How to talk to my wifi router using tcp(?) functions?

Hello All,
this is what I'd like to do: use the Labwin. CVI environment to log onto my wifi router,  pass user ID/password, then ask questions from router the answer to which I'd like to analyze (for example get visited URL addresses, etc.). Is this possible to do using e.g. the TCP functions of CVI?  I checked out the sample codes came with CVI but there CVI created client talks to CVI created server... I greatly appreciate any help. Cheers. kosamici

Hello KyleP,
thanks for your reply. It definitely looks like the application you suggested will take me along the direction I am heading.  I'd like to complete the whole exercise and try to modify from there... So in the description I read that this app will get stock prices from some google webservice and I need to get license to be able to use it...
In the .c file, however, the description talks about google's spell checker service...?
Also when I go to  http://www.google.com/apis/,    the  http://code.google.com/ site comes up and I do not know where to go from there....
Sby was asking about the gui, but it look like this app just communicates through the standard console, right?
Thanks again.
Kosamici

Similar Messages

  • How-do-i-configure-guest-wifi-access-using-2504-wlc-fortigate-utm-l3-device

    Dear All
    I have a 2504 Wireless Controller with multiple radios attached. I currently have a "private" WLAN configured (taking ip from windows server based DHCP of Range 192.1681.0/24 ) and working, but I need to add a Guest/Public WLAN which should take the IP from Other DHCP Configured on Fortigate UTM of range 172.16.0.0/24.
    We have one SG300 switch in the office and the rest are basic switches.
    Our firewall/router is a Fortigate UTM 240D
    Find the attached network diagram for the issue.
    Is there a SIMPLE way to enabling guest access that doesn't require VLANS (or are VLANS easier than I'm making them)? 
    Thanks.
    - See more at: https://supportforums.cisco.com/discussion/12473186/how-do-i-configure-guest-wifi-access-using-2504-wlc-fortigate-utm-l3-device#sthash.aj1XcWI0.dpuf

    Complete these steps in order to configure the devices for this network setup:
    http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-vlan/70937-guest-internal-wlan.html
    Configure Dynamic Interfaces on the WLC for the Guest and Internal Users
    Create WLANs for the Guest and Internal Users
    Configure the Layer 2 Switch Port that Connects to the WLC as Trunk Port

  • Authentication syntax for HTTP GET method using TCP functions in Labview on linux

    Hi,
    Currently, I am trying to communicate to web server. I have Labview installed on a Linux machine. The HTTP function blocks and other labview functions do not work. Hence, I am building a HTTP code string using TCP functions (port 80) to talk to the web server. I am successfully able to fetch a response from web sites (example www.ni.com) from my vi. However, when I try to communicate to my web server, it does not work. It requires an authentication. I am able to open http://ipaddress in my browser from my machine using username and password. Can someone help with Authentication string requirement for GET method?
    so far the string is:
    GET /index/ HTTP/1.1
    Host: http://xx.xx.xx.xx

    An easy option would be to try http://userassword@server syntax for the URL.
    Else I posted a Twitter fetcher once (won't work anymore since Twitter moved to Oauth authentication) at LAVA. Based on code from @cloew.
    The code is part of this LLB.
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • How to reset password on wifi to use facetime

    how can i reset my password in wifi to use facetime?

    To reset stored WiFi passwords on your phone: Settings>General>Reset>Reset Network Settings.

  • How to keep long text in bdc using create_text  function module

    hi,
    ihave bdc in that i having field like long text i have to upload the long text using create_text function module how to use and where to use in bdc. wat parameters i have to pass exactly.
    i need some other information like how can i pass this to BDC i got like this .
    can u plz check it.
    its a length of 255 chaters
    perform bdc_field using 'RSTXT-TXLINE(02)'
    'zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz'
    & 'zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz'.
    perform bdc_field using 'RSTXT-TXLINE(03)'
    'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'
    & 'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx'.
    perform bdc_field using 'RSTXT-TXLINE(04)'
    'yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy'
    & 'yyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy'.
    perform bdc_field using 'RSTXT-TXLINE(05)'
    'hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh'
    & 'hhhhhhhhhhhhhhhhhhhhhh'.

    Hi,
    Use this coding where do u want,
    data: begin of textline occurs 10.
            include structure tline.
    data: end of textline.
    start-of-selection.
    textline-tdformat = '*'.
    textline-tdline = 'TESTING FOR CREATION OF TEXT'.
    append textline.
    clear textline.
        call function 'CREATE_TEXT'
             exporting
                  fid       = '0013'
                  flanguage = sy-langu
                  fname     = '0095000501'
                  fobject   = 'VBBK'
             tables
                  flines    = textline
             exceptions
                  no_init   = 01
                  no_save   = 02.
    end-of-selection.

  • How to call RFC in Async Mode using TCP/IP RFC Destination ?

    Hi experts,
         Can anybody tell me how to call an Async RFC using TCP/IP RFC Destination ?
    Regards,
    Umesh

    Check the link
    http://help.sap.com/saphelp_nw04/helpdata/en/80/09680289c751429ab3b07ad2a61c10/content.htm
    It says
    <b> For asynchronous calls, no connection to external systems is possible (TCP/IP connections in transaction SM59).</b>
    Regards,
    Abhishek

  • How to find which all workbook is using Database function ( User Defined)

    Hi All,
    Is it possible to find out which all workbook is using Database function( User Defined).
    Thanks,

    Hi,
    If I had to do this detective work, I would probably do the following:
    1. Activate for a period of time the function, eul5_post_save_document. This function when activated is triggered at the time a workbook is saved. If you look at its columns, it save the worksheet's SQL.
    2. Next, I would parse the EUL5_WORKSHEET_SQL.SQL_SEGMENT column which is a varchar2(4000) column. There are many effective Oracle functions which could aid you in this effort (e.g. instring or perhaps a regular expression function).
    I hope this helps.
    Patrick

  • How can I maximize my wifi speed using the Time Capsule?

    I do not feel that my wifi speed is as fast as it should be.  I have a 2 TB Time Capsule and connect wirelessly with an Apple MacBook Air, an iPhone 5s, an iPad 4, and iPad mini.  The online manual just tells how to do the initial setup but not how to tweak the settings.  Any idea how I can check my settings?

    There's little if anything to tweak. Your wireless speed will depend upon how many devices are using it at the same time since it is shared bandwidth. Wireless is also affected by what's between the device and the router like walls, ceilings, and other obstructions. If you have two devices connected at the same time one of which only supports 802.11a/b connections and one that supports and another that uses 802.11a/b/n (faster), then your network speed will drop down to the speed of the slowest device connected.
    Just use it. There's little you can do unless you have defective hardware.

  • How to set six WRT300N wireless router use the same SSID

    I have six WRT300N wireless router and cannot setting shared the same SSID....
    Somebody can help me?

    please explain like how are you trying to set up these routers..... even if you set up these routers using the same ssid , they won't communicate with each other wirelessly....

  • HT202157 Please tell me how to talk with my iphone 5 using the apple TV ??

    How to contnet my iphone 5 to apple tv Thank you

    Not sure what you are referring to.
    If you mean how to connect for setup purposes, see
    http://support.apple.com/kb/HT5900?viewlocale=en_US&locale=en_US
    If you are trying to use airplay
    http://support.apple.com/kb/HT4437
    For mirroring
    http://support.apple.com/kb/ht5209

  • How to talk to a  Windows Service using java

    Hi,
    I've a ATL COM Service running on a specified port.
    At least I should be able to talk to an ordinary service
    Now I need to talk to the service through java.
    I need to call some functions in the service.
    Can somebody please help me....plzz
    If possible send me urls
    Thanks in advance

    Hi,
    How about something like this:
    $started = $false
    Do {
    $status = Get-Service alg
    If ($status.Status -eq 'Running') { $started = $true }
    Until ( $started )
    Don't retire TechNet! -
    (Don't give up yet - 12,575+ strong and growing)

  • How to produce Material output message when use bapi function?

    Dear Experts :
    I use bapi BAPI_GOODSMVT_CREATE to receive stock.
    I find the output message can't create automatically even when I have set the type in MR21.
    Hope someone can teach me how to produce the message when I create the material document by BAPI function.
    Thanks a lot.

    Hi,
    The messages are stored in the return table of the bapi.
    You can search in SCN or Google for BAPI error handling.

  • How to return two XML result sets using the function

    Hi Experts,
    Thanks.

    So that I want to return two XML result sets if the query returns more than 50,000 records.
    One XML result set with 50,000 and another XML result set with remaining records.
    How to incorporate this in my function.
    Have the function return a collection of CLOB then.
    DBMS_XMLGEN can handle pagination so it's easy to adapt your existing code.
    Here's an example fetching data in batches of max. 3 rows each, using a pipelined function :
    SQL> create or replace type clob_array is table of clob;
      2  /
    Type created
    SQL>
    SQL> create or replace function genXmlRowset (p_deptno in number) return clob_array pipelined
      2  is
      3    ctx    dbms_xmlgen.ctxHandle;
      4    doc    clob;
      5  begin
      6 
      7    ctx := dbms_xmlgen.newContext('SELECT empno, ename FROM scott.emp WHERE deptno = :1');
      8    dbms_xmlgen.setBindValue(ctx, '1', p_deptno);
      9    dbms_xmlgen.setMaxRows(ctx, 3);
    10 
    11    loop
    12 
    13      doc := dbms_xmlgen.getXML(ctx);
    14      exit when dbms_xmlgen.getNumRowsProcessed(ctx) = 0;
    15      pipe row (doc);
    16 
    17    end loop;
    18 
    19    dbms_xmlgen.closeContext(ctx);
    20 
    21    return;
    22 
    23  end;
    24  /
    Function created
    SQL> set long 5000
    SQL> select * from table(genXmlRowset(30));
    COLUMN_VALUE
    <?xml version="1.0"?>
    <ROWSET>
    <ROW>
      <EMPNO>7499</EMPNO>
      <ENAME>ALLEN</ENAME>
    </ROW>
    <ROW>
      <EMPNO>7521</EMPNO>
      <ENAME>WARD</ENAME>
    </ROW>
    <ROW>
      <EMPNO>7654</EMPNO>
      <ENAME>MARTIN</ENAME>
    </ROW>
    </ROWSET>
    <?xml version="1.0"?>
    <ROWSET>
    <ROW>
      <EMPNO>7698</EMPNO>
      <ENAME>BLAKE</ENAME>
    </ROW>
    <ROW>
      <EMPNO>7844</EMPNO>
      <ENAME>TURNER</ENAME>
    </ROW>
    <ROW>
      <EMPNO>7900</EMPNO>
      <ENAME>JAMES</ENAME>
    </ROW>
    </ROWSET>
    SQL>
    (and don't forget to use bind variables in your query)

  • How to open sounds and audio properties using Labview function

    Hi All,
    How to open the sounds and audio properties of the control panel using the Labview system exe vi.
    Is there any dll also to open this property.
    If there is dll which is that and how to program the dll to serve my purpose.
    Solved!
    Go to Solution.

    Have you looked at the "Graphics and Sounds" section within the Functions Palette (Block Diagram)? There are VI's that already exist for this.
    R
    Message Edited by JoeLabView on 09-04-2008 07:44 AM
    Attachments:
    sounds.PNG ‏12 KB

  • How to get active tab strip name using standard function ?

    Dear all,
    I have 5 Tab strip in my view, how can i know which tab strip is active during runtime ?
    Best Regards
    Fernand

    HI
      I hope you may be looking  at this thread , hope its  a  similar requirement as yours
      How to get the selected Tab from a TabStrip.
    Thanks

Maybe you are looking for