How to transport distribution model

hi i am having doubt in distributing model.
is it possible to transport distribution model?
if yes.
1. in real time where distribution model is created i.e in production or development system.
2. is it correct way to create distribution model directly in production system.
3.if it created in development system how to transport it.

Hi,
You never transport the distribution model.
Usually it is done by distributing the model (BD64) through RFC connection (let's say from DEV -> QA). It depends on your company procedures. Some company maintains in each client (DEV, SANDBOX, QA, PROD).
For PROD distribution model, I would recommend to setup manually instead of distibuting from DEV for security of data integration and interface purposes. If you allow to distribute from DEV to PROD, you could easily make a mistake either over write/change the existing production model interface and can caue production error/issue.
Hope this will help.
Regards,
Ferry Lianto

Similar Messages

How to transport organization model

Hi Experts...
how to transport organization model from development server to testing server in CRM FUNCTIONAL MODULE.
Thnx..

Hi ,
Refer to this thread:
[Transport of Organization Structure;
Cheers, Satish

How to transport the distribution model from devlopment to quality in idocs

Hi ,
I am developing settings for idocs for the basic idoc type 'MATMAS03'.
By using SM59 , I gave the connections of two logical systems.
I created the distribution model by using BD64. when I generate the partner profiles , automatically, port and partner profiles are created.
How to transport from DEV to QUALITY of RFC connections, Distribution model and automatically generate partner profils and port ?
Plz give me the answer in broad way
Regards
NTR

hi,
Refer to this link...
how to transport distribution model

Transporting ALE Distribution Model to a Target System

Hi,
      How do I transport an ALE Distribution Model from a Development System to another target system
      While transporting, how do I ensure that in the target system, the ALE Model points to the correct partner system?
      e.g. a Dev System1 points to a Dev System2. Hence a QA System1 must point to QA System2.
        When I created the ALE Model, the system prompts for a transport request, so there must be a way to transport the same
Regards,
Aditya

Hi Aditya,
In my experiences, we always maintain manually the distribution model and partner profile in our production system due to data integrity and security reasons.
However, we always maintain the distribution model and partner profile for QA system from development system via transaction BD64.
For logical system name, you need to tranport from DEV -> QA -> PROD system.
Hope this will help.
Regards,
Ferry Lianto

How to restrict the idoc creation based on the distribution model

Hi all,
I want to create the idocs for certain material types only, for this i configured Distribution model and set the filter for material types.
If the delivery is created with the material type which is not in the filter means,
Idoc is creating for that Delivery with header segments only and restricting Item level segments.
it is coming to XI and failing in mapping every time.
I do not want to generate the whole idoc itself. Am i missing any thing??
Regards
Edited by: Suman gupta on Jun 10, 2010 11:13 PM

Hi Mike,
>>config in PI in the routing condition - if no lines exits don't send the message to the mapping/receiver
If no lines exists we can restrict don't send to receiver, but how can we restrict dont send to mapping??
It comes to mapping and failing in PI MONI.
Is there any way that i can restrict the Idoc generation itself in ECC ??
Regards

How to add BAPI in ALE-distribution model?

HI all,
I have to send The post goods issue through ALE-IDOC, this have to create the Goods Receipt in the receiving side.
I came to know that the message type for this is MBGMCR , when i am trying to add this in the distribution model , it is prompting an error message that this message type belongs to BAPI.
So , to send the required data , i have to add the BAPI.
Please help me clearly on how to add this and what are the steps involved in distributing data through BAPI ?
Thanks,
Vamshi

In we20
process code will be BAPI and setting will be same as in other process codes
in bd64 i have example..
TCode BD64
Add ADRMAS in Distribution Model u2018TestERDToEXDu2019 as follow:
Click on u2018Add BAPIu2019 Buton.
Give Object Name as AddressOrg
Give Method Name as SaveReplica
You will get a entry as follows
Edited by: Madan Gopal Sharma on Jul 1, 2008 9:02 AM
Edited by: Madan Gopal Sharma on Jul 1, 2008 9:04 AM

How to maintain Customer distribution model in ALE

hi FRIENDS..
i wish to know what will be the transaction code of maintaining the customer distribution model, and how we maintain it. and also distribute custome model in IMG sreen... please reply me...i will surely award you nice points....
bye...
naim

U can create/maitain distribution model using BD64.
Or else u can create it using SALE transaction code.
U need to give sender/reciver/msg type.
==============================================
procedure:
click on Create Distribution model button-->give the technical name
select the DModel Technical name>add msgtype>
it will ask sender/reciver/msgtype.
pass those parameters and generate partner profiles through environment menu
=================================
to distribute a model view to partner syste,:
Select mview
edit>modelview>distribute
Message was edited by: Eswar Kanakanti

How to setup message type in existing distribution model?

hi,
how to setup (add) message type in existing distribution model?
thanks & regards
Ruban

Hi,
Please try these ...
1. Go to transaction BD64.
2. Click on Change button (F9).
3. Place the cursor to the corresponding model view.
4. Click on Add Message Type button (CTRL+F7).
5. Enter the corresponding Sender, Receiver and Message Type then click on continue button.
6. Click Save button (CTRL+S).
Regards,
Ferry Lianto

How to create a data filter for BAPI used in a Distribution Model ?

I am trying to create IDOC's for a QM inspection plan via message type QPMK in ECC 6.0. When creating the new message type in the Distribution Model, it forced me to use a BAPI (MasterInspectionChar) rather that just the message as I have done in the past. In order to ensure that only IDOC's related to a specific plant and material type get sent out, I was trying to create a filter.
I am able to get into a 'Change Filter' dialog by double clicking 'No data filter set' under the node 'MasterInspectionChar.SaveReplica'. However, an attempt to highlight anything on this dialog and clicking button 'Create filter group' results in msg. 'Select node: Content-dependent parameter filtering'.
Online help led me in a different direction, one thread led me to believe I needed to create a table entry for the filter in table TBD16 via BD81 for later attachment to the BAPI in the Distribution Model. Before this, I created two Z* ALE Object Type records for plant and material type in table TBD11 via BD95 for what I thought would provide a lookup back in BD81 for creation of a new filter record, but these objects are not found. Per the help, I am also unclear as to whether I would need to set up Receiver determination or Parameter filtering, nor where to make this step in the configuration happen?
Can anyone point me back in the correct direction to get a data filter set up for this BAPI within the Distribution Model ?
Thanks - Mike

Just to clarify, what I am having trouble with is finding where exactly to plug in the name of the plant to be filtered? If using a message type such as MATMAS in a distribution model, it is very straight forward to navigate down from the 'Data filter active', and assign a value to whatever field you wish to filter via the 'List of Values'. But in this example, message type QPMK required use of the BAPI MasterInspectionChar, and therefore the different method in creating the filter.
I cannot find similar functionality when navigating the BAPI related row, for MasterInspectionChar. The 'Change Filter' dialog popup displays a row for 'Container' and then 3 more rows containing 'BAPI structure...'. Clicking the 'Attribute' checkbox on any of these rows sets 'Data filter active' as a node under the BAPI. Double clicking the 'Data filter active' brings me back into the same dialog, and selecting any row with an attempt at this point to create a filter results in the 'Select node: content-dependent parameter filtering' warning. Is this warning occuring because of missing configuration?
Thanks - Mike

Copy Distribution model from non changeable client to new system

Hi EDI-Experts,
Help me.
How can I easily copy a distribution model from a nn-changeable client to w new system.
Example: DEV client 110, Test client 150 (with valid distribution model), new syste, QAE,cleint 200
How can I transport the distribution model from client 150 of DEV system to 200 of QAE system.
How does the generation of the partner profiles work then?Anything to consider?
!! Client 150 of DEV is not changeable !!
Many thanks
JW

Goto Transaction BD64.
In the Menubar Edit -->Model View --> Distribute
Transport
U have the option of distributing ur Model view to another client.
Hope this helps.
Regards,
Mithun
Edited by: Mithun Shetty on Jul 16, 2008 8:33 PM

Cannot find the Recv Logical system in Distribution Model

HI experts,
Im triying a Idoc to file scenario, the logical system for PI and R3 has been already created and assinged for the appropriate clients.
and i ve created the port from r3 using tcode we21 and in PI using idx1 and Idx2. The RFC destination also created for PI and R3 system.. when i created the distribution model using BD64 in R2. when i assigning message type i can give the source logical system and i cant find the Receiver logical system... Also in WE19 i cant find the receiver port (which i created in IDX1 and IDX2)..
Could u tell me how to solve this prob???
Regards
Balaji

Hii Ravi,
Thanks for your reply,
Yes i have created the port (RFC800) idx1 and give RFC destination which points the R3 system.
I have assigned the meta data to that port using tcode idx2.
And I have created port with port name "PORT800" in R3 using we21 and give the RFC destination which points the PI system
when im using the WE19... i gave source logical system as R3 Logical system and receiver logical system as PI Logical system.
now im getting error like "PORT RFC800 DOESNT EXIT IN THE THE TABLE OF PORT DISCRIPTIONS".
Regards,
Balaji
Edited by: Balaji Pichaimuthu on Jul 25, 2009 9:32 AM
Edited by: Balaji Pichaimuthu on Jul 25, 2009 9:32 AM

Transporting a model in VC from higher version to lower version

Hi All,
How can i transport a model built in higher version to lower version.(EHP1 to 700.14 of Portal)
Also, will all my fuctionality work there if it is transported?
I have imported a model built on higher version of Sandbox to lower version of Dev server by changing its version manually by opening the model in notepad.But after deployment i am not able to see any of the functionality working.Such as-I am not able to submit the data enetred in the data fields.
Please help.
Thanks & Regards
Richa

Adding some points to the above question.
Also,I cannot clear entries from the data fileds, as there is not System Action defined for clear in version 700.14.
Please suggest,what changes shall i make.
Thanks & Regards,
Richa

Material Master Change Pointers/Distribution Model - any suggestions?

Dear All,
Hope everyone is doing good.. I have been trying to come up with a solution for the below issue, but didn't get any further. Your help is highly appreciated.
Initial Design:
Couple of years before we had a plant 123 and plant 456 where we need to send the materials. So we had specified these plants in Distribution Model and things worked fine.
First Problem
During testing what we have found out was, if some one changes MARA level, IDOC is being created but it's not being sent out of SAP system because the IDOC doesn't have 123 and 456 plants which the distribution model filtered it out and no data got sent to SAP PI.
Solution implemented:
After doing lot of analysis and research we have implemented solution as per the blog The specified item was not found.
Today's problem
There are couple of more plants we were supposed to send the data 789 and 678. The problem is if some one did a mass change on plant 456, the above solution implemented takes all the data(not the deltas) and pushing it out. Even though the change is only on 456 plant, we were unnecessarily sending the data to 789, 678 which is causing lot of problems.
Now we realize we shouldn't have gone with the solution mentioned above, because it's not applicable in my scenario.
Does anyone handled this kind of scenarios in the past, if so can you please shed some lights?
Thanks,
Raj

Hi Raj,
As per my experience what you had already implemented, that is absolutely correct. I don't think there is any alternative to send the data as a whole (I understood if you are not sending the Plant data, how the middle ware filter them).
Now your requirement is if you make some mass changes in the materials which are extended different plants other than 456 plant, we have to restrict them. To restrict the outbound Idocs for MATMAS. you can use the Filter option in BD64 (Distribution Model). Here after creating the Filter Group, you can edit LOV for Plants.
Once your mass changes transmission is over, you can remove this.
Hope this will work, at least you can give a try...............

Query related to filter group on matnr created in ALE distribution model

Hi All,
I have query related to filter group on matnr created in ALE distribution model.
I have created a filter group on matnr in ALE distribution model and put the value E* ( purpose is that all the material number started with E should be triggered in case of any changes in the material).But it is not working.
<b>Can anybody suggest the solution for this i.e how to capture E* value for the material master changes and should trigger idoc using change pointer using BD21.</b>
Thanks & Regards
Prabhat

Unfortunately, you cannot filter using wildcards or exclusions. You have to explicitly list each allowed value in its entirety.
In my opinion, the simplest solution would be to copy function MASTERIDOC_CREATE_SMD_MATMAS, modify it to handle your custom filtering and update the message type entry in transaction BD60.

Problem with distribution model receiver ports

Hi,
I am facing a problem with distribution model.
I am using Distribution model for material classification data. I am sending my classification data using CLFMAS message type to one of the receiver. Again another person also sending classification data to another receiver.
But both objects will run at different times.
Problem is for every run and every change it is creating 2 idocs instead of 1 idoc.
I am able to create an IDOC with my changes for classifications. But it is creating 2 idocu2019s instead of creating 1 idoc. Because of there is another distribution model with same message type with different receiver port has been configured. I.e. reason it is creating 2 idocu2019s and sending to both the revivers.
When I run my changes It needs to create 1 idoc and send to my receiver port. If another person run his job it needs to create another idoc.
So how will I filter distribution model based on receiver port? it needs to create only 1 IDOC ..

Hi kotesh,
A similar issue.
check if this will help.
Do the following:
Go to TOOLS>ALE Development>IDoc Type Development> WE81 and create a new message type and give it a different name - say ORDERS2. Use WE82 to link it to an IDoc Type - say ORDERS05. So now you will have two message types linked to the same IDoc type. Each message type can now be referred in different logical systems without any clashes.
Now you can use BD64 to build your model using message types ORDERS and ORDERS2 without getting the multiple recepient error message.
Then use WE20 to set up each partner profile using your defined output conditions in message control to trigger the creation of the IDoc. Now you will beable to send the same Idoc type to different recepients.
source:http://sap.ittoolbox.com/groups/technical-functional/sap-interfaces/sap-distribution-model-3008763
Regards,
SuryaD.

How to transport distribution model

Similar Messages

Maybe you are looking for