How to tpalloc() based on sizeof() value?

Hello All,
If I have a C structure (say no pointers inside), is there any way to allocate
Tuxedo FML buffer to hold this structure data. Can this be done in one shot?
Or
Is there some way to determine value of tuxsize where csize = sizeof(struct emp)
where tpalloc(tuxsize) can hold all the data in structure emp.
Any ideas
Sam

TUXEDO does offer the VIEW buffer type, which holds a flat C structure.
If you have already determined that VIEW does not meet your needs, then
you can store the structure in either a CARRAY buffer, or a CARRAY field
inside an FML buffer. You will need to allocate the FML buffer larger
than your structure, since there is overhead.
Note that Tuxedo will not convert the datatypes when going from one
machine to another if you do it this way.
Scott Orshan
Sam wrote:
Hello All,
If I have a C structure (say no pointers inside), is there any way to allocate
Tuxedo FML buffer to hold this structure data. Can this be done in one shot?
Or
Is there some way to determine value of tuxsize where csize = sizeof(struct emp)
where tpalloc(tuxsize) can hold all the data in structure emp.
Any ideas
Sam

Similar Messages

HTML Dataset - how to filter based on data values within columns

I have had success with using the XML dataset and filtering based on user input (see javascript example below)
<script type="text/javascript">
var ds2 = new Spry.Data.XMLDataSet("disciplinary_actions3.xml", "doh/disciplinary_actions2[type='<? echo($type) ?>'][name>='<? echo($name) ?>']");
ds2.setColumnType("date-of-sanction", "date");
</script>
The XML dataset filters the results based on the type and name values within the XML dataset columns.
I need to accomplish this type of filtering with an HTML table. All that I have been able to accomplish with the use of the in the rowselector (see example below)
<script type="text/javascript">

</script>
How can I filter the HTML dataset based on the data VALUES within the table columns and NOT the class or id or span or div,,,etc?
Although my advanced dataselector within Dreamweaver CS4 has a column selector... I can't under or get it to work.
Any assistance or direction is greatly appreciated.

Hi Ron,
According to your description, you want to pass the Terminal number that user logon to where clause without needing to create a userid table, right?
As per my understanding, you need to add an additional table to store the user and corresponding terminal, so that you can filter the data to show the rows based on the user and corresponding terminal. Here are some blogs which describe dynamic security
on tabular model, please see:
http://blogs.msdn.com/b/himanshu1/archive/2013/03/02/implementing-dynamic-security-in-tabular-models.aspx
http://www.bidn.com/blogs/ChrisSchmidt/ssas/4332/dynamic-security-in-tabular
If this is not what you want, there is no other approach to pass the Terminal number that user logon to where clause without needing to create a userid table. Thank you for your understanding.
Regards,
Charlie Liao
TechNet Community Support

How to capture the entries based on filter values in oo alv..

Hi all,
I have a scenario in my oo alv report, when the user select the any column on report and selects the filter option. In that the user can enters required values. Based on filter values the output will be displayed. Now how can i capture currently displaying entries on report.
Thanks,
Ashok

Hi Jozef,
Is that GET_FILTERED_ENTRIES( ) reads the indexes or values from the entries..?
Thanks,
Ashok

How to construct a standard rowKeyStr based on a value passed to a method ?

Hi to all im on a proyect and i really appreciate some people can help with this
looking ADF joins all use rowKey values and i need to know how to generate a standard rowKeyStr based on a value passed to an event, so it let me access any page on my Jsp ADF application and pass some values to a method and get the rowKeyStr.
i have this method actually getting the current row, how i can generate a standard rowKeyStr value.
public String myrowKeyStr(String id) {
if (id != null) {
PbeVisitasViewImpl vo = (PbeVisitasViewImpl)getPbeVisitasView1();
Key k = new Key(new Object[]{id});
Row[] found = vo.findByKey(k,1);
vo.setCurrentRow(vo.findByKey(k,1)[0]);
return someRowKeyStr;
}

once you do the
Key k = new Key ( new Object[] { p1 } );
The rowkeystring comes from:
String strRowKeyStr = k.toStringFormat();
Just type k. and press ctrl-space to see the list of methods.

How to create folder names based on Excel values or Txt files?

Hi there,
I often need to create large numbers of folders based on names I have saved in an Excel spreadsheet. I know in windows there is a way to create a macro within excel that automatically generates folder names based on cell values.
I was therefore wondering how to do the same on a Mac operating system. The main thing is to find a way to automate the process. I understand this may involve copying the values to a text file.
Below is an example of the names I need to create folders for (copied from the excel spreadsheet):
Wash Bowl Small 600
Deck Mounted Wash Bowl 500
Wash Basin - 866 - 2 Shelves
Wash Bowl Large 800
Built-In Wash Basin With 1-Taphole
Deck Mounted Wash Bowl 625
Would really appreciate a simple step by step approach to an explanation. As my understanding of using Automator, Apple Script, Terminal, etc, is extremely basic.
Thanks and Best Wishes,
Graham

Hi Niel,
Thanks again for another superb response. I have another question. Is it possible to automatically generate sub-folders along with the folder.
For example:
Folder                                                Subfolder
Wash Bowl Small 600          >            2D CAD
                                                           3D CAD
                                                           BIM
                                                           Images
                                                           Brochures
                                                           Specifications
                                                           Technical
                                                           Case Studies
                                                           Operations
Deck Mounted Wash Bowl 500    >   2D CAD
                                                          3D CAD
                                                          BIM
                                                          Images
                                                          Brochures
                                                          Specifications
                                                          Technical
                                                          Case Studies
                                                          Operations
Above shows the 9 generic sub-folders I need to create within each folder that is generated.
Best Wishes,
Graham

How to retrive new logical column based on flag values in table.

Hi,
i have two tables in rpd
1.file table contains the coulmns------->date,file_count,record_count,cldm_stg,cmsa_stg,archive_stg
2.rejection table columns---------> are same as above
both have same common columns.my requirement is publish a dashboard like:
date | land_files count |alnd_recordscount| target_files count|target_records count|Rejection filecount|rejection record count
These report ineed retrive from those two tables.based on flag values.taget countcomes when all stg values set to ='y'
i.e(cldm_stg='y' and cmsa_stg='y'and archive_stg='y') if not then it will be in rejection file.
Please give solution how to achive my output.
nQSError: 14026] Unable to navigate requested expression: Target_record:[DAggr(FILE_CONTROL.Target_record by [ FILE_CONTROL.FILE_NAME, REJECTED_FILES.FILE_NAME, REJECTED_FILES.NO_OF_ROWS, File_landing.NO_OF_ROWS, File_landing.FILE_LOAD_DATE] SB FILE_CONTROL)]. Please fix the metadata consistency warnings. (HY000)
Edited by: user8767586 on Jan 12, 2010 4:29 AM

Tanks for ypur reply .only two tables are there named as above.i taken file_control as a fact table.
and i create one new tablecalled target in bmm layer taking logical source as file_control(fact table). and iset the where clause for the new table.and i create a new measure called target_file and target_records.in where clause my query is like
dwbidb."".AUDIT_PROD.FILE_CONTROL.ARCHIVE_STATUS = 'Y' AND dwbidb."".AUDIT_PROD.FILE_CONTROL.CMSA_STATUS = 'Y' AND dwbidb."".AUDIT_PROD.FILE_CONTROL.LND_STATUS = 'Y' AND dwbidb."".AUDIT_PROD.FILE_CONTROL.SCRIPT_STATUS = 'Y' AND dwbidb."".AUDIT_PROD.FILE_CONTROL.STG_STATUS = 'Y'
please tell me if this is right way to achive mt report. and tell me difference between fragmentation and whereclause.for my requrement i ahve to follow which method either fragmentation or whereclause.and in rpd there are no errors and warnings.but in answers i get a follwing error
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14026] Unable to navigate requested expression: TARGET_FILECOUNT:[DAggr(TARGET.TARGET_FILECOUNT by [ TARGET.FILE_NAME] SB TARGET)]. Please fix the metadata consistency warnings. (HY000)
SQL Issued: SELECT TARGET.FILE_LOAD_DATE saw_0, TARGET.TARGET_FILECOUNT saw_1, TARGET.TARGET_FILECOUNT saw_2 FROM AUDIT_PROD ORDER BY saw_0.
Please tell me to achive my report.
Regards
Edited by: user8767586 on Jan 12, 2010 5:21 AM
Edited by: user8767586 on Jan 12, 2010 5:21 AM
Edited by: user8767586 on Jan 12, 2010 5:24 AM

How to create xml nodes based on a value

Dear friends,
I've a question about graphical mapping in SAP PI...
How can I create XML nodes on the target side based on a value in a XML field on the source side.
For example:
This XML field on the source:
<NO_OF_LINES>4</NO_OF_LINES>
Must result on 4 Lines on the Target:
<LINE></LINES>
<LINE></LINES>
<LINE></LINES>
<LINE></LINES>
So it's actually the opposite of the Count function...
I appreciate your help,
Thank you in Advance,
Kind regards,
John

Hi ,
Try this
NO_OF_LINES---> count---> UDF---> LINE
example :
UDF Code :
for (int i=0;i<var1[0];i++)
result.addValue("");

How to pass a value to a filter prompt based on a value list?

I have a query that has a filter prompt that is based on a value list. I want to call this query from another query as a drill down.
So I build the URL to call the query and pass the value for the filter prompts as URL parameters. For the filter prompts that are simple text fields this works without problems, but how do I pass a value to the filter prompt that is based on the value list?
I tried passing
<parameterName>=<valueListId>:616:null
and that gives me "None" for the value list prompt as expected.
I then tried to pass the DisplayName (as I would do when setting a default value for the prompt).
Like this:
<parameterName>=<displayName>
but that does not work.
I also tried some variations/combinations like
<parameterName>=<valueListId>:616:<displayName>
but that does not work either.
So does anybody know how to pass a parameter to the value list prompt?

Hi Martin,
I saw the following post which may help answer your question.
How to default a Value List or Object Picker to a particular value
Regards,
Reshma

How to dynamic select based on runtime value ?

how to dynamic select based on runtime value ?
I want to write a select function, which do selecting based on parameters. eg,
CREATE OR REPLACE FUNCTION myfunction
(tableName VARCHAR2, pkName VARCHAR2, pkValue VARCHAR2, requestString VARCHAR2)
RETURN VARCHAR2 AS
BEGIN
select requestString from tableName where pkName=pkValue;
RETURN NULL;
END;
myfunction('users', 'user_id', '100', 'user_name'); it will select 'user_name' from table 'users' where 'user_id' = '100'.
This way could save lots of coding. but it can't pass compiler. how to work out ?
Thanks.

While this may save code, if used frequently it will be ineffecient as all [explicative deleted]. The danger is that it would be used even for repeatable statements.
This mode of operation ensures that every statement [calling the funciton] needs to be reparsed, which is extremely expensive in Oracle (in CPU cycles, recursive SQL and shared pool memory).
Such reparsing is rarely a good thing for the environment ... it could easily lead to buying more CPU (bigger box) and therefore adding more Oracle license ... which could quickly exceed the typical developer's salary.
However - if you really, really want to do this, look up 'execute immendiate' in the PL/SQL manuals.

How to select different Querys based on Variable Value

Hi guys i need to know how to select different Querys, based on variable values selected by the user, i try to do it using a Web Template but i don´t know how to program a Dynamic Query.....
I hope sombody could help me with this
Message was edited by: Oscar Diaz

Hi Diaz,
Can you explain the exact scenario which you are looking for!!!
regards
Happy Tony

How do I change the query based on parameter value

hi,
Based on parameter value I want to change my query. If paramter value is 'O' i want the 'order by depno' in query if the value is null i don't want the order by clause.
How do I achieve this.
Thanks
Ram

U can use lexical parameter
i.e u create one user parameter and in query
u use this parameter with &param_name
ex.
select val,prize from stock where sr_no > :srno
orderby &ord_by
here ord_by is lexical parameter
and set its intial value to 'sr_no'
so u can get result order by sr_no
this parameter is set from form so u will give condition in form and depending
on condition u will pass this parameter from form.

How can we restrict EQL result based on session value

How can we restrict EQL result based on session value or by checking with EBS secured function?
Example: I create a Item Search Dashboard but I have more than one inventory organizations and I want to restrict dashboard to bring inventory org respective data by validating responsibility/profile option.
Can anyone help me on this or if my concept is wrong so can anyone please guide me?

Hi Bob,
Thank you. Sorry for the late reply but I was busy in other stuff. I did the jar file and copied that Jar file into .ear/APP-INF/lib and copied on server and updated the df.securitymanager property under framework settings on Endeca Studio and restarted Endeca Server and Studio but seems like my class didn't get read. Kindly suggest and find below snippet of code;
public void applySecurity(PortletRequest request, MDEXState mdexState, Query query)
throws MDEXSecurityException
init(request);
String remoteUser = request.getRemoteUser();
String recordFilterExpression = "XX";
if(recordFilterExpression != null) {
DataSource ds;
try {
ds = new DataSource(request, mdexState.getId());
try {
ExpressionBase expression = ds.parseLQLExpression("FND_USER_NAME='" + remoteUser + "'");
DataSourceFilter dataSourceFilter = new DataSourceFilter(expression);
} catch (Exception f) {
throw new MDEXSecurityException("Unable to apply Expression", f);
} catch (DataSourceException e) {
throw new MDEXSecurityException("Unable to create DataSource", e);

How do I access a value of a variable in SSIS and control the flow accordingly based on its value?

So I have a Foreach Loop Container that Enumerates a read Excel spreadsheet and this Foreach Loop get its User::SheetName. Can I change my flow accordingly based on the value of the User Variable User:SheetName that is dynamically valued by the Foreach Loop
Container? So if the User::SheetName is "Enrolled", I want to load that worksheet to a certain SQL Server Table using an Excel Source and OLE DB Destination and if the User::SheetName is "Engaged", I want to load its worksheet contents
to a different SQL Server Staging Table. What Task can I use to determine the value of User::SheetName or am I going to have to write a C# script to do this?
Any help and/or suggestions are GREATLY appreciated.
Thanks!

Hi ITBobbyP,
According to your description, you want to read data from excel by using the Foreach Loop container with the appropriate enumerator. If that is the case, please refer to the following steps:
Inside the ADO NET enumerator, add a data flow task.
Inside the data flow task, add an Excel source.
Open the Excel source, and point to the Excel data source set up in the file enumerator.
Select one of the sheets that shows in the drop down.
Close the Excel source.
Select the Excel source.
In the properties window, copy the name of the sheet you selected. It's in the 'OpenRowset' property.
Set this as the initial string in your sheet name variable created to gather the sheet name from the ADO NET enumerator.
Select the Excel source.
In the properties window, change the 'AccessMode' to OpenRowset from Variable. This will change the property 'OpenRowset' to 'OpenRowsetVariable'.
Change the 'OpenRowsetVariable' to the variable created to hold the sheet name via the dropdown.
Open the Excel source. You should see your variable as the sheet name.
Click the 'Columns' tab to verify you can connect and mess with columns.
For detail information, please refer to the following document:
https://technet.microsoft.com/en-us/library/ms345182.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

How to open network tab in developer tool and filter based on a value in C# selenium webdriver

Hi,
I am using selenium webdriver in c#, is there any way i can open the network tab of developer tool for the opened page, filter based on a value, and click on the event where i can check the value of the variable
Sample code woulb b helpful
Thanks,
Prahal
if not possible wat is the best way to automate web analytics

Hi Prahal,
Thank you for posting in MSDN forum.
Since you are using Selenium WebDriver which is third-party product, the issue is out of support range of Visual Studio testing forum. I suggest that you can consult your issue on Selenium support:
http://docs.seleniumhq.org/support/ for better response.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to select a different value based on $FLEX$ Value set

Hi friends,
am getting a column like position from positions_table....
now based on this value set am selecting another column from the same table like for ex amount...using $FLEX$.vlaueset_name
now if the value in the table is 0 or null I should make the field available for the user to enter something
as of now it is not letting me enter any data as this value is based on the first value set we defined..
is there a way to do that..
hope am clear in specifying my requirement
thanks

Hi Balraj
I want to select one list item value from yyy based on the xxx item value..Pls use the following andreas's link ( it's about it)
http://andreas.weiden.orcl.over-blog.de/article-28957008.html
pls study it carefully and develop.
Hope it helps...
Regards,
Abdetu...

How to tpalloc() based on sizeof() value?

Similar Messages

Maybe you are looking for