_WRITEUNKNOWN (bit 3) esta ON
'Lo pongo en OFF, ya que no me importa si NO sabes si se puede updatear no, yo lo se, no te preocupes
'ya que quiero escribir esta columna LOCALMENTE en el rst DESCONECTADO
NewFlag0 = (NewFlag0 And Not &H8)
End If
If (NewFlag0 And &H20) <> 0 Then 'DBCOLUMNFLAGS_ISNULLABLE (bit 5) esta OFF
'Lo pongo en ON, ya que siendo un RST DESCONECTADO, si le quiero poner NULL, le pongo y listo
NewFlag0 = (NewFlag0 Or &H20)
End If
If NewFlag0 <> ColumnFlags(0) Then
ColumnFlags(0) = NewFlag0
.Position = .Position - 1
.Write ColumnFlags
End If
.Position = NextTokenPos
Bytes = .Read(1)
Loop While Bytes(0) = 6
'Reconstruyo el Rst desde el stream
S.Position = 0
Set Rst = New Recordset
Rst.Open S
End With
'TEST IT
On Error Resume Next
Rst!C1 = 15
Rst!C5 = "MUCHOS CHARS"
Rst!C7 = 23423
If Err.Number = 0 Then
MsgBox "OK"
Else
MsgBox Err.Description
End If
</pre>

How do I set a new account as default in safari when I send emails from a web page

how do I set a new account as default in safari when I send emails from a web page
thanks in advance

In the Composing pane of Mail's preferences window, look for the pop-up menu labeled "Send new messages from." Select the desired account there.
Note, though, that this won't change the behavior when replying to a message... in that case, the reply will be sent from the account that received the message, unless you specify differently at that time.

How to give error message for the screen element text field when wrong i/p

How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar Shukla

Hi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla,

"Error check activation" is the message I get when pulling a book from the library. My computer is authorized (per the ADE screen) I have tried un-authorrzing and re-authorizing but nothing works. Please help

"Error check activation" is the message I get when pulling a book from the library. My computer is authorized (per the ADE screen) I have tried un-authorrzing and re-authorizing but nothing works. Please help

I am having the same problem, and my computer is authorized through my Adobe ID and I cannot open any books. I tried downloading a book from the university library, using my ID, the book is in ACSM format, and I cannot open the book because it keeps telling me
"error check activation" I am including screen shots to show my computer is authorized.

When updating via iTunes from 7.0.2 to iOS 8 was error -1.

When updating via iTunes from 7.0.2 to iOS 8 was error -1. It saids to me that i need to restore my iPad to factory settings. But i have too many images needed to me. I have no restores (but iTunes make one before updating). How i can to restore my photos?
iPad mini, 16Gb
A1432

Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.

Error 1602 when updating Iphone 4 from 4.3 to 5.. Any help ?

Error 1602 when updating Iphone 4 from 4.3 to 5 and after that it goes into "recovery mode" but Its not recognized by Itunes, I can only exit it with Tinyumrella and nothing else.

It seems that the itunes program has some interfefence when contacting the apple server.
i had this problem gave me error message 3200, i turned off the anti virus after restarting the computer(windows vista) and restarting the phone.
Turned off the sidebar, and closed any programs in the notifications section such as nokia ovi etc which load up when the computer starts also skype.
ha presto it began the process of transfering the file to the iphone4 and has now fully updated
hope that helps
leon

How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain

How does this happen: The picture of recent apps you get when double clicking the home button showed in Settings-Wifi that I had been connected to a network I have not been near for two months. Its not a recent "image" of Settings-Wifi. Can anyone explain?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

HT3939 i purchased iphone 5c from ebay india . after 35 days i updated software n from that day phone battry is not workin well , getting dry in 4 hrs . i m reaaly ****** with phone performace , please help or suggest

i purchased iphone 5c from ebay india . after 35 days i updated software n from that day phone battry is not workin well , getting dry in 4 hrs . i m reaaly ****** with phone performace , please help or suggest

Ebay is not an official reseller. Return it if you can for a refund.
Basic troubleshooting from the Users Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

I migrated a user from another mac and cant get any updates to install!

Hi
I migrated a user from another mac and cant get any updates to install, for example it says iPhoto is intalled but its not, i never copied it from the older imac, and i cant download it to this one now
any help appreciated

Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
If the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About

My hard drive crashed, and I got a new one. How do I get my contacts and calendar from my Iphone back into outlook?, my hard drive crashed, and I got a new one. How do I get my contacts and calendar from my Iphone back into outlook?

My hard drive crashed. I have all my contacts and calendar in my IPhone. I now have a new hard drive and am trying to get my contacts and calendar into the reinstalled outlook on my desktop but can't sync. Suggestions? Thanks

Well, let's hope that nothing was jiggled out of place when you were installing the new hard drive. Your optical drive may just be out of alignment or the disc you have is "dirty." Get a lint-free cloth and some rubbing alcohol, then clean the disc as thoroughly as you can starting from the center and working outward in a concentric circlular motion. See if that helps. In particular clean the inner portion well.
If this does not help, then you have a problem. You have opened the computer yourself. That action voids all support from Apple. If you take the computer in for service the store may refuse to service the computer. This is not related to your now expired warranty.

Update Gmail calendar from Outlook

Have edited Outlook 2002 calendar since initial export to Gmail. Can I do a new export to update current gmail calendar?

I have to export my calendar at work into my google calendar.
From my experience, Google calendar isn't smart enough to update a current appointment, it just adds the update as if it's new.
So unless you have something in your current Google calendar that won't get re-added by the updated Outlook, I would delete the current Google calendar, then export/import the updated Outlook calendar.

Error when updating the data from DSO to cube

Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
Annie

Hi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha

How to switch of messages from Microsoft outlook taht i get when updating outlook calendar from Access 2010

Similar Messages

Maybe you are looking for