How to switch repeat mode on?

I running 11.3.1.2 on Windows 8.1 64bit.
How to I turn on repeat mode?
The icon/button for this is not where Apples help pages say it is!
The only way I have found to do it is to switch on the menu bar and then go to Controls menu >> Repeat >> All.
This if fricking crazy!
Not to mention the fact that the Apple site is useless - I had to search just to find out how to change my password because logging in and editing profile/preferences clearly isn't it (like the rest of the internet) not Apple goes and makes a whole site just for managing your apple login with no link to it from the main site.

I think you'll find that it's working correctly. Presumably, the programmers have decided that if you choose to manually add a song to the Up Next Playlist - then that's what you want to hear next, which is why the repeat feature is turned off. Likewise, manually adding songs to the Up Next will turn off the Shuffle feature, until the manually added songs have been played.
Peter Row wrote:
This is not very good; often I just throw together a few tracks that fit my mood at the time I'm playing them and have that batch playing on repeat. Yes I could save it as playlist but the simple fact of the matter is that is an extra step that I shouldn't have to do.
Perhaps you simply need to accept that that is how it works. Surely the extra step would be worth it to you, wouldn't it?
Of course, it's possible that you only realise that you want to hear that sequence again once it has played. In that case, there is one tip you could try. When you discover a sequence of songs that you want to hear again, look in the Songs view and list the songs by Last Played. Select the group of songs you want and then create a Playllst from that group. Note that the default view in Last Played is in reverse, as shown in this first shot:
To put it in forward order, simply click on the Last Played column header to reverse the list, as shown in this next shot. Scroll down to the bottom of the list to find the most recent songs:
Lastly, highlight the songs you want and either create a new Playlist from the selection or add them to an existing list:
Yes, I know that's several steps, and you don't think you should be required to take even one extra step. The choice is yours to make, thanks to the exhaustive possibilities of iTunes.

Similar Messages

  • How to switch fullscreen mode with normal mode in OSMF with mediacontainer and mediaplayer?

    i use OSMF to make a video player ,use the mediacontainer and mediaplayer ,all works right but to switch from normal to fullscreen mode ,i don't know how ?
    because my videoplayer can be resized with some ratio ect 50%.
    anyone do something similar to this? any help?
    thanks very much!

    I did this:
    public function toggleFullScreen( event:Event=null ):void
    if( this.stage.displayState == StageDisplayState.NORMAL )
    // set full screen display
    this.stage.scaleMode = StageScaleMode.NO_SCALE;
    $playerInstance.width = $stage.fullScreenWidth;
    $playerInstance.height = $stage.fullScreenHeight;
    bg.height = $stage.fullScreenHeight;
    $playerInstance.addChild(controlBar2);
    LayoutMetadata($playerInstance.media.getMetadata(LayoutMetadata.LAYOUT_NAMESPACE)).scaleMo de= ScaleMode.ZOOM;
    var resultRect:Rectangle = new Rectangle(0, 0, $stage.fullScreenWidth, $stage.fullScreenHeight);
    stage.fullScreenSourceRect = resultRect;
    this.stage.displayState = StageDisplayState.FULL_SCREEN;
    else
    $playerInstance.width = 600;
    $playerInstance.height = 400;
    $playerInstance.mediaContainer.width = 600;
    $playerInstance.mediaContainer.height = 400;
    LayoutMetadata($playerInstance.media.getMetadata(LayoutMetadata.LAYOUT_NAMESPACE)).scaleMo de= ScaleMode.LETTERBOX;
    bg.height = 400;
    // set normal display
    stage.fullScreenSourceRect = null;
    this.stage.scaleMode = StageScaleMode.NO_SCALE;
    this.stage.displayState = StageDisplayState.NORMAL;

  • How to switch editing mode from PAL to NTSC on existing project?

    Hi,
    I'm editing some NTSC footage and half way through it I realized that I am editining in PAL mode. How can I switch my project editing mode to NTSC without loosing all my editing work? When I go to menu Project-Project Settings-General, the Editing Mode drop down for PAL, NTSC is grayed out.
    Thank you,
    Pavel.

    Brilliant.
    I have managed to scratch together the following Nikkors.
    All optics are clean and sharp.(I had some serviced) I am enjoying collecting as well as using them. Looking for an F2 85mm (manual focus now to complete the acquisition process)
    Nikkor 24mm AF f/2.8D 603947 2006
    Nikkor 28mm MF f/2.8 479495 1981
    Nikkor 35mm MF f/2.8 776970 1974-78
    Nikkor 50mm MF f/1.4 362602 1962>
    Nikkor 50mm MF f/2 3718402 1979
    Nikkor-P micro 55mm MF f/3.5 687849 1971-73
    Nikkor 105mm MF f/2.5 1009507 1981>
    Nikkor QC 135mm MF f/2/8 391789 1973>75
    Zooms:
    Nikkor 28- 85mm AF f/3.5 n.a 1986-90
    Nikkor 35 70mm MF f/3.3-4.5 2060284 1984>
    Nikkor 70- 210mm AF f/4-5.6 n.a 1987

  • How can switch night mode and add block mode

    i cant see night mode in mozilla

    hi, i'not sure what you are referring to by "night mode" - this is not something that is present in the normal firefox release channel, but the firefox developer edition does feature a dark theme: firefox.com/developer
    in order to block ads in firefox, you can use an extension like adblock:
    https://addons.mozilla.org/firefox/addon/adblock-plus/

  • MSI R9 290 How to switch between Gaming Modes?

    Hi, I just got a MSI R9 290... with Afterburner installed. This card has 3 preset modes that are supposed to be easy to switch between OC Mode 1007Mhz, Gaming 974Mhz, Silent 947Mhz... How do I switch between modes? I just tried to up the MHz in Afterburner and must have done something wrong, becuase I froze everything instalntly and had to reboot. Can someone please advise me how to switch between these modes? Do I have the right software installed, Afterburner or is there another suite specificly for this card? I did not install the card, and sorry I am a noob when it comes to OC. . . Noob to gaming in general, but I am getting some pretty bogus 30FPS on a 2012 game, LA Noire, which shouldnt even be demanding for t

    Quote from: kris.meaney on 07-March-15, 18:45:04
    This card has 3 preset modes that are supposed to be easy to switch between OC Mode 1007Mhz, Gaming 974Mhz, Silent 947Mhz... How do I switch between modes?
    You need the Gaming APP for switching (not Afterburner): http://download.msi.com/uti_exe/gamingApp.zip
    Afterburner is for manual overclocking (for advanced users) if not using the modes.

  • AS: how to switch between screen modes?

    hi @ all,
    does anybody know how to switch between the 4 screen modes in ps cs3?
    - standard
    - maximized
    - full screen with menubar
    - full screen
    I looked around but could not find anything discribing a way doing this by applescript.
    the only thread I found
    http://www.adobeforums.com/webx/.3bc85cba/0
    refers to javascript but I was not able to adopt it.
    thanks for any help
    Claus

    To do it with AS only, you need to simulate the "f" key with System Events:
    tell application "System Events"
      tell process "Adobe Photoshop CS3" to keystroke "f"
    end tell
    That will loop thought the screen modes as if you did it manually.
    To run the JS from the other thread, you need to use the "do javascript" command. Remember to escape all the quotes in the JS:
    tell application "Adobe Photoshop CS3"
      do javascript "var screenModeOptions = new Array(4);
         screenModeOptions[0] = \"screenModeStandard\";
         screenModeOptions[1] = \"screenModeMaximized\";
         screenModeOptions[2] = \"screenModeFullScreenWithMenubar\";
         screenModeOptions[3] = \"screenModeFullScreen\";
         applyScreenMode(screenModeOptions[0]);
         function applyScreenMode(mode){
          var desc = new ActionDescriptor();
          var ref = new ActionReference();
          var menuID = stringIDToTypeID( mode );
          ref.putEnumerated( charIDToTypeID( \"Mn  \" ), charIDToTypeID( \"MnIt\" ), menuID );
          desc.putReference( charIDToTypeID( \"null\" ), ref) ;
          executeAction( charIDToTypeID( \"slct\" ), desc, DialogModes.NO );
    end tell
    The JS is the better solution if you wanted to skip directly to the desired screen mode without looping through the others.
    Carl.

  • How to switch FM transmitter's mode from US to Europe?!

    I live ir Europe and I bought Griffin FM transmitter for iPod Nano, but I don't know how to switch it's mode from US to Europe! Could someone please tell me because I can't find that information in user's manual!
    iPod Nano 2GB   Windows XP Pro  

    Hi,
    I don't know where in Europe you are, but keep in mind that in some places (UK for example) the fm transmitters are currently illegal!
    Sorry I don't know how to answer your question. I previously used an an iTrip with my old 3G iPod in europe and it worked fine.
    Good Luck
    Macbook 1.83GHz 1GB   Mac OS X (10.4.6)   iPod Nano, iPod 3G 20GB

  • How to switch to maintenance mode in Webdispatcher

    Hi, everyone!
    Please tell me how to switch to maintenance mode in webdispatcher by shell scripts.
    I use Webdispatcher on HP-UX.
    Best Regards,
    Masahide Yano

    Hi Masahide
    I was able to write a script to do this.  Hopefully this helps others.
    First, I am assuming the web dispatcher is running with basic authentication. 
    The script did something similair to what wget would do,
    wget -user=<user> -pass=<password> http://<host>:<port>//wdisp/admin/icp/confirm.icp?what=change_maint&p1=1
    The problem with this is that you get a confirmation page.  This page has 3 form parameters, what, token, and p1.  The token is what you will need to extract to make the next call. 
    You then make a call to http://<host>:<port>//wdisp/admin/icp/do_action.icp, passing post parameters, what = "change_maint", token = <what you got from the previous call, and p1 = "1".  1 Enters maintenance mode, and 0 Enters running mode.
    I did this all with a PHP script, and the Snoopy class.  It works very nicely.
    We are also able to add and remove servers out of load balancing, using the same technique.
    Cheers
    Russell

  • How to set WRT54G v7 router so signal is forwardet- using bridge or repeater mode?

    What i need to set in WRT54G so its signal is beeing repeated?
    I want to use WRT54G v7 as to who internet comes in and it works like that right now and it has passw admin changed and WPA2 personal set up
    I have another router tenda w311r+ and there i have options in WDS- Lazy, Bridge and Repeater modes..
    Lazy mode is without asking BSID but others ask so i asume Lazy repeats every routers around signals..
    But what then is difference in Bridge and Repeater mode?
    I wasnt able to set all up corectly..
    Read tutorials about w311r+ and doing similar couldnt get it work..

    1
    In tenda i have
    Wifi settings
    BSSID NameTenda123 Passw123 <---- This is not same as WRT54G settings, do i need to make it like that also? Even channel the same?
    WDS settings
    Repeater ESSID Mac of WRT54G and WifipasswofWRT54G <--- this is the same as set inWRT54G
    2
    And do i connect from computer to NameTenda123 to get repeated signal from WRT54G ?
    Or the same name as reapted signal router i need to connect? BSSID of WRT54G? And do i need to set in tenda wifi settings witch now are different then WRT54G wifi settings but in Tenda WDS repeater settings are set..
    Maybe i need to set Tenda wifi off and only set WDS to be on?
    3
    Also to WRT54G i log in to 192.168.0.1 and maybe i need to set Tenda to 192.168.0.2 ? and something else?

  • How to switch off internal macbook screen when using external monitor(s)

    as far as i observed, adding external displays ( running different screens on them, not mirroring)  to a macbook pro  increases the gpu workload and with that comes temperature rise in the laptop and increase in ventilator noise - and probably increased hardware aging and risk of component faillure due to high temperature inside the laptop.
    simply try connecting two external 27" screens and open some flash video on both of them. then run a temperature monitoring software and watch temps rise, compared to running same flash videos / demanding tasks only on one connected external screen or only on the laptop screen with no external monitor connected.
    especially in mavericks, due to its increased background routines, such a set-up appears ever the more taxing, then again who does not love apple`s nice adds showing laptops with two 27” screens connected to it and the workspace vision they invoke....
    i have seen temps around 100° to 102° celsius on a 13" macbook pro 2012 edition, which i would expect is territory where the cpu / gpu temp safety switches will trigger system shutdown any time soon ( hardware status before verified as fully in order by apple service and default osx installation)
    imagine your anti-virus software starting some realtime content screening while runnign some demanding tasks already and the system shuts down easily (all such situation observed in reality)
    (would be interesting to see how a retina display macbook fares with 2 external monitors running demanding tasks, considering the retina display already increased taxing for the gpu - any experience from users of such a setup would be very much appreciated as it will provide critical purchase decision intelligence for all of us envisioning a retina-book and two big screens adoring our desks...)
    turning down the macbook`s built-in screen`s backlight may reduce power consumption but i have not seen any evidence that it switches off the gpu-to-screen feed and respective gpu load - it certainly did not prevent gpu, cpu, board, etc temps to rise to borderline levels.
    so the key question here is, how to switch off the macbook pro`s built-in screen in order to avoid gpu cycles being wasted on that screen ( and the resulting heat developments)  when working with big external screen(s)  connected to the laptop ?

    this thread talks about running several monitors as advertised by apple and running demanding task on them.
    with the lid open, the keyboard offers a very efficiant heat escape vector, which is blocked when the lid is closed - this is a basic and commonsense insulation effect.  this thread also mentions the use of temperature monitoring software and thus a repeatable test setup. the temps recorded were also mentioned. they rose when the lid was closed, the running task remaining unchanged. as far as i could track down the cpus in discussion will shut down around the 105 degree celsius range. i observed system shut downs when the system approached 103° celsius.  not to mention that the fans will run loud well before that.
    again this is on hardware checked and ok-ed by apple service.
    the question still welcoming an expert answer: is there any way to switch off the built-in macbook monitor while the lid is open ?

  • How to switch off the Wireless Transmitting of the xDock for the iPod?

    Hey,
    Can anybody help me how to switch off the wireless streaming of the xDock transmitter for the iPod? I tried to do it by resetting and I already read the FAQ but nothing seemed to work...
    Thanks for your help. ;-)
    Hi,
    Kann mir irgendjemand sagen, wie ich bei meinem xDock Transmitter f?r den iPod das wireless streaming ausschalten kann? Ich habe bereits versucht das Ger?t zu resetten und habe das FAQ gelesen aber nichts hat geholfen...
    Vielen Dank im Vorraus f?r eure Hilfe ;-)

    turn it into standby mode
    unplug the power supply from the x-fi dock
    press the volume controller and hold it while plugging the power supply
    the link control led on the backside will glow shortly and and turn off
    thats it
    to reactivate it press both the forward and backward wind button for at least 3 seconds
    But I think, this is really a shame, that the WLAN network is unusable when using the x-Fi wireless function.

  • Unable to switch  screen mode from standard: PS CS5

    Full screen with or without menus is grayed out in the view menu and the view dropdown selector from the menu bar. I have quit and re-entered PS and have reset all workspaces to default. I have checked that I'm working in 64 bit. I still cannot switch screen mode from standard. Last update was to 12.04. Last extension installed was photokit sharpener.
    Thanks for any help. (PS, how do I reset preferences file on a mac?)
    Cathy
    Pertinent info:
    Adobe Photoshop Version: 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04/07:02:00:00 cutoff; r branch]) x64
    Operating System: Mac OS 10.6.7
    System architecture: Intel CPU Family:6, Model:37, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 2
    Logical processor count: 4
    Processor speed: 3200 MHz
    Built-in memory: 4096 MB
    Free memory: 2353 MB
    Memory available to Photoshop: 3698 MB
    Memory used by Photoshop: 69 %
    Image tile size: 128K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Normal
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: False.
    OpenGL Crash File: Not Detected.
    OpenGL Allow Old GPUs: Not Detected.
    OpenGL Version: 2.1 ATI-1.6.26
    Video Card Vendor: ATI Technologies Inc.
    Video Card Renderer: ATI Radeon HD 5670 OpenGL Engine
    Display: 1
    Main Display
    Display Depth:= 32
    Display Bounds:=  top: 0, left: 0, bottom: 1080, right: 1920
    Video Renderer ID: 16915203
    Video Card Memory: 501 MB

    Ahh, I knew it was probably something simple. No I didn't have a doc open since I was just working with prefs and trying to set desktop color. Banging my head now on my desk. Bam! So dumb ...
    Thanks so much for solving my problem.

  • How to switch off my main screen (Imac 24") to use an external proyector?

    Please Help!
    How to switch off my main screen (Imac 24") to use an external proyector?
    It's not comfortable when you want to see a nice movie!
    Thanks
    Jack

    As I already said in my first reply post, you cannot turn off the iMac's display. The best you can do is display black, which many applications that have a +full screen+ mode will do, if the full screen mode is on the other display.
    Alternately, you can move the menu bar (along with Dock and disk icons) from the iMac's screen to the second display. This is done in System Preferences Displays pane Arrangement tab, by dragging the white bar in the diagram from one screen to the other. Once the menu bar and other features are on the second display, the only thing showing on the iMac's display should be the Desktop background. If you pick a Desktop background that is all black, your iMac's display will be showing a black screen (although it will still not be turned off).

  • How to switch off screen blocking if I forget password and couldn't use iTunes?

    How to switch off screen blocking if I forget password and couldn't use iTunes?

    If you are saying that you've forgotten the passcode to unlock the iPad then you will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and restore/re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode for your iTunes to be able to reset it : http://support.apple.com/kb/ht1808
    If you do it via a different computer then :
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

  • DOM Parser Configuration...how to switch off DTD validation?

    Hi all,
    I am developing some implementation code in Java using JBuilder2005, in which DOM3 parser is also being utilised. Now the question is how to switch off DTD validation (seems its default mode is 'on') so that no validation will be carried out at all even DTD declaration statement is presented in an input XML document?
    Many thanks in advance
    Frank

    First of all, thank you so much for responding, DrClap. =)
    setValidating(false) of the DocumentBuilderFactory instance, factory, does not work as expected; it still stubbornly try to seek the external DTD file and fires 'IOException' error in case of no such a DTD.
    To follow up the EntityResolver approach, I searched online for almost the whole afternoon but still could not figure out how to do it exactly. In particular, I found http://www.jdom.org/docs/faq.html#a0350, which tells a way doing it, but I got 'StringBufferInputStream is deprecated' error. Then I changed to
    new InputStream(new ByteArrayInputStream("".getBytes()))adapted from http://forum.java.sun.com/thread.jspa?threadID=572919&messageID=2842185. But another error occurs: 'java.io.InputStream is abstract; cannot be instantiated'. Furthermore, I have looked at many docs(tutorials, APIs...) on parser configuration, usage of EntityResolver/setEntityResolver()...but they turned out not helpful. Could you please give out more details on how to do this using EntityResolver?? Many many thanks...

Maybe you are looking for

  • Error ERP 6.0 Installation step 32 of 96 JAVA

    Hello everybody, i have the folowing error in my installation: FCO-00011 The step redeployForJSPM with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|4|0|redeployForJSPM was executed with status ERROR So all

  • [SOLVED] /media permission denied

    $sudo mount /dev/sda1 /media mount: warning: /media seems to be mounted read-only. $ groups lp wheel games network video audio optical storage power howard trying to mount my music hard drive in /media for audacious. it's ntfs and ide if that makes a

  • Difference between EP and Web AS JAVA

    Hi all, I am new to EP. I wish to know the clear differences, if any. I work in a project where there is an enormously complicated landscape. There is a 'central portal' (EP 7.0); services from backend ABAP systems are accessed. Every ABAP system (EC

  • How can I tell what version a I-tv is

    How can I tell what version a I-tv is

  • How do I return to the top of a while loop?

    I have a while loop running through a file. If some criteria in the line produces and error I'd like to return to the top of the loop and process the next line. I'd rather not nest everything in if's because it tends to make code 'downstream' very in