How to synchronise SRM and ECC for purchase groups?

HI,
recently we created two purchase groups in ECC. But these purchase groups did not replicate to SRM.
the table in ECC T024 has those purchase groups but the table in SRM HRT5500 does not have those purchase groups.
How can we make them in sync. Please guide me.
Thanks,
Nandan Upasani.

Hi,
Thatu2019s correct that you cannot establish to replicate Porg and pgrp to SRM. So better you perform following creation and assignment in SRM PPOMA_BBP Tcode as u2013
1.     Create purchasing group in SRM by copy any existing Pgrp and change the details as you created in ECC.
2.      You have to select a purchaser whom you are going to do purchasing assignment.
3.     Do the purchasing assignment to the purchaser's position.
You have to do this process for all the pgrps you added.
Regards,
Atul

Similar Messages

SRM AND ECC

Dear all,
Iam new to SRM.pls explain brief about SRM.
I have installed ECC 6.0 ABAP STACK only hp-ux,db2 9.1.
pls tell me 1.whether we need to install abap+java stack in srm or only java is enough.
2.pls tell me brief explanation about how to go about that.
3.how to link srm and ecc 6.0.whether srm

Dear Rajesh,
SRM is a e-procurement solution and it's web based procurement. If you are having MM knowledge then you can understand very easily or Even if you knew sap-abap then you can understand quickly SAP-SRM.
Please go thorugh the below link then you can understand very easily.
http://help.sap.com/saphelp_srm50/helpdata/en/8d/f6a93e08503614e10000000a114084/frameset.htm
If you require more clarifications then let me know.
Thanks
Ravi

SRM-Synching company code description between SRM and ECC

Hi,
I have two questions:
1. Is company code descriptions and other details are stored in SRM (like T001 in ECC)?
2. If yes, how can we synch the company code description in SRM and ECC? What is the program name to synch both system
Jit

Sanjeev,
Thanks for the reply. But still there is description difference in SRM - frontend and backend system.
The SRM backend is correct but when we log ninto the SRM portal (frontend), the company code description are missing some characters. Can you pl let me know where is the frontend is picking the Company code description in SRM?
Jit

SRM and MDM for material master in SRM contracts for multiple R/3

Dear all,
my question is:
We are implementing SRM 4.0 in classic scenario with multiple R/3 back-end and we want to set-up Global Outline Agreements in SRM in a multi-backend environment where the Material Master are not harmonized.
We heard that MDM and COntent Integraton can be a solution.
Then detailled question is:
Can we have 2 material numbers (e.g. ABC and XYZ) in 2 different R/3 systems refering the same product.
Have the mapping done in MDM (Content Integrator?) to a third material number:123
Replicating the material master 123 to SRM from MDM(?)
Create global Outline Agreements in SRM for Material Master 123.
Distribute the GOA as Outline Agreement to R/3 system 1 with the translation to ABC and to R/3 system 2 with the translation XYZ, all of that during the distribution step (or another).
Have the call-offs quantities correct on 123 in SRM and BW?
IF yes, how is it working, do you have some documentation discribing the scenario and the config steps to do?
Thanks in avance

Hello RD,
That's a good question.
You are on the right way. MDM is the tool for you.
But..
Content Integrator (CI) was first developped for Shell, to address the need of cross-referencing of material/supplier/category IDs, for:
- reporting purpose (actual Spend Analysis)
- mapping purpose (send of XML PO)
CI was later "fusionned" into the new MDM (1.0) solution.
So now, you can not order CI without MDM (even if some SRM slides still present CI).
But mapping API where developped for all inboud/outbound interfaces in SRM, for materials only (good luck for you).
You will find everywhere this piece of code:
Call ECI
    CALL FUNCTION 'BBP_PRODUCT_MAP'
      TABLES
        it_input          = lt_mapping_in
        et_output         = lt_mapping_out
      EXCEPTIONS
        logsys_not_found = 1
        driver_not_found = 2
        product_not_found = 3
        internal_error    = 4
        OTHERS            = 5.
So it is ok, you have the mapping call, but I don't know if all the rest of the process was really "finalized" (call of API mapping in CI, via XI). I personnaly never used it, but I assume it should work.
I my opinion your process is supported by SAP:
- Extract materials from both R/3 and consolidate them as a single product in MDM.
- Distribute this product into SRM.
- Maintain contracts on those products.
- Distribute them to R/3 (The ECI call is also used during contract distribution).
- Call offs corrects in SRM and BW
For MDM documentation, look at netweaver area of service.sap.com.
For MDM/SRM integration, look at SRM 4.0 spend analysis:
https://websmp206.sap-ag.de/~sapdownload/011000358700004424262004E/GlobalSpendOverview.ppt
For SRM contract distribution, call-offs, BW, look at SRM in details in service.sap.com/srm/SRM4.0:
https://websmp206.sap-ag.de/~sapdownload/011000358700001966382004E/contracten.ppt
For SRM5.0, see online help on help.sap.com.
Rgds
Christophe

How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_0

How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_001 using Functional Module NUMBER_GET_NEXT explain me ?

Hi,
First go thourh the FM import export parameters list.
Try to create an internal table of type INRI-NRRANGENR for number ranges.
We can provide the lower and higher values for this table so that what ever PO is created will be with that range.
Try to create the ncessary ones using this FM.
In the Exit, EXIT_SAPMM06E_001,
the Export parameters are-
EKKO-EBELN- the PO ios created with in that specified range
Range as INRI-NRRANGENR - Here try to assign the Internal table that was populated in the FM.
Try to code this in the Include provded and keep Breakpint and check the PO number generated.
Reply if u need more help on this.
Reward if helpful.
Best Wishes,
Chandralekha

HOW TO FIND WF_ITEM_TYPE AND WF_ITEM_KEY FOR PO

제품 : MFG_PO
작성날짜 : 2003-05-14
HOW TO FIND WF_ITEM_TYPE AND WF_ITEM_KEY FOR PO
===============================================
PURPOSE
This solution is for Oracle Purchasing 11 and higher
Explanation
1. Start a SQL*Plus session using the APPS schema.
2. Run the following script and enter the Purchase Order number that is stuck
in process when prompted for the PO_NUMBER:
     SELECT WF_ITEM_TYPE, SUBSTR(WF_ITEM_KEY,1,25) "WF_ITEM_KEY"
     FROM PO_HEADERS_ALL
     WHERE AUTHORIZATION_STATUS='IN PROCESS'
     AND SEGMENT1='&PO_NUMBER';
3. If more than one row is returned, then run the following script and only
refer to the row that contains the OPERATING_UNIT_NAME that equals the
operating unit name tied to the responsibility used when the Purchase Order was
discovered as being stuck in process.
     SELECT SUBSTR(WF_ITEM_TYPE,1,12) "WF_ITEM_TYPE",
     SUBSTR(WF_ITEM_KEY,1,15) "WF_ITEM_KEY",
     SUBSTR(NAME,1,35) "OPERATING_UNIT_NAME"
     FROM PO_HEADERS_ALL PA, HR_ORGANIZATION_UNITS OU
     WHERE PA.ORG_ID=OU.ORGANIZATION_ID
     AND AUTHORIZATION_STATUS='IN PROCESS'
     AND SEGMENT1='&PO_NUMBER';
Example
Reference Documents
-------------------

Hi Kishore,
Welcome to SCN!
to find the sales order from Purchase order , go to SE16, Enter the table name as VBAK and press Enter.
In BSTNK field of VBAK, Enter the Purchase order number. System will return you corresponding sales order.
Hope this will help you.
Regards,
Nikhil

Link between SRM and ECC invoice

Dear gurus,
I need to find the link between SRM and ECC invoice number, can you please provide me the related tables?
Thank you in advance for your collaboration.
Regards,
Fuffo

i don't have access to the system now but i guess will be table BBP_PDBEI.
or you can go tcode BBP_PD, check in item level.
cheers.

Mapping between SRM and ECC long text

Hi Experts,
Please advise if anyone know where SAP do mapping of long texts of SRM and ECC objects. I found it in one program in my last project but forgot the name.
Regards,
Kamal

Hello Kamal,
You can use BBP_LONGTEXT_BADI for mapping SRM text to ECC text. SRM needs mapping rules to map SRM text into ECC text.
For details check BBP_DPO_TO_BAPI_MAP that executes the mapping ( text_copy_rules_be_get ).
Hope this helps.
Thanks
Ashutosh

Unit of Measurement is comming **** in SRM and ecc system

Hi All,
I create new Unit in CUNI and replicated in my system but now if i see all the old PO's in SRM and ECC.....All units of measurement are comming '****' in place of unit of measurement but when i create a new Sc and PO replicated in ECc that vlaue is comming perfectly fine . Please tell me how i can fix this bug.
Regards to all,
Smriti Arora

i check translation it is availabe in english.But how could this happen to all the UOM.......i check in ECC and SRM ie coming ****.
Smriti Arora

How do I enter Document Type for Purchase requisition IDOC

Hello,
File - IDOC (PREQCR.PREQCR02)
The file is getting picked up and shows up a checkered flag in Moni..
but in WE05, on R3 side, i see an error message
"Enter Document Type"
How do I enter document type for Purchase requisition IDOC?
will that solve this issue?
thanks and regards
Nikhil.

Hi,
For error 51, you need to set the default document type in the inbound processing FM of the IDOC
Standard type - NB
Subcontrator type
Blank PO
Service PO
Stock transport PO.
Document types is used for below things,
1. It controls the no. range of the document i.e. the doc no.
2. It controls whether doc no. is auto assigned or manually entered
3. It controls the field status of the doc header fields i.e. whether input is mandatory or optional
4. It controls the physical doc filing
Thanks
Swarup

How to find classtype and class for a material.

Hi,
How to find classtype and class for a material.
which table contains this data.
Thanks
Kiran

Hi Kiran,
Check below sample code. Use this BAPI which will give all info about the class for the material.
DATA:      l_objectkey_imp    TYPE bapi1003_key-object
                                     VALUE IS INITIAL.
CONSTANTS: lc_objecttable_imp TYPE bapi1003_key-objecttable
                                     VALUE 'MARA',
             lc_classtype_imp   TYPE bapi1003_key-classtype
                                     VALUE '001',
             lc_freight_class   TYPE bapi1003_alloc_list-classnum
                                     VALUE 'FREIGHT_CLASS',
             lc_e               TYPE bapiret2-type VALUE 'E',
             lc_p(1)            TYPE c             VALUE 'P',
             lc_m(1)            TYPE c             VALUE 'M'.
SORT i_deliverydata BY vbeln posnr matnr.
CLEAR wa_deliverydata.
LOOP AT i_deliverydata INTO wa_deliverydata.
    REFRESH: i_alloclist[],
             i_return[].
    CLEAR:   l_objectkey_imp.
    l_objectkey_imp = wa_deliverydata-matnr.
*Get classes and characteristics
    CALL FUNCTION 'BAPI_OBJCL_GETCLASSES'
      EXPORTING
        objectkey_imp         = l_objectkey_imp
        objecttable_imp       = lc_objecttable_imp
        classtype_imp         = lc_classtype_imp
*   READ_VALUATIONS       =
        keydate               = sy-datum
        language              = sy-langu
      TABLES
        alloclist             = i_alloclist
*   ALLOCVALUESCHAR       =
*   ALLOCVALUESCURR       =
*   ALLOCVALUESNUM        =
        return                = i_return
Thanks,
Vinod.

How to remove bullets and spacing for url links in the Related Links iview?

I tried to look for a property that I can edit the look-n-feel of the url links in the Related Link iView using "Theme Editor".
All I need is to remove the bullets and increase some vertical spacing between the links.
Currently, it looks like this:
URL iView A
URL Iview B
I go through the whole section of Related Links properties, none of them seems to do what I want.
Here are the list of properties in Related Link section (of Navigation Panel):
Link Color
Text Decoration of Link
Hover Color
Text Decoration of Hovered Link
Initially, I thought "Text Decoration of Link" should be the right property I should look at. But there are a drop-down with 5 options: None, Underline, Blinking, Overline and Line-Through, which really can't achieve what I want.
Thanks for advice.
Kent
Post with Diagram Illustration:
<a href="http://sapnetweaverforum.blogspot.com/2006/11/how-to-remove-bullets-and-spacing-for.html">How to remove bullets and spacing for url links in the Related Links iview?</a>
Message was edited by: Kent C.

Hi, Kai.
I checked the Related iView properties (URL Template), I don't see what layoutset it is really using. I am not sure, is that a layout set apply to the Related Link Iview?
For the regular KM iView, I will see what Layout Set I want to apply, then I can go and change the properties (of layout coontroller, collection renderer & resource renderer)you mentioned. But for this Related Link iView, I really don't know. I guess it may be in the code itself.
If there is a layout set for Related Link iView (or the place to apply layout set to it), can you point to me which one is that? (I did a search through the layout set names, I only find the AppQuicklinkExplorer (I used this for Dynamic Nav. Link iView before), if I can aply this layout set to Related Link iView, my problem will be solved.)
Thanks for help.
Kent

How can I remove and replace a purchased app that is malfunctioning.

How can I remove and replace a purchased app that is malfunctioning.?

Delete the App and redownload it...
Touch the app and hold your finger down until all the apps start to jiggle.
You will see a circled "x" in the upper left corner.
Tap it to delete an app. When done press the Home button.
( You cannot delete any pre-installed iOS app.)
http://www.apple.com/support/ipad/applications/
Download Past Purchases
http://support.apple.com/kb/HT2519
Log into iTunes using the account the Purchase was made with... Click on Buy... and a notice will come up saying you already have it... do you wish to download it again... Click Yes...

Can we use NWBC with both SRM and ECC

HI
Can we use NWBC both SRM and ECC . or do i have to use EP .
Thanks,
Pooja

Hi
Hope this will answer your question
ECC Transactions in NWBC Browser SRM 7.0
Thanks,
Ashish

How to download drivers and software for hp pavilion dv6-3127tx . product unable to search

How to download software and drivers for HP Pavilion dv6-3127TX. Unable to search the product in help and support center.
Mohan Singh

Hi,
I can't find a listing for this model either, but you should find the drivers available on the link below work.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=4331848&lang=en&cc=us...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to synchronise SRM and ECC for purchase groups?

Similar Messages

Maybe you are looking for